Photo Editing Error Messages Using Actions in PSE8

Hello I am currently using pse8 to edit photos and I recently installed a few actions. My actions are in my photo effects folder and I can clearly see them, however when I try to use them it gives me error messages such as "could not complete action as part of a program error", "the command color balance is not currently available" and "the command make is not currently available".
Please help.

Any time you see "the command Make is not currently available", it generally means there's a step in the action that PSE doesn't understand. Not all photoshop actions are fully compatible with PSE--are you sure these actions work in Elements? And they need to be compatible with PS CS4, which is the underlying code for PSE 8.

Similar Messages

PSE 5.0 Photo edit error message when attempting to save edits.

After attempting to save photo edits with PSE 5.0, I get the message box "could not complete your request because of a program error." I have completed the task for a few years successfully and suddenly this glitch. These edits are basic fixes to shadows and contrast for my son's school trips and I dont want to save multiple copies, just replace original files, no heavy duty layer work. I am using Vista and have not had this problem in the past. I tried exiting the program a few times and started over, but same message box.
Thank you Andy

http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html

Invalid Edit Error Message

Hey guys, i was using final cut pro 4 to edit a movie for our film fest, and out of nowhere, the program is not letting us drag any clips into the timeline, it pops up with a message saying invalid edit. I tried to see if there was anything in the sequence options menu to help out but it crashed everytime i tried to open the options. I updated to FC HD and updated Pro App support, the program now works and i can get into the options menu, but i still get the Invalid Edit error message whenever i try to add a clip to the timeline, im going insane. please help

Hey guys, bit of an update, i am not able to bring any clips into the time line unless i go in and set an in point and an out point for each clip manually before i bring them down. It didnt always used to be like this so if anyone knows how to turn off the setting or otherwise fix what may cause this to happen please let me know.

Why do I always have "Insufficent Content for Edit" error message ?

Hi all FCE experts,
May I ask why do I always have "Insufficent Content for Edit" error message when I tried to overwrite or replace a clip ?
Ok,this is what happen:
I have a clip A (4 secs) followed by clip B (4 secs). Then in between I add a video transition.
After a while, I reckon I want to change clip B with another clip (say clip C). So, I went to brower & search for clip C which is 2 mins long clip. To make sure there are enough handles, I went to the centre mark an In point then 4 sec later mark an Out point. So I drag this clips C of 4 secs from the Viewer (I marked the In & Out point in the viewer) to the Overlay canvas & do an Overwrite but it says "Insufficent Content for Edit".
I then tried Replace also got the "Insufficent Content for Edit" error message.
I then tried to delete the video transition and repeat the above for overwrite and replace, both times I got the same error.
Any ideas ?
Thanks

Tom Wolsky wrote:
From your description there is no way either of these things should happen. Without seeing it I would guess there is something else going in your timeline or your clip which you're not telling us. *Perhaps there are I/O pints marked in the timeline*. Or the destination tracks are not set correctly. or something else.
Thanks Tom, you are correct.
I have In Point & Out Point marked on the Timeline. I used it when I did FILE > EXPORT and left it there. But once I cleared it, I am able to replace it with another clip.
But I am still puzzled as to why I cannot do any overwrite or replace when there is I/O points marked on the Timeline ? Especially when the section of clips I wanted to overwrite or replaced are located outside of the I/O points ?
Thanks

To display a continuos Error Message using BADI

Hi Everybody,
                    There's a transaction that makes use of classes and interfaces to display an ALV grid with input enabled frames and fields. There's a need to display an error message using a specified BADI method, which gets triggered after the user enters the input. The error message is working fine for the first time.<b>But when i'm trying to enter the same input and press enter after the error message, the transaction is getting closed. How can i display the same error message, until and unless the user enters the correct input ?</b> I've tried to trace the control using the debugger after the enter is pressed, but the debugger is also getting closed and the control is coming out of the transaction. Help me out in displaying the error message.

Hi,
Open the interface and go to the Methods tab.
Select the Method and click on Parameters.
In the method parameters, declare a variable
RETURN      Changing      Type     ALM_ME_BAPIRET2_T.
Now, inside your code, declare   DATA : ls_return TYPE bapiret2.
and populate this RETURN table, something like:
        if not ( wa_mara-mtart eq 'SPAR' or wa_mara-mtart eq 'ZMRO' ).
    CLEAR ls_return.
    MOVE 'E' TO ls_return-type.
    MOVE 'ERR_MESSAGE' TO ls_return-id.
    MOVE '999' TO ls_return-number.
    MOVE 'Enter proper error message here' TO ls_return-message.
    INSERT ls_return INTO TABLE return.
    endif.
Then, back in your program, check if this table is empty proceed otherwise, STOP or EXIT.
Regards
Subramanian

Send custom error message using IDoc conversion rule?

Hello,
I am using an Idoc conversion rule in BD79 to load cost centers. In my conversion rule I use a conversion exit function module to concatenate 2 specific characters and sending cost center value together and then this output value placed in the receiving cost center field. This works fine, but now I want to send a custom error message to the idoc and fail the idoc if the sending cost center value is greater than 8 digits.
Does anyone know how to send an error message or update an idoc with an error message using a conversion rule (bd79)?
Thank you,
Rhonda

Hi Rhonda,
Any luck on the below.. i have a similar issue...
Sorry to hijack your thread...

I must purchase a photo editing tool and don't know if I should go with Photoshop or Lightroom. I need to learn how to do basic photo editing on pictures used for a news website. Thoughts? Thanks!

I must purchase a photo editing tool and don't know if I should go with Photoshop or Lightroom. I need to learn how to do basic photo editing on pictures used for a news website. Thoughts? Thanks!

Hi scienceiscool,
You can go ahead with the photography plan as mentioned in the link below:
https://creative.adobe.com/plans/photography?promoid=KLXML
Kindly refer to the link below to get used to the application better:
Photoshop CC tutorials from novice to expert
Regards,
Sheena K

Getting Error Message using Formatted Search

Hi,
I am using formatted search for validating a particular field, and that happens fine. Kindly let me know if I can also display error messages using the same formatted search.
If yes, what am I to include in the formatted search, and if No, please let me know the alternative.
Thanks in advance.
Satish.

Hi Satish,
if you validate the value of a field and intend to rise an error message on detection of invalid values in a separate window or in the status line there is no way to do it with Formatted Searches (as far as I know)!
You could use the following methods as simple workarounds if you don't want to program a solution with the SDK:
1. Solution
You can display the text of an error message in the field you validate; of course, the invalid data then is overwritten with your error message, but you could construct the message from fixed text parts concatenated with the data found in the field.
Be sure to save the original data of the field in your query before you do anything else. This way you sustain the field data in case the data is valid!
Example:
DECLARE @save AS ....
SET @save = $[xxxxx]
IF $[xxxxx] test on invalid data
SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
ELSE
SELECT $[xxxxx] -- no error - sustain valid data
END
2. Solution:
You define a sepate User Defined Field (UDF) for potential error messages - that's the way I often programmed it for our own applications. Suppose that the Formatted Search is connected to this UDF and the field to validate is field 'xxxxx'. The Formatted Search is triggered (auto-refresh) on change of field 'xxxxx':
IF $[xxxxx] test on invalid data
SELECT 'Error: Invalid data: ' + $[xxxxx] -- in case of error
END
May be that there are minor syntactical errors or missing type conversions in the code above - but I hope it gives you an idea on how to solve your problem without SDK programming!
Good luck!
Frank Romeni

OS X 10.4.11 Unable to print photos. Error message, "There are no themes located. Until at one theme is istalled this cannot be carried out" Please advise. Thanks

OS X 10.4.1 Unable to print photos. Error message appears, " There were no themes located. Until at least one theme is installed this cannot be carried out." please advise.

Check out OT's post in this thread:
http://discussions.apple.com/thread.jspa?messageID=6394288&#6394288
Also, note his comments here:
http://discussions.apple.com/thread.jspa?messageID=6998840&#6998840
> Look in your User/Library/Application Support/iPhoto folder for a Themes folder. If you find it there move it to the HD/Library/Application Support/iPhoto folder and reboot. Then try iPhoto again. That may save you having to go thru the reinstallation.
Regards
TD

How to show error message using java.awt?

How to show error message using java.awt?
Which is the class corresponding to the JOptionPane?
Or I need to use Frame ?

No, JOptionPane is swing!
You would have to create your own frame, put your message in it, then show it.

General Error message using Kubota Actions?

I keep getting a "general error message" when attempting to use an action from my Kubota Dashboard. I'm using CS6 version 13.0.6 on a Mac computer. Anyone familiar with this issue? It works fine on my older laptop using CS6 version 13.0 and same Kubota Action palette.

Now my angles are out of sync and I can only see 2 at a time in the viewer window when there are supposed to be 3 but it switches between which 2 it wants to show. I have only a little experience with the multiclip settings. Is there something I need to do when re-opening a project with multiclip?

Script Alert: "Sorry I could not process the following files" (Error Message using Image Processor)

I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6. In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them. Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on. The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them. I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close. Thoughts on how I can fix this bug?

Hey Jeff--
No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
// app.activeDocument.ativeHistoryState = historyState;
The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
Hope this helps. May post more next week.

Error message with Action Script 2.0 file

Hi,
I am trying to edit an old flash file that uses Action Script 2.0. I am using CS6 and keep getting the following error message after publishing:
Scene 1, Layer 'AS', Frame 1, Line 5, Column 29
1067: Implicit coercion of a value of type int to an unrelated type String.
Can you suggest any fixes or workarounds? I also have Flash 4.0. Can i downsave the file? If so, how?
Thanks!

Thank you. I think that did fix the original two errors. But now upon test of the file, I get some new errors:
Symbol 'MoneySlider', Layer 'AS', Frame 1, Line 7, Column 3
1120: Access of undefined property ratio.
Symbol 'MoneySlider', Layer 'AS', Frame 1, Line 7, Column 20
1180: Call to a possibly undefined method number.
Symbol 'MoneySlider', Layer 'AS', Frame 1, Line 7, Column 27
1120: Access of undefined property _root.
Symbol 'MoneySlider', Layer 'AS', Frame 1, Line 9, Column 27
1120: Access of undefined property ratio.
And on the MoneySlide layer in Actions:
this.ratio = 0;
this.loadBar._width = 0;
this.dragger.ratio.text= "$0";
dragger.onPress=function(){
          this.startDrag(true,0,0,line._width,0);
          this.onEnterFrame=function(){
                    ratio=Math.round(number(_root.transitBenefitLimit/100)*(this._x/(line._width/10 0)));
                    loadBar._width = Math.round(this._x);
                    dragger.ratio.text= "$"+ratio;
dragger.onRelease=dragger.onReleaseOutside=stopDrag;

Edit error message as displayed when browsers fail to display dynamic pdfs

I'm sure many people here are aware of the problems that arise when many browsers attempt to open a dynamic writable pdf. The built in plugin that ships with most browsers is unable to display the content, and as a result the following message is shown.
"If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download.
For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader."
(I trimmed a bit because the message is quite long)
My question is, is there some way to modify the message above by editing the pdf using a program like Adobe Livecycle or Acrobat Pro? The message that displays is basically useless, because the problem is actually due to the browser's inability to display the pdf. If it is possible to replace this message with something more meaningful, such as instructions on downloading the form with right click, that would be fantastic for the users.
Does anyone know where this information is stored? It doesn't seem to be browser specific (as the browsers I've tested seem to display the same message).

I got the error messages to work from properties file and some helper class, but not through just defining in faces-config or web.xml.
I am sure there is a better way to do but hopefully this will help you.
FacesContext context = FacesContext.getCurrentInstance();
In my validation method - I have the following code, which will associate
the appropriate message
String failureMsg = ErrorMessages.getString("SignUpData.NO_USER_NAME");
FacesMessage message = new FacesMessage(FacesMessage.SEVERITY_ERROR,          failureMsg, failureMsg);
context.addMessage("login_form:username", message);
My properties file - errormessage.properties - have the following info
SignUpData.NO_USER_NAME =Please Enter User Name
SignUpData.NO_PASSWORD =Please Enter Password
Helper class - ErrorMessages.java
import java.util.MissingResourceException;
import java.util.ResourceBundle;
public class ErrorMessages {
private static final String BUNDLE_NAME = "com.path1.path2.resources.error_messages";
private static final ResourceBundle RESOURCE_BUNDLE = ResourceBundle.getBundle(BUNDLE_NAME);
private ErrorMessages() {
public static String getString(String key) {
try {
return RESOURCE_BUNDLE.getString(key);
} catch (MissingResourceException e) {               return '!' + key + '!';
I am also looking for a way to avoid all this extra helper classes if there is a better alternative.
thanks
ponni

Error message using the getPreferredSize() method

Hi to all.
I'm having sometimes an error message, about this code:
public void removeUpdate(DocumentEvent e) {
        Dimension size = getSize();
        Dimension preferred = getPreferredSize();
        if (size.width >= ANCHO_MINIMO) {
            size.width -= 10;
        } else {
            size.height = preferred.height;
        this.setSize(size);
        _transicion.setCambioAsociado(this.getText());
}The error message:
Exception in thread "AWT-EventQueue-0" javax.swing.text.StateInvariantError: infinite loop in formatting
        at javax.swing.text.FlowView$FlowStrategy.layout(FlowView.java:422)
        at javax.swing.text.FlowView.layout(FlowView.java:184)
        at javax.swing.text.BoxView.setSize(BoxView.java:379)
        at javax.swing.text.BoxView.updateChildSizes(BoxView.java:348)
        at javax.swing.text.BoxView.setSpanOnAxis(BoxView.java:330)
        at javax.swing.text.BoxView.layout(BoxView.java:682)
        at javax.swing.text.BoxView.setSize(BoxView.java:379)
        at javax.swing.plaf.basic.BasicTextUI$RootView.setSize(BasicTextUI.java:1619)
        at javax.swing.plaf.basic.BasicTextUI.getPreferredSize(BasicTextUI.java:813)
        at javax.swing.JComponent.getPreferredSize(JComponent.java:1624)
        at javax.swing.JEditorPane.getPreferredSize(JEditorPane.java:1227)
        at STNMaker.vista.TextoInferiorTransicionesPanelVista.removeUpdate(TextoInferiorTransicionesPanelVista.java:313)
        at javax.swing.text.AbstractDocument.fireRemoveUpdate(AbstractDocument.java:242)
        at javax.swing.text.AbstractDocument.handleRemove(AbstractDocument.java:607)
        at javax.swing.text.AbstractDocument$DefaultFilterBypass.remove(AbstractDocument.java:3105)
        at javax.swing.text.DocumentFilter.remove(DocumentFilter.java:51)
        at javax.swing.text.AbstractDocument.remove(AbstractDocument.java:572)
        at javax.swing.text.DefaultEditorKit$DeletePrevCharAction.actionPerformed(DefaultEditorKit.java:1030)
        at javax.swing.SwingUtilities.notifyAction(SwingUtilities.java:1576)
        at javax.swing.JComponent.processKeyBinding(JComponent.java:2772)
        at javax.swing.JComponent.processKeyBindings(JComponent.java:2807)
        at javax.swing.JComponent.processKeyEvent(JComponent.java:2735)
        at java.awt.Component.processEvent(Component.java:5379)
        at java.awt.Container.processEvent(Container.java:2010)
        at java.awt.Component.dispatchEventImpl(Component.java:4068)
        at java.awt.Container.dispatchEventImpl(Container.java:2068)
        at java.awt.Component.dispatchEvent(Component.java:3903)
        at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1826)
        at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:681)
        at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:938)
        at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:810)
        at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:645)
        at java.awt.Component.dispatchEventImpl(Component.java:3941)
        at java.awt.Container.dispatchEventImpl(Container.java:2068)
        at java.awt.Window.dispatchEventImpl(Window.java:1791)
        at java.awt.Component.dispatchEvent(Component.java:3903)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:269)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:190)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:184)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:176)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)I'm using NetBeans 6.1 and the class extends from a JTextPane and implements a DocumentListener.
Anyone knows how to solve this problem?
Thanks for read.

Thanks for your response, uncle_alice.
If I change the code and I do it like this, could it work right?
public void removeUpdate(DocumentEvent e) {
        Dimension size = getSize();
        if (size.width >= ANCHO_MINIMO) {
            size.width -= 10;
        } else {
            size.height = getPreferredSize().height;
        this.setSize(size);
        _transicion.setCambioAsociado(this.getText());
}Thanks for read.
Edited by: Daniel.GB on 11-ago-2008 2:02
Sorry, before I had not changed the code.

Photo Editing Error Messages Using Actions in PSE8

Similar Messages

Maybe you are looking for