Photo Elements 11 fails to load and rolls back when it starts 'installing shared services'

Photoshop Elements 11 fails to load and rolls back as soon as it switches to 'installing shared services'. How can I overcome this? Premier Elements is already loaded and works fine including the Organiser. Photo Elements 10 is still on the system and also works fine.
System - Windows 7 OS1

Hello
I have tried that previously, it didn’t work then and it doesn’t now.
What I have just done is run the installation until it came up with the error message and killed the set-up file & windows installer. Photoshop elements seems to be almost installed. Organiser works for both Premier & Photoshop. What files etc would have been loaded from the point of the error message? The installation worked on a borrowed laptop (on 30 day trial). Hopefully all I need to do is copy the missing files across if you could advise what they are.
Regards
Bryan

Similar Messages

Roll back when trying to install iTunes with the version higher than 10.5

I insall successfully with the iTunes with the version under 10.5. But my iPhone is not supported with those version. So I tried the new versions that are higher than 10.5 but a problem occurred during the installation.
"An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="Win32",version=8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86"'
Please refer to Help ans Support for more information. HRESULT:0x800736FD."
When I click OK, it rolls back. Then it started to run the rest apps of iTunes.
Anyone can help me, please!
Thank in advance!

Maybe no one can help!

A required application library failed to load and the product cannot continue

Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
If there is anyone out there that has figured out a way to fix this issue please fill me in.
This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
Anyone have any ideas????
See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
I am working on
Adobe Photoshop Version: 9.0.2 (9.0.2x296)
Operating System: Windows XP
Version: 5.1 Service Pack 2
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
Physical processor count: 1
Processor speed: 2798 MHz
Built-in memory: 2559 MB
Free memory: 1812 MB
Memory available to Photoshop: 1758 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy)
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS2\
Temporary file path: C:\DOCUME~1\JIMSHE~1\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 128.0G, 65.5G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS2\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
ADM 3.10x21
ASDStrm 1.03x2
Accented Edges 9.0
Angled Strokes 9.0
Average 9.0 (9.0x196)
BMP 9.0 (9.0x196)
Bas Relief 9.0
Camera Raw 3.7
Chalk & Charcoal 9.0
Charcoal 9.0
Chrome 9.0
Cineon 9.0 (9.0x196)
Clouds 9.0 (9.0x196)
Color Halftone 9.0 (9.0x196)
Colored Pencil 9.0
CompuServe GIF 9.0 (9.0x196)
Conditional Mode Change 9.0 (9.0x196)
Contact Sheet II 9.0 (9.0x196)
Conté Crayon 9.0
Craquelure 9.0
Crop and Straighten Photos 9.0 (9.0x196)
Crop and Straighten Photos Filter 9.0 (9.0x196)
Crosshatch 9.0
Crystallize 9.0 (9.0x196)
Cutout 9.0
Dark Strokes 9.0
De-Interlace 9.0 (9.0x196)
Difference Clouds 9.0 (9.0x196)
Diffuse Glow 9.0
Displace 9.0 (9.0x196)
Dry Brush 9.0
Embed Watermark 1.70.19
Export Transparent Image 9.0 (9.0x196)
Extract 9.0 (9.0x196)
Extrude 9.0 (9.0x196)
FastCore Routines 9.0 (9.0x196)
Fibers 9.0 (9.0x196)
Film Grain 9.0
Filmstrip 9.0 (9.0x196)
Filter Gallery 9.0
Fit Image 9.0 (9.0x196)
Fresco 9.0
Generic EPS 9.0
Glass 9.0
Glowing Edges 9.0
Grain 9.0
Graphic Pen 9.0
HDRMergeAlign 9.0x001
HDRMergeUI 9.0x001
Halftone Pattern 9.0
Ink Outlines 9.0
Lens Blur 9.0
Lens Correction 9.0
Lens Flare 9.0 (9.0x196)
Lighting Effects 9.0 (9.0x196)
Liquify 9.0
MMXCore Routines 9.0.1 (9.0.1x289)
Merge to HDR 1.0x001
Mezzotint 9.0 (9.0x196)
Mosaic Tiles 9.0
Multiprocessor Support 9.0 (9.0x196)
NTSC Colors 9.0 (9.0x196)
Neon Glow 9.0
Note Paper 9.0
Ocean Ripple 9.0
OpenEXR 9.0 (9.0x196)
PCX 9.0 (9.0x196)
PNG 9.0 (9.0x196)
PNG Icons 1.22x1
Paint Daubs 9.0
Palette Knife 9.0
Patchwork 9.0
Paths to Illustrator 9.0 (9.0x196)
Pattern Maker 9.0 (9.0x196)
Photo CD 9.0 (9.0x196)
Photocopy 9.0
Photomerge 9.0 (9.0x196)
PhotomergeCylmap 9.0 (9.0x196)
PhotomergeRender 9.0 (9.0x196)
PhotomergeUI 9.0 (9.0x196)
Picture Package 9.0 (9.0x196)
Picture

John,
foud your message very helpfull. I experience the same problem when strating a CS2 program (Photoshop, Indesign,...) over a terminal server connection.
It's weird because starting more than one instance is possible (despite what's written in the article ) as long as the users have administrative rights. I've encountererd this problem because my daughter of 11 wants to use Photoshop now. I have a terminal server set up so the kids may experiment with their own desktops whithout the risk to screw it up and because I can access all my programs from wherever I want.
But as I found out now I must buy volume licensing instead of retail (even if it's for just one instance...)
Want to know if possible how "difficult" it was to change your retail to a volume licensed version? Did you have to pay the full amount again? Hope an upgrade exist from Creative Suite CS2 - retail to Creative suite CS3 - volume licensed for the same price as from retail to retail... Or am I hoping to much?
Kind regards and thanks for your info,
Patrick

PSE 9 install fails during Shared Technologies and rolls back

I've bought and am getting fed up with trying and failing to install PSE9.
It fails during the install of 'Shared Technologies and rolls back.
I've unpacked the logs as per instructions and the error messages at the end are:
- 0 fatal error(s), 5 error(s), 3 warning(s)
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: The following payload errors were found during install:
ERROR: - Elements Camera Raw: Install failed
ERROR: - AdobeHelp: Install failed
ERROR: - ElementsSTIInstaller: Install failed
ERROR: - Adobe ExtendScript Toolkit CS5: Install failed
I've looked through the forums for possible causes:
1) Adobe Bridge process running in background - according to task manager, the only Adobe process running relates to Flash
2) Path problems - I've moved the install files and re-extracted them to a folder in C: with the same results.
I then tried installing the loganalyser but that failed as well!
I have attached the compressed log file.
I am riunning Win 7 Home Premium (x64)
Help please!
Steve

See if any of the solutions here help:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

Airport fails to load and even to be reconfigured via wifi

airport fails to load and even to be reconfigured via wifi

Hi All,
Thanks for your responses.
I configured the SQL agent service to use my domain account with which I have no porblems accessing the folder. However the issue persisted.
Thanks,
Andrei
SSIS question

HT4859 How do I retrieve my photos from the cloud after a reset. My photos are gone from my phone, and I backed them up on iCloud?

How do I retrieve my photos from the cloud after a reset. My photos are gone from my phone, and I backed them up on iCloud? when I restored it, no camera roll pictures?

Try restoring the backup again. Sometimes it's successful the second time. You could also try restoring an older backup. iCloud will have your last 3 backups is you have sufficient storage space in your account.

Due to Photoshop Elements 12 Organizer I uninstalled the program. When I re-installed Photoshop Elements 12 on the same computer the "Photoshop Elements 12.0.exe" file is not available. I have tried loading Photoshop Elements 12 from the Adobe web site

Due to Photoshop Elements 12 Organizer I uninstalled the program. When I re-installed Photoshop Elements 12 on the same computer the "Photoshop Elements 12.0.exe" file is not available. I have tried loading Photoshop Elements 12 from the Adobe web site without success.

The Elements 12 shortcut can't find the Elements12.0.exe file so the program will not load. I can load the editor from its .exe file but not the organizer.

Differences between Commit work, Logical Unit of Work and Roll back work

Hi all,
Can any one explain me in details what is the difference between Commit Work, Logical Unit of Work and Roll back work. Pls explain by providing some example.
and also explain me where and when these are used and what are the importance of using these.
Thanks in advance.
Regards
Ramana Prasad.T

Hi Ramana Prasad,
A Logical Unit of Work (LUW or database transaction) is an inseparable sequence of database operations which must be executed either in its entirety or not at all. For the database system, it thus constitutes a unit.
LUWs help to guarantee database integrity. When an LUW has been successfully concluded, the database is once again in a correct state. If, however, an error occurs within an LUW, all database changes made since the beginning of the LUW are canceled and the database is then in the same state as before the LUW started.
An LUW begins
o each time you start a transaction
o when the database changes of the previous LUW have been confirmed (database
commit) or
o when the database changes of the previous LUW have been cancelled (database rollback)
An LUW ends
o when the database changes have been confirmed (database commit) or
o when the database changes have been canceled (database rollback)
COMMIT WORK.
Executes a database commit and thus closes a logical processing unit or Logical Unit of Work ( LUW ) (see also Transaction processing ). This means that
all database changes are made irrevocable and cannot be reversed with ROLLBACK WORK and
all database locks are released.
COMMIT WORK also
calls the subroutines specified by PERFORM ... ON COMMIT * executes asynchronously any update requests (see CALL FUNCTION ... IN UPDATE TASK ) specified in these subroutines or started just before,
processes the function modules specified in CALL FUNCTION ... IN BACKGROUND TASK ,
cancels all existing locks (see SAP locking concept ) if no update requests exist,
closes all open database cursors (see OPEN CURSOR ) and
resets the time slice counter to 0.
COMMIT WORK belongs to the Open SQL command set.
Return code value
The SY-SUBRC is set to 0.
ROLLBACK WORK.
Closes a logical processing unit by reversing all database changes made since the last COMMIT .
You use this statement if you cannot be certain that all the database changes have been executed correctly.
The update routines are not performed.
ROLLBACK WORK belongs to the Open SQL command set.
Note
If the ROLLBACK statement occurs within a SELECT loop, the processing cannot continue because the database cursor is invalid. After the ROLLBACK statement, you should therefore ensure that all SELECT processing has been explicitly terminated.
<b>Plz. Avoid Duplicate Threads.</b>
Hope this resolves your query.
Reward all the helpful answers.
Regards

The install wizard stops and "rolls Back" the install and just gives the attached notice of the install error...how can this be corrected?

The install wizard stops and "rolls Back" the install and just gives the attached notice of the install error...how can this be corrected?
The notice is inserted first and the stopping point is second.

Da ich gar kein Englisch kann kann ich auch nicht sagen was sie mir
geschrieben haben ich kann nur Vermuten was das sein soll es tut mir leid
aber ich kann ihnen keine Konkreter Antwort geben alle Sprechen Englisch
nur ich nicht mehr kann ich dazu nicht sagen
Constantin Preda
2015-02-12 21:45 GMT+01:00 Claudio González <[email protected]>:
The install wizard stops and "rolls Back" the install and just gives
the attached notice of the install error...how can this be corrected?
created by Claudio González
<https://forums.adobe.com/people/Claudio+Gonz%C3%A1lez> in Adobe Reader
- View the full discussion
<https://forums.adobe.com/message/7189357#7189357>

ORA-06519: active autonomous transaction detected and rolled back

I am getting this error. when i am doing insert from my package Any solution to reslove this issue
ORA-06519: active autonomous transaction detected and rolled back . thanks
I am doing select - insert...

Also, if you have any exception handler sections in the code,
then you have to add a commit or rollback statement for
every exception that is handled.

Windows 10 upgrade and roll back limits?

Is there a limit on the number of times you can do the Windows 10 upgrade and roll back to 8.1? I would like to do the upgrade on my Thinkpad Yoga 14 but am concerned about the issues noted on here. I don't want to make too many attempts and lock myself out of the upgrade. I think I did see on here where someone tried 6 times. Thanks,Sue

So I'm in the same boat. My HP desktop that came insatlled with WIn 8.1 64-bit and it "upgraded" to WIn10 badly. WIn10 wont activate becasue it says my license code is blocked on the server, none of my installed apps or data came over and the receovey option will now only recover to WIn10, I have no option to go back to Win 8.1, thouhgh a windows.old dir is there on the C: drive. I have my Win 8.1 license code from before the "upgrade" attepmt, but there is no way with what WIn 10 left me with to revert back to Win 8.1. I went to the HP suppprt & downloads page to see if thre was WIn8.1 recovery media available as discussed here : http://support.hp.com/us-en/document/bph07143#AbT2 , but nothing shows up for my HP Pavilion 500-210qe CTO. Looks like both MS and HP got me good.

Commit work and roll back with simple language and simple example

hi guru
commit work and roll back with simple language and simple example

Hi,
The statement COMMIT WORK completes the current SAP LUW and opens a new one, storing all change requests for the current SAP LUW in the process. In this case, COMMIT WORK performs the following actions:
It executes all subroutines registered using PERFORM ON COMMIT.
The sequence is based on the order of registration or according to the priority specified using the LEVEL addition. Execution of the following statements is not permitted in a subroutine of this type:
PERFORM ... ON COMMIT|ROLLBACK
COMMIT WORK
ROLLBACK WORK
The statement CALL FUNCTION ... IN UPDATE TASK can be executed.
ROLL BACK:
The statement ROLLBACK WORK closes the current SAP-LUW and opens a new one. In doing so, all change requests of the current SAP-LUW are canceled. To do this, ROLLBACK WORK carries out the following actions:
1) Executes all subprograms registered with PERFORM ON ROLLBACK.
2) Deletes all subprograms registered with PERFORM ON COMMIT.
3) Raises an internal exception in the Object Services that makes sure that the attributes of persistent objects are initialised.
4) Deletes all update function modules registered with CALL FUNCTION ...IN UPDATE TASK from the VBLOG database table and deletes all transactional remote Function Calls registered with CALL FUNCTION ... IN BACKGROUND TASK from database tables ARFCSSTATE and ARFCSDATA.
5) Removal of all SAP locks set in the current program in which the formal parameter _SCOPE of the lock function module was set to the value 2.
6) Triggers a database rollback, which also ends the current database-LUW.

I have tried to update from Leopard to Snow Leopard using disk. New OS wouldn't load and now laptop won't start at all

I have tried to update from Leopard to Snow Leopard using disk. New OS wouldn't load and now laptop won't start at all. Simply get the Apple logo and the clock below and then after about 10 mins the laptop switched itself off. The Snow Leopard disk is a brand new family edition. Error message when attempting to install was that "this software cannot be installed on this disk".

Thanks Fred, but I've tried '''ALL''' that already.
I '''THINK''' I might have found the problem - the Profiles folder has been locked by inherited properties from the levels above. I have had to go all the way up to my User folder and reset ALL the properties from there down to be unlocked so that I could remove the prefs.js file so that it could be recreated on the next launch of FF. Exactly why my User folder is locked in such a way as to stop me/FF making changes when I have been able to alter preferences at will in the past, I don't know ...
So far, so good. I have since done a complete shutdown and when I restarted this morning, FF seems to be behaving itself ...
flashfletch

I need to reformat my computer and I will loose my itunes, How do I go about getting all my apps free and paid back when I reinstall everything (Please someone help)

I need to reformat my computer and I will loose my itunes, How do I go about getting all my apps free and paid back when I reinstall everything (Please someone help)

Have you failed to backup your computer?
If so, then you will have to redownload.
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Dear Mr./Mrs., I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I

Dear Mr./Mrs.,
I had an iPhone 4 , then I bought iPhone 5s , I faced a problem when I started installing any new application other than I already had on my iCloud , I was asked to enter my password of my apple account and I entered it correctly , then I was asked to answer two questions , but I forgot the answers !! I click on forgot the answers , they send me check your email , I check my email and they send me the password that I have already entered not the answers of the questions ! How can this problem be solved ?! Hope to take my message into consideration.
Yours sincerely,
                         Hesham.

Welcome to the user to User Technical Support Forum provided by Apple.
For your issue...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
          Ask to speak with the Account Security Team...
     Or Email Here > Apple Support iTunes Store Contact

Photo Elements 11 fails to load and rolls back when it starts 'installing shared services'

Similar Messages

Maybe you are looking for