Photo effects in flex app

HI,
I have implemented basic image effects into flex app, such as opacity, darkness etc.  I am looking for some advanced effects such as, paint, cartoon etc, ones you can find in fotoflexer.com or lunapic.com
Can anybody suggest something? algorithms?

So, I'm going to take this as no one's noticed, and no one knows how to get these effects in other apps. Thanks everyone!

Similar Messages

  • Photo effects in Address Book.

    Has anyone noticed that there are a larger number of effects that you can apply to photos in Address Book? These effects are not available in Photo Booth or iPhoto '08. Anyone know how to get them for those applications?
    Message was edited by: mrlibrary03

    So, I'm going to take this as no one's noticed, and no one knows how to get these effects in other apps. Thanks everyone!

  • Warpatron - Photo effects.

    I'm pleased to announce that Warpatron for the Playbook is now available from the App World.
    Blackberry App World : Warpatron
    Warpatron : Home page and further information
    Warpatron allows you take photos with special effects directly on your Playbook. Preview and adjust the effects in real-time using the multi-touch screen controls and save your master-piece to JPG or PNG in your photo library.
    Features : 
    - Choose from a wide variety of special effects.
    - See the effect preview in REAL-TIME then take the picture.
    - Change the effect parameters and see the difference in REAL-TIME.
    - Change parameters using multi-touch controls.
    - Switch between front and back cameras.
    - Save your masterpieces in JPG or PNG format.
    - Full device rotation support
    - Add a picture frame from the collection provided.
    Special Effects :
    - Black and white
    - Greyscale
    - Colour Isolation
    - Sepia colouring
    - Hue/Saturation
    - Fake thermal colouring
    - Sketch-like
    - Cartoon colour reduction
    - TV Scanline
    - Pixelate
    - Noise
    - Mirror
    - Sphereize
    - Twirl
    - Ripple
    - Zoom
    - Zoom/Speed Blur
    Greg Caldwell : Geepers.co.uk : @Warpatron : @Greg209 
    Ground Rush | Warp-a-tron : Photo Effects. | Sum It All Up
    Web : www.geepers.co.uk | Twitter : @Greg209

    Warp-a-tron for the Blackberry Playbook has been updated to V1.2.
    Along with the original wide range of effects you can add to the Playbook's camera (front or back), in real-time, a new 'Halftone' effect as been included.
    This can give your images a magazine/newspaper 'print' look. Coupled with the background images, frames you can add and vignetting you can create some astonishing photo's straight from the Playbook camera.
    You have full control over the size of the 'Halftone' blobs and rotation of the pattern. You can change the foreground and background colours or even opt to have the background transparent.
    Check out the Flickr photos at : http://www.flickr.com/photos/greg209/sets/72157628144647395/
    Greg
    Ye Olde Laptop
    Halftone castle in blue
    Ground Rush | Warp-a-tron : Photo Effects. | Sum It All Up
    Web : www.geepers.co.uk | Twitter : @Greg209

  • What iPhone app does this to photos?, What iPhone app does this to photos?

    The effect is like light streaks I've seen it a lot on instagram but idk how to get it??  The link below shows what it looks like if anyone knows please show me! Thank u so much
    Example link
    http://www.photoshopessentials.com/photo-effects/light-streaks/

    Hi! I'm glad you asked this question. There a quite a few apps that will add that effect but a very popular one and free would be Pixlr-o-matic

  • Flex app doesn't work when moved from original location

    I'm trying to make an image gallery in flex. It works when I run it in Flex Builder perfectly fine. The html and swf files from the bin-debug folder work perfectly fine when opened in any browser also, but ONLY when those files and all related files are opened from the default location that the application was built in. When I export a build to a different folder, the swf loads but none of the information from the xml file displays. I tried setting all of the paths of the reference files (namely the xml) in the flex app to the exact absolute location on the server, and it still didn't work when I uploaded it to the server.
    I've tried several approaches starting from scratch and they have all come up with the same issue. I'm working with an educational license for Flex Builder, I'm not sure if they jip you on those and ruin the compiled swf.
    Please help! I'm losing my mind over this.I think it has to do with something else besides the code since it works fine when I hit "Run", but if anyone thinks it will help to post the code let me know.

    when you build an application using one of the wizards (like coldfusion flex application wizard) it hard codes
    paths to cold fusion CFC's, and sometimes gets it wrong.
    If your application references cfc's (or other remote objects) then it may be necessary to adjust the flex code
    when moving the code into a different base folder.
    For example in my own application, the url is http://localhost/crm_dev_flex and the built application gets put into
    c:\inetpub\wwwroot\crm_dev_flex\bin-debug
    References in the code to components found in c:\inetpub\wwwroot\crm_dev_flex\bin-debug\components\cfgenerated
    (in the flex code these looks like crm_dev_flex.bin-debug.components.cfgenerated.<mycomponent> )
    These need to change when you move the code to somewhere else.
    Also, if you are using wizard generated cfc's then these also contain similar references that need to be changed.
    IHTH.
    Cheers

  • File not Found Error in Flex APP-MDI

    Hi Friends,
    In my Flex APP-MDI application  have error.Th error is given blew.How can i solve this problem,please any one help to me.
    Error:
    File not found: file:/C:progmfiles/AdobeFlashBuilderBeta2/amdiBasicExample_1_1_1/bin-debug/amdiBasicExamp le.html
    Thanks,
    Magesh R.

    You would do better to ask this in the developer forum, not the user forum.

  • I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build.  The same call works fine when running on the device

    I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
    I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
    The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
    I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
    I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
    By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
    Anyone have an idea on other things to try to debug/resolve this?
    Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
    Thanks!

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • IPhone iOS 8: Tapping on photo icon in messages app causes app to crash

    Issue (?ios 8 bug?): Tapping on photo icon in messages app causes app to crash. Present in ios 8.0, and also still in ios 8.0.2. iPhone 6+ 64GB.
    I just wondered if anyone else has been having this problem.
    Initially it worked great. Tapping the photo button next to the text box in message should bring up a menu with your latest photos and other sharing options. However, after the first couple of days, tapping the button brought up the menu, the phone freezes, and then after a few seconds the photo app crashes.
    Deleting most of my photos restored the function, but after another couple of days (and some more photos) it started happening again so I think perhaps it is related to the number of photos. After about 5-10 photos it loads the menu very slowly and its quite buggy. After 20+ photos it wont load the menu at all without freezing and the app crashing.
    My iphone 6+ was set up as a new phone (not restored from back-up).
    I hope this is some kind of bug that will be fixed in ios 8.0.3, but wondered if anyone else has the same problem or has any solutions?
    My workaround at the moment is just to go the photos app and either copy and paste the photo into a message, or share the photo via the photos app.

    I have this same issue with my 128 gb 6 plus.  I've tried restoring as new on a few occasions, but to no avail.  I did notice while my pc was synchronizing my apps, that the feature worked fine a few times until the synchronization was complete.  I seriously hope that the numbers of photos limits one's use of the feature, because i purchased the 128 gb 6 plus so that i could keep photos at my ready.
    Has anyone heard of a solution yet?

  • Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to setting-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
    LN

  • Deployment of Flex app to web and app server

    Hi
    I'm working on putting a Flex front-end on an existing J2EE
    app which gets deployed as an ear file. The architecture consists
    of web server, app server and database server. Is the following
    approach to deployment possible / recommended?
    My Flex app will be deployed to the web server. The J2EE ear
    file will be deployed to the app server (Weblogic). BlazeDS will be
    bundled within the ear file as a war file. Remote Objects will be
    configured in my BlazeDS configuration files to enable me to access
    the code in my J2EE app. In the compiler options of my Flex app,
    I'll be setting the server root folder and server root URL to point
    to the BlazeDS war file on my app server.
    At present I'm at the stage where I can run my Flex app
    directly from Flex builder on my development PC and it's able to
    connect tto the J2EE app, which is running on the app server
    (Weblogic) also on my development PC. I can't find documentation
    explaining how to extend this to work on a multi-tier architecture.
    Thanks
    David

    Hi,
    I replied to your post in FDS forum. Please visit the URL
    below for the response.
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=583&threadid=1373523
    Hope this helps.

  • Dynamic photo gallery in flex

    superb post for a Dynamic photo gallery using a xml generated flex application http://flexlearner.wordpress.com/2009/09/04/dynamic-photo-gallery-in-flex/

    try:
    txfe.text = xmlFile.section[int(m.currentTarget.details) -1].details;
    instead of
    txfe.text = xmlFile.image.[int(m.currentTarget.details) -1];
    and add your thumbs to gal, not the stage.  when you're done with the gallery, remove gal.

  • Adobe AIR Needed on Android / iOS to Run Adobe Flex Apps

    Hi all,
    I want to confirm if the user has to install Adobe AIR before launching Adobe Flex apps on Android and iOS Devices. Is there any way that we could embedd Adobe AIR setup in the app file so that the user dont have to hastle in installing Adobe AIR.
    Taimur

    It gives you only three options:
    Signed packages for each target platform.
    Signed AIR package for installation on desktop.
    Intermediate AIRI package that must be signed later.
    For mobile apps, we need to select the first option to get the .apk and .ipa file as the second option would generate .air file. None of the options offer to package AIR runtime. Only the first option gives you the option on NEXT window to include the download link of AIR Runtime.
    If i am wrong, kindly point me to that specific checkbox.
    OR do i have to put Runtime.apk in the assets folder of my source code so that it gets packaged?

  • Flex App with remoting works on local Apache server - fails on production server

    Hi Everyone,
    I have a Flex app that uses Data Services. The application works correctly on my local Mac Server and Apache. When uploaded to my production CentOS server, the Data Services fail. When the app is done loading, the following error message comes up:
    Class "ModelsService" does not exist: Plugin by name 'ModelsService' was not found in the registry; used paths:
    : /www/html/mdubb//PHP2/bin-debug/services/
    #0 /var/www/html/mdubb/ZendFramework/library/Zend/Amf/Server.php(550): Zend_Amf_Server->_dispatch('getAllModels', Array, 'ModelsService')
    #1 /var/www/html/mdubb/ZendFramework/library/Zend/Amf/Server.php(626): Zend_Amf_Server->_handle(Object(Zend_Amf_Request_Http))
    #2 /var/www/html/mdubb/PHP2/bin-debug/gateway.php(73): Zend_Amf_Server->handle()
    #3 {main}
    Where getAllModels is a method of my custom ModelsService.
    I changed the Zend path in the amf_config.ini file so it references the correct directory. If I browse to gateway.php, it prompts to download the file, which I think is correct.
    I added in the config file the path to the services folder.
    I tried adding $server->addClass("ModelServices") in gateway.php, but it didn't like that.
    The file structure on the production server is the same as the local server (I litterally uploaded everything in my local web root), so I can't think of what would be differenet between the two.
    I have already pulled one all nighter trying to get this to run. Do you know what I should troubleshoot next?
    Thanks in advance,
    Ryan

    Hi,
    With reference to Lumira 1.15, the minimal SP we support is BI 4.0 SP6. Please upgrade at least to this. Everything is detailed in the PAM https://websmp107.sap-ag.de/~sapidb/011000358700001095842012E
    Best regards,
    Antoine

  • Loading purchased swf into Flash Builder 4 Flex app

    I have purchased a Flash "fundraising thermometer" from an online Flash components site. It takes input from an xml file and displays a thermometer with the goal at the top and the current amount raised indicated. It came with the following files:
    thermometer.swf
    thermometer01.fla
    thermometer01.html (A sample that works.)
    xml/thermometer.xml (The source file: goal amount, current amount, mark interval, etc.)
    caurina/transitions (Mostly .as files.)
    Since the test html (thermometer01.html) works fine, I thought this would be a no-brainer.
    I first unzipped the files into a "thermometer" folder in my current project. I then went into Flash Builder and created a SWFLoader object as follows:
    <mx:SWFLoader 
    id="myLoader" source="../thermometer/thermometer.swf" complete="initThermometer();" autoLoad="true" scaleContent="false"/>\
     private function initThermometer():void { 
         Alert.show('Thermometer loaded');
    The Design view looks fine. I can see the thermometer default image (see below).
    When I run the app, I get no errors, just a broken image link in a box (see below). The alert box also never shows up.
    I'm new to Flex, so I may be doing something stupid that keeps this from working. I contacted the author of the thermometer widget but he doesn't know anything about Flex.
    Any help figuring out how to get this to work in a flex app would be appreciated.

    You should probably add more event handlers to see what's going on.  Especially "ioError". The complete list is below.  For coverage, add a handler for each event. You can also use in MXML
         complete="initThermometer(event)
    and add an argument to your Actionscript method, to find out details about the event.
    private function initThermometer(event:Event):void { 
         Alert.show('Thermometer loaded ' + event.type);}
    Events
        complete="No default"
        httpStatus="No default"
        init="No default"
        ioError="No default"
        open="No default"
        progress="No default"
        securityError="No default"
        unload="No default
    General info here:
         http://livedocs.adobe.com/flex/3/langref/mx/controls/SWFLoader.html
    I did not test my code suggestions, but it's probably close.

  • Why would I need to use LiveCycle Data Services in a Flex app?

    I cannot figure out what additional functionality is provided by using LiveCycle Data Services in my Flex apps.  I cannot get a clear understanding of how using LiveCycle Data Services would benefit my applications.  Does someone out there use LiveCycle Data Services?  If so, what do you do with it in Flex?
    Thanks!

    - data push for publish/subscribe implementations
    User has to do nothing to get updated information. You push it to their machine when new data is available, like Yahoo finance updated quotes.
    - data paging
    You don't want to display one million rows in your datagrid at once. Get a batch of data, if the user scrolls down, get the next batch, etc.
    - server side clustering
    One server does not get overloaded. High traffic sites have their large number of concurrent connections managed more efficiently.
    - JMS services
    JMS is a powerful technology for messaging throughout an application, and LCDS makes it much easier.
    - RTMP tunneling
    Allows the use of the RTMP protocol in LiveCycle Data Services applications. Makes it easier to traverse firewalls and proxies appropriately that currently prevent direct RTMP client connections to the server.
    If this post answered your question or helped, please mark it as such.

Maybe you are looking for