Photo Frames - I have 3, should have 30ish
PSE9 installs with only 3 frames for photos. The tutorial movie shows over 30 pre-configured frame options. How do I get all of them?
Click on the content tab
Click on the dropdown menu and choose show all.
You can also turn on/off shapes, text etc by clicking each icon so that only frames are showing.
Similar Messages
-
Photos not updated when in photo frame mode
I have two iPads and I have enabled photo frame to display photos only from photostream using the same account. The reason I did this is to give one iPad to my elderly parents so they can see my family photos in photo frame mode, just like the regular digital photo frame except photos are dynamiclly updated.
I was expecting the photo frame to pick up newly taken photos. However, the photo frame still display the same photos in the loop unless I unlock the ipad and start photo frame again (by pressing power button twice and then the photo frame button.) Does anyone have a solution for it?Good that you solved your problem. There will probably be other users that need to solve the same problem and your solution might help many others. The support here comes from users helping other users.
-
My daughter accidentally reset her ipod4 to factory settings so I restored from the last iCloud backup. All her photos were on camera roll so I believe they should have automatically been backed up, but none have been restored. Why?
When she plugged in the ipod last night it backed up again so that now shows as the latest backup. No previous backups are listed so I do not seem to have the option to rerun the old one. She had many pictures on the camera roll taken from well before July. I can only presume that the backup in July must have been incomplete - but then I didn't think it was supposed to list as an option to restore from. Luckily many of the photos had been backed up on the pc but I am very frustrated as to why the icloud backup didn't protect them. Thank you for your advice though, I appreciate it.
-
Some help would be appreciated.
When you look at that button that says "Photos & Camera" and shows you the 2.3GB number, it should have an arrow at the right side.
Click the button. It will break down where the 2.3GB are located. They may, for example, be on your camera roll. -
I have no photo edit in iPhoto it should be simple but its just not there can you help
Hi
i have no photo edit in iPhoto it should be simple as click and it comes up but it is not there
hope someone can help
thanksNope - you actually have to share details as can not see your computer
See hints here - Writing an effective Apple Support Communities question - and - Find answers and ask new questions
LN -
Hi,
I am trying to make a photocard in iphoto '09 but when I open an album and then click on card the area where the photos to drag and drop should be is blank. I have managed to make a calender (which has the photos there to use) and can't work out what I am doing wrong. Please can someone help? Thank youPut the photos in an album, open the album and select all, go to the create button and select card - to add more photos to the project drag them ot the card project in the source pane on the left
LN -
I should have said in my previous message that the iphoto program I am using is for an ipad 2. I simply want to know how to delete an edited album which contains one photo that I do not want taking up space.
OK....I'm stumped. The message you are seeing is typically there to protect someone from syncing with a different computer/iTunes account. Is there any way anyone else has used your iPad and possibly connected it to their computer?
-
I don't have the option on Photoshop CC of using Photo Frames from the Fill Menu.
Is this a bug?
I have an Nvidia GTX 670 which is enabled in preferences.
I have noticed some reference to items like Photo Frame being greyed out - it just does not appear on my PC.Thanks, That's where it was hiding.
I was looking at the tutorial
Create with patterns | Learn Photoshop CC | Adobe TV
and it was under Edit/Fill/Scripted.
I presume they've moved it.
Thanks.
Alex -
We are just about to purchase an iphoto book but received the message that we had one or more empty photo frames. We have gone over each page several times and found no empty frames. We cannot purchase the book because we cannot get beyond this message. Any ideas on how to rectify this situation?
So far every time this erros has occured it has been correct - the most difficult one to find is a full page photo layout behind a full page photo - this is hard to find - click here for a discussion on how to find it
LN -
I've created a photo book in iphoto on my ipad. When I try to order it (by clicking the price of the book in the top right corner) it says that Your book contains empty photo frames - add photos to the empty frames, or change the page layout to include fewer photos" but when I look at each page, there are photos in all the frames. What do I need to do to order this book??????
Thanks so much for any help offered!It doesn't appear under the iPad device on the left-hand sidebar of iTunes, you need to select the iPad device on the sidebar and then select the Photos tab on the right-hand side of iTunes e.g.
And then on the right-hand side : -
I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html -
Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
A 6 hour installation that should have only taken 30minutes!! Very unhappy customer!!
I am very upset about a recent purchase I made at your store. I bought a fridge (an open box item) and it was going to be delivered on Friday, March 28. The delivery guy (Jake) came at about 10:30 and hauled away our old fridge and brought in the new fridge BUT then the trouble began. Jake said that the hose part we bought won’t fit the waterline and we need an adapter (looks like the size of a nut or washer – just a little part) I asked him if he had this part on the truck and he said he doesn’t carry parts on the truck and told me I need to go to town (I live 30 miles out of town!) and go to the store and get the part – I was a little confused because he was supposed to be installing the fridge. I didn’t know much about the fridge so I said ok, what would I need to tell them and he said tell them you need an adapter that is 3/4” to a 1/2”. So he kinked my waterhose and put a bucket underneath it but it still dripped a little bit so I hurried to town (it is about 11:30 now) to Best Buy to get the adapter and the guy in the appliance area didn’t know what I was talking about so they called Jake and he told the Best Buy employee what I needed and the employee said they don’t carry that part….. so I went to Lowes and they didn’t know what I needed because it didn’t make sense to them that I would need a 3/4” to a 1/2” adapter. I then went to Menards and talked to the appliance department and then they didn’t know so I was sent to the plumbing department and the lady was very nice there but she also didn’t think it made sense that I needed a 3/4” to a 1/2” adapter because waterlines are usually 1/4”. So I called up Best Buy while still at Menards and they had Jake (the delivery /installer) talk to the lady at Menards and explain to her what I needed so he told her the same thing – I needed a 3/4” to a 1/2” adapter. She said that the only thing they would have is 2 options a 3/4” to 1/2” adapter or 1/2” to 1/2” adapter (they both looked like the size that would fit a garden hose!! I didn’t think that was right but that is what Jake from Best Buy – the delivery /installer guy told the lady at Menards. So I bought those 2 parts and raced back home because now it was 1:30pm in the afternoon after running around for 2 hours looking for an adapter that Jake said I needed. I got home and was immediately livid!! The two parts were what I thought TOO BIG! Both ends were only 1/4”! So I called Best Buy again and talked to Mike (I didn’t get a last name) he was very nice and tried to be helpful . I explained what happened from the beginning (around 10:45am till now 1:30pm) and told him this is outrageous I am missing a whole day of work because of this when I could have been to work by 11:30am if Jake did this correctly. I told him I can text him photos of everything 1) The end of the water line 2) the end of the fridge 3) both ends held up together 4) each end by a tape measure to show it was only 1/4”. He said that would be very helpful so he game me his number and I texted the photos to him and I got a call 2 minutes late and he said “umm… I am so sorry for the inconvenience but all you need is an adapter for a female end to a make end and they have those parts on their trucks”, I asked if he was being serious because it was around 2:30pm now and I still don’t have my fridge installed! Mike said he would call Jake and tell him to get to our house and put the waterline on with the part from his truck. Mike called back after talking to Jake and he said that Jake was in Crookston, MN for a delivery but would come right back to our house as soon as he was done. Jake got to our house around 3:30pm and came in and I showed him the parts that I bought that HE told the lady at Menards I needed. He said he didn’t know what to do. I told him I talked to Mike at Best Buy and he said you have the part on your truck. He said he would go look. He came back in (sure enough) with the part!!! He connected the waterline to the fridge and it was done (Literally 10 minutes) and left around 4:15pm. I am so disgusted with the incompetence of your delivery guy/installer, for something that should have taken a total of 1/2 hour or less. My fridge should have been delivered and installed and I should have been on my way to work by 11:00am to 11:30am. Instead I spend a whole day running around and make numerous phone calls that were NOT NECESSARY. Then I tried to call the store and explain about what happened but Nichole – said she was the Home Sales Manager, said there was nothing the store could do and didn’t even acknowledge the incompetence of the installer and she didn’t even attempt to resolve this issue. I have make attempts to get this matter resolved but have not received ANY responses, I am hoping someone will respond to this message?!?
Solved!
Go to Solution.Hello magicmel,
I’m positive you were excited to receive your new refrigerator, and expected the installation to go smoothly. Our installers should be knowledgeable in their field, and able to troubleshoot issues such as you described. It’s truly regrettable that Jake may not have known which part you needed, and sent you on a trip across town to look for a part that was unnecessary.
After running from store to store only to find that the part needed for your refrigerator was in the installer’s truck, I can imagine how frustrated you would be, as I would be infuriated if I were in your shoes. While I’m glad to hear that Mike was able to get things resolved with just a few pictures, I apologize for any inconvenience this may have caused you.
I was able to locate your service order and refrigerator purchase, and I am sending you further information in regards to this experience via a private message. You can check your private messages by signing into the forum and clicking the envelope icon in the top right corner of the page.
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message -
Hi - I have had iCloud photos turned on for about 2 weeks. My old iPhoto library of around 22k pics uploaded no problem. My issues are with now viewing them on my iPhone and iPad, which are set to optimise storage.
On the iPad I used to have a folder of about 1200 pics which I'd use as a photo frame by chucking on as a slideshow on my desk at work. I don't connect to the wifi there. Since iCloud photo I can't do this, as the pics are mostly low res, if there at all (two weeks after upload the vast majority of my library appears as just a sea of grey squares on both i-devices - thumbnails have not appeared for huge swathes of the library at all. Is this going to right itself?). I read about using Favourites to ensure local full res copies are kept, so I've gone through and favourited each pic (no option to do this in bulk on the iPad?) and this has ensured at least that each pic of those selected have thumbnails now, but no guarantee that the full image will display. Even when I run the slideshow connected to wifi the low-res pixelated placeholder is what's displayed for most of the time the image is on the screen. And if Favourites is the way to force local hi-res copies I still have no need for these to be also stored in full resolution on my iPhone.
Basically, I want a way to force folders to be available in full, offline, and specific to the device. Is this possible? Big step back for what I use this thing for if not.Is there anything ornate in the frame images. Or are they more or less just made with strips of standard framing molding. If nothing fancy just molding then an action that uses patterns and a little bit of scripting can frame your images orientation does not matter a little scripting handles that. To scale you images to the proper size will take some scripting and the spread sheet exported to a CSV file containing filename width and height.
My crafting action package contains 12 scripts to be used in actions. Two of which would be very useful for your project. If you create you script to size the images so they have the correct print size. The framing of these would be easy. The action would first run two of my run twice scripts for action. The first scripts saves the documents current resolution so the action can change it to what it need the document to have for its framing patterns. The second script will rotate portrait images to landscape orientation. The action can the add the 1" frame. once the frame is in place the action the runs the two scripts again. The second time these action run they will restore thing. One will rotate the documents it rotated to landscape back to portraits and the other will restore the documents resolution. My image visualization package has framing actions and a script to make a 1" mitered selection to be filled with the framing pattern.
Image Visualization Package Example
Crafting Actions Package
Contains
Action Actions Palette Tips.txt
Action Creation Guidelines.txt
Action Dealing with Image Size.txt
Action Enhanced via Scripted Photoshop Functions.txt
CraftedActions.atn Sample Action set includes an example Watermarking action
Sample Actions.txt Photoshop CraftedActions set saved as a text file.
12 Scripts for actions
Download -
Fixing a sequence created as 29.97 - should have been 25fps
It's been many years since I edited anything, as I primarily shoot commercials and edits are done by others much more qualified. My last Premiere software was purchased back when Photoshop 5.0 was new . . . so apologies in advance for this senior moment. I am now using Premiere CS5 build 5.0.1.
I shot this 2 camera fashion show as a favour for a friend and thought I did a very nice (but painfully slow) edit of a 6 minute pre-show and runway project. Hundreds of edit points and transitions . . . only to find on exporting to AME that I had stuffed up the sequence frame rate, which is to say it did not match my source FPS.
I shot both cameras as 25P, and created a source sequence @ 29.97 inadvertantly, then went on to create a multicam sequence (also @ 29.97, again, brain fart). I made all my edits and transitions on the multicam 29.97 sequence. I trancoded the sequence as 25p mp2 at high bit rate twice to see if I could get away with it. I tried both with frame blending and without, all at maximum render quality. I also tried to export it as a 29.97 movie and then let encore transcode it back to 25p. All the footage is jumpy as one would expect. The titles especially.
The 29.97 movie plays smooth as silk on my computer. . .
I then tried to then nest my multicam edited footage sequence in a new sequence that is created at 25p. Transcoded that whole project at 25p at all the recommended settings that I took from watching the top moderators sugestions. And that movie plays back just as jumpy.
While it would probably be good practice to re-edit the whole project again . . . I probably should be out trying to make a living right now instead of fixing a pet project for a friend. Fact is, I am not likely to let this just be, as it is too nice not to fix . . .
I thought of exporting and EDL and starting over, but I am not sure if that EDL would be any better in terms of sequence frame rate referencing. And the main thing also is that I thought by nesting the multicam sequence in a 25p sequence, that it should have taken care of all that anyway? Anyone know why that would not have worked, or what I should do now?
Your input and experience is greatly appreciated!
Cheers
Chris
PS; I have searched the forums first looking for answers, so please forgive if the answer was in so previous threadHey guys,
Thanks for the input. First off; I did think the transitions were intact, but only after looking closer, saw that all kinds of changes had been made. I did an EDL import but decided that I might just be better off fixing the copy and paste.
That said, We decided that the flash movie looked fine on his website and that for big screen, the H.264 movie I made looked great @ 29.97. SO I'm wrapping this up at that. I also got to play with the H.264 file on a USB stick and plugged into my PS3 which looked great as well, so that's something else I probably would not have tried otherwise.
All in all, I'm having a great time getting back into editing after years of simply shooting. I love PPro CS5. Actually, I'm having a ball with the whole master collection. My son needed it for school work, otherwise I may not have gotten into Encore, Illustrator and After Effects as well. Now I'm itching for a grunty box to make it all work without 4 hour 2 pass transcoding sessions. My 2 year old machine is choking!
Next time I'll pay attention to the basics . . . source footage sequence settings!
C
Maybe you are looking for
-
While deploying ear in home instance ORACLE10G EM console Base Exception
while deploying ear in home instance through ORACLE10G EM console. i am getting this exception Deployment failed: Nested exception Resolution: Base Exception: com.evermind.server.rmi.OrionRemoteException Disconnected: Connection reset. Disconnected:
-
BI 7.6 Latest Trail version after RSA1 action MaxDB stopped
Hi, BI 7.6 latest trail version i installed after RSA1 activation once system restarted my DISP+WORK.EXE got stopped, please tel me how to resolve when i see log stated below; trc file: "dev_ms", trc level: 1, release: "700" [Thr 2560] Thu Dec 27 22:
-
some of my jsp's take a very long time to appear on the screen...some users complain about that because they don't know if the server is down or if the server is working... So I would like to show them a kind of message like. "Page Loading Please wai
-
IGMP Querier with Bluecoat ProxySG
Hi all I ran into a problem with VIP for high availability on Blue Coat ProxySG. Both ProxySG send multicast packets to advise the other ProxySG that it is up and the priority is contained in the multicast packet, along with the IP address of the VIP
-
just wanna know, if i wanna download all the picture from icloud , do i need to keep both device on wifi or only pc where i will download.