Photo enlargement when burning iMovie to iDVD

I am currently making a slide show on iMovie. 40 to 50 photos. After burning to DVD there is ONE photo that enlarges out of space. It is the same photo every time. I have tried Ken Burns ON, Off and Fixed. It plays fine on the computer but when I play it on DVD with TV this same photo keeps enlarging completely out of the photo space. All photo were taken with same camera, go figure. I have "Shared" iMovie to Desktop and then drag and drop in idvd. I have also burned from iMove to iDVD and still this ONE photo will not transfer correctly. Even tried scanning to iPhoto JPEG and still it won't work. And tried scanning the business card to iPhoto to JPEG. Anybody got any ideas. This is driving me up the wall.

I find that using Share>Media Browser and selecting the HD 720p option works well with iDVD. I haven't tested this recently (so it may have improved), but the option to Share to iDVD appears to produce inferior results compared to the Media Browser option. Others here have reported this also. Bear in mind though that I'm using interlaced imports - AVCHD, either as Full (1920 x 1080) or Large (960 x 540).
The Media Browser option produces an H.264 file, either in an .m4v container or a .mov container, depending on the size. The Share to iDVD method, however, produces an Apple Intermediate Codec file (AIC) - at least the last time I checked. Perhaps iDVD doesn't handle AIC as efficiently as H.264.
You can access the shared movie in iDVD's Media>Movies panel. Just drag it from there into the iDVD theme background.
I'm not sure that I've addressed all the points in your post Guy, but I hope this helps in some way.
John

Similar Messages

  • Audio distortion when sharing iMovie to IDVD

    When I burn an iMovie in iDVD the resulting audio on the DVD is distorted. The audio in iMovie is just great. What am I doing wrong?

    Hi Bob,
    Welcome to iDVD Discussions.
    Did you import 16-bit audio from your camcorder?
    http://docs.info.apple.com/article.html?artnum=165285

  • Failed to burn iMovie project, iDVD  "not responding"

    A preemptive thanks for your time.
    I am trying to burn iMovie projects through iDVD. I have done this successfully in the past. What happens now is after going through many of the steps up through Encoding Video, the process gets stuck when the status window says "Encoding Audio". No error message occurs or anything like that, the burn wheel stops spinning, and the "multicolored wheel of computer confusion" pops up. Needless to say this means that I am even more confused than the computer and examining the iDVD icon in the dock reveals that it is "not responding."
    This same problem happens with two similar projects (one of which was burned successfully in the past.) I am using Sony DVD-R disks. The projects are the typical size for about 50 minutes of edited iMovie project (15GB).
    HELP!

    As Rich says:
    This question is frequently asked!
    iDVD is probably not 'hanging'. Disregard any messages that iDVD is not responding. It is. Do not force quit.
    Encoding audio is the slowest part of rendering, and can take many hours. Great patience, even an intermittent alternative hobby, is called for.
    Make sure no other application is running, make sure you have not set the hard disk to go to sleep and that the screen saver will not come on. Leave it overnight, or have a 36 hole game of golf.
    Sooner or later iDVD will finish!
    (The current record mentioned here for encoding a DVD with lots of added audio etc is 47 hours!)

  • Burning imovie to Idvd drop out

    I am burning my imovie to dvd but it is quitting each time during audio encoding. What can I do please?

    How are you getting the movie from iMovie to iDVD?  What version of iMovie are you using?  If you're using the Share ➙ iDVD menu option (older versions of iMovie) change that to the Share ➙ Media Browser menu option and add the movie to iDVD via the Media Browser in iDVD.
    As for the encoding error see Bengt Wärleby's post in this topic for possible causes and solutions: Multiplexing Error
    Then follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process.
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

  • Blurry photos when burning via magic idvd

    Ok, so I construct a perfectly focused slideshow in idvd, then burn to a dvd and presto,all photos blurry whether viewed on my iMac that produced it or thru a dvd player on TV.
    the photos are in jpeg format.
    I enhance each photo ( sharpness etc) and when played back in preview mode on my mac are fine.
    What am I doing wrong? I thought Magic iDVD was supposed to remove the hassles,not create them!

    I've not used the Magic iDVD option so don't know what it does with the photos you provide it but have create many, many iDVD slideshow projects with photos from iPhoto and have had extremely good results.
    I create an iDVD project, add a slideshow, move the photos I want (cropped to 4:3 size ratio beforehand) to the slideshow, add music and save the project as a disk image (this separates encoding problems from burning problems). I mount and play the disk image with DVD Player and once I'm satisfied all is well I burn the disk image to disk using Disk Utility or Toast as the slowest burn speed possible using top quality media, Verbatium, Maxell or Taiyo Yuden DVD-R, which are the most recommended in these forums.
    Since I'm not familiar with Magic iDVD tell me a couple of things: are you creating the slideshow in iPhoto or just making the still photos available to iDVD by placing them in an album for export to iDVD?
    If you're creating the slideshow in iPhoto and use the Ken Burns effect the image size should be a minimum of 1440 x 1080 pixels in size to help keep the image sharp during the zooming of the KB effect. The output resolution of DVDs is 720 x 540 - a DVD standard and not iDVD issue. The slideshow is converted to a Quicktime movie format for use in iDVD. Then iDVD encodes the QT file again in its process. That's a lot of compression from the original source files.
    For what it's worth here are some tips for preparing photos for use in iDVD that might help:
    http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6675.html
    http://www.scantips.com/basics1f.html
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

  • Audio out of place when transferring iMovie to iDVD

    I've made a movie in iMovie 09 that runs just how I want it to in iMovie. However when I transfer it (via sharing with the media browser) to iDVD and preview it (or watch the film on a burnt DVD) towards the end of the movie the audio from the final 6 or 7 clips is played about 45 seconds before the clips themselves occur. The audio also then plays (correctly) with the clip. I have tried detaching the audio from these clips, as some forums seem to suggest but it still turns up in the incorrect place (before the clips themselves). I have tried deleting and reintroducing the offending clips but am wondering if I could have somehow copied and placed the audio to these clips at the wrong place on the project timeline - and for some reason can't see it?
    It's a 23 minute movie that is now ruined by out of place audio right at the end so any help much appreciated.
    I'm using: iMovie '09 version 8.0.6 and iDVD 7.1.2 on a Macbook Pro 2.4GHz Intel Core i5, OSX version 10.9.4
    Thanks

    Are you able to exert the movie to the Desktop and play it with Quicktime Player with all audio OK? What format are the audio clips. Some report best results with AIFF. 
    iDVD has a bug that if any of the video media is edited after having been added to the project the resulting DVD is compromised.  Therefore try creating a new project entirely.
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process.
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

  • Skipped audio files when burning disc in iDVD.

    I burned a DVD using iDVD version 7.0. The audio files sound perfect on the computer but on the disc there are skipped areas noted in three different audio files. I did try different discs and burned discs on both my laptop and my desktop. I have used this program before but never encountered this problem.  Any tips? Thanks

    Hi
    My notes on this.
    No audio on DVD disc.
    Most common origin. 
    1. Imported audio from iTunes.
    • In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
    • Use this in Your movie project
    2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
    Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
    (iM’08 & 09)
    3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
    large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
    Minuscular - - 176x144
    Mobile - - - - - 480x360
    Medium - - - - 640x480
    Large - - - - - - 720x540    960x540
    HD - - - - - - - - 1280x720
    4. Strange audio formats like .mp3, .avi etc.
    • Change them to .aiff. Use an audio editor like Audacity (free)
    5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
    Cheque Audio-Out resp. Audio-In
    6. Ed Hanna
    Had the same problem; some Googling around gave me a kludgy, but effective fix
    Downgrade Perian from recent versions back to version 1.0.
    That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
    7. GarageBand fix.
    In this set audio to 44.1 kHz (Klaus1 suggestion)
    (if this don’t work try 48 kHz - me guessing)
    Before burning the DVD.
    • Do a DiskImage (File menu and down)
    • Double click on the .img file
    • Test it with Apple DVD-player
    If it’s OK then make Your DVD.
    Burn at x1 speed.... (or x4)
    • In iDVD 08 - or - 09
    • Burn from DiskImage with Apple’s Disk Utilities application
    • OR burn with Roxio Toast™ if You got it
    Yours Bengt W

  • Can't burn imovie with idvd & can't keep the audio and video clips to ancho

    Two questions:
    I've been working on a series of short digital stories in iMovie and have been trying to put them on a dvd. Using iDVD wasn't successful. Couldn't get them loaded into the map on the DVD theme page. So I dragged finally gave up and dragged the iMovie filesinto the DVD icon on my desktop and burned them. But now I have to drag the iMovie file from the DVD onto the harddrive before I play them.
    I would like to have all of the short movies in one DVD.
    I would also like to have one longer iMovie file but I'm having a devil of a time making all of the files, audio, video, photo, etc. stay in place while I'm working on each section. Perhaps this isn't feasible?
    With thanks for any help you can give me. I'm a novice at this program but enjoying the challenge.
    I'm using a borrowed machine...2 GHz G5 with 2 GB DDR SDDRAM
    Powerbook G4   Mac OS X (10.4)  

    I've been working on a series of short digital stories in iMovie and have been trying to put them on a dvd. Using iDVD wasn't successful. Couldn't get them loaded into the map on the DVD theme page. So I dragged finally gave up and dragged the iMovie filesinto the DVD icon on my desktop and burned them. But now I have to drag the iMovie file from the DVD onto the harddrive before I play them.
    Were you dragging the project file into the right place? Try a simple theme like the Portfolio Colour theme under the iDVD3 collection. By the way, the simple thing first, I hope you were using iDVD5 not iDVD4.
    There can also be problems if the iMovie projects were created in iMovie4 and converted to iMovieHD. If this is the case load each one again. Make some simple change, undo if you wish, then save again.
    In any case try using file > Import and note what happens. I think this (old fashioned) way is easier than gragging in the projects. You can tidy them up later.

  • Can't burn iMovie to iDVD (not responding) - after "Encoding Audio"

    Hello,
    I have a similar post in the iDVD board, but thought someone in this section may be able to help as well.
    I have a 15 minutes project (almost 2 GB) iMovie show that I've attempted to burn to DVD through iDVD (4 times with the same problem)...
    It goes through the "encoding menus" and videos, but gets stuck on "Encoding Audio" and in my Force Quit window says (Not Responding). I have almost 12 GB free on my PowerBook G4 and successfully burned a test DVD of this last week before completion (when I only had 7 free GB - I also added on another 2 minutes since then)...
    Any help or ideas? I need to get this done ASAP...
    Thanks
    Chris

    Chris, what I've found is that patience is the key here. You really can't count on the progress bar to let you know how far along in the process you are. I've run into the same problem as you. When the burn symbol stops spinning and you get the beachball/lollipop don't rush right off to force quit. Just because the force quit menu shows that iDVD is NOT RESPONDING does not mean that all is lost. What made me realize that iDVD was still working was the Activity Monitor located in your Utilities folder under applications (applications/utilities/activity monitor).
    Do yourself a favor and run this app while burning you project. When you get to the point where it appears to hang on you check the status of iDVD in the activity monitor window. More than likely it will show that iDVD is still using a good % of your CPU (%CPU column numbers will constantly change as iDVD demands more or less from your processor). You may also notice that it may show that iDVD is not responding (as well as a couple other processes that are related to the prog), this doesn't mean a thing because iDVD is in reality still chugging along. Of course if the %CPU column is showing 0.00 then iDVD has indeed stopped workin in which case you do have some issues.
    Hope this helps

  • Error message when burning HD with iDVD

    When i try to burn a HD movie directly from iMovieHD( v. 5,02) with iDVD( v. 5.0.1), i get an error message code OX8002006D, followed by another:
    "Burning Finished.---errors were found during burning process."
    and "there was a problem during multiplexing/burning"
    and the disk is ejected blank.
    With a Standard Definition movie, using the same DVD-R or DVD+R disks(4X) and same procedure, i have no problem. The movie was only about 2 minutes long with about 19 GB available.
    Anybody out there who knows what's wrong?
    Hans

    There are a bunch of folders within your home folder, you may want to decide what exactly you want to back up or not.
    Besides your personal folders (Desktop, Documents, Movies, Music, Pictures), you may want to decide whether you need to back up the library folder. The library folder generally contains preferences for most of your applications, and also caches and applications support files. These can become really big in some cases (Mine is more than 8GB, will not fit on a dual layer DVD). And the Library>Caches folder contains temporary files that will change from time to time, this might be the cause of your previous error since the shortcut is no longer valid.
    Once you chose your files and make sure they will fit on your blank CD/DVD, you can just do what you did before, drag the folders to a Burn folder, make sure you are not running any other apps, so they won't be modifying the files.
    There are programs you can use to backup to CD/DVD, Disc burner like Toast will span across several discs if the data does not fit on one. For a more automated solution, Carbon Copy Cloner (http://www.bombich.com/software/ccc.html) can backup to disc images which you can then burn to discs. I personally don't know a lot backup programs that provide good support for CD/DVDs, so I'll leave this to other folks.
    If you are going to backup regularly, I would recommend spending some money on an external drive. You can find quite a few free software for automated backup and saves money and time on burning CD/DVDs. Plus you have the advantage of being able to boot from the external drive should anything bad happened to your internal one.

  • Burnning iMovie with iDVD on 4 gig CD

    I have been creating an iMovie and I burned it by using iMovie buttons. The iDVD opened and processed (burned) the iMovie but at the very end it stopped and reported an “erro” another time it just crashed, ejecting the CD. I noticed that the size of the iMovie file was 7 gigs. I have allot of clips (most unused) associated with this movie.
    I am quessing the size of file ( 7 gig) and CD 4 gig capacity is the problem. But I don’t have that much in use in the actual file. Any help appreciated.

    OK - I assume you mean you have DVD media (about 4GB) and NOT CD media (about 700 MB)
    iDVD compresses your source material with mpg-2 compression so the size of your raw source material in GB isn't important. What IS important is the running time of your iMovie project in minutes. A single layer DVD can hold abou 60 minutes in Best Performance mode and 120 minutes in Best Quality mode.
    By way of reference, if you raw source mateial was in DV fomat, 60 minutes of DV format content is about 13GB.
    I doesn't sound like the length of your source material is your problem.

  • IPhoto exaggerated photo size when burning to DVD.

    When trying to burn about 600 photos to a DVD from iPhoto, iPhoto states 2000gbs is needed. After several restarts of both software and computer same issue persists. We even tried to burn just one photo, that stated that 2094.18gbs were needed.. Any ideas what can cause this exagerrated file size issue?

    The issue was resolved on its own after a couple of more tries. Still not sure what caused it, but everything is working properly at the momment.

  • Photos blank when burning DVD

    I am trying to export photos from iPhoto and burn them onto DVD. The process goes fine, but when I reinsert the DVD, the photos all look blank. The keywords are there, and it shows 2272 photos, but they are all blank. Thanks for your help!

    Sure. I'm selecting the photos I want (about 2270, 2.8 GB) and going to Share - Burn disc. I put in a blank DVD - then the whole process goes smoothly. But when I reinsert the DVD, it shows up in iphoto with all 2270 blank photos!

  • HT1583 When burning a DVD of photos and music from iDVD, the photos blur right before the transitions and the music has about 5 second glitches here and there before the music starts again. Is there any way to burn the DVD without this happening?

    Each year I am in charge of making a slideshow of photos and music for my annual company meeting. I always use iDVD to set up my photos and music and then burn the DVD to play at the meeting. Every time I burn the DVD, it blurs right before the transition of the photo. It has always done this and I'm not sure why. It will also make the music glitch in a few spots for about 5 seconds or more. If I burn another DVD to try it again, the glitches will still be there, but in different spots. I've tried the highest quality of DVD's possible and this still happens. What can I do to fix this problem?

    Try disabling transitions altogether!
    There is a technical reason that this breakup happens - it is to do with how slideshows can be saved within the DVD specification, they can either be recorded as 'video streams' or as a collection of 'still images'.
    When you add transitions iDVD has no option but to use a video stream, this can result in terrible 'breakup' because the mpeg 2 encoder isn't designed to handle scenes that are static with a sudden short change. You can see 'artefacts' in the video stream…
    https://en.wikipedia.org/wiki/Compression_artifact
    'Still image slideshows' avoid the issue altogether by only showing a static image, no video compression is used & because the scene doesn't transition so it shouldn't breakup.
    NOTE: Music on the slideshow is irrelevant, both types can use a soundtrack.
    I cannot remember if it is possible to force iDVD to only make still image slideshows, I always use DVD Studio Pro to correctly setup DVD's. I'd suggest you use the option to save the DVD to a disk image & then open that disk image so that DVD Player can preview it, that should save on the number of test disks you burn.
    If you cannot make it avoid using video streams you may be ether off making your own video slideshow in iMovie & then import that into iDVD. It may eventually look better despite being a video stream!
    iDVD isn't really condusive to professional levels of control.

  • I burned my first iDVD andpicture quality is not good.  Originals are excellent.  My photos are shot in raw or jpeg, both are not sharp when I view my DVD.  I viewed it on my 1080 dpi tv and my new apple computer.

    I burned my first iDVD andpicture quality is not good.  Originals are excellent.  My photos are shot in raw or jpeg, both are not sharp when I view my DVD.  I viewed it on my 1080 dpi tv and my new apple computer.

    There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
    If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
    Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
    http://www.lqgraphics.com/software/phototomovie.php
    (Other users here use the alternative FotoMagico:  http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
    Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
    Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie  as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast,  for burning.
    You will be pleasantly surprised at how professional the results can be!
    To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
    http://support.apple.com/kb/HT1089

Maybe you are looking for

  • Solved WiFi issue - Hope it works for you. If not, sorry.

    Hey, I know about your problem. I've been a Windows person for fifteen years and bought a MacBook Pro about eight hours ago and same problem. Been researching it for eight hours and got it to work. I don't know much, but you can try this and maybe it

  • Video out put

    Ok you final cut pro PRO's I have a 30 min project I have done, burn it to DVD looks great, made a copy to mini DV looks great also. Now I need to make a copy to a broadcast BETA tape. The problem when I make the copy I have a small black outline all

  • ALV grid sub-totals

    Hi All,       I have written a code to show sub totals in ALV. But, is there any way by which I can show *Only the sub total lines* and not the individual line items that form the sub total ? e.g.:- KeyField1  KeyField2  Field1  Field2 A             

  • Document Root for JSP...

    Hi,           Is there some way i can have more than one directory as my           DocumentRoot...??           I am trying to save my .jsp files in directory           /weblogic/myserver/public_html/jsp. But i have my root as public_html.           B

  • CME Install question

    HI All, I am trying to install CME  9 on a new 2951 router with firmward 15.2(4)m2 . I was following the installation instructions and it says.. Use the zip program to extract the file to be installed, then: a. If the file is an individual file, use