Photo getting cut off when printing

I am trying to print a 6x4 photo with my HP Photosmart B8550.  Everytime I go to print it, it cuts off part of the picture.  I created the picture in Photoshop at 6x4 and saved it as a jpg.  In the preview it shows up fine but it is NOT right when it prints.  Please advise.

StephF wrote:
I am trying to print a 6x4 photo with my HP Photosmart B8550.  Everytime I go to print it, it cuts off part of the picture.  I created the picture in Photoshop at 6x4 and saved it as a jpg.  In the preview it shows up fine but it is NOT right when it prints.  Please advise.
The edges of your image will be cut off by a printer that can’t print all the way to the edges of the paper. In order to prevent this, go to the Image Size menu again and decrease the height by 1 inch (thus also reducing the width). When printed, the image will be centered on the paper. You can also choose “Scale to Fit Media” In Page Setup.
Although I am an HP employee, I am speaking for myself and not for HP.

Similar Messages

  • Text getting cut off when printing to PDF from Excel

    Hello,
         I've seen a lot related to this subject but nothing that shows a real solution.
         Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
         It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
         Any assistance is appreciated.
    Thanks,
    Kevin Murphy

    please delete me from your mailing list.  tks.
    Date: Wed, 10 Feb 2010 11:20:28 -0700
    From: [email protected]
    To: [email protected]
    Subject: Text getting cut off when printing to PDF from Excel
    Hello,
         I've seen a lot related to this subject but nothing that shows a real solution.
         Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
         It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
         Any assistance is appreciated.
    Thanks,
    Kevin Murphy
    >

  • How do I get my watermark not to get cut off when printing from aperture?

    When I export an image that I have put my watermark on and print it the water mark gets cut off in the printing

    Aperture should scale watermarks down to fit the exported image.  Perhaps it is scaling to one dimension and not both?
    Have you tried resizing your watermark?  I suggest creating a watermark for each commonly used export size.  I use a wide and not tall watermark, in these widths (in pixels):
    - 320
    - 640
    - 1024

  • Brochure template right-side edge gets cut off when printed

    its horizontal set-up, 8.5x11.0. but on both my printers (both HPs) the right edge gets cut off. how can I manipulate the doc to a smaller size without making the formating go cattywampus?
    comments are hidden (that helped a little)

    With my DeskJet there is an option to "scale down" a document to fit the page. Do yours offer that?
    Also, I apologize if this idea is too hokey, depending upon the nature and extent of your printing project, but would it be acceptable to set up your printer for legal-size paper and then trim the hardcopies?
    MacBook Pro   Mac OS X (10.4.9)  

  • Image gets cut off when printing tiles

    My InDesign file includes an 8" x 28" page containing a full-bleed image that prints as 4 tiles of 8.5" x 11".  Whenever I print, the image does not print on the first tile. The foreground text and vector graphics print fine. The image is a PSD, but I've also tried flattened TIFs and JPGs with the same results. Even if I make the page twice as big so nothignbleeds, the image doesn't print on the first tile that should contain the image.
    Any suggestions? Thanks

    Thanks for the ideas.
    I thought about printing from a PDF, but I couldn't find a way to print tiles in Acrobat. I'll see if I can print to tiles as a PDF. I also will see what happens if I place a PDF into the InDesign file, then print that.
    I didn't log in as a different user, but I did open on another computer, with same results.
    Never heard of .inx, but I'll try that too.
    Some new twists:
    1) When I flip the page orientation upside-down in the print dialogue box, the opposite happens - the last image tile doesn't print.
    2) Today I printed the page at 50% and it worked fine with all image tiles printing correctly.

  • Bottom margin gets cut off when I try to print

    bottom margin gets cut off when I try to print

    Not being able to check it out on Pages 5 I have tosay how it works in Pages 4 (09). When Show Layout is checked/on you should see a grey border which is the area that the printer can't print on. Do you see a grey boder in your Pages 5?
    If you need a smaller margin on your document than the printer seems being able to do check if you don't hae a "borderless" option for the paper sizr you use. You check it in File > Page Setup
    Also go to HP and check if there is a newer printer driver if yours has some years on it.
    I hope this will help you

  • Titles get cut off when playing after the burn

    The title created in the movie are too wide and get cut off when playing it in a DVD player into a TV. Is there a setting I should use before burning?
    Any help is appreciated.

    You should turn on the TV Safe Area and make sure that everything that you care about is within this area. Anything outside the area is subject to the over-scan of TV sets.

  • Why iphone centre in malaysia always get cut off when i call.

    i always get cut off when i call iphone centre on malaysia,
    need explaination from centre.

    so why are you asking us users?  That makes absolutely no sense at all.

  • When i print my edited photos in a 4x6 or smaller parts of photo get cut off how do i fix this?

    I have my edited photos burned to a disc in jpeg file...when printed in 4x6 or smaller they get cut off...it acts as if my photo is too big for a 4x6 or smaller...how do i fix this? its for my photography business and when i give my customers the rights to the photos on disc they are upset they can not print 4x6 or smaller

    And you're asking about the problem in a PSE forum???
    Go tell it to Kodak....
    Ken

  • Why do my margins get cut off when I right click print, but not when I open my document and print?

    When I right click print (without opening the document) my margins get cut off, but if I actally open my pdf document and click print, it will print just fine.  This only happens when the document has print that is close to the edge.
    I am using Adobe 10.1.2 with Windows 7.
    Thank you in advance for your thoughts and help

    As for your comment on this being my first Mac, and the program issue, you misunderstood. Yes the eMac is in fact my first, personally owned, Mac computer other than the original Apple II series floppy fed PC, in which me and my father owned. The only other Apple/Macintosh computer I had experience on was my father's 13" MacBook Pro, and 20" iMac (both ran OSX Tiger 10.4.11, just as the one I have know runs). The iMac was upgraded to Snow Leopard due to our need for better picture/video/audio editing software such as that of Adobe, and the Macbook Pro was sold because of a business that was started being siphoned out of money. I purchased the eMac from a small business based off of eBay. It had the majority of OSX Tiger software, only missing minor programs like Photobooth. Other than that, it had no wireless software like BlueTooth, Wi-Fi capabilities, wireless sync, ect... But alas, when you buy a Apple/Mac computer, you must take a few cutbacks when purchasing it (even refurb.) for around $120.00 including taxing, shipping, handling, ect... I purchased nearly all of my software from co-workers and friends who had an extra key, or I would receive the software disc from them, and buy a key. The only "illegal" thing I had on the computer was music I had downloaded from LimeWire. I have never, and will never, trust any software coming from a torrent download site.

  • Notes cut off when printing, issue with margins

    When I print a slide with notes, the notes complete cover the width of the page, flush left and right. My printer cuts the margins automatically (not a bleed), so those portions of the text in the notes gets cut off.
    Any way to control the margins, left and right, when printing notes from Keynote?

    Keynote print layout is a bit of a mess, and is well commented on by users, it prints differently than previous versions, eg  in handouts the slide image is much smaller than previously, in grid, the slides are off the printable area on the left.
    We are hoping this is fixed in the round of scheduled updates.

  • Text gets cut off when exported to PDF

    When I export my report to PDF some of my text gets cut off where it would meet the right edge of the text box by 1 or 2 letters.
    This only happens when I export to PDF through my web application or when I export it throught the Report Manager URL
    If I export it on my local copy of SSRS then it shows up fine without the text getting cut off

    Hi,
    You can set the Cangrow property of the textbox to true which allows to grow your textbox and is default for any text box unless you have changed it.
    Please mark this post as Answered if this post helps to solve your query.

  • CS5 Text still gets cut off when using filters

    In Flash CS4, I encountered a strange bug where text would get cut off if there were any filters applied to the text box. I was so excited for CS5, because I had heard that bug was fixed. Now I see that it is not.
    I'm using Classic Text in an Actionscript 2.0 file. Here's a screenshot to demonstrate what I mean. The top line is text with no filters applied. The middle line is text inside a movie clip, with filters applied to the movie clip. The bottom line is text with a drop shadow filter applied directly to the text box. Why does it cut off the end of the text???
    Has anyone else experienced this?

    Hi,
    You can set the Cangrow property of the textbox to true which allows to grow your textbox and is default for any text box unless you have changed it.
    Please mark this post as Answered if this post helps to solve your query.

  • Why are my photos getting cut off in IOS 7?

    Hey does anyone have this similar problem that I am experiencing with the IOS 7 update. I have quite a bit of manga on my ipad and prior to the update, the photo would scale perfectly on ios 6 without any use of recroping or resizing meaning that I use the original sacling of the picture but with the recent update, I have noticed that the photos are enlarged and the scaling is off the point where the text bubbles at the top,side and bottom portion of the photo are cut off. This also only occurs in the portrait rotation and this never happened before in iso 6.  Just to clarify, this is not for wallpaper setting but rather reading manga through the photo tab. I would like to keep the original scaling as it was never a problem on ios 6 but I was wondering if anyone has a solution for this or is it just a bug that I have to wait for apple to patch through. Thank you and waiting for replies.

    jstanford88 wrote:
    Is there something wrong with iTunes right now?
    It would seem that way...
    If you haven't already done so clearing caches and disabling the "Allow simultaneous downloads" option in the downloads window may help.
    tt2

  • HP Laserjet P1102w - Right side margin cut off when printing in Internet Explorer 9! URGENT PROBLEM*

    Hi,
    I have just purchased a new printer (HP Laserjet P1102W), and when I print a web page in Internet Explorer 9, the footer (I set to the URL) does not print at all and the header will print though the right hand edge of my entire web page is cut off (including my top right header - Pages ? of ?).
    I always use Print Preview first, and in the print preview it looks perfect. I always tick the box to enable shrink to fit too. Why will it look perfect in 'Print Preview' but yet when it prints, it cuts off the right hand side edge of the page and doesnt print the footer?? I have tried adjusting margins, etc... all to no avail.
    I would like to check whether others have this same problem?
    I spoke to HP (UK Printer Support) and they said it is Internet Explorer 9's problem. I have left a message on the Microsodt Web forum which you can see here. http://answers.microsoft.com/en-us/ie/forum/ie9-windows_vista/internet-exploer-9-not-printing-header...
    I am hoping they may release a patch / hotfix - but this has to be affecting many other users of this printer too? The more of us that complain, the quicker it will get sorted.
    Any others with the same problem?
    Thanks.

    I spoke with Microsoft technical support via phone today. Between us - we seemed to have found the problem.
    It's to do with the DPI (the font size) settings in Windows!?
    I have mine set to 188% on my Windows Vista mahcine and 200% on my Windows 7 laptop.
    From my Printing tests in Internet Explorer 9...
    at 100 % DPI – it prints perfectly
    at 150% DPI – it prints perfectly
    at 200% DPI – the right side of the margin is cut off, and no footer is printed – despite it looking perfect in the Print Preview.
    I am using http://uk.msn.com/ as my test print outs.
    This indicates when the DPI is changed above 150%, IE9 doesn't print properly – though other browsers like Safari or Firefox do print correctly. This surely has to indicate a bug in either the Windows operating system or Internet Explorer 9?
    Microsoft are going to run their own tests and phone me back tomorrow...hopefully with a solution!
    Hope this helps any others with the same problem at the moment!
    Would be great if HP could provide a soloution asap - surely a tweak to the Printer dirvers will fix the problem?

Maybe you are looking for

  • Unable to update SQL in SQL developer

    I suddenly started having issues with my SQL developer no allowing me to update my SQL. I can open an existing .sql file or create a new one but it isn't responding to some of the my keyboard strokes. I can type new text but it doesn't respond to the

  • IW32 change of user status

    Hi, In Plant Maintenance orders to help users to manage the work process of user statuses, When we open the order using tcode IW32, we should be able to set the userstatus to JBDN, but it should not get reversed from JBDN to any other previous status

  • Manual Check Creation

    Hi I am trying to create a manual check for my Vendor ABC.  I am giving the external document # while creating the manual check. But the error message says "Document 1234 doesn't exist in company code CCCC year 2007"  What could be the probable reaso

  • Essbase Studio SQL Query Doubt

    Hi All, Can some on explain me what does the below statements mean realted to Data Load SQL Override Editing "If a member is prefixed with previous members of its dimension (for example, parent or all ancestors), more columns are returned. ● If some

  • AIR 3.0 & rendermode

    If I try to run my AIR 2.0 app (which is configured to use gpu mode in the app descriptor and which opens a new NativeWindow) under the AIR 3.0 SDK, I automatically get a Error: Error #1508: The value specified for argument renderMode is invalid.