Photo Browser does not show up

I am in iMovie and started a new movie.  I set a theme and entered all the information.  I was trying to insert a photo in the story board.  The Photo Browser is grayed out.  So Is there any thing I can do to place a photo in the story board?  I used the Movie Trailer for Travel.

Have you set the Preferences to Share Previews with iLife and generated Previews?
Regards
TD

Similar Messages

  • Photo browser does not show all aperture projects (missing 12)

    Has anyone experienced this issue? My photobrowser (mail) only gives me a partial list of what I have in aperture. Discussed this with apple support a month ago and he couldn't figure it out so suggested that I rebuild, which I did, and the problem went away, but now it's back. Any ideas, anyone? Thanks a bunch.

    Hi Tony,
    Many thanks for your comments.
    Yes, I did try all possible ways of connecting my drive to the iMac and even to my laptop (Firewire & USB).
    I also did the consistency check.
    I am not sure about the set-up of "Ignore ownership on this volume"? Never heard about this and will try to find out how to check that.
    The most extraordinary thing is that ALL my photos are visible in the "All Photos" blue folder, though they do not have the respective Project folder in the library window...?
    Since each project are existing in my Aperture file library when I open the "Show Package Contents", I am lost at what to do next to recuperate those projects in their previous state in my Aperture profile.
    My next move, I think is to try again to restore the vault onto another drive since you mention that size should not be an issue.
    By the way, can you tell me if a properly restored vault should recreate all project folders and its subsequent albums + smart albums in the Projects window?
    Many thanks for your support.
    Cheers
    Frederic

  • When I "enhance" a photo, it does not show up in slideshow, it is just black

    When I "enhance" a photo, it does not show up in slideshow, it is just black.  I am using Iphoto.  I also can't email these "enhanced" photos.

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Trying to sync photos from iTunes (via iPhoto) to ipad and iPhone. The  Photo tab does not show up and no sync occurs

    Trying to sync photos from iphoto to ipad and iphone.  Photo tab does not show up in itunes under devices. 

    I had a similar problem (https://discussions.apple.com/message/24525903#24525903)
    The solution in my case was to start iPhoto and let it update the library, even thu itunes was set up to sync with Aperture.

  • My photo album does not show the pictures I have taken! Any help?

    My photo album does not show the pictures I have taken, they show up on my iMac through iCloud but not on my phone. Also my videos do not show up that I take.

    Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.

  • Media browser does not show photos

    The media browser in iDvd & iWeb does not show the photos in my iPhoto library. It does show the tunes in my iTune library but not the photos in my iPhoto library. When I click photos in the browser, the browser says, "Open iPhoto2 or later or Aperature1.5 or later from your iPhoto or Aperature library in this list."
    I have iPhoto6.0.6. When I made a DVD two months ago everything worked okay. I suspect that I am missing something very obvious, but to date it escapes me. Does anyone have some experience with this problem? Please help.

    One thing that you can try is the often used maintenance of deleting preferences and doing a permissions repair. To delete preferences, close iMovie and iPhoto and trash the files named com.apple.iMovie.plist and com.apple.iPhoto.plist found in User (the house icon)/Library/Preferences. Then restart your computer and do a permissions repair using the Disk Utility app found in HD/Applications/Utilities. In the left hand pane of the Disk Utility window select your hard drive icon and then click on repair permissions. Takes about 3 minutes to repair. Then relaunch iMovie and iPhoto and see if you still have the problem. Those applications will recreate the .plist files that you deleted.
    However, this might be an iPhoto issue, and I would suggest that you post your question in the iPhoto forum as well.
    Have you updated iPhoto recently? Have you made any manual changes to your iPhoto library? Do you use keywords? Is your iPhoto library stored on an external drive where possibly iMovie can't locate it?
    It could be that you just need to rebuild your iPhoto library. You can do that by holding down the Option and Apple keys while launching iPhoto. Then chose the first 3 selections in the drop down menu. But be sure first to back up your iPhoto library to guard against power outages or other probs during the rebuild process. As I say, check with the iPhoto forum if deleting preferences and repairing permissions does not work.
    See if anything in this thread helps:
    http://discussions.apple.com/thread.jspa?messageID=8450454&#8450454
    Message was edited by: Rich839

  • Muse 7.0 plus Chrome: browser does not show images full browser width

    Hi there,
    I have a serious problem with the latest Muse version: the images which I use as parallax-masks for the background won't work with Chrome, though Safari and Firefox are not showing any problems. The issue: Chrome does either not scale the images to 100% browser-width or does not show them at all, or even shows the images cut into narrow stripes. This problem did not show in the previous version of Muse.
    Of course I already restarted application and computer. System: Mac OSX Mavericks.
    What to do now? The presentation with the client is very soon and this bug makes me very nervous.
    Best,
    bartl

    The problem bartl encountered and reported was fixed by the 7.1 release (November 21st). The problem you're describing sounds different.
    As of yet, I'm unable to reproduce what you're describing. The URL you've provided views the same in all the browsers I've tried, Chrome (32.0.1700.77) and non-Chrome, Mac and Windows.
    That said, looking at your master page I don't think you've created what you intended. At present there are two full screen slideshows on your A-master. On contains no images and the other contains a single image. Both are set to have thumbnails and the thumbnails container is off the right side of the page.
    If you look at your "Master Slideshow" layer in the Layers panel, you'll see the two slideshows. I think you'll want to delete one of them and, given your design, turn off thumbnails for the remaining one.
    Also, if you don't plan to have multiple images in the full screen slideshow, you'd be better off using a background fill image rather than the slideshow widget.
    I remain a bit puzzled how/why you're seeing different behavior in your instance of Chrome. Have you cleared your browser cache?
    On an unrelated note, if you set the page fill and stroke to none and set the browser fill to the most common color from the garage door image, it will avoid the momentary appearance of a white page on a grey background when your home page first loads. Instead the site visitor would see a blank page that's the most common color from the slideshow image, until that image loads.

  • Signing up for iCloud wiped out my contacts and my photos and does not show my documents,  what happened?

    Signing up for icloud wiped out my contacts, photos, and my apps.  It also does not show my pages docs for my imac.  What happened?

    You can install the portable Firefox 3.6.19 version.
    * http://portableapps.com/apps/internet/firefox_portable#legacy
    * http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • Media browser does not show previews of raw photos

    Hello,
    I use Aperture 3.4.3 and I have the following problem. If I import photos in jpg format they are immediately available in the media browser and can therefore be selected as a desktop photo via the Desktop & Screen Saver preference pane. If I import photo's in raw format, they do not appear in the media browser until I have forced Aperture to rebuild the previews. If I edit the photos without forcing Aperture to rebuild the previews they are not available in the media browser.
    Any suggestions are welcome

    1. Aperture does not generate any previews when importing jpg's, raw photo's or merging libraries even though I have selected New projects automatically generate previews and always share previews with iLife and iWork (I am importing photos into an existing project but I would expect photo previews to be updated automatically in these cases as well). My statement above that Aperture shared jpg's automatically is therefore incorrect.
    This looks like your preference settings cannot be stored by Aperture. You write, that you already tried to remove the preferences. You did look in the  "Preferences" folder in your hidden User Library in your Home folder  ~/Library/Preferences/com.apple.Aperture.plist and not in the System Library on your MacintoshHD  /Library/Preferences/com.apple.Aperture.plist, right?
    Also, when removing preferences in Lion an Mt. Lion, it is best to log off and on again after quitting Aperture. Otherwise the removal may not take, because you cannot rely on a "Quit" to remove the process from the caches. Aperture simply may launch again restored from the cache, without noticing that the preferences have ben removed.
    3. If I edit the photo in Aperture after I have generated a preview (say crop it), the preview does not get updated.
    That is consistent with the above.
    4.You can only resolve this by forcing Aperture to generate a new preview, shutting down Aperture and then launching the preference pane.
    Ths may also be related to broken Aperture preferences. The Media browser needs the preferences file to find the current Aperture library.
    I like to suggest two basic tests:
    Generation of previews may also fail, if your Aperture library is corrupted. Then You should have no problems with the generation of previews, when you import into a new library. Create a small new testlibrary and import a few images. Are previews generated? I not, then the problem is not dependent on your current library. If yes, you need to trouble shoot your library. Post back.
    Do you have the same problem, when working from a different user account with a diffrent Aperture library? Then preferences are not a problem - you have a system wide problem and probably need to reinstall. Post back.
    Regards
    Léonie

  • CF card reader for photo impport does not show on LR3

    Firsst I'm a newbie to Apple and LR3 and using Scott Kelby's LR3 book to start. Incredible as it may be I'm stuck beyond Step 2 (the very beginning of the book) in trying to import photos, first form a DVD and also from a CF card reader. The error message on my DVD says that there is an initialization error (OK, OK , the DVD with photos was created on another laptop, running on Windows Vista, so it may be a Read Only file). Aside from that, however, my CF card with photos does not even show up on LR3.
    I have gone to System Preferences and changed the way I want CDs and DVDs to show. In both cases I changed it to "Open in LR3". Is that wrong?
    Here is a Screen shot of LR3 Library when  tryingn to import photos. No (CF card) drive is shown. (Hope it shows)
    file://localhost/Users/dennisluz/Desktop/Screen%20Shot%202012-03-19%20at%204.29.50%20PM.pn g
    I'm getting desperate as I have spent many hours trying to figure how LR3 works. I have created "My LR Photos" folder in LR and I was hoping to create additional subfolders under the above to store all my photos.

    No volunteers?
    OK, the saga of the non-loaded photos continues. Since my last post I have on one or two occasions been able to have photos from my CF card load and show on LR3. The last time it was successful, I had the iMac turned on first and then, after half a minute,  connected the CF card reader to the back of the computer and when LR3 was opened, the photos loaded. I have tried connecting the Card reader to the computer first before turning on the iMac but it did not work. Is there a procedure as to what should be turned on first?
    Here's another thing: the one time when my photos loaded I was able to go to the Develop module and do all kinds of things the software allowed me to do. There were some photos which I did not select in the Library module and so they stayed in the CF card. Now, when I took more photos in the same CF card (there was still a lot of memory left), no new photos were able to be loaded in LR3. Do I have to clear something first, like a path?
    I hope you folks who read this don't get annoyed by this on-again-off-again posting, but, as a newcomer to LR3, I find this confusing. Scott Kelby's book has been helpful in some way but it does not address many situations like mine. I wish I had spent some $$ on the other book by Victoria (?) to supplement kelby's book. Maybe I will.

  • ICloud photo stream does not show all photos

    I have 1000 photos is my photo stream, however on my Apple TV I just setup, I can only get 322 to show up in the iCloud Photo Stream. I've tried restoring and setting it up again, but I have the exact same numbers of photos.
    Is there a reason I can only see 322 out of 1000 photos in my photo stream on the Apple TV?

    I noticed the Apple TV was not displaying my photo stream after the update to 6.0. Here is what I did to get it to start displaying my photo stream again.
    On your Apple TV go to Settings>iCloud
    Click on iCloud Photo Settings
    Turn off both the My Photo Stream and Photo Sharing options then turn them back on again
    Select Photo Stream from the Settings menu and navigate to select the photo stream you want to use
    Preview the slide show
    I have about 400 images in the photo stream that I use to display on Apple TV and during the preview it took about two minutes before the images displayed.
    Then I tested it in a normal setting where I have slide show starting after two minutes. The TV went to screensaver mode after two minutes and was black for about two minutes before the images appeared. Before the update the images would display shortly after the screensaver kicked on.
    I hope this helps!

  • FireFox browser does not show toolbar when login to infoview

    Hi,
    I am using Business Objects Enterprise XI release 2 with SP 4. When i login to infoview using FireFox I can not see the toolbars and menus needed to create a New Webi report or any other reports.
    Has anyone know how to fix this? I tried the following patches , but it did not fix the issue.
    ADAPT01081436
    Description:
    In a Firefox browser, when creating a multiple-pane outline of a Web Intelligence report in "My InfoView", an error message
    appears.
    New Behavior:
    This problem is resolved.
    Also, I have found below issues from boxir2_en_ServicePack4_readme.pdf document:
    ADAPT00861711
    Description:
    You cannot launch a web in a Mozilla Firefox browser from a dashboard customized help URL.
    Page 52 of 130
    New Behavior:
    The exception handlers now catch errors thrown by Mozilla Firefox.
    The error message i see in the Error console is this
    toolbarContainer has no properties
    menuNew has no properties etc
    Regards
    ambili

    Firefox 2 version 2.0.0.20. and the JRE version that is installed on the machine is 1.6.0_30.
    I tried the same with FireFox version 3.0.5 and  get the same issue. I did not try to open any reports. But in the infoview first page, i can not see the tool bar from where you create a new report. 
    The error message i mentioned in the message is actually seen in the Error console from  Tools -> Error Console from the browser
    regards

  • Photos album does not show all the camera roll behind the label album

    tap on photos icon, albums will be shown i.e camera roll and photo laibrary. In my case the camera roll was hiding behind the label albums. What i mean is the page was not fully shown.

    http://support.apple.com/kb/TS3804

  • Photos tab does not show specific albums

    Under the Photos tab in iTunes, I canNOT choose the 'selectd albumns' radio button to sync only specific photo albums. FYI...I also have this same problem when trying to sync an AppleTV to iTunes.

    I found the cause but no solution, it's actually a plugin that does that: divx plus weblpayer (it gets installed when you install DivX on your system), if you disable it and restart firefox it all works again. But I want that plugin... so DivX need to fix this, unless it is a Firefox bug in its own core... anyway these two together creates the problem.
    (I'm running Firefox 9.x on OSX Lion)
    I also wish firefox tab tear out tab worked more like chrome's tab tear out, much friendlier...

  • ITunes says syncing song cover photos but does not show up on my iPhone

    Everytime I have synced my iPhone onto iTunes it says it is syncing cover photos. It is the same ones over and over again but they don't get put on. Is it iTunes or my iPhone?

    I'm a bit unsure from your post which playlist is missing from where. If you deleted the "Purchased" playlist in iTunes it will be recreated next time you make a purchase. You can add your previous purchases into this list, and select it to be synced to your device. The "Purchased on <Device>" playlists are locked down and cannot be edited.
    tt2

Maybe you are looking for