Photo Dimensions in iWeb - Am I correct?

Is my understanding correct?
Under Inspector/Photos/Download Size there are three options, small, medium and large. From a previous post I was informed that these relate to:
1) small = 800px x 600px
2) medium = 1280 x 960
3) large = 1920 x 1440
On my photos page, I am draggin and dropping my images. If I select "medium" and my image is 2400 pixels on the longest side, does this mean that iWeb will convert the image to 1280 pixel?
And, if Inspector/Page is set to 1,000 pixel width, the image will be further downsized to something less than 1,000 pixels when it appears on the screen.
Am I understanding this correctly? I am trying to maximize my photos for viewing on the new iPad.
Thanks

much better when you clarified your question.
My basic question is in regard to the ultimate displayed resolution... for viewing on the new iPad.
960px is fine for displaying in ipad.
however, images have more than one purpose; it can be for display and/or for print.
computer/ipad display can stay the same size, but for printing the higher resolution the larger or better the prints look. so it's up to you to decide.
you already saw my other post reagrding scaling web page when using ipad, by scaling with ipad safari... you can have smaller image for displaying (but bad for printing)

Similar Messages

How to get MobileMe photo galleries into iWeb or from Aperture?

I currenlty use MobileMe for an iWeb published site, on which I have a link to a several dozen photo galleries, all pub;ished from Aperture. iPhoto has an iWeb "button", but Aperture does not so far as I can see. I am trying to find the easiest way to keep all of my stuff intact once MM dies next year. How can I migrate, not link, my MM photo galleries into iWeb, and/or publish them from Aperture into iWeb? Once I have the photo galleries as part of iWeb, then I'll be able to use it to publish to another web hosting service. Thanks!

Do you have the original image files used to make up those MMe Galleries? If so you can group them into albums in iPhoto and use the iWeb Album page or Photos page and ignore the MMe galleries.
If the files are in Aperture and there's no Aperture section in iWeb's Media Browser you will have to export those files out of Aperture as originals and drag them either into iPhoto or into an iWeb photos page. I don't use Aperture so an unsure of what can be done between Aperture and iWeb.
If those galleries are the only copy of the photos you have you'll need to download the file (if the gallery allows it) and import into iPhoto before going into iWeb.
OT

Problem publishing Photo page with iWeb 08

Hello,
I have a problem when publishing photo pages with iWeb 08. Upload starts and then I get the error message that iWeb encountered a problem while publishing. The funny thing is that I can see
the photo page in Safari. The only problem is that when starting the slide show I can not see the
forward/backward buttons. Publishing a photo page with iWeb from a .me web photo gallery works without any error message, but still when starting the slideshow the navigation buttons are not displayed. Actually if you click on the place where the navigation buttons are supposed to be,
you can go picture forward/backward. Any idea ?

I am having the same issue, except I do not get any error messages when publishing to a folder. Clicking on the "index" file within the folder will open the photo page in both Safari and Firefox. Everything functions as designed except no forward/backward/pause buttons are visible below the slideshow. There are text box outlines with a question mark where these buttons are supposed to be located, and I can pause, advance or reverse slides. Eventually these question mark outlines disappear and stay disappeared.
The end result is there are no intuitive graphic indicators on the slide show to even suggest to the viewer that he/she has some control over the presentation. I don't believe I can add explanatory text boxes to the slide show to compensate for the missing icons. This lack of visible control elements in the slide show is a huge issue. I am reasonable sure the problem does not reside within my computer. I've also reviewed inspector control options for a photo page/slide show and haven't gotten any combination of check boxes to make a difference.
I'm beginning to think this may be an unexpected conflict that was contained within a recent software update. It might well be worth a close look at programming code by Apple technicians. In the meantime, can anyone offer a clue as to what might be going on?

Photos in iPhoto / iWeb

If I've used a photo in iWeb from iPhoto and then delete the photo from iPhoto, does the photo remain in iWeb or does it become a blank space?

iWeb will "remember" it. The info is stored in the domain.sites2 file.

Multiple photo albums in iWeb?

How can I create multiple photo albums in iWeb? When I simply pull albums from iPhoto to iWeb, the photos appear individually.

Updated to Firefox 3.6. My Photo Albums display properly on an iWeb site in Safari; they also previously did with the Firefox version I had updated from. However, the photo albums have disappeared now from my Photo Album page.
http://www.singingstring.org/JM/PhotoAlbums/PhotoAlbums.html
Apparently many people are having this problem but it isn't resolved for anyone. Is it Apple's problem or is it Firefoxe's -- and is this happening in IE too (we don't have IE here on our computers btw)
Since these are professionally-related photo albums it sure would be nice if this could be fixed pronto.

Photo resolution on iweb

Does anyone know how to improve the photo resolution on iweb? Can i upload pics from iphoto to iweb with original file size?

Does anyone know how to improve the photo resolution
on iweb? Can i upload pics from iphoto to iweb with
original file size?
Yes, you can. Not sure why you would want to do this. Web images tend to have to balance image quality with download speed. But sure, you can have your original photo used in iWeb. Just drag it from iPhoto directly into iWeb. Then open up the Inspector and click on the Rulers tab. The click "Use original size". That will be your original photo.
If you make any other changes to your photo like shrinking it down to a little square or rotating it or putting a frame around it, then iWeb will convert your photo to a PNG file and subsequently recompress the image for the PNG file. That will again lower your resolution.

I tried to implement photo albums using iweb and got a publishing error.

I tried to implement photo albums using iweb and got a publishing error. All was fine with my site until I added the photo album page. The software doesnt say what the error is exactly, only that it is a publishing error to my ftp
Exact message "There was an error communicating with the FTP server. Try again later, or check with your service provider."
If I reduce the albums inside to 1 then it seems to work but that takes away from the usefullness of multiple albums.
my iWeb version is 3.0.4 (601)

Publish your site to a folder on your hard drive to see if the publication will proceed successfully and open the site locally with your browser to confirm all of the alums are there and work. If they do try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If you're still not able to publish from iWeb to your server download and use the free Cyberduck to upload your website files to the server. Users have found that CD has been successful when iWeb had problems.
OT

IWeb-How can viewers export/capture photos from my iweb sites?

I am working with iweb 08 and created a website for fellow classmates to view old grade and High school pictures with names and want them to be able to export or capture copies of any photograph from my iWeb site for their own use. I want them to have a good quality photo that can be in a size from 5 x 7 to 8 x 10 inches like the originals.
How can they get copies of photos off my iWeb site??

Hello Newbe here
Have been playing with iWeb and I believe that it can do what I want it to - however, I have been struggling yo get it to play ball.
I have a load of large images in my idisk-Public folder, however this is a bit cumbersome to navigate and does not offer the user a preview of the image. What I was hoping to do was to create a small website in iWeb and then place some thumbnails on the pages (with some text etc) and then links to the actual files on the iDisk/Public folder. For information there is about 2GB of files (many of which are 300dpi large PSD files at between 25-50MB each). As such, it would be impossible to embed them in the website and, I don't really want to have to upload all 2BG back to iDisk again in order to get links in the iWeb directory to work.
I was hoping that I could use the hyperlink to a file - but this does not seem to work and it just seems to embed the file into the website. If I go to iDisk/Public and try and point the hyperlink at a specific file - then it seems that everything in the public folder has the same web address (I have a number of sub-folders in the Public directory).
So just for total clarity - what I am trying to do is generate a website in iWeb, place a small JPG or PNG file (thumbnail) and then provide a number of links to a source file either as part of the thumbnail image or with some text next to the image (where the file is available in a number of formats - e.g. PSD, EPS, TIF, etc).
I hope that this makes sense and that someone out there knows how to solve this issue and is kind enough to point me in the right direction - before I pull all of my hair out.
Thanks in anticipation.......
Andy

Is ilife any good at publishing simple photo galleries like iWeb/ mobile me used to be?

is ilife any good at publishing simple photo galleries like iWeb/ mobile me used to be?

As Roddy pointed out iWeb will still create album and/or photo pages that will work on the hosting server of your choice. These two pages are demos of that: Using an iWeb Album Page as an Alternative to MobileMe Galleries and Using an iWeb Photo Page as an Alternate to a MobileMe Gallery
This may also be of help to you: Life After MobileMe.
OT

TS2167 I put some audio and photos on my iWeb but it won't publishing thru. What can I do?

I put some audio and photos on my iWeb but it won't publishing thru. What can I do?

What is the URL of your web site?

Want to define the photo dimension for photo upload

Hi,
I want to define the photo dimensions for photo upload in attachments on external candidate profile page in e-recruitment module. However, i have checked in SPRO in attachment node but not able to explore this functionality.
Kindly help.

Unfortunately, you cannot check the dimensions of attached documents with this BAdI, but it can be used as a starting point for your further verification.
Please refer to topic Get image dimension width height to retreive the dimensions of a JPEG file

IWEB not publishing correctly on pcs...photos and location of things

Everything looks great on our macbook but when we look at our site on a pc the margins and photos are a mess. What can we do to make it consistent on what we see on our iweb and live from our mac? Thanks
RA

Are you using a web safe font?

How do I get my gallery photo pages in iweb to publish on my site ?

HI
I have recently upgraded to iweb 09 from iweb o6. I have also upgraded from tiger to snow leopard and now have a terabite size hard drive. Iweb was working great before , but now i cannot get my website to upload correctly using ftp fetch. fetch is not the problem as i tried another ftp and had the same problem. My pages that have gallery photos on them will not show. my website is www.naomigrant.com the pages not responding are paintings sold and paintings for sale page. I have uploaded correctly , published correctly and everything looks like it has worked. But when i go to my site the images are not on those two pages. Images are showing in other pages. when i test it in iweb and it says you can visit your site , everything looks good there and you can see the images. So i am totally at a loss as to what to do. I have spent 3 days trying to fix this so far. Can anyone please help me? Should I reinstall i web?

There is no point in re-installing iWeb, because after you have published it really is not an iWeb problem - if there is something not working on uploading the files, then it is really nothing to do with iWeb after html pages have been created.
If you are using Fetch to upload, then you have obviously published your site to a local folder? If so, are the photos there when you look at your local site? If they are there when you publish to a local site, then it is an error in uploading and if photos do not show, it means that some things are not being uploaded to your server correctly.
Have you tried using Cyberduck instead of Fetch? Cyberduck or Transmit are two of the better ftp programmes to try.

Can't get rid of stock photo when using iWeb but publishing to non-MobileMe

On one of my pages I have a vertical column of photos with my photos from iPhoto that I dragged and dropped into iWeb. The page was originally based on an iWeb template, though I cannot remember which one.
The problem I am having is that the stock photo sometimes shows up when I publish the website - even though I have dropped a photo in the space, saved it and re-published it. I have gone into the files and deleted the stock photo and I even went to my webhost and deleted the stupid thing there as well. Regardless, the #*!!%@ thing keeps showing up.
I have reloaded the page to my webhost multiple times. I had the same problem a day or two ago and eventually the stock photo stopped showing up, but I have no idea what kind of hocus pocus made it finally disappear and the correct photo show in its place.
Any ideas?
thanks,
roxpat

It is apparently an iWeb issue. In the template that I used, I guess some aspects are just "in there" and are not able to be removed.
I ultimately removed all of the photos from the page since they had originally started as "drops" into the placeholders and put my photos in manually (not a big deal, of course). I saved it and "published it" to the folder. . .and there was that stupid photo again. I yanked the photo and put it in the trash and went to my webhost and removed the same photo. . .and finally the stock photo went away.
Every time I update the site (or those pages, anyway), I have to go in and remove that #%^#^& photo.
The moral of the story is that I need to just rebuild the page from scratch - without a template. It shouldn't be too hard, but it's more effort than I want to exert at this point
roxpat

The removed photo albums in iWeb are not removed from my website.

I have removed a few photo albums from my web site in iWeb and added none. When uploading the changes to my website it still shows all the albums only the links of the removed albums are not valid any more.
How can I get the albums completely removed from my site via iWeb?

Welcome to the Apple Discussions. You are hosting your site on a MobileMe account, correct?
Try publishing the entire site with the File ➙ Publish Entire Site menu. If that doesn't clear out the old stuff from your web site try the following:
1 - close iWeb.
2 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
3 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
4 - reboot.
5 - launch iWeb and and try again.
Still if not cleared out publish the site to a folder on your hard drive and open the local copy with your browser to see if that shows the changes to the site.
Happy Holidays

Photo Dimensions in iWeb - Am I correct?

Similar Messages

Maybe you are looking for