Photo gallery not displaying after site is published to .mac

I would like to thank everyone who reads and responds to these posts. I would be completely lost without it. Apple is lucky to have such great forums. That being said, I need help again...
I finally (thanks to much help) got both my websites up and running without interfering with each other in the publishing process. Now my second website http://web.mac.com/dkeesey01/CAAHA/Welcome.html or www.caaha.org is up but the photo gallery won't show. I published to a folder and it works fine, but it won't work in safari, firefox, or internet explorer.
Thank you!

Update iWeb to 2.0.4. It will solve a lot of problems.
Then do *Publish all to MobileMe*.

Similar Messages

My photos are not displaying after upgrade to iOS 7, My photos are not displaying after upgrade to iOS 7

On our ipad 2, after upgrading to iOS 7, the photo album is completely screwed, and the saved photos are not displaying correctly. How do we get our photos Back?

OK, tried the reset and it seems to have cleared up some problems; however, the picture problem remains.
Maybe there is something further we could do in settings? My wife uses the iPad as her constant companion and likes to take screen shots (pictures) of recipes and such. She keeps them in albums. Before the update to iOS 7 they all displayed correctly regardless of physical machine orientation. Now, post update, when in landscape mode, which she uses 99.9% of the time, her pics do do fully display. By physically rotating the machine, they will appear correctly. We have noticed that there is a new "function" in edit pics for "aspect ratio."
Should we be using this? If so, she'll have to edit a very large number of pics. So I'm wondering if we're missing some new setting. BTW- this display problem also occurs with pics taken with the camera as well.

Photo gallery not displaying when published to .mac

Hey,
I'm having some trouble publishing my photo gallery. I do not want to publish it as a web gallery from iPhoto then link to it with iWeb. What I want to do is to send a gallery from iPhoto into iWeb, and have it published as part of the website. When I send a gallery over to iWeb, it loads up great, and I have all the functionality that one would expect when doing this so by all indications, it will load up great on my .mac account. When I publish the website, it does say that it is publishing the photo gallery page, but the issue is that none of my galleries ever show up! I do not know what to do, I have tried completely deleting the photo gallery page and remaking it in case I did something wrong in the design somewhere, but it still does not load up. If I link in a web gallery, it does show up, but, again, that is not what I want to do. I am at a loss for what may be causing the error. Any help at all would be greatly appreciated.
Thanks!
Heather

Publishing a iPhotoalbum to iWeb is the same as dragging the album from the media browser to iWeb.
When I send a gallery over to iWeb, it loads up great, and I have all the functionality that one would expect when doing this so by all indications, it will load up great on my .mac account.
When I publish the website, it does say that it is publishing the photo gallery page, but the issue is that none of my galleries ever show up!
What is it? Does it upload great to dotMac or doesn't it?
There's only one thing to do. Publish it. No need to upload. iWeb takes care of that.
It helps if you provide a URL to said page.

Svg background tile not displaying when site is published

Hi,
I have a few pages with an SVG tile graphic in the background (that makes a stripe pattern). Inside the Muse Application these all preview fine when viewed with the browser page preview inside Muse. However, once I publish the site as HTML and upload it to the web, the tied SVG graphic has disappeared.
But other SVG graphic such as Logos and icons all display fine. So I'm a bit confused.
Any suggestions?
FYI This issue seems to be the same in Safari, Chrome and Firefox.
Cheers,
Robbie.

Hi Robbie,
Does that SVG background appear OK, after you view the locally exported HTML version of the site before uploading it to server.
Also, could you publish this site on a trial new business catalyst site by hitting Publish button, and check if that looks fine, just to separate this issue from the server side or Muse side.
Thanks.

Photo's not displaying after upgrade

It appears that iPhoto is recognizing my photos as it tells me how many I have (and how many events), but the thumbnails don't show (just a place holder). If I double click on a thumbnail place holder, I get a large pixelated exclamation point.
When I start iPhoto, I get the message "rebuilding thumbnail caches" and a status bar which quickly ends.
My library is where it was with iPhoto 6...in the shared folder with a link to it from the pictures folder.
any ideas? thanks

Roger:
Since rebuilding didn't resurrect the library you may be looking at starting over with a fresh library and importing the original photos from the old library like this:
Creating a new library while preserving the rolls from the original.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
To help prevent this type of loss in the future see the tip at the end of my signature.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Firefox 3.6.14 is not displaying any site styles correctly on Mac OS 10.6 with Flash Player 10.

I’ve spent some time researching this problem. These are things I’ve already tried:
- updating Firefox, restarting browser
- clearing cache, restarting browser
- updating to Flash Player 10, restarting browser, clearing cache, restarting browser
- restarting computer
- making sure View > Page Style > Basic Page Style is checked
- making sure no custom minimum font size is set
- javascript is not being blocked
- disabling addons
Note: All sites appear as normal in Safari.
Thank you!

Thank you again, but the immediate above links did not resolve my problem. However because of the provided links, I meandered my way to a section of the support area that mentioned a file may have become corrupt in my Firefox profile. I created a new profile as suggested and the problem is solved!
[[http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile| I created a new profile by following these directions.]]
Before I created the new profile, bookmarks were easily backed up through Boomarks > Organize Bookmarks and selecting the Backup option. This same menu was used to “Restore” my bookmarks by choosing the backup file and bringing it into my new profile.
Ahh... beautiful Firefox, how I’ve missed you.

I Photo will not update after migrating from old I-Mac to new I-Mac with fusion drive

I just migrated from 2009 I-Mac with Mountain Lion to New I-Mac with Mountain Lion with migration Assistant. Now... I tunes will not update although Apple says one is available

a couple of things - you should not "migrate" applications - you should use the new ones that come preinstalled - what version of of iPhoto do you have on your new mac?
Migration assistance does not handle the iPhoto library well sometimes - the best way is to drag the bad iphoto library from the pictures folder on the new system to the desktop, connect the two systems together (network, firewire target mode, etc) and drag the iPhoto library intact as a single entity from the old system to the pictures folder of the new system and launch iPhoto on the new system - it will open and convert the iPhoto library as necessary and you will be fine - once you test the iPhoto library you can delete the one on the desktop
LN

Photo Gallery not opening

<< Branched from an old discussion about photo gallery not opening >>
I had a similar problem, only it was because i was in the phone deleting files that i thought i didnt want. UGH! I think mine was due to facebook and not syncing. My gallery would work, but the widget on the homescreen seemed frozen and when i tried to look at picture thru it, it said there was an error.
I deleted facebook and then installed it again, somehow, getting better updates. I also took the widget off the homescreen for a little bit. After a reboot of the cellphone, and an update of facebook and new SYNCS, suddenly it is working again as it once did.
I did NOT want to do a hard reset, it took along time to tweak my settings as i wanted them, so i opted out of it.
Hopefully you have better luck than i did. It took me like a week to figure houw i was going to go around doing a hard reset.

sorry, i forgot to say my firmware version is v3.0638.0.0.1

Navigation & Photo Page not displaying within some browsers

Hello,
I am using iWeb '08 and am having great difficulties trying to get my site cross browser compatible. The site is working perfectly on the Mac in Firefox 2 & Safari but not Firefox 3. It is also not displaying correctly in Firefox 2.0.0.13 and IE7 on my WinXP machine. Unfortunately the error is not just a cosmetic issue. The Main Navigation is not displaying on any page and only shows a bullet point where it is meant to be. The other error occurs in the Photo Template and the photos are not displaying. I am using a "Version 1 template" and did a test with a "version 2" template that provided the same errors.
Has anyone else had these problems???
The site is located at:
http://web.mac.com/maxkit/Kai/
Photo Page:
http://web.mac.com/maxkit/Kai/CurrentPictures/Pages/Snowy_AprilDay.html
The test site is located at:
http://web.mac.com/maxkit/Site/
Thanks
Max

You have applied a height of "auto"to your menubar container, which gives it no height at all in some browsers. If you have a clue what height you would like to display for your menubar, give it, instead of:
    <div style="height: auto;" id="p7PMM_1" class="p7PMMh04">
Better yet, leave it in the CSS file, where you will find it when you go looking for it. You already assign a height there:
.p7PMMh04 {
    width: auto;
    height: 20px;
    margin: 0 auto;
    font-family: Arial, Helvetica, sans-serif;
    font-size: 11px;
    font-weight: bold;
    background-image: url(http://home.roadrunner.com/~jgigandet/trinity/img/new_bk.gif);
    background-repeat: repeat-x;
    background-color: #000;
    text-align: left;
    line-height: normal;
Because your inline style of height:auto; has more proximity (is closer) to the element being styled, it overrides the style in the stylesheet and applies the height: auto; instead of allowing the height: 20px;
Beth

ICamera photos are not displayed in iPhoto

HI!
I have a big problem: Whan I make photos with the included camera in my iPad,
these photos are not displayed in the iPhoto app supplied with my iPad. I can't find
them.
I'm using IOS 5.0.1.
Any help? PLEASE!!!

After you snap the photo with the iPad, and that picture shrinks down to the corner, you should ba able to tap that little picture - and it should open in the Camera Roll in the Photos app.
I'm not sure what to suggest other than the basic, first try, troubleshooting steps.
Quit the camera app and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Thumbnails do not display after using rebuild tool

I am using OSX 10.7.5, and iPhoto 8.1.2.
recently I made a back up copy of my files.
I then reinstalled my operating system.
I then copied my iphoto library back onto my computer.
imported my iPhoto library into iPhoto
Pictures are in iPhoto.
Thumbnails do not display.
I have used the rebuild tools provided by iPhoto.
Still no thumbnails displaying.
any other ideas?

It relates to your suggestion in that, the reason I posted was to solve a thumbnail issue.
"re: Thumbnails do not display after using rebuild tool"
Terence suggested reloading my back up library.
I asked Terence where I should import to.
I was thinking that my thumbnail issue was related to the way I imported my back up.
You clarified where to import the library...
I tried it and I still have no thumbnails
I have already tried repairing permissions and rebuilding thumbnails using the i photo repair tool.
can you help me?

Photo Attachments not Displaying in Gmail

I'm using an iPod touch 3rd Gen 32GB to check my Gmail over wifi. I received an email with two photos today and the photos are not displaying on the iPod. I see a question mark in the center of the space for the photo. I can't find any settings for this. But, I'm new to this so i may be looking in the wrong place. Any suggestions to get this to work?

Hi All,
I am facing the same issue w.r.t Photo Display in MSS General Information.
Whenever i logged into MSS General info its asking ECC system Credentials to Display the Photo.
it showing the Error like
SAP ArchiveLink: Data Element for Absolute URI
can you please give me the solution
Earlier its asked me the credentials in ChangeOwnData - PhotoDisplay, but after FQDN,its not asking any Credentials. Photo is Displaying fine in COD Service in ESS.
Please suggest me the solutin for Credentials asking in Photo Display in MSS..
Thanks in Advance
Adapag

How does one add a photo gallery to my web site in Dreamweaver CS5 and have the link recognized as a destination file?

How does on add a photo gallery to a web site in Dreamweaver CS5 and have the file folder which contains the photos, recognized as the "go to location" for the link up?

Ok. So Photos1.htm is the main gallery page.
And it looks like you have sub-folders with images in them like these from 2011 and 2010
LLA Picnic 2011/
photos 2010/
Have you defined a site in DW yet? That's a critical first step in getting DW to recognize your site's links and other assets. See video below:
GS-01: Defining a new site | Learn Dreamweaver CS5 & CS5.5 | Adobe TV
Nancy O.

Oem web page will not display after O/S dst patch

Hello,
The Grid web page will not display after we DST patch for the o/s.
All below start fine without any errors:
emctl start oms
emctl start iasconsole
opmnctl startall
emctl start agent
The Grid web page is not displaying. What might happened after the o/s dst patch that might cause this? Our GRID is 10204 with a 10104 repository. The 10104 has not yet been dst patch.
What logs should I be looking at to figure why the web page is not displaying? Thank you.

Provide the output of these comands:
$OMS_HOME/bin/emctl status oms
$OMS_HOME/opmn/bin/opmnctl status
$AGENT_HOME/bin/emctl status agent
$DATABASE_HOME/bin/sqlplus "/ as sysdba" << EOF
SELECT STATUS FROM V$INSTANCE;
EOF
$DATABASE_HOME/bin/lsnrctl status LISTENER_NAME
Regards

Safari will not display flash sites

safari will not display flash sites? Instead it will show a small box that says "flash" and once you click on it, it then displays the flash site!!
Any ideas as to why this is happening?
I am running .....
Vendor: Oracle Corporation
Version: Java SE 7 Update 25
and
Flash Player: 11.8.800.94

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

Photo gallery not displaying after site is published to .mac

Similar Messages

Maybe you are looking for