Photo does not fit in the screen

I watched that video http://www.youtube.com/watch?v=KJMi5l9Ru-g and tried this to do the parallax scrolling with the image this on my page. Unfortunately, my photo does not fit in the whle screen, even if I take a . jpg image 3000 px wide. ( look here ) I have no idea how I can get the photo to fit in the whole screen.
Thank you for your help.
Heike

Hello again,
I'm sorry, but nothing works and I don't understand, what you mean. I will show you again with no other item on the page. I draw a rectangle which snaps each of the lines at the outside.
I got rid of the stroke and the fill.
I filled with a .jpg image 3000 px wide.
For the future parallax scrolling I need to set up the photo in vertical tile. And this is, how it shows on the screen.
I still have no idea, what I made wrong. Thanks for your help
Heike

Similar Messages

My picture is not fitting on the screen

When I use the hdmi input on my pavilion 27xi the picture does not fit on the screen. I have tried other devices and different hdmi cables to check that none of them were faulty but they werent. On the monitors image control settings there is fill to screen or fill to aspect ratio which cant be sellected. Is there any soloution??

stevblair97
Welcome to the HP Community Forum.
There is a solution in Windows and Linux; there may be a solution in OSX if you can get to the graphics controller on your Operating System and adjust the Aspect Ratio within the graphics controller software.
For example, NVidia and Intel provides software within Windows and / or Linux that allows one to adjust the monitor Aspect Ratio for primary and secondary monitors.
For Example:
In Windows, assuming one is running an Intel Driver, one need only Right-Click on the Desktop to gain access to the Intel Graphics Properties. While obviously different in OSX; it should be reliatively as easy to find the Graphics software, assuming you have access to it at all.
I am sorry I do not speak Mac else I could be of more direct help in the matter.
I hope this helps in some way.
Click the Kudos Thumbs-Up to show you appreciate the help.
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!
Kind Regards,
Dragon-Fur

IOS 8 iPad 3 in landscape - safari will not fit across the screen

While using iOS 8 iPad 3 in landscape - Safari Google searches will not fit across the screen. It use to and still does on my iPhone 5 using same iOS 8.
Does anyone know how to fix this please? When looking at a website it's ok.

DDid some testing (why the double "d" in did?)
ASsume (why is the "s" capitalized?) I have bob bailey set up for a shortcut of bo. As soon as I type Bo, it freezes.
I Had probably 50 shortcuts that I used constantly. Now I need to delete most of them. I was tired of typing my email addresses and home address etc so I devised shortcuts for them. With iOS 7 I could enter a shortcut and choose to use it or not while typing.
TAlk all about a huge step back. (Why dles it keep capitalizing the second letter?????? , see the word "talk" at the beginning of this sentence.
OK and why does the forum tell me im someone else and not let me post this? Arghhhhhhhhhhhhhhh

Field VIQMSM-MATXT(14) does not exist in the screen SAPLIQS0 7204

Hi experts,
I have a BDC calls QM02 Tcode in a custom report as follow:
PERFORM bdc_dynpro      USING 'SAPLIQS0' '7204'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=REAK'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'VIQMEL-QMNUM'.
CLEAR txline.
CONCATENATE 'VIQMSM-MATXT(' lnindex ')' INTO txline.
" txline = VIQMSM-MATXT(0014)
CONCATENATE 'PO #: ' alv_qmel-ponum INTO matxt SEPARATED BY space.
PERFORM bdc_field       USING txline
                                  matxt.
PERFORM bdc_transaction USING 'QM02'.
When debugging I found that the input bdcdata table contains a field VIQMSM-MATXT(14) in screen SAPLIQS0 7204.
Number 14 is the number of task of the notification which was not marked as deleted.
This field caused the error: Field VIQMSM-MATXT(14) does not exist in the screen SAPLIQS0 7204 after that.
I would like to know what does VIQMSM-MATXT(14) mean? How BDC can transfer VIQMSM-MATXT(14) to QM02? And How does it work?
Thanks,
Khanh

Hi Kostek,
I did not have the solution for this exact problem because our FA canceled this bug.
Check your test case carefully whether the screen of the TCode called by BDC has that field OR NOT. If that screen does not have that field in your special case, just ignore it.
Regards,
Khanh

Field BSEG-SKFBT does not exist in the screen SAPMF05A 0302

Hi
while posting parked documents using FBV0 i am getting following error.
Field BSEG-SKFBT does not exist in the screen SAPMF05A 0302
What can be the solution to above error.
regards
Rajesh

To eliminate this problem please use transactions OB14, OB41 and set for posting key and G/L account
field status for field BSEG-SKFBT 'Optional entry':
transaction OB14 AND OB41 -> Select group 'Payment transactions' -> 'Payment terms' -> set 'Optional'.
I think the SAP note 1073234 could correct this issue.
Thanks,
Daniel

Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB

Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,

yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB"   (usb device tree)
USB Bus:
Host Controller Location:          Built In USB
Host Controller Driver:          AppleUSBOHCI
PCI Device ID:          0x0026
PCI Revision ID:          0x0000
PCI Vendor ID:          0x106b
Bus Number:          0x18
Hub in Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x1002
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version:          0.0e
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Imation
Product ID:          0x0002
Vendor ID:          0x0718
Hub in Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x1002
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version:          0.0e
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Imation
Product ID:          0x0002
Vendor ID:          0x0718
USB Bus:
Host Controller Location:          Built In USB
Host Controller Driver:          AppleUSBOHCI
PCI Device ID:          0x0026
PCI Revision ID:          0x0000
PCI Vendor ID:          0x106b
Bus Number:          0x19
LaCie d2 DVDRW USB:
Capacity:          451.76 MB
Removable Media:          Yes
Detachable Drive:          Yes
BSD Name:          disk2
Version:          0.00
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          LaCie
OS9 Drivers:          No
Product ID:          0x1011
Serial Number:          FFFFFFFFFFFF
S.M.A.R.T. status:          Not Supported
Vendor ID:          0x059f
LaCie d2 DVDRW USB:
Capacity:          451.76 MB
Removable Media:          Yes
Detachable Drive:          Yes
BSD Name:          disk2
Version:          0.00
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          LaCie
OS9 Drivers:          No
Product ID:          0x1011
Serial Number:          FFFFFFFFFFFF
S.M.A.R.T. status:          Not Supported
Vendor ID:          0x059f

Field RF05A-NEWBK. does not exist in the screen SAPMF05A 0100

Hi,
We are doing the intercompany account payable postings through SAP EDI. The process following as below -
Delivery -> Intercompany Billing -> Account Receivable
--> IDOC -> Account Payable
While doing the EDI posting for AP, system giving the following message -
Field RF05A-NEWBK. does not exist in the screen SAPMF05A 0100
Best Regards
Goutham

Hello,
I am facing the Same issue for Inbound Idoc for Invoice.
I checked in debug mode as well and in BDC call we get a sucess message as
Field RF05A-NEWBK. does not exist in the screen SAPMF05A 0100
which beocme as error for Inbound IDOC.
Coundt get the field newbk on the screen for Invcoice . in which segment do we pass the value for this.
Can anyone please give more inputs on this.
Thanks
Ritesh Solanki

Field BSEG-HKTID. does not exist in the screen SAPMF05A 0332

Dear ALL,
Our client is ECC 6.0
we are facing a problem while posting the park document
Field BSEG-HKTID. does not exist in the screen SAPMF05A 0332
   Message no. 00349
Diagnosis
   The specified field does not exist on the screen.
Procedure
   Check your batch input data.
The above problem occurs only after the Patch level upgradation only.
SAP suggest refer your sap note 953374 House bank details : account id in the document.
It says activate the RE-FX component.
Any how we are not in the real estate business.
Please provide me your suggestion to resolve the problem.
Thanks for your cooperation
Regards,
laxminarayan

To do the same change with the transaccion FB02 y FB03, create an enhancemente point in the program: SAPMF05L dynpro: 1301, module: DYNPRO_MODIFIKATION, at the of perform open_fi_dynpro_mod and write:
LOOP AT SCREEN.
IF sy-tcode = 'FB02'.
    IF screen-name = 'BSEG-HKTID'.
      screen-input = 1.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
elseif sy-tcode = 'FB03'.
      IF screen-name = 'BSEG-HKTID'.
      screen-input = 0.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
endif.
ENDLOOP.
and, all ready.

Field BSEG-DMBTR. does not exist in the screen SAPMF05A 0302

Hi Gurus,
I am facing an error when uploading document in background through SM35(batch session)
1. 1. If i try to post the document in the forground system gives same message but on pressing enter it goes to next line item and ultimately posts the document. But if i try to post (SM35 session) in the back ground i am facing the issue"Field BSEG-DMBTR. does not exist in the screen SAPMF05A 0302" Message no. 00349
2. The system is ECC 6.0 recently upgraded from 4.7
It would be great if any expert can help to resolve this issue.
Thanks
Anand

Seems that your screen flow does not factor in the transaction currency. BSEG-DMBTR is only available for input when the transaction currency is different from the company code currency.
Your program creating the BDC session needs rework, or better use SAP standard tools for document posting (e.g. RFBIBL00 or one of the BAPIs available )
Thomas

Field BSEG-MEINS. does not exist in the screen SAPMF05A 0300

Dear Expert,
in cross-company sales process, issuing an IDoc to create a FI AP document, the IDoc was created and issued successfully by inter-compnay invoice, but in processing the IDoc to creat a FI AP document, there is a error message and that is "Field BSEG-MEINS. does not exist in the screen SAPMF05A 0300". i used the Units of Measurement"EA", and in the setting of Units of Measurement"EA" i already flagged the Units of Measurement"EA" as Primay code, but the error still appear again, please give me some useful advice!

Hi
Concerning message of "Fields BSEG-MEINS and MENGE are hidden in
SAPMF05A 0300", it was recommended to check which G/L accounts were
involved and to verify that fields BSEG-MEINS and MENGE were set to
'optional' .Please check the field statuses in OB41/OB14 for the
affected G/L accounts, whether the field as optional is set.
regards,
Ramana

Field BSEG-SKFBT. does not exist in the screen

Hi,
While doing FBV0 the document is not posting and it is showing the error message as below.
Field BSEG-SKFBT. does not exist in the screen SAPMF05A 0302
Message no. 00349
Diagnosis
The specified field does not exist on the screen.
Procedure
Check your batch input data.
govind.

Govind,
The filed BSEG-SKFBT (Discount base), is not available in the screeen SAPMF05A 0302.
This happens between Development, Quality and Productions cients. The sequence of fields differs with
respective to client.
In Development while recording (SHDB) field BSEG-SKFBT might have appeared on screen SAPMF05A 0301 but in Production or quality it might appear on some other screens
Ask Abaper to check this, as this might be available in SAPMF05A 0301 or SAPMF05A 0303 .
Hope this helps.
Regards
Velu Mudaliar

Field COBL-FKBER. does not exist in the screen SAPLKACB 0002

HI ALL,
I am facing problem when execute a BATCH JOB (sm35) for depreciation run(AFAB). It is giving an error:
349
Field COBL-FKBER. does not exist in the screen SAPLKACB 0002.
In the batch job, I noticed that there are 13 transactions have been processed successfully. Only 1 failed with above error message.
Please advise how to solve this problem.
Thanks in advance.

Hi ,
Go to the field status tcode OBC4 for the GL accounts you are trying to post to and set GSBER as optional.
It should work, refer to COBL-GSBER does not exist in the screen SAPLKACB 0002
Regards,
Fernando

Field KONP-KONWA. does not exist in the screen SAPMV13A 0201

Hi,
We have one BDC program to change Material Inforecord through transaction ME12. We have executed the BDC and Batch input session got created. When i execute the session, it is giving error "Field KONP-KONWA. does not exist in the screen SAPMV13A 0201 "
But when i checked in SE51 for Program SAPMV13A and screen 0201, field KONWA exist. I have checked in Transaction ME12, this field exist in the same screen. But still this error message is appearing.
Is there any something wrong in BDC program.

How are you handling the subscripts (row numbers)? Did you actually record this BDC in SHDB, or just try to write it? If not recorded, do yourself a favor and ALWAYS record your BDC sessions, then write to match that recording....
chances are you need to refer to KONP-KONWA(nn) where nn is the row number in the table control....

BDCDATA error-Field INVFO-ZUONR does not exist in the screen SAPLMR1M 6000

Hi
I am trying to call transaction MIR7 from ABAP code and passing values to the same.
I am able to pass data to first tab using code (as recorded in SHDB) :
    DATA BEGIN OF BDCDATA OCCURS 1.
    INCLUDE STRUCTURE BDCDATA.
    DATA END OF BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-PROGRAM = 'SAPLACHD'.
    BDCDATA-DYNPRO   = '1000'.
    BDCDATA-DYNBEGIN = 'X'.
    APPEND BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM     = 'BKPF-BUKRS'.
    BDCDATA-FVAL     = CompCode.
    APPEND BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-PROGRAM = 'SAPLMR1M'.
    BDCDATA-DYNPRO   = '6000'.
    BDCDATA-DYNBEGIN = 'X'.
    APPEND BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM     = 'INVFO-BLDAT'.
    BDCDATA-FVAL     = InvoiceDate.
    APPEND BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM     = 'INVFO-WRBTR'.
    BDCDATA-FVAL     = InvoiceAmount.
    APPEND BDCDATA.
    Call Transaction 'MIR7' USING BDCDATA MODE 'A'.
But when I add fields
    CLEAR BDCDATA.
    BDCDATA-FNAM     = 'INVFO-ZUONR'.
    BDCDATA-FVAL     = 'HELLO !!!!!'.
    APPEND BDCDATA.
    CLEAR BDCDATA.
    BDCDATA-FNAM     = 'INVFO-BKTXT'.
    BDCDATA-FVAL     = 'MY DATA .........'.
    APPEND BDCDATA.
I get an error message :
Field INVFO-ZUONR does not exist in the screen SAPLMR1M 6000
But when I add
    CLEAR BDCDATA.
    BDCDATA-PROGRAM = 'SAPLFDCB'.
    BDCDATA-DYNPRO   = '0150'.
    BDCDATA-DYNBEGIN = 'X'.
    APPEND BDCDATA.
before setting INVFO-ZUONR, the error disappears, still I don't get values in HeaderText and Assignment fields on GUI
Can anybody help.
Thanks a lot
Ruhi Hira

I had used the exact recording as in SHDB but no success.
Is it OK to create a parameter map this screen field to the parameter.
Where I can set the parameter outside the screen..
Ruhi Hira

HT202213 I own toshiba laptops. Both computers have the latest itunes software. However the 'show menu' does not appear on the screen?

I own toshiba laptops. Both computers have the latest itunes software. However the 'show menu' does not appear on the screen?

Thanks for the response diesel. I dont think I clarified my question very well. I'm trying to do home sharing between mine and my wifes computers. The intructions say:
Log in as the same user on each computer.
Ensure both are current version.
Choose the correct list in sharing ie Music
Then in the 'show menu' at the bottom of the screen, choose items not in my library.
I do not have the show menu to select any songs.
Any help appreciated.
Cheers

Photo does not fit in the screen

Similar Messages

Maybe you are looking for