Photo Booth photos not saving automatically to photo roll on iPad
Ipad2. Since update to iOS 8, the pix I take in Photo Booth do not automatically save in "my photos", so i cannot use those photobooth pix within other apps. How can I fix this?
Thanks.
Greetings dunaitis,
After reading your post, it sounds like you are experiencing an error when taking photos. You may want to consider restarting the device first, and then resetting if that does not work. This article provides detailed instructions for Restarting, and Reseting:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
How to restart
Press and hold the Sleep/Wake button until the red slider appears.
Drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
How to reset
You should reset your device as a last resort and only if you can't restart it.
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D
Similar Messages
-
Photo Booth is not saving pictures in the folder
Hey,
I am facing some issues with my Photo Booth! I am able to take pictures and they drop down to the bottom of the photo booth window, but when i check the folder in ‘'pictures'' its always empty. Before the pictures which were taken got automatically saved in the folder, now nothing happens.
I hope someone can help me out.
SofiaHello sofia62,
After reviewing your post, it sounds like you want to have the pictures taken in PhotoBooth to show up in Pictures. I would recommend that you read this article, it may be able to help the issue.
This article says 4.x but these step still work to export in version 7.
Photo Booth 4.x: Export a Photo Booth snapshot or video clip
Click the thumbnail and choose File > Export, or Control-click the thumbnail and choose Export.Specify a filename, select a location for the file, and click Save.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Hi all. Since updating my iphone 6 a couple days ago, I have discovered awful glitches in photos. When I save photos they do not get added to my camera roll. My Camera Roll and Photo Stream used to match. I would take a photo on the camera and I would see it on my photo stream. Yesterday, I added an edited photo to my camera roll by saving it (I thought). But it was not there. In the past, if I wanted a photo to post in any app, from Twitter to Facebook to Yelp, in order to retrieve it easily (if I had a lot of photos on my phone) I would sometimes text it to myself and then save it. It would be added to my camera roll. Then, when any app asked me to upload a photo, I could find it right at the beginning of my camera roll photos. Now, when I save a photo it does not appear on my camera roll. I discovered this yesterday when posting a Yelp review. I found the photo I wanted to use on my camera roll and it was way back at the beginning of the camera roll. I edited the photo. I saved it. It did not get added to my camera roll. So then I looked for the photo on the camera roll where I had originally found it way back at the beginning. The edited version of the photo was gone. Could not find my photo to upload to Yelp. Then I discovered it was the same with every other app on the phone.
PHOTO STREAM DISAPPEARED! This was my main problem and primary question until I tried to resolve the issue. I saw a message on my phone that said (I thought) that I needed to connect my phone to my laptop to restore icloud backups. So I manually connected my phone to my Mac Pro Laptop (2011) and backed up my photos. I made sure iCloud was turned on for photos. I have it set to Download and Keep Originals. It is also set to Upload to My Photo Stream. And iCloud sharing is turned on.
WHEN I connected my phone to my computer I got a message on my phone about setting it up for personal hotspot and it would not complete the update unless I replied. At first i did set it up, but it seemed to be an issue, so I simply let my phone and computer use my home wifi network. I don't need the personal hotspot, but it seemed to affect the photo issue further.
Now where I used to see Photo Stream and Camera Roll, it simply says All Photos. I am extremely confused. This is a mess. Any suggestions would be much appreciated!I restored it twice, once from icloud backup and then from my computer back up. I just restored again and set it up as a new iphone and now my photos are saving again. I was then able to sync apps and music from my itunes to my phone... So happy you wouldn't believe!!
-
My photos in photo stream do not refresh automatically on my PC even when online.
When I take a photo with my phone is does not update automatically to my PC and IPAD even when they are all connected to wireless. I have to shut off the photo stream and turn it back on, even then it does not always work.
Your photos are not shared automatically. You must select photos and share them with others manually.
-
Isight works with photo booth but not in ichat or google talk or skype?
isight works with photo booth but not in ichat or google talk or skype?
Hi
Is this an Internal or External iSight ?
In iChat, in the Video Menu (This is to the right of Buddies and may read Audio) is Camera Enabled Ticked ?
If it reads Audio open the Connection Doctor from that same menu.
In the connection Doctor open the Capabilities tab
Does it say your Internet Connection is too slow ?
At this point I would need to know which iChat Version.
However also look in the View Menu.
Is Show VIdeo Status ticked ? (this shows green Icons next to your Buddy Pic and those of your Buddies
Next go to the iChat Menu > Preferences > Video Section
Do you see a preview here ?
Re: GoogleTalk
Have you enabled TALK on your Google Account Settings ?
You need to have a Google Mail ID (Not any other sort of Google ID)
Have you downloaded the Intel only Web Browser Plug-in to do Video in a Web Browser.
10:48 PM Tuesday; August 30, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Photo booth is not opening after installing maverick
I updated my computer to Maverick and now photo booth is not opening. I could care less about the application itself but there are pictures that I really do not want to lose. It says that "You can't use this version of the application "Photo Booth" with this version of OS X. You have "Photo Booth" 3.0.3." I can't find any information on updating the application and I can't find any way to recover the pictures from the application. Please help.
You're trying to open an outdated copy of the application. Delete the copy and use the one in the Applications folder. Never move or copy built-in applications.
-
Mail, preview, photo booth, will not open
After installing Leopard (on my 3rd attempt, clean install) mail, preview, and photo booth will not open at all. i'm opening them from the applications folder, not from the dock. i get an error message that says the programs unexpectedly quit. hopefully i don't have to do another installation. 3 is enough.
i thought it was interesting that these 3 programs are in order alphabetically, and every other program has opened fine.
any help/ideas would be greatWelcome to Apple Discussions:
You might check whether this is a preference corruption issue. For example, you can find the Mail preference file in [Username]/Library/Preferences/com.apple.mail.plist
Drag this file to your desktop (so you don't lose it). Then try relaunching Mail. If that works, a similar process might fix your problem with the other applications, too.
Please post back here if that helps. If it does, please mark this posting as having "Solved" your question. Thanks -
Photo booth camera not conected
I keep getting "camera disconected " in photo booth i leave the computer in sleep mode most of the time.I have to restart, for the camera to work again then it disconects itself when photo booth has not been used for a while ?
Any other camera applications such as iChat open? I think the camera is attached to the USB bus, do you have any non-Apple devices connected to the USB bus that may not like the power drain of Energy Saver after it turns on (i.e. the machine goes to sleep)? This can cause cascading issues down the whole USB bus.
-
Hi all !
Everything was working perfectly and since my last update, photo booth doesn't want to start :
The error message is as follow :
"Photobooth ne peut pas s'ouvrir
La carte graphique installée dans cet ordinateur ne prend pas en charge Photo Booth."
Translated :
"Photo booth can not be run :
The graphics card installed in this computer does not work with Photo Booth."
I tested other apps and it works fine
Need help !
Thanks a lot !Hi,
I think I'm having the same problems as the OP. When I click on Photo Booth to open, I get an error message that says:
"Photo Booth cannot open
The graphics card installed in this computer does not support Photo Booth."
The built-in iSight camera appears to be working fine with iChat and Skype, it just refuses to work with Photo Booth, it's worked perfectly for the last 2 years, I don't understand why it's doing this now.
Could you please provide me with a step by step guide on how to fix this problem.
Thanks!
Any help is much appreciated. -
Photo Booth will not open. My camera works well with other apps.
Photo Booth will not open. My camera works well with other apps.
try running it in either 32 or 64bit mode and see if this changes the experience. Locate the icon in Finder, right click "get-info" on it and see the checkmarks "run in 32bit mode" ..
on Lion some users had trouble opeining pb when "iglasses" was installed, also a thing to check.
Else repair permissions of the disk, using Apples disk utility app. -
I'm restoring a new iPad 2 (shattered the original). Backed it up on the iCloud and have restored all apps, music, photo albums, etc. However, the photo stream has not activated, so no photos have downloaded. Photo Stream is fine on my Iphone and Mac.
Hello there, Tamghosh.
The following Knowledge Base article provides some good steps to use for troubleshooting the issue you're describing:
iCloud: Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Particularly:
I don't see photos in Photo Stream on my iOS device.
Check the following:
From your Home screen, tap Settings > iCloud > Photo Stream, and make sure the slider is set to the ON position.
From the Home screen, tap Settings > Wi-Fi, make sure the slider is set to ON, and that your device is connected to a wireless network.
Ensure that Camera app is closed on the device where you took the photo. Photo Stream will not upload photos from an iOS device until the Camera app is closed.
Ensure your iOS device has not fallen below 20% battery power. To preserve battery life, Photo Stream downloading and uploading are disabled when the battery reaches this threshold. Downloading and uploading will resume once you charge your device, and the battery charge is greater than 20%.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
Photo Booth is not detecting iSight
In the last couple days, whenever I have opened Photo Booth to take a picture, it doesn't automatically turn on my iSight camera. however, the camera works fine in iChat. When I click on the "Camera" menu when Photo Booth is open, it has the Built in iSight camera selected, but the green light does not turn on and I only have a black screen and can't take a picture.
help??http://support.apple.com/kb/HT2090
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
Photo booth does not work in mountain lion?
When I try to run the photo booth app. It will not load in mountain lion, the camera light comes on and sometimes it opens with a red screen. Any one else have this issue?
This is what I get in the console...
08/11/2012 18:18:44.200 spindump[7458]: Saved hang report for Photo Booth version 5.0.1 (307) to /Library/Logs/DiagnosticReports/Photo Booth_2012-11-08-181844_Macintosh.hang
08/11/2012 18:18:50.977 Photo Booth[7475]: Initializer-based scripting additions are no longer supported. "/Library/ScriptingAdditions/LCC Scroll Enhancer Loader.osax" not loaded.
08/11/2012 18:18:50.978 Photo Booth[7475]: Error loading /Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScript ingAdditions: dlopen(/Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QX PScriptingAdditions, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/QXPScriptingAdditions.osax/Contents/MacOS/QXPScript ingAdditions: mach-o, but wrong architecture
08/11/2012 18:18:51.305 Photo Booth[7475]: *** EXCEPTION IGNORED: -[QCParameterInfo initWithType:size:]: Argument "aSize" does not verify "((aSize > 0) && (aType != kQCProgrammableType_Skip)) || ((aSize == 0) && (aType == kQCProgrammableType_Skip))"
08/11/2012 18:18:51.306 Photo Booth[7475]: *** Failed creating composition from "/System/Library/Compositions/Mesh Bulge.qtz"
08/11/2012 18:18:51.996 quicklookd[7477]: [QL] Can't get plugin bundle info at XTUM/ -- file://localhost/private/tmp/
08/11/2012 18:18:52.583 Photo Booth[7475]: *** EXCEPTION IGNORED: -[QCParameterInfo initWithType:size:]: Argument "aSize" does not verify "((aSize > 0) && (aType != kQCProgrammableType_Skip)) || ((aSize == 0) && (aType == kQCProgrammableType_Skip))"
08/11/2012 18:18:52.613 Photo Booth[7475]: *** Failed creating composition from "/System/Library/Compositions/Mesh Jiggle.qtz"
08/11/2012 18:18:52.620 Photo Booth[7475]: *** EXCEPTION IGNORED: -[QCParameterInfo initWithType:size:]: Argument "aSize" does not verify "((aSize > 0) && (aType != kQCProgrammableType_Skip)) || ((aSize == 0) && (aType == kQCProgrammableType_Skip))"
08/11/2012 18:18:52.620 Photo Booth[7475]: *** Failed creating composition from "/System/Library/Compositions/Mesh Noise.qtz"
08/11/2012 18:18:52.626 Photo Booth[7475]: *** EXCEPTION IGNORED: -[QCParameterInfo initWithType:size:]: Argument "aSize" does not verify "((aSize > 0) && (aType != kQCProgrammableType_Skip)) || ((aSize == 0) && (aType == kQCProgrammableType_Skip))"
08/11/2012 18:18:52.627 Photo Booth[7475]: *** Failed creating composition from "/System/Library/Compositions/Mesh Twist.qtz"
08/11/2012 18:18:52.631 Photo Booth[7475]: *** EXCEPTION IGNORED: -[QCParameterInfo initWithType:size:]: Argument "aSize" does not verify "((aSize > 0) && (aType != kQCProgrammableType_Skip)) || ((aSize == 0) && (aType == kQCProgrammableType_Skip))"
08/11/2012 18:18:52.632 Photo Booth[7475]: *** Failed creating composition from "/System/Library/Compositions/Mesh Wave.qtz"
08/11/2012 18:18:52.690 Photo Booth[7475]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces. -
Photo Booth does not turn on iSight
iChat and iMovie will both turn it on, so I know it's not a hardware problem, but I can't get Photo Booth to turn it on. If i press the button to snap a picture, it goes through the motions, "Flashes", and I get a black picture since the iSight never turned on.
Things I have tried so far
repair permissions
full restart
deleted PH's .plist file in my home directory
reinstalled from the original DVD
and finally, logged in as a new user, where it still failed, so I know it's not a problem in my Home directory.
Does anyone have any suggestions as to what else I can try?
Oh, and yes, it used to work fine, but I haven't had a need for PH in several months.
Thanks in advance for any help, or suggestions on what might be a better forum to pose this in if this wasn't the best choice for a software problem!Welcome, J Coffle
I think you are in a good place, but I imagine you will only think it is the right place if you get your problem solved. At any rate, if I can think of a better place, I will let you know.
First, what is "PH"? Assuming you mean "Photo Booth", I will offer a couple of suggestions for your consideration. If I am wrong, stop here and post back the correct meaning.
You have tried several good things. Here are a few more you can consider.
(1) Disconnect all peripherals while you do your testing to rule out possible conflicts.
(2) Check for any running applications, Login Items, or widgets that can use your iSight. (It is easy to forget widgets like Mirror in your Dashboard.) As explained in Apple's iSight "Your camera is in use by another application" message, iSight can be used by one application at a time.
(3) Try every relevant Built-in iSight suggestion in How to Troubleshoot iSight.
(4) If resetting or the other troubleshooting suggestions do correct your problem, try the following:
- Backup your Home Folder, or at very least, your important files.
- Repair permissions.
- Then download and apply the Mac OS X 10.4.10 Combo Update (PPC).
- Perform another Permissions Repair.
- Then check Photo Booth again with no other iSight apps running.
Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying the latest Combo Updates.
If you can recall anything significant that might have changed since Photo Booth last worked, what changed would be helpful to know if you must post back for more ideas.
EZ Jim
PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight -
Photo Booth flash not working in Maverick or Yosemite
I have noticed that the photo booth flash in Maverick on my Macbook Pro and in Yosemite on my iMac is not working Screen flash is enabled on both.
So this is happening on two different computers. Does anyone know how to fix this? All my photos are so dark on both of my computers using Maverick and Macbook Pro.
It works fine on system 10.6.8 though.
Has anyone else had this problem too?
MarthaIn case anyone is interested in your screen flash not working in the Yosemite or Maverick photo booth application, I finally called Apple today and he kept insisting it was working on his - I asked him to take a pic with the screen flash enabled and then disable it and he said it came out the same. And rationalized that it was because he was in a well lit room. I kept telling him in my old photo booth from system 10.6.8 that my face was lit up and my husband had reflections from his glasses so we went from him wanting me to reinstall my software (I refused since both computers were having the same problem - one using Yosemite and the other using Maverick) to him finally going into HIS partitioned disk that has system 10.6.8 on it to discover that the flash there reflected off HIS glasses too. Bottom line is he admitted there has to be some flaw that prevented the photo booth flash from working for Maverick and Yosemite. Whew, finally validation!
Martha
Maybe you are looking for
-
I connected my new iPhone 5 to my (now fully updated after two separate operating system upgrades!) MacBook Pro so that I could add my music to my new phone. Rather than configuring it as a new iPhone, I chose to configure it as my old iPhone, think
-
I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?
-
Passing column headers in cl_gui_frontend_services= gui_download
How to pass the coulumn headers in in the internal table while down loading it to a excel file by using method cl_gui_frontend_services=>gui_download
-
Embed HTTPService in a visual component
I want to create a visual component with a top element <mx:Canvas>. This component needs to retrieve some data from a remote server, however <mx:Canvas> can not contain <mx:HTTPService>. Which components can contain <mx:HTTPService>? I know <mx:Appli
-
Keep getting " identifier expected" error
I keep getting that error, but I have not code which requires use of an <identifier>. I've been staring at this screen for like 3 hours now and I cant figure it out...Any help is greatly appreciated public class ConTest Scanner scan = new Sca