Photo Filter adjustment layer and eye dropper

Hi all
I am sure there is a simple solution to this but here goes (BTW I am using a Windows 7 machine and a variety of versions of PS).
Somebody showed me an interesting way to address color cast in photos and he showed my using CS2. I tried it at home on Photoshop CC, CS6 and CS5.5 with no joy. I then tried it on CS2 (at home - so the same machine with the other versions on) and it worked as I was shown.
The method is this.
Load the image that has a color cast.
Select Adjustment layer and add a Photo Adjustment layer
Select "Color" rather than one of the pre-defined filters and click on the Color Box to activate the eye dropper.
Using the eye dropper select a part of the picture that is closest to the cast that you want to remove
Then in the "a" and "b" boxes in the dialogue box make the numbers the opposite of what they are (For example if the number is 32 change it to -32, if the number is -32 change it to 32).
Then click on OK to change the color.
Then you should be able to use the density slider to increase or decrease the colour cast.
Now all of that works fine if I am using CS2 - but if I try it in CC, CS6 or CS5.5 when I try to use the eye dropper I cant select any colors in my picture. No matter what I click on I get White, it will not pick up the color.
I am sure I am doing something wrong, but I cant for the life of me think what!
Any ideas?
Cheers
John

Rkelly - Thanks for that - it worked.
Not wishing to sound un-gracious. But how come I dont need to use Ctrl if I apply the effect via the "image/adjustment/photofilter" route but do need Ctrl if I try to apply the same thing via an adjustment layer?
It isnt a huge problem now that you have supplied me with the solution.... I just want to understand as much as I can.
Cheers
John

Similar Messages

How do I create layers in an adjustment layer and transfer those layers?

How do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my lay out and what i've done this far.
Thank you

You need to get out of single image view. Go to the editor preferences>general>Allow Floating Windows, then go to Window>Images>Float all in Window, then Tile or Cascade. Then you should be able to drag the layers from the layers panel for one image into the main image window (not the panel) for another image.

Indesign Cs4 6.01 and Eye Dropper Crash

Anyone getting this problem?
Have some text off to the side in a textbox, and i am trying to use the eye dropper tool to change its style to some text in another text box and Indesign is crashing.
The text is even the same font family, just a differnt colour and size.

First thing to try is replacing the InDesign preferences.

Adjustment layer and Magic Bullet Looks corruption

I often find using the adjustment layers to apply colour correction an easy trick and therefore love the concept.
However, I've recently noticed that PP CS6.0.2 does not like MB Looks to be applied to adjustment layers all that well.
On two recent projects, the primary sequence has become corrupt (PP loads and quits immediately) and I have to recover the edit by copying the none adjustment layer tracks to a new sequence and then relinking the media.
Today, I spent 4 hours recovering another complex sequence and wanted to know if any other person has had a similar experience applying MB Looks to an adjustment layer?
A word of warning to others who might be thinking of the same 'trick'.
Perhaps I am expecting too much of the adjustment layer concept.
Thanks for any responses.
J.

I found myself here because... I was trying to open last saved project and it just crashes.
I did use Magic Bullet "Looks" and "Cosmo" on both footage and adjustment layers.
"Panic... Drink Coffee" !!!!! idea !!!!
Uninstall Magic Bullet
Launch CS6APP
Open same project file warning you don't have plugins installed.
Delete the "Adjustment Layers" (you won't be able to get the adjustment layer settings back but, you will get the edit back
Save project "new name"
Re-install plugins
Re-open CS6APP
"new name" project file opens fine without the adjustment layers.
But wait!!! Why should you uninstall Magic Bullet?????
Open a new project
Import entire project file into new project
Go to media bin and delete the "adjustment layers"
Find last Sequence that had the adjustment layers and you can go back to working
We put finishing effects on entire or even sections of full edit
1. Select edit < New Sequence from clip... apply effects on new sequence
2. Not "adjustment layers" BUT!!
2. Right now I found this just be an issue with RedGiant plugins I'm going to pass this post along to them..
This is a link to our project we had this happen too. (Sound tweaking)
Superfine Bakery : Who we are on Vimeo
CS6APP 6.0.5
MacBookPro Retina 16 gigs of ram
Thunderbolt 2 drive with source
USB 3 drive writing scratch
(2) external monitors attached

Color picker and eye dropper tool not working

is there stright forward tellephone number to report and progam error on cs6 so i can get some thing do about this, adobe seem a big workn around why can't they just leave a tele number

Update your graphics driver and check your color profile settings. Not a bug, just a bad configuration on your computer.
Mylenium

Eye dropper in photo filter not working

The eye dropper is still not behaving correctly (after years of history with this same problem from what I can gather on these forum discussions).
I'm on the latest 14.2.1 Ps CC. Both 32 and 64 bit give the same problem. Turning off my video card does not make a difference. Resetting all my tools/presets does not make a difference. The eye dropper only works when dealing with a background layer, not with the photo filter layer. It doesn't sample the color clicked on, nor does it show the sampler ring. It forces the photo filter color to white, regardless of the color sampled.
Any help would be greatly appreciated!

Can you post some screen captures of what you describing. Include the layers palette with all layers thumbnails showing. A Photo filter layer has no actual pixels its an adjustment layer which is logically clipped to the layer its above. When I try using the eye dropper it seems to pick up the color it produced on the layer its logically clipped to. However if the layer has no pixels in the area sampled nothing is picked up and the foreground swatch doesn't change. Does you image layer have any empty pixels ones that have been cut out and your set to sample current layer,
More testing show if set to current layer and your sampling on the adjustment layer it acts like the adjustment layer like a composite layer and lower layer colors will be picked up if the image layers pixels are empty. Which layer is the target when you sample the image layer or the adjustment layer and what sampling mode are you using?
It is also not clipped to the lower layer I was wrong it seem to be for I was using Black and White background layers. When I change to Yellow I could set it was not clipped but could be clipped and if I sampler over an empty area I would get white not nothing i would get white.
So two things seem strange to me when you try to target the adjustment layer the adjustment layer's layer mask is targeret instead of the layer it takes a second click to targer the layer. And the other odd thing is when cliped if you sample over empty pixels you get white rather then no color change.
Message was edited by: JJMack

Eye Dropper, Colour Palette and Adjustment Layers?

Hi guys,
I tend to need to change the colour of various items in images (usually because I want something in the image to be a corporate colour.
My old technique used to be something along this line:
Open image
Ensure the colour palette is visible
Convert to CMYK (or not)
Create curves or channel mixer adjustment layer
Eye dropper the image on a pixel I wanted to change
Manipulate the adjustment layer and watch the colour feedback from the colour palette
When the colour palette said rughly the right colour values--job done!
My problem is, whenever I eye dropper the image it tells me the current colour; but when I go back to manipulating the adjustment layer the colour palette nop longer gives me live colour value feedback like it used to in CS3. This change occured when the Adjustments Palette was introduced
This has been driving me crazy ever since CS4 came out (infact, I ignored CS4 because of it).
Is there anyway to restore live feedback???
Please, please, PLEASE help meeeeeeeeeeeee...! :'o/

Try something like this:
1. Make the curves adjustment layer
2. Click on the curve adjustment layer thumbnail in the layers panel
(not the layer mask, but the curve icon to the left of the layer mask)
3. Manually select the eyedrooper tool in the toolbox and ctrl click in the image to set the
point or points on the curve.
When you adjust the curve from inside the curves panel, you should be able to see the
changes in the color panel.
For the channel mixer, click on the channel mixer icon and then click inside the image with the eyedropper tool
and you should be able to see the changes in the color panel when you move the sliders.
MTSTUNER

Animate transform of sequence and adjustment layer

New to AE - trying to use it to rescue some time lapse footage taken in very dusty conditions. Lots of sensor dust
So far
Exported sequence as tiff's from LR
Imported as tiff sequence in AE
Created "New comp from selection"
Set the comp to 1080p24
On the footage layer - scaled down to 46% to see all the image
Added an adjustment layer
Added small ellipse masks over each dust spot to the adjustment layer
Feathered all masks to about 10px
Applied the dust and scratches filter to the adjustment layer and set to radius 30
This looks very nice. It's worked for all 6 sequences so far.
What I want to do now is a false pan or zoom by using different parts of the image - after all - the tiff sequence is far larger than 1080p.
I tried creating a new comp - embedding the original comp as a layer and then keyframed the position and scale of the layer. This gives me the effect I want and holds the footage and adjustment layer transform in sync - but - I'm seeing poorer quality as I scale closer.
I suspect that if I applied the scaling to the original footage layer in the original comp I'd not see this degredation (in other words - instead of scaling the outer comp from 100% to 130% I reckon that I should scale the footage layer itself in the inner comp from 46% up to 80% or so). This would also be more flexible as I could move across an image with position transform rather than just scaling.
But I just can't quite see how to also scale and position the adjustment layer in sync so that the masked ellipses stay over the dust spots over time.
I'd thought I could simply manually apply the same transform to both layers - but the footage layer starts at 46% scale - the adjustment at 100% (looks like it'd work for position tho).
Would be glad if someone could point me in the right direction

That looks perfect. Didn't even know it existed - but it looks like it does exactly what I want - control the inner params on each layer from the outer comp.
Will give it a try.
Then I just have to get quicktime rendering not to crash but that's a different question

Cc opacity keyframe on black and white adjustment layer doesn't work

hi
i use premiere cc under w8.1 pro
well i noticed a strange behavior
i added an adjustament layer , black and white effect , and several keyframes
seems that premiere reads only the first one
for example
1) keyframe -> @0% the second keyframe @100% the video is all in color ,doesn't matter how many keyframes i add
2) first key @100% second @0% (opacity) the video is all in black and white , again doesn't matter how many keyframes i add , only the first is read
i tried the black and white effect , on video ,titles and so on and it works perfectly , it doesn't work on the adjustament layer
i tried others effects on adjustament layer and they work
is a bug ?
is there an known bug in prev. versions?
thanks

thanks i do it, saturation
but can't understand why this happen with adjustament layer only
may i know which cc version do you use?
sometime i think to buy c6 , i have cc subscription

How do you copy and paste an adjustment layer to the center of a new doc?

Hi,
I know I can drag an adjustment layer to a new document, but it's never in the center. So I end up with an image with adjustments made, but not across the whole image. Therefore I have to eyeball and properly center the adjustment layer to make sure the adjustment sits in the center and is therefore made across the whole image.
Is there a way, or a shortcut, to do this whole process much easier? For the steps I have to do and hassle, I usually skip copy and pasting an adjustment layer and just re-create a new one.
They have to have made a way to do this, but I can't find the instructions online anywhere!
thanks!
Liz

Forgot to add that it would be an adjustment layer with some kind of mask on it already. The mask is uncentered when copy and pasted which throws it off.
I guess the same question would go towards doing the same for an object. How to copy and paste it over to a new doc, keeping its position within the document? is this possible?

New Adjustment Layer

Hello. I am having trouble in New Adjustment layer. When I open Bridge and select a photo and go to CS3 I set up a duplicate layer and if I go to New adjustment layer and select any from that menu, ie, Photo filter... color mixer to convert to B&W the event show up in the layers side bar but the the eye dropper tool shows up in the photo and CS3 locks up. If I go to Image>Adjustments I can use the filters. However if I go Layer>New Adjustment Layer it locks up. I have recently added an Epson RX595 printer but thinking that is the the problem disconnected it but it still locks up and I have to go to Force Quit to restart CS3. I am new to iMac and have Leopard 10.5.2 3GB in RAM.
What am I doing wrong or what needs to be done.

Arnold,
Your post is far from clear. You may want to clarify for the benefit of others who may be able to help.
Since you mention Leopard, however, I can't help myself.

B&W Adjustment Layer Problem in CS4

I am fairly proficient at PS and have used B&W adjustment layers often to create great black and whites. One of the best features of the B&W adj. layers is the "on-image" color adjustments (the hand with the left/right arrows in the upper left cornet of the adj panel which allows you to drag in the image to adjust the grayscale value of any color in the image). This has worked great until recently.
All of sudden, my B&W adj layer started acting strangly. The on-image slider does not activate an eye dropper icon and all the sliders are always showing specific numbers. When I try to manually slide a color slider, it changes the image as if the slider was moved...but the number in the slider box never changes. Very weird. The same "on-image" function is also available on a curves adjustment layer, and it works just fine.
Has anyone ever experienced their B&W adjustment layers to exhibit this behavior before?
I am running CS4 11.0.2, Win XP. I can think of nothing that has changed in my system lately.
Thanks for any insight.
-Jim

Thanks, I might try that, but the B&W adjustment layer isn't really a "tool" and the on-image picker is unique to that panel - so I'm not sure what resetting a tool preference (or all tool preferences for that matter) would do.
However, I may try it anyway if I continue to not find a solution.
Thanks,
-Jim

Cannot adjust adjustment layer

I am attempting to do a little color correction to an RGB image using an adjustment layer and the Photo Filter.
I select Layer > New Adjustment Layer... > Photo Filter and a new adjustment layer appears in the Layers Palette. I should also get the Photo Filter dialog so I can do the adjustment. But, the Photo Filter dialog never appears, and it's not selectable from the Image > Adjustments menu. There's nothing I can do with the adjustment layer.
Anyone else ever have this problem? It's a new one to me. Suggestions on correcting this are welcome.
Photoshop CS5 / Mac
Thanks,
Jim

What happens if you double click on the Photo Filter icon in the layers panel?
If you go to Window>Adjustments, does it show there?
Do other adjustment layers work?
What is the color mode and bit depth of your document?
(Image>Mode)

Using color sampler values with curves adjustment layer

Hi, I have just started trying to teach myself javascript. Based on preliminary research, it's become apparent that there are many functions in Photoshop that are either extremely cumbersome or impossible to code by hand without using the Script Listener.
My goal is as follows: first, I will manually load two photos as layers in a single document. Then I will manually place two or more color sampler points on the document. At this point I would like the script to create a curves adjustment layer (ideally clipped to layer 2) and place as individual channel anchor points the RGB data from the color sampler points on Layer 2, and then adjust the output of the points on each channel to the color sampler RGB values of layer 1.
As my first script, I realize this is probably going to be a lot of work.
I did find some code that returns the average value of manually placed color sampler points. Conceptually then, I would need to add code which creates a new curves adjustment layer and adds those RGB values (from a specific layer) as anchor points on the individual channels, and then hides one layer and looks at the RGB values of the color sampler points, and uses them as the output values for each anchor point.
Sounds simple enough from a conceptual standpoint.
I'm looking for some guidance on how to get started.
Which parts will I definitely need Scriptlistener for and will that be adequate to do the job?
How would you recommend I get started on this?
Thanks very much for any input.

The function I had provided was an example into which you would need to feed the values you got with Mike’s code.
The code below would create a Curves Layer as shown in the screenshot, but I’m not sure it would work reasonably for all cases.
// with code by mike hale;
// 2012, use it at your own risk;
// call the function to run the script
#target photoshop
createCurveAdjustmetFromColorSamplers();
// create a function fo hold most of the code
function createCurveAdjustmetFromColorSamplers(){
    // first add some condition checks
    // needs an open document in a color mode that supports layers
    if(app.documents.length == 0 || ( app.activeDocument.mode == DocumentMode.BITMAP || app.activeDocument.mode == DocumentMode.INDEXEDCOLOR ) ){
        alert('This script requires a document in Greyscale, RGB, CMYK, or Lab mode.');
        return;
    // check for at least two colorSamplers
    if(app.activeDocument.colorSamplers.length < 2 ){
        alert('This script requires at least two colorSamplers.');
        return;
    // last check for at least two layers - assume they will be on same level( not in layerSet )
    if(app.activeDocument.layers.length < 2 ){
        alert('This script requires at least two layers.');
        return;
    // create varaibles to hold the colorSampler's color property for each layer
    // for the bottom layer
    var outputArray = new Array();
    // for top layer - array could also be created this way
    var inputArray = [];
    // store the number of samples because it will be needed in more than one place
    var numberOfSamples = app.activeDocument.colorSamplers.length;
    // hide the top layer
    app.activeDocument.layers[0].visible = false;
    // collect the samples from the bottom layer
    for(var sampleIndex = 0; sampleIndex < numberOfSamples; sampleIndex++ ){
        outputArray.push(app.activeDocument.colorSamplers[sampleIndex].color);
    // turn the top layer back on
    app.activeDocument.layers[0].visible = true;
    // collect those samples
    for(var sampleIndex = 0; sampleIndex < numberOfSamples; sampleIndex++ ){
        inputArray.push(app.activeDocument.colorSamplers[sampleIndex].color);
    // make sure the top layer is the activeLayer
    app.activeDocument.activeLayer = app.activeDocument.layers[0];
// create arrays of the color values:
var theArray = [[0, 0, 0, 0, 0, 0]];
for (var m = 0; m < inputArray.length; m++) {
theArray.push([inputArray[m].rgb.red, outputArray[m].rgb.red, inputArray[m].rgb.green, outputArray[m].rgb.green, inputArray[m].rgb.blue, outputArray[m].rgb.blue]);
theArray.push([255, 255, 255, 255, 255, 255]);
// sort;
theArray.sort(sortArrayByIndexedItem);
// makeCurveAdjustmentLayer();
rgbCurvesLayer (theArray)
////// make rgb curves layer //////
function rgbCurvesLayer (theArray) {
// =======================================================
var idMk = charIDToTypeID( "Mk " );
    var desc5 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref2 = new ActionReference();
        var idAdjL = charIDToTypeID( "AdjL" );
        ref2.putClass( idAdjL );
    desc5.putReference( idnull, ref2 );
    var idUsng = charIDToTypeID( "Usng" );
        var desc6 = new ActionDescriptor();
        var idType = charIDToTypeID( "Type" );
            var desc7 = new ActionDescriptor();
            var idpresetKind = stringIDToTypeID( "presetKind" );
            var idpresetKindType = stringIDToTypeID( "presetKindType" );
            var idpresetKindDefault = stringIDToTypeID( "presetKindDefault" );
            desc7.putEnumerated( idpresetKind, idpresetKindType, idpresetKindDefault );
        var idCrvs = charIDToTypeID( "Crvs" );
        desc6.putObject( idType, idCrvs, desc7 );
    var idAdjL = charIDToTypeID( "AdjL" );
    desc5.putObject( idUsng, idAdjL, desc6 );
executeAction( idMk, desc5, DialogModes.NO );
// =======================================================
var idsetd = charIDToTypeID( "setd" );
    var desc8 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref3 = new ActionReference();
        var idAdjL = charIDToTypeID( "AdjL" );
        var idOrdn = charIDToTypeID( "Ordn" );
        var idTrgt = charIDToTypeID( "Trgt" );
        ref3.putEnumerated( idAdjL, idOrdn, idTrgt );
    desc8.putReference( idnull, ref3 );
    var idT = charIDToTypeID( "T   " );
        var desc9 = new ActionDescriptor();
        var idpresetKind = stringIDToTypeID( "presetKind" );
        var idpresetKindType = stringIDToTypeID( "presetKindType" );
        var idpresetKindCustom = stringIDToTypeID( "presetKindCustom" );
        desc9.putEnumerated( idpresetKind, idpresetKindType, idpresetKindCustom );
        var idAdjs = charIDToTypeID( "Adjs" );
            var list1 = new ActionList();
                var desc10 = new ActionDescriptor();
                var idChnl = charIDToTypeID( "Chnl" );
                    var ref4 = new ActionReference();
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idRd = charIDToTypeID( "Rd " );
                    ref4.putEnumerated( idChnl, idChnl, idRd );
                desc10.putReference( idChnl, ref4 );
                var idCrv = charIDToTypeID( "Crv " );
                    var list2 = new ActionList();
// add r points;
for (var m = 0; m < theArray.length; m++) {
          addCurvePoint (list2, theArray[m], 0)
                desc10.putList( idCrv, list2 );
            var idCrvA = charIDToTypeID( "CrvA" );
            list1.putObject( idCrvA, desc10 );
                var desc15 = new ActionDescriptor();
                var idChnl = charIDToTypeID( "Chnl" );
                    var ref5 = new ActionReference();
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idGrn = charIDToTypeID( "Grn " );
                    ref5.putEnumerated( idChnl, idChnl, idGrn );
                desc15.putReference( idChnl, ref5 );
                var idCrv = charIDToTypeID( "Crv " );
                    var list3 = new ActionList();
// add g points;
for (var m = 0; m < theArray.length; m++) {
          addCurvePoint (list3, theArray[m], 2)
                desc15.putList( idCrv, list3 );
            var idCrvA = charIDToTypeID( "CrvA" );
            list1.putObject( idCrvA, desc15 );
                var desc20 = new ActionDescriptor();
                var idChnl = charIDToTypeID( "Chnl" );
                    var ref6 = new ActionReference();
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idChnl = charIDToTypeID( "Chnl" );
                    var idBl = charIDToTypeID( "Bl " );
                    ref6.putEnumerated( idChnl, idChnl, idBl );
                desc20.putReference( idChnl, ref6 );
                var idCrv = charIDToTypeID( "Crv " );
                    var list4 = new ActionList();
// add b points;
for (var m = 0; m < theArray.length; m++) {
          addCurvePoint (list4, theArray[m], 4)
                desc20.putList( idCrv, list4 );
            var idCrvA = charIDToTypeID( "CrvA" );
            list1.putObject( idCrvA, desc20 );
        desc9.putList( idAdjs, list1 );
    var idCrvs = charIDToTypeID( "Crvs" );
    desc8.putObject( idT, idCrvs, desc9 );
executeAction( idsetd, desc8, DialogModes.NO );
return app.activeDocument.activeLayer;
////// add curve point //////
function addCurvePoint (theList, valueHor, theNumber) {
var desc11 = new ActionDescriptor();
var idHrzn = charIDToTypeID( "Hrzn" );
desc11.putDouble( idHrzn, valueHor[theNumber] );
var idVrtc = charIDToTypeID( "Vrtc" );
desc11.putDouble( idVrtc, valueHor[theNumber+1] );
var idPnt = charIDToTypeID( "Pnt " );
theList.putObject( idPnt, desc11 );
////// sort a double array, thanks to sam, http://www.rhinocerus.net/forum/lang-javascript/ //////
function sortArrayByIndexedItem(a,b) {
var theIndex = 0;
if (a[theIndex]<b[theIndex]) return -1;
if (a[theIndex]>b[theIndex]) return 1;
return 0;

Photoshop Elements 9 - unable to use brush in adjustment layer

HI
I'm new to Adobe Photoshop Elements and have recently purchased Elements 9. I am having problems using the brush in adjustment levels.
I've opened a RAW image and converted it to black and white by desaturating it using an adjustment layer. I'm then trying to adjust the black and white image using several adjustment levels. I'm using the brush to black out the parts of the image in the particular adjustment layer I don't want changing. This worked initially, but for some reason, the brush stopped working in the adjustment layers. It's a soft brush set to 300px, the mode is "Normal" and opacity is 100%. Put simply, it's not obliterating anything in the layer, nor does anything appear in the thumbnail over on the right (both these things happened before)
The brush works normally when adjusting an image with no levels i.e. when you simply open a RAW or TIFF file and use the brush.
I've tried uninstalling the programme and reinstalling, but the porblem persists.
Can anyone offer any help? It's frustrating as I can't selectively adjust my image. Am I doing something wrong, is it a glitch, or is it just a simple case of ticking a simple box some where in the pre-sets?
Hoping someone can help.

Check that you have your brush set to black (foreground color black)
and that your actually painting on the layer mask (click on the layer mask
to make it active).
Try just painting on the mask of your adjustment layer used to desaturate the photo
with a black brush (the color should come back)
Sometimes with multiple adjustment layers, the strokes on one layer mask may overlap
the strokes on another.
If you want more control over a black and white conversion, you might try something like
the following.
1. Add a hue\saturation adjustment layer and change the layers blending mode to Color
2. Add another hue\saturation adjustment layer and move the saturation slider to -100
3. On the first adjustment layer (the one with the color blend mode), move the hue
and saturation sliders for different black and white effects.
4. If you want to add a color tint, set the top hue\saturation layer to colorize and
adjust the hue and saturation sliders for different tint effects.
MTSTUNER

Photo Filter adjustment layer and eye dropper

Similar Messages

Maybe you are looking for