Photo effects missing in iMovie project

I have modified photos adding effect and optimizations with iOS standard pictures editing. I can see picture effects also if I open images with iPhoto. when I add pictures to iMovie project all effect are missing, pictures are used in original format.
how I can see picture effects in iMovie?
thanks,
Mario

Something similar is happening to me. I created a project a couple of months ago in iMovie '08, and now the "upper window" thumbnails are showing with an exclamation mark - but just the video clips! The photos are still there. You can see the thumbnail with the exclamation mark and when you drag the cursor through it to see it play, it only does in the little damaged thumbnail but not in the screen. After touching it, it becomes black. It does not play at all when the project is played completely. I someone finds out how to solve this, please advise.
Thanks so much.
Lol@

Similar Messages

  • A number of imported photos from iphoto in imovie project all show the same image whilst the preview before dragging them in is correct. What could be the problem?

    A number of photos from iphoto used in imovie project all show the same image when playing back. The previw when clicking and dragging them and also the pictures in the storyline. Yet when playing the clip a previous immage keeps on appearing. What could be the problem?

    You created a mess and there is no solution - with the actions you have taken those photos are gone unless you have access to them from some other source - they existed in two place - in your iPhoto library and on your backup drive - you have traded the backup drive and restore an earlier iPhoto library so all you have is what you have
    LN

  • Moving I photo libraries without impacting IMovie projects

    I Use IMovie to create slide shows. However no I want to move my IPhoto library to a new location. After doing this all pictures in IMovie projects were gone. Any Idea? is there a difference in the result between moving and copying?

    What verion of iPhoto and system are you running?
    Did you confirmed that the library working correctly and that the videos play as expected before deleting the library from your boot drive?
    How is the external hard drive formatted?  It must be OS X Extended (journaled) with ownership set to be ignored:
    Then point iMovie to the new iPhoto in its new location.
    OT

  • Files missing in iMovie projects

    Hi,
    got a big Problem:
    I tried to export a movie and right before the export been finished iMovie crashed and left all my projects unuseable.
    Almost all Clips in most of my projects are marked with this annoying triangle meaning the file's missing now.
    Strange thing is, all of them r still in my camera roll - accessible and viewable.
    Any suggestions?

    See if this helps.   https://discussions.apple.com/thread/6071629?tstart=0

  • Ripple effect missing in imovie

    Just wondering what happened to the Ripple effect in imovie. Can it please be put back in an upcoming update.
    Sorry if this is posted in the wrong section!
    Thank you

    See this thread:
    https://discussions.apple.com/thread/4023258?start=0&tstart=0
    John

  • IMovie projects on Apple tv

    Can an iMovie project be looped when it has synched with Apple tv? (like you would would just photos?)

    Can an iMovie project be looped when it has synched with Apple tv? (like you would would just photos?
    No. The ability to "loop" a selection is a property of the "player" application. If the player doesn't understand a "loop" instruction, then it would be ignored.

  • How do I include the photos in a imovie project to the finished dvd so the users can have access to them?

    I've included alot of old photos in an iMovie project and would like to include them on the finished DVD I create with iDVD. I woud like the users to be able to have access to them so they can print them, store them on their own computer or whatever they would like to do. How would I do this?

    You do this by creating a DVD-ROM section on your DVD. See this explanation from iDVD Help.
    Adding files to the DVD-ROM portion of a disc
    You can let viewers copy files directly from your DVD by adding the files to the DVD-ROM portion of the disc. These files are burned onto the DVD and are accessible when the disc is viewed on either a Windows PC or a Macintosh computer, but not a DVD player.
    You can add any kind of file to the disc. For example, if your disc contains a slideshow, you can add the image files to the DVD-ROM portion of the disc so viewers can download them to their own computers and print them. You can also add a file containing your movie production notes and other “extras.”
    To manually add files to the DVD-ROM part of your disc:
    Choose Advanced > Edit DVD-ROM Contents.
    The DVD-ROM Contents window opens.
    Click Add Files, or click New Folder first if you want to create a folder to put the files in.
    Browse to select your files or folders, then click Open to add them to the disc.
    You can also drag files directly to the DVD-ROM Contents window. When you are done, just close the window.
    When you add a file to the DVD-ROM portion of your disc, before you burn the disc the project contains just a reference to the location of the file on your hard disk, not the actual file. So if you delete a file from your computer or move it from its location after adding it to the DVD-ROM contents, you get a “File not found” message when you try to burn your disc. You can either remove these missing files from the DVD-ROM contents or find them on your computer and put them back in the original location so iDVD can access them.
    As you add files to the DVD-ROM contents, be sure to check the DVD Capacity meter in the Project Info window to find out how many gigabytes of disc space are being used. The Capacity meter shows the disc space taken up by the video portion of the disc as well as the DVD-ROM portion.

  • IMovie 10.0.4 Ken Burns effect missing

    Using iMovie 10.0.4 on an iMac running 10.9.    I selected Adjust, Crop and only have options to rotate or crop.  I tried this on various clips - new and old.  No options

    Is the photo you're trying to apply the Ken Burns effect to in a Project? It won't work if it's just in an Event.
    More details here:
    http://help.apple.com/imovie/mac/10.0/#movc6e02f503
    http://help.apple.com/imovie/mac/10.0/#mov26d3f6a6c
    Matt

  • Missing hard drive space after aborted attempt at sharing iMovie project with YouTube

    So, recently I tried sharing an iMovie project with YouTube.  I clicked on the project in my project library, then selected share with YouTube from the drop down menu.  I chose to share it as a HD 720 project.  At this point, I had 27 GB of free hard drive space. After the project was converted (or whatever it's called, a process which took about half an hour, and which left me with about 6.5 GB of hard drive space), but before the project was actually exported or shared with or uploaded or published to YouTube (the second step), I saw that it was going to take three hours to upload, so I decided I wanted to share it as a non-HD video, in order to save time and space on my HD.  I cancelled the upload.  I then deleted the project in my imovie projects folder (since it now had the HD logo beside the name), intending to just start over and share the project in 960x540.  Thing is, after deleting every trace of it I could find in iMovie, in my Documents Folder, in my Movies folder, and in iTunes, I only reclaimed 4 GB of space on my hard drive (leaving me with 10 GB).  So what happened to the missing 17 GBs, and how can I get them back?  Also, the amount of space used in order to share that project just seems excessive to me, so I realize that something else might be going on here.  Thoughts?  Suggestions?  Comments?
    Thanks.

    You're in the wrong forum.
    https://discussions.apple.com/community/ilife/imovie

  • Convert photo in iphoto to put into iMovie project without affecting quality

    Hi, hope someone can help. I am trying to put a photo from iPhoto into an iMovie project, but no matter what pixel change i try, whenever i put it into the iMovie project I get black bars each side of the photo and the photo doesn't fill up the full movie screen. Does anyone know if there's a way to do this without affecting the quality of the photo?

    This happens because the image is a different aspect ratio from the movie, so make sure that you're cropping to the same dimensions.

  • Import video from Photos app (OS X) / iCloud drive to iMove project

    I have some video clips on my iCloud drive that appears in my Photo app on OS X, that I want to edit in a iMovie project on my MacBook. How do I import these. I can't drag and drop from the Photo app to iMovie.

    If you turned off or uncheck iCloud Photo Library and My Photo Stream in the Photos app preference window, then the delete should not sync up to the cloud. Also, until you empty the 'Recently Deleted' container, the images are still on your Mac:
    https://help.apple.com/photos/mac/1.0/?lang=en#/pht3bfab2f96
    Deleted photos and video aren’t immediately removed from your library; they’re placed in the Recently Deleted album, where they remain for the number of days shown, and then are deleted. You can recover the items before that period of time (see the next task). If you have iCloud Photo Library turned on, the photos may remain in iCloud up to 40 days and then are removed from all your devices that use iCloud Photo Library. If you’re not using iCloud Photo Library, your deleted photos are removed from your Mac only.

  • Trouble adding photos into iMovie project

    In one particular Project, when I try and add still photos, when I drag them into the project window I see the green line and the green 'plus sign', but then the pictures are not actually added...why is it doing this? It works in other Projects, so I'm wondering if it's just a glitch.

    I had this problem last year (August-Sept 2007), and I'm having it again now (August 2008). When I import jpeg photos from iPhoto to iMovie, they turn black and are not accessible in iMovie. In addition, this time when I imported several photos, the replay of the iMovie became jerky. When I threw out the photos, the movie became smoother, the way it was originally. There seems to be some sort of bug that has not been fixed in over a year.

  • Preset or change duration of still photos in iMovie project

    Hi,
    I work with iMovie 11 and never had any problem with previous versions.
    Now I'm doing my first project in iM 11 and it just ignores my requests
    When I set the duration in 'Project Properties' 'Apply to all photos' to e.g. 4 sec it will set the duration anything from 5 to 7 sec and no matter how often I change it will not react. If I set it to 3 sec (as an example) it will allow 5 sec. but never what I would like the duration to be.
    This is a really annoying issue, more so when there a lot of still photos in the project.
    Is there any way to rectify this or what else can I do???
    thl

    "problems setting duration for still photos and transitions in iMovie '11"
    A number of people have experienced the same problem and written about it on discussions. Lots of difference solutions as well. If you search using the title quoted above, you can read the solution I found. It's more complicated than it should be. I've never had to fiddle as much with duration times for transitions and still photos. Nevertheless, the steps I have described work for me. You will also find the steps another reader offered that may work for you if all of your transitions are set for the same durations and all of the still photos are as well.

  • Can I delete photos from iPhoto that were used in an iMovie Project?

    I made an iMovie Project with a lot of photos from iPhoto. I don't want some of the photos anymore. I would like to delete them from iPhoto but I am afraid it might affect the iMovie Project. Does any body know?

    If you've finished the iMovie project and exported it to other media or file format, then yes, you can delete the files from iPhoto.
    If the iMovie project isn't finished you should leave things alone.

  • Is it possible to undo the Ken Burns effect on all photos at once in iMovie, rather than clicking "crop" and "fit" on each individual photo?

    Is it possible to undo the Ken Burns effect on all photos at once in iMovie, rather than clicking "crop" and "fit" on each individual photo?

    Hey Villiam,  Kevin is referring to setting a movement on a photo setting keyframes (like zoom out to in), right-clicking on Motion, and choose save as preset.  This will put that movement into your presets folder under Effects.  I am going to try this on my next montage and see if I can find some efficiencies.  Thanks Kevin, that was a great tip!!! 
    Also thanks to Jim.  I spent like 30 min looking at all the keyboard shortcuts.  It's a little overwhelming to establish a solid shortcut format that a team of editors can learn and use.  I'm going to be trying the FCP short cuts, then go back to the default.  It looks like the PR default has a lot of existing and helpful shortcuts assigned already.  It's just going to take getting used to a new platform. 
    I'm still looking for tools and/or methods to allow an editor to assemble a 60 second montage with 10 photos, VO and music in 30 minutes.  It's going to be a challenge but I think it's possible with the right innovative process.  I'll still challenge anyone to find a way to quickly assemble a montage in an assembly line or template-based fashion using Adobe Premiere CC where there's on-screen text, advanced transitions, timed to VO, etc. 
    I think I'm dreaming for a tool to automatically do this within Premiere, while I think the answer for now might just be customizing motion presets and creating a favorites folder of transitions that can be dragged onto each clip.  I'll see if there’s a way to apply a set of transitions or motion presets to a series of photos on the timeline opposed to doing it one by one.  I can see this solution being important as video montages are becoming more popular in our industry, and the faster we can make them using a professional software package like Premiere the more prosperous we will be. 

Maybe you are looking for