Photo images from dig. cam [one is error and other won't open] questions
My wife inserted the sd card in the card reader and copied about 70 photo image files to the Mac. The camera that took all the 70 photos was a Panasonic DMC-LZ5 but I don't think the camera model matters much here.
For the first time, 2 of the many images seem to be corrupt. Mac X reports one photo image has an error while trying to open and reports the second image won't open.
My main concern is whether or not to just delete the two error/corrupt jpg images. My other main concern is that I don't want to keep the two images if it could affect or corrupt my hd or Mac system in some way.
I normally just trash corrupted files; however, in this case I went ahead and attempted to open both of the 2 troubled files myself later and they both opened up in Preview and didn't report any error or corruption. However, one of the jpg images defintely is corrupt when viewing it as the bottom of the image is definitely messed up. However, the other image now opens perfectly and looks fine to the eye as if nothing is wrong with it.
Here is a link to the one photo image that isn't quite right [note the obvious distortion at bottom of image]. Link is http://mysite.verizon.net/vzenvo78/question595.jpg
Further very relevant information: The SanDisk sd card that all the 70 images were on is a 1 gig card and the sd card seems to be a total loss. The sd card can't be initialized/formatted by disk utility and furthermore the sd card is no longer recognized by the Panasonic camera - the Panasonic camera won't even preview the images off the card or allow me to format the card even from the camera.
Hello,
I see what you are talking about. I just discovered this same exact problem on a friends G5 after he uploaded pics from his Leica.
This is what I did: I ran Disk Utility from the system restore disc to verify and repair the drive. DU reported Volume Bitmap problems. DU was able to repair the disc. Next, I created a new user account and tried uploading the images from the camera to the G5 and it worked just fine. The images loaded like they should.
I also reinstalled the drivers that came with the camera.
Delete any files that your Mac reports as a problem. It's just not worth leaving them on the drive.
So...... run Disk Utility from your system restore disc. If it reports errors, hopefully DU can repair them. If not, one option is to get DiskWarrior here:
www.alsoft.com or TechToolPro4 here: www.micromat.com
One other idea is how old is the card?
Next idea is to create a new user acccount: System Prefs/Accounts. Try using that account to upload the same images. See if they upload as they should. If they do, then the issue isn't system wide, it's just in the other user account.
Remember to always back up your images/audio/data often as you never know when you might need to do either an Archive or Erase and Reinstall.
Carolyn
Similar Messages
-
Is it possible to have two USB drives for the IPad? I want to bring RAW files from my camera through the IPad and out to an external hard drive. One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line. Realted to this, I bought the IPad camera accessory. Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive? Can I put Lightroom or the Nikon photo editing software on the IPad? Right now I carry a PC laptop and external hard drives with me on wildernes trips. Internet and WiFi are not available. Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad). I have Nikon NX software and lightroom on my PC. I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips. Is this possible and how would I do it? I'd appreciate any guidance.
No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom. -
I am new to Mac and am having trouble up loafing images from my pictures folder to photography sites and Facebook. Some of the saved images are accessible, while others are not, ( they are light colored and cannot be uploaded) I am not saving them any differently.
Hi Robodisko,
Thanks for your prompt reply......
I often proof my work in preview then edit images in photoshop and rename from there. The dsc images are renamed to correlate the name of the class etc. i.e. dcs_001 is saved as the file name required 7A.jpeg etc.
The file names are required to correlate what is what and so on.......... -
I open an e-mail, click on a link, and sometimes it will open, other times it won't. If the website is given in the e-mail, I can copy and paste the site into Firefox, and it will usually open, but I want to know why a valid link won't open. Other times, I will enter an address in Firefox and I get "done" at the bottom, but I'm looking at a blank page. I'm not a technician, just an operator, so it may be a setting somewhere in the millions of settings that are default or that I have changed, but I have no clue what is causing this. Another problem that only occurs with Firefox is that if I am filling out an online shopping cart, when I'm done, there is no button to click to finish the transaction. I have to open IE, go to the same site, make the same order, and the "submit" or "order" button is there. Why in IE and not in Firefox? Any help would be most appreciated.
OK lets engage the brain here. A car is warranted from the maker of the car through the dealer that sells it.
That warranty is clearly spelled out. 3 years parts and labor, 5 year power train, 10 rust through etc. It tells you how to obtain this warranty service.
Find the warranty service conditions on Verizon Wireless and READ them.
Now you go to Best Buy and buy a Television and hook it to cable vision or Fios and it breaks down and you want the company you get TV service from to fix it? Please get real.
If you bought the device from Walmart or Best Buy or any major retailer they give you 15 days to return a defective unit. Then after that time it spells out your options. One of them is not to bring it back to them. They don't repair devices.
Now Verizon Wireless is also a retailer, they give you 14 days to return it and after that they will assist in the warranty of the device through the manufacturer. Verizon does not make phones nor repair them.
There is no customer courtesy outside of issuing a refurbished device if not physically broken and you send the other one back to complete the warranty process if under a year. If you have supplemental insurance then you go through asurian. That is pertinent information.
Just because you don't like the reply does not make it correct.
The updates come through Google, then HTC (Or other device makers), then to Verizon to push out to the devices. Verizon has nothing to do with the code of the update, nor anything regarding the devices. They provide a service of which is cellular and data services. If the devices cannot work on their service Verizon Wireless is not to blame.
Good Luck -
Did anyone experienced the same problem and how did you solve it?
http://www.quickoffice.com/quickoffice_pro_hd_ipad/
File support: Edit (97-2008) DOC, DOCX, TXT
This is curious that it doesn't support new versions of word.
I have to take a guess here. Perhaps it was in docx not doc format.
Send the email to some computer & convert it to doc format.
See if the document converter will help.
http://www.microsoft.com/download/en/details.aspx?id=3 -
It just started happening out of the ordinary. I had a photo shoot done today. I came home plugged my camera usb to my mac lap top and tried to import my raw files as i usually do into light room 5 to edit my images. This time the same error message popped up stating it couldn't read or my files weren't found over and over again. Neither the new ones nor the old pictures was able to import them. Please Help!
I just bought Lightroom and have the same problem - MacBook Pro with OS X 10.10.1. LR actually displays the photos properly when previewing but fails when starting the import. Also, a couple of times it would start but would hang up. I think it may be a Yosemite problem. I was having trouble importing with Aperture too. The fail message from LR was:
The following files were not imported because they could not be read. (6)
IMGP7941.JPG
IMGP7942.JPG
IMGP7944.JPG
IMGP7943.JPG
IMGP7945.JPG
IMGP7946.JPG
I can copy the folder from the camera to my desktop and then import. That works but of course I shouldn't have to do that. -
I am downloading from a Canon 650d TO Photoshop CS5.1 and Adobe Bridge CS5.1 Do i need to download a DNG convertor? if so how do i get the images from the camera to the convertor?
Please check the list yourself and co,mare the necessary CR version with the one your version of Photoshop utilizes.
If the version os higher than yours you can use the free DNG Converter – as to how to use it please read up on that.
Camera Raw plug-in | Supported cameras -
When iPad connected to Mac Pro, images from iPad camera auto open Aperture
Hi, When open Mac Pro with i Pad connected, Aperture opens atomatically with images from i Pad camera. Checked systen prefs for Mac & Aperture + U tunes for iPad prefs, but cannot find way to stop auto open of Aperture. Help!!!
Look in the application Image Capture on your Mac. In the preferences for Image Capture there will be a setting to choose which, if any, application to open when connecting a camera to your Mac. Change that setting to open nothing.
If you want Aperture to open when you connect your camera to the Mac and it continues to open when you connect your image then just quit Aperture after it opens and then start iTunes.
Any time there are photos in your iPad's Camera Roll. Your Mac will assume you'll want to upload those photos to your Mac. -
Imported photo's from my camera, and after making adjustments to the photos in iPhoto an error message appeared and now in the events box, there are no pictures just a gray and black palm tree photo. Any thoughts?
Sure - tell us the error message
LN -
Lightroom 1.4 won't read RAW images from my camera
I upgraded from a Canon Rebel XT to a Canon 1000D (Rebel XS), and it won't read RAW files anymore. When I try to import a RAW file, it says "file appears to be unsupported or damaged."
I've read that I can download a plugin to solve this problem, but I'm not having much luck. I've downloaded Camera Raw 5.2, which says that it supports the Canon XS, but it's still not working. Perhaps I've installed it incorrectly? Please help. :)Correct me if I'm wrong, but another workaround for this common issue of trying to use RAW images taken with a newer camera than is supported by the version of Adobe software you have may be to use Canon software included with the Canon XS to import the Canon RAW images to your PC's hard drive, and then import them using the Adobe software. If they're still not recognized by LR, you'd have to first convert them with Canon software to another format such as TIFF or JPG, which of course, besides being a nuisance additional second step, loses the advantage of having taken the photo in RAW to begin with, though you could do basic white balance and exposure corrections with Canon software on the RAW files before converting.
If you'll be using a lot of XS RAW photos in Lightroom, it's probably worth the hundred bucks to upgrade to LR2 which most users feel is much more powerful than LR 1.4 anyway and therefore worth the charge. The adjustment brushes, graduated filters, and improved sharpening make the upgrade worthwhile, and then LR could import your XS' RAW photos directly from the camera. However, *if* your PC is barely managing with LR 1.4, you may find LR 2.x too slow for your PC. You can try LR 2.x first for a time for free before paying for the upgrade. Check out the video tutorials on the upgrades because their use is not intuitive and you may falsely conclude they don't add much function if you don't learn how to use them. -
After downloading some 60 images from camera to iPad, I was "scrolling" down to select the last images, and inadvertently touched the "Delete" button that appears at the top right of the screen, when the "Select" option is chosen. I did not notice the warning "Delete 60 Images?", and continued scrolling down, when my finger touched the warning message. All my precious images were instantly deleted from the camera The sensitive touch screen feature makes this a real problem. Apple should "fix" this unacceptable feature, surely! I suggest that the images on the camera memory card should not be able to be deleted from the iPad, and this shpuld require to be done using the camera controls only. Similarly, the "Delete" or "Keep" options that appear after importing a selection from the camera, should NOT allow the images on rthe camera to be deleted, but only the imported (downloaded) images on the iPad. This unnecessary option could easily delete precious images from the camera!
Apple should remove the option to delete images from the camera, and the iPad touch screen commands should olny delete images on the iPad. (Alternatively, the "delete option should be on a separatly accessed "page".)
Surely enough users of the "Lightning to USB Camera Adapter" will agree with the above?No, I don't agree. Whenever you connect a camera to a computer you are given the opportunity to delete the photos on the camera after downloading in precisely the same way the iPad does this. The fact that you touched Delete and then ignored the Warning doesn't change anything.
I've loaded thousands of photos on my IPad and never have had that problem.
Don't blame a moment of carelessness on your device.
If you want to make such a suggestion to Apple use http://apple.com/feedback -
How can I download automatically only new images from my camera?
Hello,
I can not download only new images from my EOS 450D-camera with Elements 10-Photodownloafer (Mac os).
Each time I use Photodownloader it downloads all images , also those that were downloaded preveously
How can I set photodownloader?
Thanks for your advicesI share my card with my wife and she likes to download our images also on her PC, so erasing all images is not an option.
It seems that earlier version of adobe photo downloader has the feature "copy only new files" , but V10 does not.
Thanks for your answer
Mikele
Op 10-jun.-2012, om 15:33 heeft 99jon het volgende geschreven:
Re: How can I download automatically only new images from my camera?
created by 99jon in Photoshop Elements - View the full discussion
Don’t you format the card in the camera after each download? That will wipe all images and prepare the card for a fresh shoot.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4480409#4480409
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4480409#4480409. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
I have an 11" Air with lots of remaining capacity running Mountain Lion. I also have a digital point-and-shoot camera. I have never downloaded images from the camera to this Air. However, if I just connect the camera to the Air's USB port, with the camera's available cable, and the Air is open, will a program like ImageCapture or iPhoto, auomatically come up, and I can begin to download wanted images? Or, will this sort of connection delete or fry everything on the Air? Do I need any other software on board? Will current Apple onboard programs allow me to download images from my camera and not destroy everything else?
Answered. Thanks.
-
I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks
If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.
-
How can I keep a photo image from fading away on my tv using apple tv.
How can I keep a photo image from fading away on my tv using apple tv?
Thanks for you reply. When I paint, I bring up the photo as you suggested. I begin painting. After about 10 minutes or so, the photo goes blank. And, I have to start the process over again to get that same photo. It interrupts the painting process. I think it goes blank due to a sleep function. I have gone into the Apple TV settings and turned off the sleep function. But, this does not seem to work. What can I do to keep the image on the TV screen permanently?
Maybe you are looking for
-
CS 6 Illustrator...won't open to display in illustrator
CS 6 Illustrator on latest Yosemite updates...Any file won't open to display in illustrator. It starts to open but it will not display the file in illustrator once you click on it. Need help!!! Thanks
-
is there a working GPS system included in the nokia X3 -02 ? I was told I had one in my exosting 6700 classic but its never worked! I was thinking about getting an X3
-
Envy 17t: slow as molasses. just boot and clone, please
I recently purchased an Envy 17t, 1080 IPS screen, i7 quad 8GB RAM. This should be a dream desktop replacement. Alas, it is so bad and unusable that I even decided to type this short experience description on a different computer. I wanted to write
-
Unusual error message when running any report on R12 (fresh installation)
Hi, I managed to install R12 on W2k3 finally and got several problems since. Now I am getting below message in log file, every time I run any report. It seems it works for other other concurrent programs (tried Workflow Definitions Loader). Below log
-
I am looking to buy some new headphones for my 5800. Currently I have a set of Sony MDR-EX51's they have been great but I've had them for a while and they are starting to degrade. What are you guys using with your Nokia's?