Photo Booth Video- No Audio!

Yes, the mic works in other apps.

Yes, Setting the correct Mic in Sys. Preferences - Sound, worked. And after repairing Permissions that also helped. Before repairing Permissions, the Video would Record with Audio but it would stop recording prematurely without giving me an error message or letting me know it stopped recording. After Repairing Permissions, it seemed to fix that problem. I always use Onyx to repair permissions, because with Disk Utility, the same Errors seem to come back. Disk Utility seems to never work in repairing permissions for me. I don't know why !

Similar Messages

  • Audio not working in Photo Booth, video works fine

    When I record video in Photo Booth the video works fine, the audio does not work. I have looked through other forums and tried what they have suggested but nothing is working. I sware it worked once but now I can't figure it out.

    Lance Mcvickar wrote:
    I have listed it with google and you would think with the .com we would come in first in a search but we are slowly going further and further back in the listings and never made it to the top. Any insight as to why that might be.
    Lance ~ It could be because iWeb websites are not made to be search engine friendly. See this article:
    _SEO For iWeb: How to get your iWeb Websites into Google & Other Major Search Engines_
    By the way, a tip... Instead of posting your site's URL like this:
    www.thehorseyourodeinon.com
    ...include the prefix like this:
    http://www.thehorseyourodeinon.com
    ...then it will be easily clickable in your post. And before posting, you can switch from Compose mode to Preview mode to verify that the hyperlink actually goes to your site when clicked.

  • Squeal noise with photo booth video recording.

    I use my iSight and Photo booth to record video for YouTube. Every time I get finished recording and go to play the video back, there is a hum/squeal/high pitched noise along with the audio.
    Anyone know what's up??

    Hello Tony.
    Does recording with iMovie and plenty of light give you the same noises you hear when you record using Photo Booth? If so, this thread may give you some help: http://discussions.apple.com/thread.jspa?threadID=1944573
    The original poster of this thread says that recording video in bright light eliminates his noise. Apple are aware of that issue, and your problem may be another symptom of the same problem. However, this explanation does not fix your problem. It only lets you know that you are not alone. Here follow some suggestions that may help you correct your problem if the problem is common to both your iMovie and your Photo Booth.
    If you recently bought your MacBook, take it back to your retailer and see if he can correct the problem or give you a replacement MacBook that does not have the same problem. As pointed out in the thread I linked above, user obsidianspider was able to trade his new, noisy, MacBook for one with an acceptably low noise level by immediately bringing his specific problem to the attention of the manager of his Apple retailer. For specifics, see http://discussions.apple.com/message.jspa?messageID=5761948#5761948
    If you cannot fix your Photo Booth problem, and if iMovie does not share the same problem, using iMovie would seem to be the simplest solution. However, if you specifically want video effects in the videos you make for YouTube and you cannot get Photo Booth fixed, try a demo of http://www.tweakersoft.com/webcamtweaker.html to see whether it will work for you.
    EZ Jim
    G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11)   iBookSE 366MHz (10.3.9)  External iSight

  • Photo booth video recording not working

    I was recording a video with photo booth and while it was recording it was showing that the record button was on and that it was recording. But when i went to view it had only recorded 30 seconds of it. I didnt change the screen or touch the computer. Someone help please.
    oh and right before it had been working fine...

    HI,
    Try deleting this file.
    com.apple.PhotoBooth.plist
    ~/Library/Preferences.
    Move that fileo to the Trash and restart your Mac.
    If you need help navigating and locating .plist files, go here.
    http://web.me.com/carolynssamit/CarolynsMac_Blog/Path_for_.plistfiles.html
    Carolyn

  • No ichat or photo booth video visible.

    So I have been avidly using ichat and photo booth since friday. and today when i tried, (photo booth first) nothing showed up for my video. The built in light was on, saying the camera was connected, but all was black on photo booth. All effects showed no example of what they would look like. The attached link is a screen shot of my photo booth effects. The same issue is present with ichat as well.
    http://i6.photobucket.com/albums/y235/odonlife/Snapshot2007-10-3003-16-47.jpg
    alex.

    Hi ALex,
    Go to the System Profiler.
    Open the reveal triangles to Hardware > USB and see if the camera is recognised ?
    8:56 PM Friday; November 2, 2007

  • Adding photos over video? Audio sync issues. :o(

    I just started using iMovie HD today. So far so good- but I have run into an issue where I want to add photos over my interview subject (video and audio). I have separated the audio from the video so I can split the movie clip and add the photo... but iMovie isn't removing the extra movie footage so when the photo fades the movie audio doesn't sync with the persons lips. This must be a common issue. How do I fix this so when the photo fades the video underneath is synced with the audio (spoken word). Thanks for any help!!!
    PB G4   Mac OS X (10.4.8)   I'm a imovie noob. :o)

    Hi mistahtea - it sounds as though you are going about it in the wrong way.
    Firstly make sure that in iMovie Preferences you have ticked 'Extract Audio when Pasting Over at Playhead'.
    Then:
    1. Copy the pic you want to superimpose.
    2. Position the Playhead where you want the pic to insert.
    3. Go Advanced>Paste Over at Playhead.
    That should do the trick!

  • HT1277 How do i send a Photo Booth video in an email? It is telling me that I cannot use my gmail account to send it.

    I tried to send a video i had made on Photo Booth in an email using the Mail application, but a window came up telling me that i could not use gmail to send it. How can i send it without using my gmail email address?

    You're gonna have to find a different method. All ISP's limit email attachments, varies from 10MB's to 25MB's...far too small to email a 6 minute video. You can upload to YouTube, use Dropbox, copy to a thumdrive etc. But you won't be able to email.

  • Photo Booth video not in sync with audio

    I searched this problem and saw something about downloading a Combo. I tried that (and the step by step restart, etc that was offered in that discussion) but it will not download on my macbook pro. https://discussions.apple.com/thread/4175034?start=15&tstart=0 It says is cannot be installed on the disk because the volume does not meet the requirements.  I am using OSX 10.8.2. I would appreciate any help. I'm pretty new to the lingo, so the explicit the directions are the better. Thanks in advance for your time.

    *Kenny B* - What did you mean by?:
    Kenny B wrote:
    i think i fixed this by deleting the header title....
    1. Did your Project start with a "Title"? What kind of Title? A simple "Title" or "Title over Video"?
    2. What other video formats did you use to create your project? (e.g.: AVCHD, MPEG2, MPEG4...)
    3. What was the Project's Export setting? (e.g: Medium, Large or Custom QuickTime...)

  • How do I import photo booth video to FCP7?

    I recorded 6 or so 5 minute videos and i want to edit them in FCP7, i also have an audio track mixed down to mp3 from logic pro so the goal here is to match up the video with the audio(the videos have the same audio playing in the background of the video) but I'm having trouble with the following
    A. What video codec do i use to edit and what settings in the converter? do i convert it with mpeg streamclip or compressor?
    B. can i just drag my mp3 and its audio or should i use aif ect...?
    c. what settings should i set the sequencer to as well, frame rate/ratio ect

    Photobooth produces H.264 video at about 18fps.
    Neither of those specifications are suitable for FCP, which works with industry standard broadcast formats.
    Convert in Compressor to ProRes LT. You will also need to change the frame rate without slowing the footage down.
    You can't use .mp3 audio either - FCP expects AIFF at 48 kHz, 16 Bit.
    Sequence Settings should always match the source material - except yours is unsuitable to begin with.
    Look in the Easy Setup menu, that's what FCP works with.

  • Photo booth video effects not recording after upgrade to Lion

    I recently upgraded from s.leopard to Lion. Photobooth is working perfectly with the leopard until upgraded to lion, the video effects could not be used and recorded. It only appears in 1 sec when video recording.
    I have done the following already according to the forums I read.
    1. the 32 bit mode is not ticked.
    2. disk utility permissions.
    and still not working. Any advise? Thanks

    The same Lion-problem here. Everything looks just fine until I press record. Then the effect dissappears. I bought my 28" "BigMac" in february this year, and as the problem is mentioned about a year ago, it might be a major problem since no solution is mentioned anywhere.
    So, if you guys see or hear (or smell) anything in the direction of a solution, drop a note.

  • Photo Booth Video in Tiger?

    Is this possible? If not can I take video through iMovie running Tiger?
    Thanks!

    No - There may be 3rd party software out there for Tiger. Check VersionTracker and/or MacUpdate.
    Yes
    You can also make a video using QuickTime Pro!

  • Photo Booth Video

    How come I can't do any "effects" to my short video clip I downloaded to FCE. I can do anything to another one, but not the one I want to use. Even if I add a slug over it, I still see through it. I can't crop it, enlarge it, add a transition--nothin'. It's driving me crazy! I'm sure I must be overlooking something very simple. Can anyone point me in the right direction.
    Thanks so much!

    Even if I add a slug over it,
    The top layer is the only one you would see if it's 100%. You shouldn't need the SLUG.
    If you place the Playhead over the clip in the Timeline, double click that clip, it will open in the Viewer. Both Viewer and Canvas should now display the same clip.
    When effects are added to the clip in the Viewer you should see the change reflected in the canvas pretty much straight away.
    At this stage click the Viewer>Filter Tab, any filters should be seen.
    If none are there go to Browser>Video Filters>Blur>Radial Blur and drag that filter onto the Viewer, filter controls should appear and the Canvas will change. Alter the Steps value to a higher number and you should see more change.
    If the above process does not work, you may have to trash the FCE preferences then reboot your Mac.
    Al

  • Photo Booth Video Recording

    I am a teacher who used PhotoBooth to create portfolios with my students.  In SL, we were able to use a picture of the student's paper as a background effect while the student spoke about it while PhotoBooth recorded.  Now with the upgrade to Lion, the effect background is there before recording, but disapears when PhotoBooth starts to record.  Is there a glitch???  Am I doing something wrong or can this be fixed soon!  I'd hate to have boaring videos for the portfolios.

    Mountain Lion upgrade fixed the problem.

  • Photobooth keeps crashing whenever I try to watch a photo booth video???

    So I recently moved EVERYTHING from my old Mac desktop to my new one. When I record a video and then click to watch it, the recording screen will go black and the little color wheel will show up and long story short, I havent been able to watch any videos for a few days (for the first couple hours after the stuff on my old imac -> new imac, I could watch videos perfectly fine. Maybe its because I am currently updating iPhoto and its taking a veryyyy long time.)
    But...with my old iMac, I had about 10 slides of extra photobooth effects. It slowed down photobooth TREMENDOUSLY but I didnt know how to uninstall them.
    Unfortunately, those same effects have moved over to my new mac and its driving me nuts. I thought that was the culprit and tried uninstalling them. I cant do Library>Compositions>erase because when I do so, theres nothing there to delete!
    What should I do? Also I erased 3ixv and it did nothing for me.
    Does anyone have a solution???
    Info:
    Mac OSX 10.7.4
    Leopard

    EDIT: My computer is LION, not LEOPARD.

  • How to compress Photo Booth videos for emailing

    Kindly advise. Thanks!

    Hi, Eric - thanks for your reply. My test .mov file is 2.6 mg. The Zip file resulting from your recommended procedure is 2.4 mg. I need a much sharper reduction. Any further suggestions?

Maybe you are looking for

  • I cant view my site in safari... hmmmmm

    i forwarded my own domain to mask the url for my mac.web.com.yadda yadda yadda. i forwarded the frame to web.mac.com/myusername it took hours and it is finally working though my domain co said they didnt think it would. anyways.. it loads great on fi

  • My HP 2509b is fine for 5 sec when powered on but then goes blank

    Every time i power up my computer my monitor comes on briefly the goes away. If i power cycle the monitor it will again come alive but only for a few sec. I recently hooked up security cameras with HDMI connection but it seemed to work fine until tod

  • DNG Converter: I can't find any Convert Key

    Hi, I have a PC lap top XP home edition. INTEL CORE dUO 1.73 HGz I cannot understand why the application doesn't show the bottom line, the one where are located the INFO, EXTRAXT, CONVERT and ESC keys I downloaded several times the application, witho

  • Price captur issue from MIRO to J1IEX

    Hi,       As in case of import PO first we are doing MIRO and then remaning all process, after MIRO we are doing J1IEX part 1,  as while doing MIRO as per custom invoice we are entring all dat alike basic price and all taxes  but as custom are consid

  • Moving Mac mail between computers

    Hi! As I am considering switching from Entourage to Mac OSX Mail, I'm pondering this question: is it easy to move the e-mail archive from one machine to the other? In Entourage it all sits in Microsoft User Data/Office 2008 Identities. Where does it