Photo Booth playback of video recording doesn't works

Hello !
I have a problem with the playback function of recorded videos in Photo Booth.
My machine is an iMac late 2007 with Mountain Lion on it.
Well ! It's possible to create a video with Photo Booth. But if I like to playback the record in Photo Booth, I only see a black screen inn the Photo Booth window.
Any solutions for me?

Hello namzo !
May be it will be solved in the next Mountain Lion update.

Similar Messages

  • Why does photo booth cut my videos short?

    why does photo booth cut my videos short? It is annoying as ****. I want to make at least a 2 minute video, but cuts off at 20 seconds or some other random and rediculously short time, sometimes 1 or 2 seconds!!!!! What the ****?!

    candacefrommontreal wrote: why does photo booth cut my videos short?...
    Because you ********* * ***.
    All you have to do to make it work is **** ** ******* ****.
    Or: http://discussions.apple.com/message/13305215#13305215
    Message was edited by: EZ Jim

  • Video call doesn't work on iphone 6 iOS 8.1.3

    I have a iphone 6 with iOS 8.1.3, updated skype to version 5.10, all functions works fine but video call. the icon of video call doesn't respond (it stays blue when you click it), camera was turned on in setting also under privacy, I can use camera to take my photo for screen photo, that means the camera was setting correctly, but only video call doesn't work, can anyone help? Thanks a lot in advance.

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • My video recording sounds not working but other sounds are working fine, I've tried clearing the little mic thing near my earphone hole and had no success can someone please help me out?

    hhi guys
    my video recording sounds not working at all but it's working for other things such as music. I've tried to clear my sound thing near the earphone hole but had no success can someone please help me out?

    Had an Iphone 4 for about 3 months now. This happened to the first one I had and they ended up having to replace it at the apple store just a couple weeks ago 6/2. It happened again last night to my new one. This time i was able to correct it by going to itunes, backing up the phone to icloud, and then restoring the software. Mine did not work with voice memo, but did work with headphones plugged in, and would also work on speaker. I could hear callers but they couldn't hear me. I had purchased a new case (lifeproof case at $79.99) because it comes with plugs that cover the headphone jack, and the charging port, and is also waterproof. I heard that the root cause is due to lint, dirt, etc getting inside the headphone jack. Well, must be something else. It's a 10 days old phone, and has been in this overpriced case the whole time, and I have not used the headphones. I hope this doesn't keep happening.

  • Video audio doesn't work

    video audio doesn't work
    video runs but no sound
    please help

    ITunes uses Quick Time to convert. Quick Time cannot convert MPEg (Muxed) Files. Read this:
    Quick Time: Using MPEG 1 and MPEG 2 Files:
    http://docs.info.apple.com/article.html?artnum=61608
    Again:
    It is not possible to export the audio portion of a muxed MPEG-1 or MPEG-2 audio/video stream using QuickTime.

  • Video clips doesn't work in new keynote

    I recently upgraded keynote after installing os x maverick.
    When I opened my previous keynote presentation, the new keynote asked to upgrade the movie quality.
    And you have to click this option, otherwise the video clips will only come out as pictures.
    But now, some of the video clips doesn't work.  The thing is, I do not have the original video files as these are presentations given to me by others.
    What's next for me?

    Having the same problem, would greatlyu appreciate a fix. does it matter if one upgrades to the iOS or Mac Keynote options?

  • Video out doesn't work anymore

    The video out doesn't work properly any more on my G4 12inch powerbook. It had been working fine, but now it doesn't work properly with either of the mini-vga adapters that came with my powerbook. When using the mini-vga to composite/s-video, the image appears on the tv but there is no colour and the picture isn't stable at any resolution over 800 x 600.
    When connecting to a monitor or projector using the mini-vga to VGA adapter, the image appears on the screen etc but the colour is completely wrong (everything is shades of green).
    I can't think of anything that might be the problem, though I did upgrade from 10.3 to 10.4 and I'm wondering is this might be the problem??
    Thanks.

    The video out doesn't work properly any more on my G4 12inch powerbook. It had been working fine, but now it doesn't work properly with either of the mini-vga adapters that came with my powerbook. When using the mini-vga to composite/s-video, the image appears on the tv but there is no colour and the picture isn't stable at any resolution over 800 x 600.
    When connecting to a monitor or projector using the mini-vga to VGA adapter, the image appears on the screen etc but the colour is completely wrong (everything is shades of green).
    I can't think of anything that might be the problem, though I did upgrade from 10.3 to 10.4 and I'm wondering is this might be the problem??
    Thanks.

  • Stereo video recording is not working after updating to ICS

    hii am Dilu from India. I updated my xperia mini (ST15i) to ICS. After that stereo video recording is not working. Last week i found a new ICS update and i upadated to build .587 , now also the same problem exsists. Somebody please help
    Solved!
    Go to Solution.

    As I understand the the audio during video recording will be recorded in mono running on ICS.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Photo Booth will not open.  My camera works well with other apps.

    Photo Booth will not open.  My camera works well with other apps. 

    try running it in either 32 or 64bit mode and see if this changes the experience. Locate the icon in Finder, right click "get-info" on it and see the checkmarks "run in 32bit mode" ..
    on Lion some users had trouble opeining pb when "iglasses" was installed, also a thing to check.
    Else repair permissions of the disk, using Apples disk utility app.

  • Recording doesn't work since RAM Upgrade on WinXP x64 with Audi

    Hello there,
    I've been using my SB Audigy 4 (the usual version, not the pro version) for months in conjunction with WindowsXP Professional x64 SP2 by just using the drivers that can be downloaded from the web, "SBAX_WBUP2_LB_2_09_006.exe". Back then I didn't use the original CD because I thought it wouldn't support x64, which actually is incorrect . Everything worked fine. I then upgraded my memory from 4 GB to 8 GB. I am not sure whether the RAM update caused it or whether I did any other minor thing (this could involve BIOS updates or other software issues), but now I have the following issues:
    ) Recording doesn't work anymore at all: Things like VoiP (Skype, etc) or other recording doesn't work anymore, the indicator stays at 0 all the time. No matter whether the input source is the (WORKING) microphone, or the "what you hear" while playing music at maximum level. It simply refuses to record. Btw, I do have another partition that has Windows XP Pro 32bit installed, I can record with that one without problems. Using the same drivers that I mentioned above.
    2) Rear speakers aren't working. What should come out of the rear speakers comes out of the front speakers instead.
    I tried the following things to solve the problem, without success:
    ) Usual re-installation of the drivers
    2) Following the guide "Uninstalling Sound Blaster Drivers and Applications" that involves the "Clean start" of Windows and removing WDM drivers using the Creative-Utility. I did install the original CD drivers afterwards instead of using the newer drivers from the web.
    About recording there's another thing I can say: when I set the input source to the microphone and the I disable that the microphone output is muted, I can hear myself speaking.
    Any ideas what I could do?Message Edited by NameZero92 on 2-30-200706:8 PM

    wow, Thank you.
    I could indeed get the sound working when burning the 4 GB of RAM that I had additionally installed, which is hilarious, of course. :-)
    Does the driver-dev team look into this forum from time to time ? I would like to contact the support, but I purchased the audigy longer than a year ago. And actually I am not the who one who doesn't know what to do, but I just found a bug in the drivers (well, the guys in the other thread did, but what it comes down to is that with capacities of > 4GB deactivate the possiblity to record anything at all).Message Edited by NameZero92 on 0-03-200804:20 PM

  • The Videos application doesn't work in my ipod touch

    The Videos application doesn't work and movies cannot be played on both my 3rd and 4th generation ipod touches

    Make an appointment at the Genius Bar of an Apple store or contact AppleCare and get a replacement set of headphones under your warranty.

  • Quicktime screen recording doesn't work anymore!

    Hi,
    I'm running 10.8.4 on my MacBook Pro.
    Quicktime screen, audio, and movie recording doesn't work anymore.
    I repaired my Permissions, and it didn't fix the bug.
    What is wrong?
    Thanks,
    Chris.

    I am having this problem too. I've never used QuickTime 10.2 (build 603) to do this, but when I try today, it doesn't work.
    I launch QT, then choose "Record Screen" from the FILE menu. The black "record" window appears, but it is not clickable, nor does it do anything.
    I can quit QT via the cmd-tab shortcut, but otherwise it is not selectable. odd.
    To the devs: can this bug be fixed and a new QT installer generated... I am guessing that many of us would prefer not having to wait for an entire OS upgrade to have this fixed -- thanks!
    (note: I have no special soundcard or any other mods to this MacBook Pro 13" running OSX10.8.5)

  • I can sent photos from IPhoto with email.  But if I try to sent the photos from the IPhoto application, it doesn't work. I receive the message : "Le serveur de messagerie n'a pas reconnu l'association de vos nom d'utilisateur et mot de passe".  Help ?

    I can sent photos from IPhoto with email.  But if I try to sent the photos from the IPhoto application, it doesn't work. I receive the message : "Le serveur de messagerie n’a pas reconnu l’association de vos nom d’utilisateur et mot de passe".  Help ?

    iPhoto Menu -> Preferences -> Accounts ->
    Delete and recreate your email settings.
    Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.

  • Photo Booth Audio and Video not in sync!

    I am a YouTube musician. When I go to record I find it easiest to use the video feature in Photo Booth. However, ever since I upgraded to Mountain Lion my audio and video in my videos has been off of one another. They start off together but by the end of the video the audio is ahead of the video. When I went to try and see where it messes up I found that the video jumps frames creating almost a transition effect. I don't know how to fix this and would really like your help!

    Check out the "More Like This" threads over in the right column------------>
    Also check out KB Article http://support.apple.com/kb/HT2090 How to Troubleshoot iSight and EZJim's Website for possible solution to your problem.

  • Photo Booth Audio and Video are out of sync?

    Hi. So there is this glitch that when I take videos on Photo Booth the audio and video are out of sync. This started after I upgraded to Mountain Lion, and since I use Photo Booth a lot, I really do care. Is there anyway that I can fix this until Apple fixes this bug? Thanks.
    Extra Info: The first video I took was not out of sync, but after that they got more and more out of sync.

    I've read all the forums. It's a big problem for most Photobooth users, Apple acknowledges it, but does not yet have a fix.
    The best solution I have come up with is to dump Photobooth (I know - it was a great program, wasn't it? But so was Hypercard) and use Quicktime to make videos. You'll have to spend a little more work savings or exporting, but at least Quicktime is free.
    Just open Quicktime Player and under the File menu you'll see "Record New Movie."
    The downward slide continues...

Maybe you are looking for

  • Help! My pan doesn't work..

    I have a PreSonus inteface and Logic pro 9 . Everything works great except when I pan tracks I hear no panning going on. The display appears to be panning the track but it is not happening audibly, not on my headphones either. This is probably someth

  • Enterprise Manager Console on AIX 5L

    I installed 10g on an RS6000, istall went great and I was able to access the database via the web console. 2 days after the install I can no longer access the web console. When I attempt to access it, the browser times out after a while saying the pa

  • Aso cube build is taking very long time than expected.

    Hi all, We have 3 essbase servers (100v, 100x and 100y). No issue with 100y server. - 100v and 100x are mirror servers (i.e. same cubes will be built and load onto 100x after 100v is done) - Initially ASO build of a cube on 100v used to take 40 mins

  • Bindows in EPM 11.1.2.2

    I just installed EPM 11.1.2.2 on Win 2008R2 64bit.  Install and configuration went smoothly.  When I try to launch either Workspace or Shared Services, all I get is a window labeled Bindows and it says "Bindows belongs to MB Technologies..."  I know

  • Qualified Tables Working

    Hi All, How to Map the qualified fields in the qualified tables if the qualifier for that field is set to YES, because such fields are not reflected in the<b> import manager </b> for mapping only the fields whose qualifier is set to NO are visible.Th