Photo galery doesn´t work in blog entry with Intensedebate installed

I´ve installed Intensedebate with iWeb Buddy (because I want comments be relationated with the master page), and when i put a photo galery copied from other galery page it doesn´t work.
You can check it here http://www.jesusgb.com/blog/bl/Blog/Entradas/2011/8/3_Decenas_de_policias_impide n_el_acceso_a_Sol_a_todas_las_personas_sospechosas.html

The issue has been solved thanks to the great guys on the Support Web Chat, they lead me through the resseting PRAM and NVRAM, and now everything works just fine.
Cheers to all.
Zo

Similar Messages

  • HT201317 Photo stream doesn't work wen I take photo,photos doesn't appear in photo stream ?

    Photo stream doesn't work , wen I take photo, photos doesn't appear in photo stream

    Welcome to the Apple Community.
        1.    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
        2.    Photostream only syncs when the camera app is closed, ensure it is closed.
        3.    Photostream only syncs when the battery is above 20%, try recharging the device
    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
    Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

  • Photo booth doesn't work since lion installed

    what's up.  photo booth doesn't work since i dowloaded lion.  Help

    aquaman wrote:
    My mac IS up to date.
    No reason it should have stopped working. Maybe a problem waiting to happen and an upgrade pushed it over the edge. Provide some specs on your Mac, but I would really advise making an appointment at the Genius Bar at your local Apple Store.
    Good Luck
    Pete

  • Photo stream doesn't work on my PC

    My photo stream doesn't work on my PC. I'm signed in, and have photo stream on, but it won't load any of my photos.

    Okay several views and no replies later I did some more research myself and tried something different.
    I reset my photo stream following these directions http://support.apple.com/kb/HT4890
    Then I went into iCloud control panel on my laptop and signed out it told me photostream was turned off and the folder my pictures were stored in.  I looked and saw a picture I took this morning in there YAY.  So I then signed into iCloud again and turned photostream back on and took a picture with my iPhone and now my photos are streaming again.
    Hope this helps someone else.
    Angela

  • After downloading iOS 8, Photo stream doesn't work.

    After downloading iOS 8, Photo stream doesn't work.

    After downloading iOS 8, Photo stream doesn't work.
    In what way? Your MyPhotoStream photos will show in in the Photos.app in the "Recently Added" album, but their is no longer a "My Photo Stream" album.
    If you enabled "iCloud Photo Library Beta" in the "Video/Photos" Settings, disable it. This will prevent the Photo Stream from syncing from your Macs to the iOS 8 devices.

  • I purchased an I pad giving my macbook to my husband.  His photo stream doesn't work but mine still goes onto macbook .  How can I stop that ?

    I purchased an I pad giving my macbook to my husband.  His photo stream doesn't work but mine still goes onto macbook .  How can I stop that ?

    Another item to consider is do you and your husband have your own iTunes accounts?  If so then log out of iTunes on your old Macbook and log back in with your husbands ID and password.  If not this post will self destruct in 10, 9, 8, ......
    OT

  • Help: I have recently downloaded the newest software version for apple products. I have a iPod touch. After the process of updating my software, my photo app doesn't work anymore.

    Help: I have recently downloaded the newest software version for apple products. I have a iPod touch. After the process of updating my software, my photo app doesn't work anymore. I can't take pictures or view them at all. Every time I try opening the app it kicks me out of it and sends me to the home screen. I have tried turning off my iPod and back on multiple times. Even double tapping the home screen button and closing my opened apps. And I tried looking for the photo app in the app store but I did not see it. So I am wondering what can I do? And is this due to the new software update? Does anyone else have this problem?

    No, I have not tried any backup tools. I havent restored my ipod back to factory settings yet and then sync everything back on it. I am kind of scared too because I dont want to lose anything. I have just been hoping some new apple software update will come out because I know several people have had problems when updating to the newest version available.

  • I have a VGA adapter and an iPad2.  Tried projecting my iPad2 to projector using the VGA but doesn't work.  Tried it with friend's iPad1 and it works.  Why??

    I have a VGA adapter and an iPad2.  Tried projecting my iPad2 to projector using the VGA but doesn't work.  Tried it with friend's iPad1 and it works.  Why??  Pls help.

    Yup - nothing happens.  I then took the same VGA cable and plugged it into my friend's iPad1 and it worked perfectly when she opened Keynote.  My understanding is that the iPad2 mirrors the entire screen, so no need to go into any specific application in order to project to the screen, right?  Do I need to download any specific app or change any settings in order to be able to project the screen using VGA?
    Sorry - novice at this.  Not very tech minded either...

  • HT5538 I receive an error message when trying to link my iMessage account to my Apple ID.  My phone syncs fine, just my Macbook doesn't work.  Same issue with Facetime.

    I receive an error message when trying to link my iMessage account to my Apple ID.  My phone syncs fine, just my Macbook doesn't work.  Same issue with Facetime.

    HI,
    In effect this is a DNS block.
    You can do it.
    You need to be in an Admin Mac User Account that has  non blank password.
    Go to the Applications/Utilities folder and open Terminal.
    You should see your shortname (the one under the Little House icon) followed by the $ symbol
    Copy and paste the bold text below into Terminal after the $ symbol.
    sudo pico /etc/hosts
    This will load the file "hosts" into and editor that works in Terminal.
    Use the arrow keys to get to the line with Verisign in it.
    Now type the # symbol and it will be added in front of the character that is highlighted.
    The # symbol is either Shift +3 or ALT+ 3 depending on your keyboard layout
    Now use CTRL and O keys together.
    This Saves the changes.
    Quit Terminal.
    10:02 PM      Wednesday; May 1, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Camera doesn't work on iPad 3 with iOS7

    Camera doesn't work on iPad 3 with iOS7

    Facetime (front side) camera works fine.
    But when I use the camera app for the back side camera I see nuthin' but black and when I try to toggle views the app freezes.

  • Wake up doesn't work After IOS 7 with my Philips clock radio AJ3270D

    Wake up doesn't work After IOS 7 with my Philips clock radio AJ3270D!
    The other function is OK(listen music like an Ipod or charge)
    Can you help me?

    Apple did update their help section on the app. I found this trying to figure out why my Find Friends wasn't working after the update to iOS 7. 
    "Find My Friends is turned on in Background App Refresh (in Settings > General in iOS 7). When Background App Refresh is turned off, Find My Friends can’t use Location Services in the background. If Background App Refresh is turned on, but you quit Find My Friends via the multitasking interface, location updates won’t be sent to your friends until you open the app again."
    Hopefully Apple will update this as it was not this way prior to iOS 7. Killing the app didn't prevent your location from updating in iOS 6 as I constantly killed the apps running in the background and never had this problem till the update. Hope this helps! Just make sure to not kill the app as of now and to tell everyone you follow not to kill their app and locations will continue to refresh. Otherwise it won't update locations till the app is opened again.

  • I have install io6 and now Music doesn't work, sometimes it stay with a blank page with no possibility to press anithing, sometimes it crash. I have match music active with more than 15000 title. Someone could help me?

    I have install io6 and now Music doesn't work, sometimes it stay with a blank page with no possibility to press anithing, sometimes it crash. I have match music active with more than 15000 title. Someone could help me?

    What is your current Flash Player version: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html ?
    What is your display adapter, driver version & date?  See http://forums.adobe.com/thread/945765

  • Photo Stream doesn't work on Windows 7 (64-bit)

    I installed Photo Stream and it just doesn't work. Are there any additional steps I have to take? I see "Photo Stream" icon in "My Computer" but photos are not syncing. iOS 6.1.3, iPhone 4S.

    If you are needing more drivers and Lenovo utilities I suggest you download and install ThinkVantage SystemUpdate. 
    Should you still be missing something after running it I suggest you post what you think is missing, or what you need, in order that other members can assist you.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Adobe Photo Downloader doesn't  work for me

    I've installed the trial version of Lightroom. It installed the photo downloader, which would be fine, except that it doesn't do anything - it never pops up when I insert a card. If I explicitly select "Launch" from its menu, nothing happens. I can't get Lightroom to automatically detect a card insert at all, even the option to pop up the import dialog doesn't work.
    What's worse, is that I also have Elements 3 installed, and this new version of downloader seems to have replaced the one that comes with Elements, so now I have no auto-downloading at all.
    I've tried running apdproxy.exe from the command line after killing the running one, but it doesn't print any useful diagnostics. There's nothing in the event log either. Can anyone help me diagnose this?
    Thanks!

    That happened to me until I did an Import in LR, then the auto-load worked every time after that.

  • Photo sync doesn't work.

    Hi, I'm using iPhone 4S iOS 5.0.1 and Windows7 computer.
    I took a trip somewhere, took picture (JPG files) with digital camera (Canon DIGITAL IXUS 110 IS) , and I want to send photos to my iPhone.
    But It doesn't work. And no error codes. Just iPhone says some photos cannot be synced.
    When I start syncing, syncing speed getting slower and iTunes stops syncing photos at some points. For example, it stops syncing after sync 51 photos. sometimes 40, 60...
    But I want to sync many many many photos. over 1000 photos
    I looked over this site and deleted iPod Photo Cache folder, but it doesn't solve my problem.
    I looked in iPod Photo Cache folder and I found .ithmb files are almost 0byte, except 51 .ithmb files if iTunes synced 51 photos successfully.
    So, I think there is something wrong at iTunes makes .ithmb files.
    PLEASE HELP ME!
    P.S. I also have changed directory, but it also didn't solve my problem.

    It seems to be size related as far as I can tell; I've had no issue getting 2592x1944 pictures (typically around or under 2Mb each) to sync but photos from a newer camera shot at 5184x3456 (usually around 5-6 Mb) won't. I was going to play around with resizing some of my library but haven't gotten around to it yet.

Maybe you are looking for

  • Pop-up menu cellspacing in IE but not Firefox

    I created a website a while back using Dreamweaver and managed to install the header I created in Fireworks CS3 with no problem, however I am redesigning the site and when I place my header in, there appears to be cellspacing in my pop-up menu, but o

  • Password in my Yahoo Acct is incorrect. How do I change it.

    On my iPad (original) the password in my Yahoo Email Acct is incorrect. How do I know???  Here is the procedure I took:  Went to  "Settings" / "Mail,Contacts,Calendars" / "Yahoo Acct" / "Account".... Name/Address is correct. Password should have 7 do

  • Why can't I read a .docx file?

    I have an iPad running iOS 5.0.1 and I just received an email with a .docx attached.  Whan I tap on it, it tries to open only to get a message that it can not read this kind of file.  It can however read a .doc.  What's up with that?

  • Dock disappears when i hover the mouse on it

    Brand new 27" iMac, the dock dissapears when I hover mouse over it, making it impossible to open apps. I have to open via mission control...any ideas folks??

  • Add new virtual characteristic in report writer

    Dear gurus, I would like to add a new virtual characteristic 'ZZWKDT' (work done date) so that I can filter my report with this selection criteria. This field has been added to structure "CI_CCR1S". But I don't have any idea on where should I code my