Photo frozen after editing on the 4s! Help?

I was editing a photo on my brand new iPhone 4s and after I tried to "constrain" the photo there was no way to save it and return to the camera roll. I was able to see the photo on my computer and deleted it, however it remains frozen on the editing screen when I open my "photos". Any suggestions? Thanks.

Seriously? No one knows the answer to this?

Similar Messages

In iphoto, how do i save a photo after editing, in the same or higher file size, it's saves in a lower size

in iphoto, how do i save a photo after editing, in the same or higher file size, it's saves in a lower size

It's rather more complicated that this.
iPhoto is a lossless editor. You don't lose any quality on your shot in iPhoto.
The file size you see reported is the size of your iPhoto Preview: this is what gets used if you access the data via a media browser. It's a "good-enough-for-most-uses" version of the shot. Email it, upload to websites, use it in Presentation, Word processing file etc
If you want to set the quality yourself then Export the photo using the File -> Export command.
You can choose to export to Jpeg, Tiff or png. Tiff is lossless but the file sizes are up to 10 times larger. Jpeg allows you to choose different qualities: High, Medium or low. The difference is the amount of compression involved. High quality means very little compression. It's not unusual for photos exported at this setting to have a larger file size than the original.
Which setting you choose depends on the use you intend. Further editing, printing then high is important. Sending to Facebook? Well low will do just fine there as they're going to trash the file anyway.
But the key point: the file size only becomes an issue when you export.
Regards
TD

My Yosemite startup screen (grey mac logo and bar) has frozen after installing. The progress bar is stuck at halfway.

My Yosemite startup screen (grey mac logo and bar) has frozen after installing. The progress bar is stuck at halfway.
H

I've had the same issue and despite clearing the PRAM and powering on and off repeatedly this is what has (at least temporarily) resolved my issue:
I've done this 3 times and sometimes it works right off the jump other times I've had to wait a bit and try again or power off and try again, once the start up screen is frozen hit Command : Option : Shift : Esc and a window should pop up "You restarted because of a problem..." from there you can go to your desktop. I haven't found an actual resolution to fix the problem but this does get you into your computer.
Hope this helps!

My photos look terrible in the library module after editing in the develop module. They look nothing alike. How do I solve this issue? Using Lightroom 5.

anyone have any ideas? The only way I can get around this is export the photo back into iPhoto and try to edit out the mess.

The waves you are seeing on your monitor must be more pronounced than what I'm seeing in the posted screenshots. The Library module uses Adobe RGB AND 8-bit JPEG preview images, which can cause banding in fine gradient areas (compared to Develop view), but I'm not seeing a huge difference in your screenshots. Here's a screen shot with my non-wide gamut monitor calibration profile. If my screenshot shows less banding than what you are seeing with the original images it indicates a monitor profile issue as described by twenty-one. A hardware calibrated monitor is recommended to prevent these types of issues.
The Library image also appears lighter in the shadow area, which probably indicates more Luminance NR needs to be applied or perhaps less sharpening. Try it and see if that helps with the issue.

Photos showing in Photo browser after editing

Each time I edit a photo and later when I bring up the Organizer I find that photo in the Photo Brower with no tags.
Did overlook a setting in the photo editor as I would like to have only photos that I want go get later from staging folder, camera, etc.
Please advise

John,
Please identify which version of PSE you have - 3 or 4?
>I would like to have only photos that I want go get later from staging folder, camera, etc.
Sorry but I do not understand your objective.
Do you not want to have the photos that you are editing in the Organizer?
You can't really edit the photo now and then go get it from the camera later - you would not have the correlation between the original photo file and its edit.
>Each time I edit a photo and later when I bring up the Organizer I find that photo in the Photo Brower with no tags.
Was this photo in he Organizer and did it have tags before you started to edit it? If it had tags before the edit, it should still have the same tags on the edited photo file.
If you never want the photo to be in the Organzier, you can uncheck Include in Organizer box in the Save As window of the Editor. But editing first and then bringing in to the Organizer later is not really a good workflow for most situations.
Barb O

Lightroom shows "no photo selected" after editing jpg in Photoshop

I am running Lightroom 5.3 and Photoshop 14.2.1x64 on Windows 7, 64-bit, 16gb RAM, plenty of free disk space (90gb on drive C). I am in Lightroom and have selected a subset of the library (using a key word clicking on the keyword's "right arrow" next to its count in the key word list). I then view a photo in the loupe view and right click, selecting "Edit in Photoshop CC" and checking "Edit a Copy". This takes me to Photoshop, where I edit the photo and save both as a .psd file and re-save the jpg copy, overwriting the copy that Lightroom made. When I go back to Lightroom (by reactivating the window), the copy flashes momentarily and then disappears from the window, replaced by the message "no photo selected" in the loupe view. When I go back to grid mode, I am back to the first photo in the selected group of photos and I then have to scroll through and find the photo I just edited (the jpg copy is still in Lightroom).
This problem did not occur when I first installed and used Lightroom. Rather, Lightroom would continue to display the edited jpg photo in loupe view when I returned to Lightroom from Photoshop. Now, however, it never does. Is there some Lightroom setting I accidentally changed? What am I doing wrong?
Thanks.
Jon

I'm using ProPhoto RGB in Photoshop. I have a test file that shows this issue: https://dl.dropboxusercontent.com/u/84023411/shadows_test.psd
This is a 16-bit ProPhoto RGB image with just 2 colors. The top part of the image is filled with RGB 10,10,10 and the bottom half is 0,0,0. If I open this file in Photoshop and use Apple's DigitalColor Meter utility to read the displayed values of the color of the top, using "Display native values", the result is 18,18,18. I expect it to be different than 10,10,10 due to the display profile but I would expect the same image viewed in Lightroom's Develop module to also read as 18,18,18 in the top half. But when I do this (import the PSD into Lightroom and open in Develop) the Meter reads 12,12,12. If I view the PSD in Loupe mode in Lightroom the Meter reads as expected, 18,18,18.
The difference should also be noticeable to your eye (at least mine) without using any measurements.
The result is that the dark shadows appear crushed when editing in Lightroom Develop mode.
The problem happens on both my 2008 Mac Pro with an ATI Radeon HD 5770 GPU and on my 2013 MacBook Air, although the values read on the Air are different than the Pro due to display profiles.
Normally, of course, I'm editing a RAW file in Lightroom and open that up in Photoshop (cmd+e), but this test seems to show that it happens with non-RAW files.

Photos deleted after iCloud backup. Please help!

So I did the iCloud backup from my old phone. I already had photos on my new phone and now they are deleted. Where would I find the videos and phots that were already on my new phone? The backup deleted all my new phone photos, and backed up all the old ones? Am I screwed? Please help!! Thank you

When you restore a backup, the restored data overwrites any existing data on the phone.
If you didn't back up your new phone before this happened, there is no way to recover the deleted photos and videos. It you did, restore the backup of your new phone to recover them, then import them to your computer as explained here before restoring the old backup again: http://support.apple.com/kb/HT4083.

Has anyone experienced photos disappearing after editing the date? Lion, Imac, Iphoto '09.

I am beginning the daunting process of sorting through all of my photos to make sure the date is correct. I made a change on a couple of photos, they then disappeared, presumably to the correct date. However, when scrolling to the spot it should have been relocated to, it is not there. The missing photos are not critical to recover, but I want to make sure I have this resolved before continuing further. Thanks!

I do not understand - How did you change the date?
If you are doing it correctly using only iPhoto then the photo will not change it location in the event it was in
Please give more information
LN

Imported Photos Lost After Editing

I imported 140 photos to iPhoto and they were all there. I edited them using the 'enhance' feature. When I was finished I discovered (to my horror) that only 5 or 6 photos were still there (the ones that I had not enhanced). Everything else was black. What can I do to get my photos back? Unforunately, I had erased them from the memory card. I would really appreciate any help you can offer me. Thank you!

a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card -- I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your database
LN

Photos black after editing

After I edit a photo it shows up in my library black. Any help with this would be greatly appreciated!

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to repair Library permissions.
If that fails:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

U2 Ipod Photo frozen after incomplete restore

I wanted to connect my ipod to a new PC. Nothing was wrong with mz iPod before I tried to connect it with mz new PC!
I loaded new iTunes 7.0 and after connecting my ipod it asked if I would like to restore the ipod , that was fine with me since all my audio files are also on my new PC
After the restore process the program asked me to complete the process disconnecting from the PC and connecting to a wall socket.
It did not get past the language selection! It just FROZE.
Now it is alreadz a day on the english menu item but I cannot select it !
I just did a reset but the same screen freeze comes back on !!My PC and iTunes do not recognise the iPod anymore...
How can I proceed ? The Apple advices always assume that iTunes recognises the iPod but what if it does NOT?

Have you tried resetting the iPod? For info, see here: How to reset your iPod
It may take quite a few tries, and this is best done when connected to power.
Also, if nothing else seems to help, this method has proven to have sucess:
Connect your iPod to your USB port for a few seconds, then promptly disconnect it (without resetting or ejecting it).
Do this with your iPod with a AC adaptor, a carcharger, etc.
This could possibly work to sucessfully break the iPod out of its frozen mode if no other attempts are working.
-Kylene

Frozen after typing (correct) password. HELP!

Any ideas before I do a hard reset?
As of last night, my Blackberry isn't fully unlocking after I type my password. I type the correct password and hit enter, the password entry section turns dark (or it will stay on the "Enter Password screen" and appear to freeze). (If I type the wrong password it simply prompts me again, so i know I am typing the correct password). This is after multiple battery pulls.
Sometimes after typing the correct password, I can hold down the blackberry button and it will bring up the box that lets me switch to BBM, the browser, the Home Screen, etc and I can "switch" to that program, but there is a sort of frozen shadow of the Enter Password box over what ever app I switch to and I can't use the trackball or keyboard in those apps.
This "frozen box' is preventing me from using any application on my BB!
I CAN receive calls. Barely. I can only make calls if I pull battery and DON'T unlock the phone and go to the Place Call option.
I upgraded to OS 5 over a week ago and things were fine until last night. I can hear my BB when it receives messages (the tones work) or txt etc but can't read anything due to the lock up!!
The only suspect is Google Talk which I installed two days ago and seemed to be hogging resources and draining the battery, however the phone worked fine for about a day with it on. Perhaps Google Talk is launching at startup and hanging things up? I doubt it but this is full disclosure.
I have also, pulled battery and removed the micro-sd card to see if that had any affect -- alas to no avail.
One analogy I can think of is it as if the Windows Explorer is hung but everything else is working.
THOUGHTS?
Solved!
Go to Solution.

Try this:
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Try UNclicking on the Google Talk app and remove it from the device and let's see if that is the issue.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT201441 i have bought a second hand iphone 4s which is stilllinked to previous owners itunes ID.I cant get his details off him as he has his money and is blanking me. I can't get anything on the phone after setting up the language.HELP!!

I cannot activatea second hand iphone 4s as i don't have previous owners itunes ID. I can't get anything on the phone after setting the language as its asking for activation. Please can anyone help ???? Ideally i would like to get it back to factory settings and start afresh but right now i would settle for anything. Should say i only have the phone and charger, no box so no details

Unfortunately, the only one who can help is the previous owner. Otherwise you will not be able to activate and use the phone. Apple can't/won't help you with this either.

In icloud, do photos pushed to other devices if i open photo stream after i take the photo??

do photos taken before activating photo stream pushed to other devices??

After activating photo stream on a device, any photos taken later are push to icloud's stream, then any other devices that have photo stream turned on should receive them.
Note that for a photo in photo stream to be synced to icloud, the device must be connected to wifi and the photo app on the device must be turned off. (This means shut down, not just closed.)

Saving Photo File After Editing

Once I edit a raw image in Photoshop Elements 5.0 and then try to go back to the organizer from editor, the program requires about 4 clicks to save the file. If I'm editing multiple files, I must do each of these clicks for each of the files.
Does anyone know how to streamline this save process?

Hi All -- I'm going to ask this question again as the issue continues to vex me.
I'm now using LR 2.2. The changes flushed to a image file (I use DNG) reflect the current 'before settings' in the develop module. In order to get recent develop module changes into the image file, one has to first execute "Copy After's Settings to Before", then save the image settings (cmd-S). That seems totally reasonable.
Here's my problem. I visit lots of images making edits. I don't always remember to "Copy After's Settings to Before" after making edits. In order to determine which image's I've made changes to I step through all my images in the develop module using the before/after view, executing "Copy After's Settings to Before". This is a big hassle. I need a better approach. First I don't always know which images I've edited and I usually don't care anyway. What I want is a macro that will perform "Copy After's Settings to Before" for multiple images. Is there such a feature or is this missing from LR?

Photo frozen after editing on the 4s! Help?

Similar Messages

Maybe you are looking for