Photo/Edit-In CS6. psd image does not show in LR after save/close.

Whenever I edit (a copy) of an image in Photoshop CS6 from Lightroom 4.3 (Photo/Edit-In), after I save and close the image in CS6 the new psd image does not show in Lightroom. In order to see the image in Lightroom, I need to close Lightroom and then reopen Lightroom. It is almost like Lightroom needs to "refresh". Does anyone have a solution that does not require me to close Lightroom? I have tried to use View/Sort by extension, filename, edit time, etc. with no effect.

This should not be so. I'm assuming that you do a <save> in CS6 - as opposed to <save as>. Only with <save> the image file will automatically be imported in Lr while <save as> creates a new file that Lr "knows" nothing about until you import it (for instance via "Synchronize folder").
If the behavior you describe follows a <save> in CS6 it is not normal.
This could be due to a corrupt Preference File. This file can go "funny" and is then responsible for all kinds of strange behavior of Lr. The remedy is replacing the Preference File.
BTW: Re-installing Lr does not replace the Pref. File since it is designed to "survive" upgrades.
See here for where to find the Preference file for your OS: http://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroo m-4.html
See here for how to go about Replacing the Preference File: http://lightroomers.com/replacing-the-lightroom-preference-file/745/

Similar Messages

When I open Photoshop CS6, the image does not show in Photoshop. The image IS open, i.e. the filename is shown on a tab and the image layers show in the layer panel. What is going on?

Both Photoshop and Bridge open as usual. But when I open an image, the image does not show in the image area. The image filename does show in a tab and the layers show in the layer panel. What is going on and how do I fix this.

I resolved the problem. It was somehow related to my using Microsoft
theme pictures. I set Windows to use the basic theme and the problem
went away. Thank you for the suggestions.
Jac

When i am editing in finalcut, my image does not look particularly good. do i need to export it at the end in order to see it in full high definition? thx

when i am editing in finalcut, my image does not look particularly good. do i need to export it at the end in order to see it in full high definition? thx

Open FCP X Preferences / Playback / Use Original... Media / Playback Quality...
How does the exported movie-file looks like...?
Regards
Nolan

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature, the photo is there. Why doesn't it show up in the folder?

I am looking for a specific photo in my event folder, it does not show up, yet when I use the search feature the picture is there. Why doesn't it show up in the folder?

What system and iPhoto version are you running?
If your're using iPhoto 9 or later Command (right) - click on the photo in the search window and select Show Event in the Contextual menu.
That will take you to the event where the photo is.
OT

I recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.

i recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.

fingers crossed, it appears they are working the bugs out of this update....i was able to post a pic to my newsfeeds/time line this morning....first the picture went into the ios album but within a minute, it appeared on my timeline! im glad ...

Image does not show up!

Hello. Im studying java swing and working on some experiment and badly need some help. Im using Graphics2D and not JLable or Icon for some reason. The problem is the image does not show up. What could be the reason and work around? Another, do you know any tutorial on the said matter? Thanks in advance.
import java.awt.*;
import javax.swing.*;
public class ShowImageGraphics
     //Graphics2D g2;
     public static void main(String[] args)
          new ShowImageGraphics();
     public ShowImageGraphics()
          JFrame frame = new JFrame("Sample Graphics");
          frame.setSize(200, 300);
          frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
          frame.getContentPane();
          frame.show();
     public void paint(Graphics g)
           Graphics2D g2 = (Graphics2D)g.create();
          Image img = Toolkit.getDefaultToolkit().getImage("/images/rocketship.gif");
          g2 = (Graphics2D)g;
          g2.drawImage(img,14,5,33,40, null);
}

import java.awt.*;
import java.awt.image.*;
import java.net.*;
import javax.swing.*;
public class ImageExample {
    public static void main(String[] args) throws MalformedURLException {
        URL url = new URL("http://today.java.net/jag/bio/JagHeadshot.jpg");
        JLabel label = new JLabel(new ImageIcon(url));
        JFrame f = new JFrame("ImageExample");
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.getContentPane().add(new JScrollPane(label));
        f.pack();
        f.setExtendedState(JFrame.MAXIMIZED_BOTH);
        f.setVisible(true);
}

HT4356 Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

It sounds like the features are working through the USB connection rather than the wireless connection since it is still not seeing the networks.
Everything points to a hardware failure since the steps provided through the private message did not work and the wireless test showed it had failed. Sorry.
You do have some options at this point.
If it is under warranty, either standard or extended, you can contact HP support at 1-800-474-6836 to have it serviced under warranty.
If it is out of warranty, you can still contact HP support to find out all the options and the cost of each option. However, it is my opinion that this money would be better spend being applied towards a new printer.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

CS6 Bridge (PC) does not show adjustments made in earlier Camera Raw, or even its own Camera Raw! PLEASE HELP.

PLEASE PLEASE PLEASE WILL SOMEONE WHO KNOWS ABOUT THIS CONTACT ME???
CS6 Bridge does not show ANY of the adjustments I've made in previous versions of Camera Raw, and sometimes (intermittently) doesn't show adjustments made in CS6 Camera Raw.
I'm on a PC, I've uninstalled and reinstalled about 6 times. I feel so upset, I've spent literally HOURS going in circles on the Adobe website, trying to get help on the phone (I'll pay!!!) but there seems to be no way to contact anyone. I've posted this problem several times and no one answers.
If you don't know the answer, can you please tell me how to get tech help even if I have to pay for it??

Thanks, Omke. I tried updating, then applying all the same fixes to the updated version. No change.
I can attach a screenshot, but I must block out names and faces. All you'll see is my Bridge interface, not the faces in the portraits. Hope that helps.
My specs:
Bridge CS6 5.0.2.4
Mac OS X 10.6.8
16 GB RAM
65 GB free disk space
2 monitors, 2 graphics cards:
ATI Radeon HD 4870
Type:    GPU
Bus:    PCIe
Slot:    Slot-1
PCIe Lane Width:    x16
VRAM (Total):    512 MB
Chipset Model:    NVIDIA GeForce GT 120
Type:    GPU
Bus:    PCIe
Slot:    Slot-4
PCIe Lane Width:    x4
VRAM (Total):    512 MB

Pasted image does not show when imported to AI

Mac OS 10.4.11 - Acrobat CS4. I made a contact sheet of images in Bridge which was saved as a PDF. In Acrobat I pasted another image (different size ratio) and saved again. However, when I placed the image in Illustrator the pasted image did not show, only the original contact images. It does not show at preview level either, but when the PDF is opened it is definitely there. I tried to 'flatten' it but cannot find a option that works.See attached file.

I would love to help you, but I'm totally lost as to what you are trying to do.
Here are my questions:
Mac OS 10.4.11 - Acrobat CS4.
There really isn't an Acrobat CS4. There is Acrobat 9 that shipped with CS4. But let's go one.
I made a contact sheet of images in Bridge which was saved as a PDF.
OK, that's good, I understand what you're doing.
In Acrobat I pasted another image (different size ratio) and saved again.
OK, this is where you lost me. Acrobat does not have a paste image ability. Exactly how did you get that image onto the Acrobat page? You copied from where? You pasted how? This is totally screwey.
However, when I placed the image in Illustrator the pasted image did not show, only the original contact images.
Placed what image? The original PDF contact sheet? Why are you trying to put it into Illustrator? There's no reason I can think of to do such a thing.
PDF is usually the final output form. It isn't a page layout tool to place into other programs.
It does not show at preview level either, but when the PDF is opened it is definitely there.
Still trying to figure out what you talking about.
I tried to 'flatten' it but cannot find a option that works.See attached file.
You have totally lost me. There is no "flatten" in PDF? That's in Photoshop? What are you doing???

Desktop 4.1.4 does not show calendar event after changing category

Palm Desktop 4.1.4 does not show (properly) a calendar event after changing its category and does not allow me editing it (on PC).
The event is seen as "grayed" region (no boarder and no 3D elevation shadow) although with different colors reminding the category ones.
Synchronization with my Tungsten E goes normally: I can see the event on the handheld, edit it, etc.
I use Win XP Pro 5.1.2600 SP3 build 2600 installed on Lenovo X61S (x86 based).
Thanks for any help.
Post relates to: Tungsten E

Make sure Category is set to all. Also try switching to a different category view then back to all.
Post relates to: None

MacBook Pro late 2013 does not show login window after waking from sleep

MacBook Pro late 2013 does not always prompt for login, but opens directly to desktop, even though security settings are setup to prompt for password after 5 minutes. Up to now, this only has happened on battery, machine goes to sleep or lid is closed, 10 minutes pass, lid is opened and desktop is shown instead of lock screen. Console shows, that the machine was actually sleeping (10 min no log entries) and also does not show any error in regards to login window.
This behaviour occurs randomly and I could not track down any root cause/behaviour, yet. Sometimes everything behaves as it should.
Any ideas?
Thanks
marcus

Count me in, I have the same issue, and from what I read here, it looks like a Yosemite/SSD related issue ?
I'm not 100% sure if it started when I put a SSD in my old iMac 2009 (as a fusion drive) or if that's after that when I upgraded to Yosemite...
I did disable auto poweroff like suggested in another thread : Mac freeze during the night sleep.
sudo pmset -a autopoweroff 0
We'll see if it helps.
It happens toughly a couple of times a week.

Edit/Display form does not show site columns after upgrade

https://social.technet.microsoft.com/forums/sharepoint/en-US/580111d4-72ca-4193-87ab-1dfd6082fa88/document-set-library-column-not-showing-up-on-edit-form
Hi all,
I don't think this is related to the above question, but the linked "solution" is as good as I can come up with, however it looks like its possible that ALL the libraries in the collection are suffering the same situation...
WHATS HAPPENING:
our site was migrated to 2013 from 2010 from 2007 and is running in compatability mode around 6-18 months ago. I'm pretty sure the old system is gone too - database backups might be obtainable... not sure.
There are a bunch of "site columns" that are used consistently across the collections libraries (there seems to be a general avoidance of "content types", don't ask me why, I don't know, I also don't know what would be involved in moving
them all to content types as many of the sites "views and webparts" use the content type columns to surface things all over the place, so I suspect it would be a big job), but folks have recently noticed that some documents are missing from various
pages (webparts that are gathering documents from these columns values).
But the problem is that it seems that since the update most (all?) of the document libraries NO LONGER enforce the requirement and litterally only show "name*", and "title" in display and edit properties...
Any ideas on how to get things back to showing the "proper" forms (I can only guess what this was from documentation and screenshots and general guessing based on the "commonness" of the columns in question)? Or is there a way to merge
or migrate "columns" to content types in some way that is either "collection wide" or non-breaking?
ANY assistance would be greatly appreciated!

So just to be sure are you saying that '2010 compatabilty mode' is causing these issues?
Just to be SUPER clear from my end this is what I'm seeing as an example;
For a collection
with site columns
many but not all lists
many but not all list items
--> are missing valid data in the site columns that have been registered for that list.
sample:
name          modified by    doctype     department
item1.docx   username   <blank> <blank>
item2.docx   username    WorkInstruction    Planning
if you click "edit properties" you are presented with ONLY the (I'm guessing) content types fields (eg: for Document you get Name and Title) and NONE of the other fields that should be specified.
However if you hit "save" you can see that the data in these fields returns to the "list view" (however it does not re-enable these fields from being active in the View/Edit properties pages).
Is this something that can be fixed? Or are you saying that we need to backup the DB and restore to a FULL version (not in compatability mode) of SharePoint2013? Or are you saying we need to revert to our PRE update backup and do something?
Its been many months since thsi upgrade was done and the system has changed a lot, so you can imagine we are reluctant to loose much of these changes...
Bazinga!

Psd file does not show preview in Creative Cloud Assets Activity Tab

I've tried to share a psd file however the preview will not show up in creative cloud assets under the activity tab. It only shows a blank page icon. Although, you can view the file in the extract tab. However, this is a problem because I need to be able to share the file with the client to be able to view and comment on it, and be able to switch between past and current versions. Right now they are not able to do that. I am using Libraries as well and have smart objects placed from my Library.

Please try the workaround posted here:
Re: Creative cloud doesnt create a cloud folder on my Users Folder?
This seems to have worked for a few other users. Hopefully we'll be able to release a fix to this issue soon.
Thanks,
Elba

IPad address book does not show contacts' details after iCloud setup

Hi everyone,
I setup iCloud today on my Mac and my iPad. It is working fine on my Mac - when creating new contacts they show up online and vice versa. However, a strange thing is happening on the iPad. iCloud syncs the contacts list fine - but when tapping on a contact (in the book layout on the left side) the app does not display any details of that contact on the right side. All it shows on the right side are three buttons: "Create new contact", "Add to contact" and "Send contact".
Does anyone have the same problem? Any tips/solutions?
Thanks!
F

I had the same problem on both my iPad & iPhone. I adding a contact on my iPad and now everything seems to sync properly. Hmmm, interesting..... THANKS FOR THE SUGGESTION.

My Nokia Lumia 710 does not show the balance after...

I like the Lumia range and am beginning to prefer WP7.x to Android but there is this irritating thing that whenever I make a call, I do not get my remaining balance which I used to get with all my previous phones, inlcuding the Nokia N900
All I wanna know is that am I the only one who is facing this problem or is this an issue with the OS.
I've contacted the Nokia Service Center and the guy there told me that WP7.5 does not support this feature and after browsing through the net, I am still unable to decipher if this is a problem with my device or are others facing the same issue as well.
This is my first post, please let me know if I did anything wrong.
Thanks in advance
Solved!
Go to Solution.

Correct. WP7 does not support this and if your mobile carrier does not offer an app for it, you need to visit their homepage for information on your remaining balance, etc.
Windows Phone 8 will have this built into the operating system. Sadly though, existing phones can't upgrade to WP8. So bug your carrier if they do not offer an app for this yet.
Microsoft Windows Phone MVP
Follow me on Twitter: @ThisIsMetro
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Photo/Edit-In CS6. psd image does not show in LR after save/close.

Similar Messages

Maybe you are looking for