Photo displays

I can find no good information on subject. For 18 months I have been working with Elements 7 and producing prints and books. My camera is a canon and my aspect ratio is of course 4 x 6 (2:3) and I produce 8 X 12's or 12 x 18 for wall hanging. I had hoped to find some way to display photos via TV (DVD) or other means in a simple fashion. Roxio's easy media creator does it wonderfully simple by just dropping in, but aspect ratio is for point and shoots with alternative of 16:9. I though :what about those photo displays one sees in everyone's house? No luck, seemingly, as they appear to use exclusively the same ratio. After all the work I put in on editing, I would rather nothing at all than arbitrary croppings. I am surprised that there seems to be nothing. Perhaps I am missing something. (PS: when I first got into digital photography and elements, I tries out the Elemets slide show, but that got me nothing but confusion--if premiere was the easy answer, I would buy it, but my recall was that it is not.)

Thanks. If I understand, then, and by implication, if I
were directing myself to a slideshow as the objective, I might crop and have controlled cropping by doing that at the outset. However, if I am editing on the basis of 8 X 12, and after all the working on it decide that this is one that shouldgo into slideshow, I am sort of out of luck, correct?
Except, of course for those software programs you cite. Putting aside the sad last warning, are they pretty simple to use? I will look into them, but anything more you can tell me would be great.

Similar Messages

Picasa Web albums: doesn't display all uploaded photos. This only happens on my desktop computer. All photos displayed on my laptop.

Not all of my uploaded photos display in my Picasa web album. All the photos upload, but 17 out of 90 photos don't display. Some are landscape, some are portrait. This is no pattern to what doesn't display (e.g., not every third photo). This only happens when I use my desktop computer. When I use my laptop, all uploaded Picasa web album photos display.

See:
* [[Images or animations do not show]]
* http://kb.mozillazine.org/Images_or_animations_do_not_load
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

ESS photo display problem in portal

Hi,
I am not able see the photo in communication data or while viewing the employee's profile in my system. The photo is properly getting stored in sap hr. In Internet explore security settings are low and even photo display is ticked but still i am not able see the photo in the iview of portal.
Please help.
thanks,
Regards,
Aditya

Hi Aditya,
1. R you able to see the photo while accessing PA30 ?
2. There is a function module to retieve the employee photo in URI.
    & you can use that URI in your Iview.
call function 'HRWPC_RFC_EP_READ_PHOTO_URI'
exporting
    pernr                  = '00001185'
*   DATUM                  = SY-DATUM
*   TCLAS                  = 'A'
importing
    uri                    = uri
and URI should be of the type TOAURI-URI.
Rgds,
Jothi.P

Is it possible to play a full playlist during photo display?

is it possible to play a full playlist during photo display?. I can play one file from a playlist during photo display, but it then repeats, rather than continuing through the full list. Anyone got suggestions?

The only options at this time are:
1) Find a 3rd party slide show app that will do this.
2) Put together a slide show with a presentation app that will support this.
3) Get an mp3 file editor and 'splice' several songs together into one long mp3 file.

Photos display from Notes with iPod Classic, but not Nano

I have created links to 5 small .jpg photos in a single Notes file in an iPod Classic, and each link and photo works and displays just fine. However, when I use the same file and photos on a Nano, (copied the exact same file structure and content from the iPod Classic) the links work, but the photo displays as a blank white screen with "Oya" displayed in the upper left hand corner.
Any idea what causes the "Oya" error message to be displayed?
Thanks

Try this:
Use the click wheel on the ipod
Go to the Menu >> scroll through the Settings >> on my iPod nano 3 gen I can change the settings for Shuffle & Repeat >> On or Off. Skip is not available.
May be on your iPod in the menu you could change the Skip >> On or Off.

Autorization for Photo Display in change on data of ESS

Hi All,
I need your help regarding Photo Display in Portal ESS applications like who's who and change on data.
For the same Authorization at ECC side required.If i use sap_all authorization, the pheto displayed at the portal side.
But only using ess authorization , the photo is not displayed. Could you please give me the solution for the same??
Thanks,
Anumit

done myself
I added the below object
S_WFAR_OBJ
S_RFC
PLOG

Photos displaying 16:9 through Apple TV HDMI ??? How do it ?

How can I display photos in 16:9 on a SONY Bravia through a HDMI connection from the 160GB Apple TV ?
I was surprised today when I used my iPod Photo on a widescreen TV for a slideshow, and even without HDMI connection, the photos displayed in all screen (16:9).
In my Sony Bravia the photos displayed through the Apple Tv (HDMI connection), use less screen.
Why is that ?
Message was edited by: Pedro Santos
Message was edited by: Pedro Santos

Pedro Santos wrote:
And how I solve it ? Or there is no way ?
nothing you can do about overscan really, unless your tv has the option to adjust the picture geometry (most don't).

All photos displayed in Lightroom are very dark

This has just started in the last few days. Now all my imports into Lightroom 1.4.1 appear very dark compared to shots on camera display or same photo displayed outside Lightroom. This applies to dng, raw, or jpeg. Old libraries now all appear dark. If you adjust in Lightroom to look right they appear washed out in every image viewer outside Lightroom. Import a jpeg that was previously exported from Lightroom and looked fine now looks very dark when imported back into Lightroom. I have reinstalled program and tried every setting I could think of and all photos still look very dark.

Hope this fixes it. Deleting the default profile will make windows (and therefore Lightroom) assume your display is exactly sRGB. This is a good first approximation, but to get correct color you need to actually calibrate. Note that after calibration, Lightroom and unmanaged apps will not exactly correspond to each other, but they should be close. Most importantly, the contrast should be the same as long as you calibrate to the standard gamma of 2.2. You should see tiny differences in color saturation and in shadow colors - this is normal.

Wrong photo displaying for sender of iMessage

Wrong photo displaying for sender of iMessage .Contact information says another contact is "ME," it says ME next to anther contact, but it is not me. They are not signed in in icloud. I am signed in. So I do not understand

As per my post above, I believe the fix to be:
"When I got to General, I worked my way down the list and imagine my surprise when I found Siri of all things had her name down against it and not mine. Lo and Behold, when I changed this to my name and returned to iMessage, my photo now displayed against my replies.
So, if you have someone else's photo showing on your iMessage replies I strongly recommend you look at Settings > General > Siri first!"
Hope this helps Roger.

SAP Campus Management photo display

Hi Experts,
can any one let me know how to work on photo display in abap reports or smartforms.
Actually we are working on campus management, were we require to print the I-Card of students... so for every corresponding roll number we need to display the photos for the students.... is there any function module which can be used for it..
tx in advance.
Sudhanshu
Edited by: Sudhanshu Sharma on Feb 13, 2008 5:21 AM

Hi,
Please check the code which created and display Image on Program.
OBJECTPICT a control should be defined on the Screen.
MODULE pbo_0200 OUTPUT.
DATA: objectpicture TYPE REF TO cl_gui_html_viewer,
objectpicture1 TYPE REF TO cl_gui_html_viewer,
my_container   TYPE REF TO cl_gui_custom_container,
my_container1 TYPE REF TO cl_gui_custom_container,
t_zispicture   TYPE TABLE OF zispicture,
r_zispicture   LIKE LINE OF t_zispicture,
prog_repid     LIKE sy-repid,
wa_picurl      TYPE zipicurl,
doc_url(255),
doc_url1(255).
CLEAR doc_url.
CALL METHOD g_bl_object->bl_select_picture
EXPORTING
g_db_object_old = g_db_object_old
g_db_object_new = g_db_object_new
r_zisobj        = yisobj
IMPORTING
r_zispicture    = r_zispicture.
IF r_zispicture IS INITIAL.
doc_url = 'http://www.googleimages/ImagesGlobal/nopicture.png'.
ELSE.
doc_url = r_zispicture-zipicurl.
ENDIF.
* registrieren des objects wenn nicht vorhanden.
IF NOT objectpicture IS INITIAL.
CALL METHOD objectpicture->free
EXCEPTIONS
cntl_error        = 1
cntl_system_error = 2
OTHERS            = 3.
CALL METHOD my_container->free
EXCEPTIONS
cntl_error        = 1
cntl_system_error = 2
OTHERS            = 3.
ENDIF.
prog_repid = sy-repid.
CREATE OBJECT my_container
EXPORTING
container_name = 'OBJECTPICTURE'.
CREATE OBJECT objectpicture
EXPORTING
parent = my_container.
IF sy-subrc = 0    AND
NOT doc_url IS INITIAL.
CALL METHOD objectpicture->show_url
EXPORTING
url = doc_url.
ENDIF.
PERFORM dynpro_attribute.
ENDMODULE.                 " pbo_0200 OUTPUT
Regards
Bala.M

IPhoto synced photos display in iOS sorted by date imported

This is precisly what's happening to me, and it definately changed with either the last iTunes update or the last iPhoto update. I can't be sure. I'd be willing to bet it's iTunes, since the photos display in iPhoto (date taken ascending) just fine.
I can confirm there's an issue with one of those programs, NOT with iOS 6 specifically. iTunes and iPhoto are up to date as of this post, having updated both within the last week or so as updates were available. All photos are grouped into Events within iPhoto.
1. I removed photo synching from all iOS devices, and deleted the iPod photo cache.
2. In iPhoto, I reset manual sorting, switched from date descending to date ascending (what I want). Everything in iPhoto displays correctly.
Those two steps have fixed sorting issues in the past.
3. Sync photos to iPhone with iOS 6.0.1
4. All photos are correctly ordered, with the exeption of the photos imported SINCE the last iPhoto (or iTunes) update. THESE, and only these photos are sorted by import date, NOT date taken, so they are appended to the very end of the event.
5. I repeated the process with an iPhone still on iOS 5.1.1 - same result.
So, this issue is sync related, not iOS related. Again, I can't be sure if it's an iPhoto or iTunes thing, but a recent update of one of those (or both?) has messed this up. Anyone else seeing this?

Sound like an iTunes or iPhone issue. Post your question in those forums.
OT

IO4 on 3GS and blurry Photos Displayed

Since I upgraded to i04on my 3GS my photos displayed are blurry. They don't go through the sharpening cycle when you first display any picture. And stay blurry. The thumbnails look ok, but don't sharpen up when I go to display therm. Any suggestions?

I don't have that problem with mine. Try turning your phone off and then restarting it to see if that helps.

Student Photo display

Hi,
I have uploaded the photo succesfully using business object PDOTYPE_ST AND document type PIQCOLFOTO .
But the image could not be displayed in the Student Master Data . Whereas its working fine for HR [ PA30 transaction ] .
Note :
When the photo is not displayed in pa30 tcode , i adjusted the infotype header definition and it worked well.
Is there any option there for SLCM to get the photo display.
Regards
Gajalakshmi
Edited by: Gajalakshmi Kannappan on Feb 7, 2008 3:06 PM

Hi Gajalakshmi,
We had faced the same problem earlier. We solved it using a workaround - of storing the photos in the database instead of the content server. You can try this as well:
Go to IMG --> SAP Netweaver --> Application server --> Basic services --> Archivelink --> Basic customizing --> Edit links
Check that the link between document type (PIQCOLFOTO) is there to SAP Business documents and the correct form of repository.
This will show you "Link Information for Optical Archive" twice. Click the 1st entry.
When the View Links for content repositories: Overview opens, scroll to object type PDOTYPE_ST . This will have a content repository id as "MA" (Or some other value. Make a note of this value).
Then in the same IMG path mentioned above, in Basic Customizing, choose "Define content repositories."
Locate the entry "MA" (or other value obtained above) and choose the Storage Type as "SAP System Database"; protocol as SAPMA; and a Contents table as ZRMCONT02 (Note: You will need to copy this table from a ZRMCONT* table that has a photo attribute. Just make a copy of this table and call it ZRMCONT02 or something.) Give this table name in the 'contents table' field.
Save and exit. Now when you upload the photo it should be visible in the Student file option.
This is a way (though not the best way) of achieving the objective since it stores the photos in the database. Therefore, for a large number of students, it may slow down performance. A better way is to use the SAP http content server for this purpose.
Hope this helps.
Best Wishes,
Ashish

I updated the photos that share with Apple TV but old photos display during music

I updated the photo file that shares with Apple TV, and they display correctly when I play the slide show, but when they play slideshow with music playing it's the old photo file. How do I get the new photos to display during music? Thanks

Not sure what you are trying to do, but the photo is just cached. You might try restarting ATV and see if that will foruce a cache relaod.
What is it you did? Did you update an image, cover art, photo stream? It could also be that what ever you updated it not what is being displayed. For instacne if you updated something in iPhoto, but are pointing to Photostream that will not have an effect. Same problme if you are looking at cover art while the music is playing.

How do I determine the order of photos displayed in slideshow?

I'm using my ipod to teach art, using a dlp projector. I've got pictures sorted by topic. But I need to know how to organize the photos to display in the order I want them to. Can you help?
Thanks!
Mike

This topic was answered:
http://discussions.apple.com/thread.jspa?messageID=3744842&#3744842
You need to rename your photos using 001.name.jpg, 002, ect.
Your best bet is to open the set of images in your photo editor, like Aperture or Lightroom then sequence them to your liking then export the set of images to a seperate folder numbering them 001 to 999.jpg should be good to go.
Although I would think there must be a better way.

Photo displays

Similar Messages

Maybe you are looking for