Photo file issues with iWeb and Aperture....also too much duplicating!!
A little background, before I get into my iWeb issue.....
Years ago I tried iPhoto, but I didn't like how it duplicated all my photo files and I wasn't very fond of the file structure it created. Years later (last month) I got Aperture. Aperture (still has a long way to go) also duplicates all your files and places them in their own file structure. If I can get along with Aperture (and if it will get along with my other programs), I won't mind putting all my files into the file structure it creates. But for now, I still have my original files in the original file structure I have had for many years as a back up.
On to my issue with iWeb and Aperture....
To add photos to iWeb, you can either go into the iWeb media center or you can drag and drop photos from other locations.
1st: iWeb media center
To get my photos into the media center, I would have to load them into iPhoto (iP 6 does allow you to keep your original file structure, but it still creates .jpg files, which fills up your hard-drive. More duplicates I don't need or want). So that is out for me. iP6 will let you view and use your Raw files.
Another way is to drag and drop your file structure directly into the media center window. I don't think this duplicates any files (at least I haven't been able to find any), but it takes an awfully long time to thumbnail all your photos (several hours and still waiting for 22K + files). Also, it won't show any Raw files. Again, out for me.
Aperture won't let you drag and drop its library into the media center at all. So if I was to move all my files into the Aperture Library, I wouldn't be able to access them for iWeb at all.....Out for me.
2nd: Drag and Drop
I was able to drag and drop Raw files directly into iWeb from C1 Pro, Adobe Bridge and Adobe Lightroom.
As I said before, I am trying to move over to Aperture. However, Aperture won't let me drag and drop photos. What is the deal here??? These are both Apple programs and they won't play nice with each other. Very annoying.
Anyway, I put a link below to my iWeb test webpage I made. All the photos were Raw files that I did a drag and drop from C1 Pro, Adobe Bridge and Lightroom. There were no problems with the publishing.
http://web.mac.com/phil_navarro/iWeb/Site%202/Drag%20and%20Drop%20test.html
So, does anyone know if they can get photos from Aperture to work?? Thanks for any responses.
Phil
G5 Desktop Mac OS X (10.4.4)
Jedi,
Perhaps you are right.
I am not a web developer and I will never be. I don't feel like spending countless hours learning how to use Dreamweaver or some other Pro web app. iWeb looked like a way to start making websites of my photos for my friends and family (much easier and better than Home Page on .Mac). All I was asking was for a way to drag and drop my photos (especially Raw files) with Aperture. Which I can do with Lightroom, Adobe Bridge and C1 Pro, and without using iPhoto.
I am not a Pro photographer either, but I purchased Aperture based on what was advertised on the Apple website. From that ad, Aperture fit my photo needs almost to a tee. I am looking to adjust Raw files, Crop, Archive and keep my use of Hard Disk space down to a minimum. I can use Photoshop for the other 5% of things I do. However, Aperture has some issues (if you own it, then you already know. If you don't, you can read the Aperture Forum) This is one of the reasons I never went to iPhoto for archiving. I didn't like the way it duplicated all my files, taking up more disk space and its file structure. So even though Aperture won't play nice with other programs, I was surprised that it wouldn't play nice with any Apple programs.
After reading your post and based on what you are saying, everyone either needs to have/learn/use Pro apps only or have/learn/use iApps only. Don't Cross the Streams!!
I guess that means Apple will need to fix DVD Studio Pro. It uses photos that are in your iPhoto library and music from iTunes (iApps in a Pro app??....for shame...."it was never intended"). Also, DVD SP won't read the Aperture library. Does that mean there are 3 platforms? Pro, iApp and Mediocre??
Now I have 2 questions:
1. Can someone please tell me which apps are Pro and iApp, or if there is Mediocre? I don't want to mix them up and "Cross the Streams".
2. Again....is there anyway to use Aperture with iWeb?
TIA,
Narvon
Similar Messages
-
While I can view my iWeb movies in Firefox, I cannot view my iWeb movies in Safari.
Here's the link: http://web.me.com/digit.al/TabbyCommunion/Movie2.html
Can some one please help me. I can't figure this one out.Both movies play OK for me. You do have them misidentified, however. Try clearing Safari's cache (CommandOptionE) and reload the site.
OT -
I'm working to set up my website with iWeb and it won't let me import photos from iPhoto! Whats up?
Will Image capture (in your applications foldr) see them and bring to disk? If so then once they are safely off the memory card and on disk use the camera's format command to reformat the memory card
and can you impoprted to iPhtoo from disk? Will preview open the photos on disk?
LN -
IWeb and Aperture: any updates since October?
I've shared the difficulties that others have discussed in getting Aperture, iWeb and iPhoto to play nice together.
I use Aperature now because I have so many photos, and I was having to rebuild my iPhoto cache every day (to the tune of 15-30 minutes), plus I want versioning and better organizational stuff, etc. I distinctly remember hearing in the promo material that Aperture was going to be seamless with iWeb, and it was the main reason I decided to take the leap.
I'm wondering if anyone has made any progress of getting these two apps to talk better to each other? And does Aperture automatically update iPhoto with versions? How do you import additional iPhoto images into Aperture without having to re-import the entire library? Any word from Apple?
Thanks,
Kiki on the Big Island
PowerBook G4 Mac OS X (10.4.8)
PowerBook G4 Mac OS X (10.4.8)
PowerBook G4 Mac OS X (10.4.8)Aloha G,
Thanks, and since you asked, here's my usual workflow:
I am a digital painter, which means I use digital photos to provide the pixels that I paint with, using primarily Corel Painter.
I shoot photos and import them into iPhoto for cropping and minor color fixes. I then export the photos to Painter. That means I copy them to the desktop folder that I use to collect all the bits and pieces that will be part of the painting. (That might be a Projects Folder in Aperture).
I then proceed to produce between 5-15 versions of my painting, doing incremental saves. These are full sized files.
When I finish a painting, I export it back to iPhoto as a full sized JPG.
Then I export from iPhoto AGAIN to get a smaller, low-rez file to my project folder on the desktop. I have not figured out how to make a low-rez duplicate in iPhoto without exporting and importing.
I then re-import the smaller file back into iPhoto, and put it in an album with other low-rez paintings, ready to go into iWeb and onto my web site.
I may have to also generate other full size versions to print my paintings in standard sizes -- 5x7, 8x10, etc.
Average file sizes are in the 5-50MB range, though they can get larger.
In my dream world, here's what I'd like:
I'd like to be able to import into a photo handling program. I'd like to edit the photos in Painter directly from iPhoto (which I can do, but iterative save means I save the iterations...where?) Painter complains that Aperture's files are not in a format it can use. I don't see anywhere in Aperture's Preferences to change the way the files are exported for an outside editor.
I'd like the photo program to allow me to do versioning (which Aperture does nicely; iPhoto does not), so I can print whatever sizes I need. I also want the photos to be push-button connected to iWeb because I have already invested a lot of time in creating an iWeb site.
I'd like not to have to create full-size duplicates because of storage issues.
And, now, I have a new problem since the previous post. I currently have Aperture referencing my iPhoto library.
I'm thinking that I will just wait for Aperture to resolve what seem like fairly easy fixes. Meanwhile, I thought I would hand-split my iPhoto library into smaller individual libraries to reduce the cache load. BUT, when I tried to export my iPhotos into smaller libraries, I cannot do it. I cannot drag a photo to the desktop now.
Is that because Aperture is now managing the photos?
Thanks for all your help...
PowerBook G4 Mac OS X (10.4.8) -
IPhone - how to sync with iPhoto and Aperture at the same time ???
I'm having a really hard time with syncing my photos - I'm using iPhoto and Aperture on my Mac. When I launch iTunes and start managing my iPhone, it seems like I should be able to sync photos from a variety of sources all at once (iPhoto, Aperture, other folders).
However, whichever option I select in the photos drop-down becomes the only libraries that are available to sync. What I mean is that if I select some of the Albums in my iPhoto list and sync those, when I later drill down to Aperture and select albums from there and perform a sync - then the previously synced/loaded albums and photos from iPhoto are automatically removed from the iPhone.
Why can't I sync between multiple photo albums / sources at the same time? This is incredibly annoying.Here's how I solved this problem:
In Aperture, select File -> Import -> iPhoto Library
Then under the "Store Files" dropdown, be sure "In their Original Location" is select. This will allow Aperture to see your iPhoto library, but it will be managed by reference rather than phyisically imported.
Now, in iTunes, select Aperture as the application from which you want to synch photos, and select the option to synch specific albums.
You should be able to see the names of albums in iPhoto as well as those created in Aperture. -
Known compatibility issues with 2008 and 2008 R2
For some reason i am not able to make remote connections from VS 2013 to my current installation of SQL server 2008 so i thought to uninstall it and install another edition i got from MSDN but i the uninstall process keeps failing saying theres a known
compatibility issues with 2008 and 2008 R2. it also gave me the option to seek solution online but when i click on it it is unable to get a solution online and i am never able to uninstall it. please help me here. i need to get SQL server up and running. thanksHi FLORENCEOKOSUN,
According to your description, you encounter a compatibility issue when uninstalling SQL Server 2008. For further analysis, please help to post the full error message and
SQL Server summary log. By default, the log can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
There is also a KB article about known issues of installing SQL Server 2008 on Windows Server 2008 R2 for your reference.
https://support.microsoft.com/en-us/kb/955725
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support -
Are there any compatibility issues with Captivate and OS X Yosemite?
Has anyone noted any compatibility issues with Captivate and Yosemite?
I had the same issue. Updating resolved this as well.
I tested with Captivate 7 and almost everything seemed to work fine. I tested with an existing project file containing TEB's, Motion recording, a third party drag 'n drop widget, and a playbar with a TOC. This all seemed to work fine both in preview mode as after publishing. I also tested with Captivate 6 although I didn't publish anything. Here, everything seemed to work fine as well. However this was only SWF.
As jpm226 described for 8, previewing HTML5 doesn't seem to work with Captivate 6 and 7 either. Chrome gives a "This webpage is not available" notification. Publishing however, does seems to work.
Fortunately, the client we work for that asks us to use Captivate 7, also asks for SWF output. So I'll continue to use Yosemite for now. -
How do I delete sites created with iWeb and posted with .mac after a format
I am confused about how to delete a couple of sites that I created with iWeb and posted with my .mac after I did a format reload?
I have tried everything. The original files are not on my MacBook Pro because of the format.
I also see them in my idisc, but I is my understanding that on my MacBook Pro that I can delete the files, but they are hosted online. On the online idisk I cannot delete them because there is no option. Please help!!!Using the file menu in Finder:
Go/iDisk/My iDisk/Web/Sites/iWeb/YourSitesAreHere
Highlight selected files and Command/Delete. You will receive a drop down asking you if you are sure; click OK and the files/sites will be deleted immediately from the iDisk.
Mark -
An issue with authentication and authorization on ISE 1.2
Hi, I'm new to ISE.
I have an issue with authentication and authorization.
I have ISE 1.2 plus patch 6 installed on VMware.
I have built-in Windows XP supplicant and 2960 cisco switch with IOS c2960-lanbasek9-mz.150-2.SE5.bin
On supplicant I use EAP(PEAP) with EAP-MSCHAP v2.
I created authentication and authorization rules with Active Directory as External Identity Source. Also I applied authorization profile with DACL.I login on Windows XP machine under different Active Directory accounts. Everything works fine (authentication, authorization ), but only for several hours. After several hours passed , authentication and authorization stop working . I can see that ISE trying authenticate and authorize users, but ISE always use only one account for authentication and authorization . Even if I login under different accounts ISE continue to use only one last account.
I traied to reboot switch and PC,but it didn’t help. Only rebooting of ISE helps. After ISE rebooting, authentication and authorization start to work properly for several hours.
I don’t understand is it a glitch or I misconfigured ISE or switch, supplicant?
What should I do to resolve this issue?
Switch configuration:
testISE#sh runn
Building configuration...
Current configuration : 7103 bytes
! Last configuration change at 12:20:15Tue Apr 15 2014
! NVRAM config last updated at 10:35:02 Tue Apr 15 2014
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname testISE
boot-start-marker
boot-end-marker
no logging console
logging monitor informational
enable secret 5 ************
enable password ********
username radius-test password 0 ********
username admin privilege 15 secret 5 ******************
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa authorization auth-proxy default group radius
aaa accounting update periodic 5
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
client 172.16.0.90 server-key ********
aaa session-id common
clock timezone 4 0
system mtu routing 1500
authentication mac-move permit
ip dhcp snooping vlan 1,22
ip dhcp snooping
ip domain-name elauloks
ip device tracking probe use-svi
ip device tracking
epm logging
crypto pki trustpoint TP-self-signed-1888913408
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1888913408
revocation-check none
rsakeypair TP-self-signed-1888913408
crypto pki certificate chain TP-self-signed-1888913408
dot1x system-auth-control
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
ip ssh version 2
interface FastEthernet0/5
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/6
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/7
interface Vlan1
ip address 172.16.0.204 255.255.240.0
no ip route-cache
ip default-gateway 172.16.0.1
ip http server
ip http secure-server
ip access-list extended ACL-ALLOW
deny icmp any host 172.16.0.1
permit ip any any
ip radius source-interface Vlan1
logging origin-id ip
logging source-interface Vlan1
logging host 172.16.0.90 transport udp port 20514
snmp-server community public RO
snmp-server community ciscoro RO
snmp-server trap-source Vlan1
snmp-server source-interface informs Vlan1
snmp-server enable traps snmp linkdown linkup
snmp-server enable traps mac-notification change move
snmp-server host 172.16.0.90 ciscoro
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server vsa send accounting
radius-server vsa send authentication
radius server ISE-Alex
address ipv4 172.16.0.90 auth-port 1812 acct-port 1813
automate-tester username radius-test idle-time 15
key ******
ntp server 172.16.0.1
ntp server 172.16.0.5
endYes. Tried that (several times) didn't work. 5 people in my office, all with vers. 6.0.1 couldn't access their gmail accounts. Kept getting error message that username and password invalid. Finally solved the issue by using Microsoft Exchange and "m.google.com" as server and domain and that the trick. Think there is an issue with imap.gmail.com and IOS 6.0.1. I'm sure the 5 of us suddently experiencing this issue aren't the only ones. Apple will figure it out. Thanks.
-
I'm having a lot of issues with firefox and cannot figure out how to get help. It began when I updated to 13. I get all kinds of ad popups, I cannot play one game on FaceBook called Farm Town at all, and I keep getting an AVG popup about cookies that I cannot get rid of. These issues are causing me to use Chrome very often even though I like Fox better. I've searched and searched how to get help and cannot find anything. How does one get personal technical help?? These issues do not happen in Chrome at all. Thanks.
Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
Hello All,
I have an issue with GR and IR. Following is the scenario.
PO is created for 1 PC at 100 USD. Material is having moving avg price.
GR is done for 1 PC at 100 USD.
IR is done for 1 PC at 100 USD.
again IR is done for 1 PC at 40 USD. (Total IR is done for 140 USD)
Now GR is reversed at 122 movement type for 1 PC.. Amount reversed is 70 USD.. [(100+40)/2]
IR is done (credit memo) for 1 PC at 100 USD.
again IR is done (credit memo) for 1 PC at 40 USD. (price changed manually in MIRO)
So now open GR Qty is 1 PC for 70 USD.
Please suggest how to balance the GR ie how to make zero Stock.
Also let me know where to make a check so that IR is not done beyond the Stock maintained in PO.? How to corrrece the program?
Thanks in advance
Forum ShahHi,
First Let me make you clear, that system nothing to do MAP of material it fetch Material Price With PO for GR and even for reversal for GR.
If you have GR Based IV and you have done GR for I PC then you can only do the IR for One Piece.
For Other 1 PC with 40 USD
There may be possibility that for next in T Code MIRO, you may be doing Subsiquent Debit/ Credit in which system only for value not qty.
Because IR has nothing to do with Qty, system will distribute value to qty as per stock available or Price Type.
and if you have done 122 for that material, then system will ask for material number or delivery note.
Then system will only reverse the GR Qty.
please check the logs of the t codes done.
Hope Help U !
Regards,
Pardeep Malik -
Uk date format issue with ASP and Access Database
I have an Asp form which updates records in an Access
database. Problem is
that the date format in the database record is dd/mm/yyyy
(UK), when
the record is displayed on the form it is mm/dd/yyyy(US)
which after I
update the record in the database the date has changed to the
new format.
I have tried everything I can to change the format but to no
avail...anyone any ideas how I can resolve this issue?
Thanks
Stevestevo.s wrote:
> Hi
>
> I have tried changing the format on the date field on
the server behaviours
> panelto ddmmyyy. Also have tried to set the form field
format to ddmmyy. I have
> also tried to use a function I got from a posting
somehwere on the net to no
> avail. <%function ddmmyyyy(varDate)
> ddmmyyyy = Day(DateValue(varDate)) & "/" &
Month(DateValue(varDate))
> & "/" & Year(DateValue(varDate))
> end function
>
> I believe that this is a recognised issue with
Dreamweaver and Access but
> can't seem to grasp the work around! Problem being I am
teaching myself through
> books and internet articles and can be weeks at a time
without being able to
> look at the issue..each time I come back to it it is
like starting all over
> again! I was hoping that somewhere out there there is a
simple solution the
> issue perhaps a date picker with the built in
functionality to address the
> issue...I am keen to understand how to deal with the
issue rather than just
> change my database date field to fudge the problem as I
am in the UK and when I
> eventually start to use the application I would like
there to be some
> consistency with dates and that users are familiar with
the format.
>
> Any help gratefully received!
Its not Dreamweaver, or Access, its your servers locale, its
set to US
format, not the UK.
On your page at the top use:
<% Session.LCID = 2057 %>
This will force the page into using UK formatted dates. Use
it on any
page that needs to format the page correctly.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html -
All Experts,
Have some issue with USD and CAD currency with PS and SD
We are using a group currency in the controlling area (type 30 set as USD). In addition we have object currency turned on for the Controlling Area so we have company currency in parallel for each company assigned to the controlling area. Within CO everything is working fine, the issue appears to be when the CO-PS planned amount is passed to the sales order EK01 condition. In this case, CO-PS has both object currency and controlling area currency but it uses the controlling area currency as the amount passed to the sales order.
Any Help?Hi Kishore.,
Please go throgh this Please check this links perhaps they may help.
http://help.sap.com/bp_imcv1500/IMC_US/HTML/preconfigured_scenarios.htm
ETO:
http://help.sap.com/bp_imcv1500/IMC_DE/HTML/E83_EN_DE.htm
http://help.sap.com/bp_bblibrary/500/HTML/E46_EN_DE.htm
MTO:
http://help.sap.com/bp_bblibrary/500/HTML/V66_BB_EN_US.htm
http://help.sap.com/bp_imcv1500/IMC_DE/HTML/E70_MTOQuotProc_EN_DE.htm
PS - SD integration are on
1.Billing pan, at each WBS element, network and Activity level.
2. DIP profile which is assigend to item category. DIP for resource related quotation works only with ECP ( easy cost planning).
3.sales pricing - generally, there r 2 types of sales pricing in PS . lumpsum contract and unit rate contract.
4. BOS - bill of Services. which has to be activated. It is industry specific solution. If BOS is activated you also have integration for vendor RFQ and Analysis.
5. resource related Billing
REWARD if helpfull
Thanks & Regards
Narayana -
Any issues with PE7 and Windows 7?
Hi All,
I am considering purchasing a second computer. I have had great success with PE7 and Vista, But I can't get Vista on the new Alienware I want to buy. So, has anyone had any issues with PE7 and Windows 7? I have read many posts where there are issues with PE8 and Windows7.
Thanks, StanIt's a toshiba laptop.
4 gig DDR3
core duo
320 hard drive - partitioned
I also use a dual screen - 22" lcd monitor
I don't use it a lot, since I have a desktop. I've noticed having a
dedicated video card makes a world of difference in editing. This might be
your problem; a dedicated high end video card is the way to go.
If I do simple compilations I don't have any problems. I usaully am making
a DVD of soccer games. If there is a lot of special effects I'll use my
desktop that has XP. -
Is there a compatability issue with Firefox and Andriod operating system 2.2.3? I can't get Firefox to work. I have tried uninstalling it and it won't download. in English
Hi Drbobdog, there shouldn't be a compatibility with Android OS 2.2.3. There may be a compatability with the device itself.
Here are the system requirements:
https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements
(also seen here as well : http://www.mozilla.org/en-US/mobile/platforms/ )
I hope this helps.
Maybe you are looking for
-
Flash Builder 4.6 differences between debug version and apk release version
I've been struggling for several days now. I have a simple swf file that just says 'hello world' on a green background. It is written in Flash 8 actionscript 2. I've used the Flash Builder actionscript mobile project and flex mobile project in both
-
When syncing my iphone all of the pictures on my computer are saved onto the phone as "Camera Albums" . As they are taking up too much space I want to delete them from the phone but don't see how to do this. Also, how do I prevent the pictures from
-
Hello, My documents are sometimes not saved when I reopen them. This happenend to me about 7 times in the last 2 months, since I work with CC, on my new iMac. never happened to me in the last 8 years. Please, inform me about the problem and the solut
-
Consideration in a new Production Environment DB
Dear all, DB : 10.2.0.4.0 Solaris 10 After installing Oracle DB in a production environment, is there any jobs to be scheduled for proper performance of the DB ? What has to be considered in db health regard?. Please guide ? Kai
-
SMTP test to Exchange 2013 failing
I have an Exchange 2013 server set up for testing which I am trying to have the internal servers relay off of to EarthLink (My ISP). The Receive Connector is set up as a FrontEnd Transport, Anonymous and Externally Secured authentication. It accepts