Photo in directory does not show up in album

Hi,
I'm new to PhtoShop and have a problem I can't fix.
I have copied a photo, using Explorer, into a directory from which an album has created.
When I do a general search for the photo by name, it appears but when I open the album it is not displayed.
The photo is not hidden but has no tags.
I tried "Find items in album", but without success.
I would appreciate any help in this matter,
S660117.

I just realized that I can drag and drop the photo on the album in question.
Once I did that, it appears as expected.
s660117

Similar Messages

  • Full picture photo shooting details does not show up

    Hi everyone,
    Normally when I shot a photo and in the photo viewing mode I can select "details" to see the full details of the captured photo such as shutter speed information. However, recently I found that the information does not show in full like in the past. The shutter speed an some other details are diappeared.
    How can I bring this back
    Methee
    Solved!
    Go to Solution.

    @alexdon thank you for your advice 
    I have tried it in safe mode but still the details of the captured photo does not show in full. I have attached a screenshot with this post which you can see that the details are very short. 
    Also, I have tried also a factory reset but it does not work at all. Possibly the PC Companion repairing that I did it last time might had some unknown error due to my home Internet connection was not stable. So, the PC companion repairing version of software might be permanently modified into the factory software. So the the factory reset does not work.
    Anyone has the same problem like me? or it is normal with the current Sony updated software. I am sure last 2 months ago when I bought Z3 it was not like this. And this is an annoying problem for me as I always use Z3 camera in manual mode and always make use of the first picture shooting details such as ISO, speed shutter, etc for re-shooting a second better photo. 
    Anyway, I will do a PC companion repairing again tomorrow morning, then I will post a result
    Below is the screenshot that  I shot a photo in safe mode using manual camera mode at 20.7 MP, auto ISO
    Then I openned the gallery in safe mode and see the details of the captured photo. You can see that there is almost no important details.
    There are only the width and height and then the flash is on or off.
    Thanks Alexdon
     And soory if my English is not good!
    Methee

  • When using the iphone 6 Plus. I use iMessage it is terribly slow to attach photo or take a photo the app does not show camera and slow... like 2 mins at least.

    When using the iphone 6 Plus. I use iMessage and then attach a photo or take a photo... the app does not show the camera fully or even to attach a photo does not work. I have about 8-9000 phones and like 10 short videos in there but it is incredibly slow and almost unable. I have the 128GB iPhone 6 Plus with 46 gb still available. I think this should not be so slow with so much memory still available. Please help. I am using 8.1.2. Yes I have set up the phone as a new phone. Apple store even reformatted this iphone 6 plus 2 months ago but it is still terribly slow Thanks

    Hey Bender1031,
    Thanks for the question, I can definitely understand how frustrating this issue may be with a brand new phone. Great troubleshooting so far by already attempting a restart and reset. If the issue persists, let’s try restoring your device and updating to the latest software (iOS 8.0.2):
    Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    iOS: How to back up your data and set up your device as a new device
    http://support.apple.com/kb/HT4137
    After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
    - If the issue is still present, you may want to contact Apple Support.
    - If the issue is now resolved, sync one type of content at a time back to the device. For example, if you had an issue playing music, add songs from iTunes and confirm they will play. If your contacts weren't loading successfully, add the contacts back. After each sync, test to see if the issue has returned.
    Thanks,
    Matt M.

  • IPod Nano directory does not show loaded tracks

    I have a 7th Gen iPod Nano that was formatted by iTunes for Windows 7 that does not show the tracks loaded on it once it is ejected. Apple has replaced the Nano twice with no change. Working with AppleCare Support I have removed iTunes and everything else from Apple several times in accordance with the "Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8" Knowledge Base article. We tried various cables and different USB ports but they made no difference. In between each removal I have run CCleaner's registry search and cleanup tool and restarted the computer. Windows 7 is and has been up to date and the version of iTunes has always been the latest. iTunes will recognize the Nano and I can load playlists on it but once I eject it and select the music icon it says that there is no music loaded. When I check to see if the iPod knows that there is anything loaded it shows that there is something loaded by virtue of the fact that it shows the same amount of free space as iTunes did just before it was ejected. I have spent a couple of weeks chasing this problem with the AppleCare Support Team in Cupertino and we are all stumped.
         I do not have any problems when I connect my iPod Classic to the same computer and load tracks on it.
         All of the Nano's that have experienced this problem have worked fine when restored on my Mac.
         The original Nano worked fine with this Windows 7 computer for about 9 months and then started saying that it needed to be restored every time it was connected even if it had just been restored. That problem brought about the first replacement of the Nano. After all of our efforts the AppleCare Support Team suggested that we replace the Nano again so that is what we did this week with no resolution of the problem.
         Does anyone know of any Windows software that is known to create problems with iTunes?
         I had not connected a Nano to the computer for about 2 months before I started having problems so I have no way of determining what might have been installed that caused this problem. This is a company computer and all software installations and updates are controlled by our IT Dept. iTunes is supported by the company due to the fact that our IT Dept. personnel and senior management have company iPhones and some iPads. We did connect the Nano to one of the IT computers and it was recognized and iTunes was able to see the tracks loaded but there was nothing available once it was ejected.
         Any assistance will be greatly appreciated.
    Tom Davis

    1. Shouldn't you be posting on the Nano Section?
    2. UPDATE your iTUNES
    3. It should be fixed...if not reply

  • Google+ photo upload tool does not show thumbnails

    When I use the photo upload tool in Google+, you select the pics to upload, enter an album name or use an existing one, and the upload should start. When this is complete, each uploaded photo should show in a panel so that you can then rotate, delete. This works in IE. In Firefox 24, each photo is just shown as a blue line.
    I have tried Firefox in Safe Mode to no effect.

    Hello in your system details it seems that you have in your [http://kb.mozillazine.org/Profile_folder_-_Firefox#Windows profile folder] a [http://kb.mozillazine.org/User.js_file User.js] file. The user.js file does not exist by default. If you create the file, forget it, if you have not create the file then try to delete the User.js file, to see if the problem goes away (some programs create the file also).
    thank you

  • IPhoto for iOS does not show all Facebook albums

    iPhoto for is not showing all of my Facebook photo albums when I attempt to share photos. I have not been able to recognize any differences between the albums shown or not shown except maybe album age - older albums remain invisible. Quite annoying.
    I have the latest iPad with latest SW and latest iPhoto.

    When I use iPhoto for iOS to share to Facebook I first get a chance to share one photo or select several.
    Then I see a choice to upload to an album, usually Wall Photos, but there in only that one album visible.
    Tap on that album and more choices come up. These include, eventually, all of my albums. I can then choose the album to which I want to upload the photo(s).

  • ITunes Store does not show author and "album artwork" of my podcast

    Although all information is available - the itunes store does not mention the author and "album artwork" of my podcast - if podcast is downloaded, album artwork is shown...
    How can I add the informatin (especially that author is not "unknown" anymore)
    http://itunes.apple.com/de/podcast/nie-mehr-schuchtern-der-podcast/id404201576?i =88951302

    For reference, you feed is at http://kontaktvoll.de/tinc?key=r5FOIixD
    This is not a valid podcast feed for iTunes. It's missing the 'itunes declaration' in the second line. The top two lines of your feed should read as follows:
    <?xml version="1.0" encoding="UTF-8"?>
    <rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" version="2.0">
    Without that, iTunes cannot read the 'itunes' tags which are necessary to carry some of the information, and which in any case are missing from your feed. The author name is carried in the 'itunes:author' tag and the image in the 'itunes:image' tag.
    This page contains a basic sample feed so you can see what it should look like and how these tags are formed:
    http://www.wilmut.org.uk/pc
    If you are hand-writing this feed it's a good idea to put returns in after each closing tag, as in the sample. At the moment most of your feed is on one line and this makes it very difficult to read when looking for problems, particularly as you add more episodes.

  • My app requires photo access but does not show up

    My photo editing app requires access to my photos and so I go to privacy settings but the app is not listed at all. I have even gone into Restrictions but it wasnt there either!
    I've restarted my ipad and still nothing!

    I about to tear my already thinning hair out. Philo124, you have saved me from doing this. I have been around in circles, searched the web from dawn till dusk for several days and yet just now in less than 5 minutes, I have problem solved. I can tell you that the Forbidden City in Beijing would have had an Apple IPhone stuffed in a crevice somewhere had my wife not insisted it took good photos.  No not the normal camera on it but Cameara Plus  pro.  Any how, thank you for your sound and helpful knowledge.
    How do I give this the 10 points tick???

  • Photos app years does not show countries

    After updating to iOS 7 I noticed that under the "Years" section, pictures from 2010 to 2012 all displayed the names and number of countries I have visited. However, no countries are listed in the year 2013, beside the heading even though this was the year I travelled to the most number of countries.
    Anybody happen to know how to fix this? The locations of the places I have been to, are shown in the collections and moments sections though. Just not in the years section.

    The App description works for me in the App Store.
    What are you doing?
    Have you tried restarting or resetting your iPad?
    Restart iPad: Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
    Reset iPad: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.

  • Photo stream switch does not show up

    When trying to switch on photo stream , I go to settings then iCloud , I give my account data and the rest of the switches (mail, contacts, ....) appear but not the photo stream switch

    I just realized that I can drag and drop the photo on the album in question.
    Once I did that, it appears as expected.
    s660117

  • Photo Editor screen does not show true dimensions at 100% setting

    When a new blank file is created at given dimensions ( say 6 x 4 inches) the actual dimensions  on screen and the ruler appear approx. 1.333 times smaller than the actual size ( 4.5 x 3 inches ) .How can I correct this?

    Computer monitors are made to work with 72DPI whereas printers are capable of printing at much higher DPI. I don't know if you are already doing these, but if you aren't, I would suggest you do the following:
    First check the DPI at which your printer prints.
    While making a new file in PSE Editor, make sure you change the resolution of your image to the DPI of your printer
    while working on the image, instead of making them 100% zoom, zoom them to "Print Size" to get a feel of how large your print is going to be.

  • HT201317 I can not view my shared photo stream.  Does not show in source list. Help!

    I cant view my shared photo stream from my source list.  This is preventing me from adding or removing photos.  Any ideas?

    Old Toad wrote:
    Log out of iCloud in the System/iCloud preference pane and disable Photo Stream in iPhoto's Photo Share preference pane.  Then log back in and re-enable, respectively.  That should jump start Photo Stream in iPhoto if both devices are signed in to the same iCloud account..
    OT
    And it seems you must do this every single time the shared photo stream is updated, ie. photos added/removed.  this is pīss poor.

  • I cannot import photos as Finder does not show the flashdrive. Using OSX 10.9.4

    importing photos from a flashdrive

    Hello ,
    Thanks for using Apple Support Communities.
    Make sure you have the view option for external disks enabled in your Finder preferences:
    OS X Mavericks: Finder preferences
    http://support.apple.com/kb/PH14046
    Take care,
    Alex H.

  • CREATE DIRECTORY Does not Create Any Directory in My File System Hard Disk

    create or replace directory emp_dir
    as 'D:\emp_direc';
    Main Question:
    *1. Transaction succeeded, but i have not seen emp_direc created in my D: drive. I'm running Vista Home Edition x32. Any idea why directory does not show up?*
    Optional:
    Extra info:
    after creating a directory i did: - avoid comment sign
    --create table oldemp ( fname char(25), lname char(25) )
    --organization external
    --(type oracle_loader
    -- default directory emp_dir
    -- access parameters
    -- ( records delimited by newline
    -- nobadfile
    -- nologfile
    -- fields terminated by ','
    -- (fname position(1:20) char,
    -- lname position(22:41) char)
    -- location ('emp.dat')
    --parallel 5
    --reject limit 200;
    Table created successfully, then I did
    describe oldemp;
    Name NULL Type
    FNAME CHAR(25)
    LNAME CHAR(25)
    2 rows selected
    Extra questions:
    *2. emp.dat carries all the table data which can make data more portable to different oracle servers. However, it is one time operation, once table is populated, i can not update, insert, delete any rows. Thats what i know, if i'm wrong please let me know. If what i said is true, just confirm it if you don't mind...*
    *3. Parallel 5, allows five oracle servers to deal with the emp.dat file at the same time. So won't there be any conflict! Maybe one server wants to read a certain data while the other server wants to delete it. Can you clarify please....*

    user11164565 wrote:
    create or replace directory emp_dir
    as 'D:\emp_direc';
    Main Question:
    *1. Transaction succeeded, but i have not seen emp_direc created in my D: drive. I'm running Vista Home Edition x32. Any idea why directory does not show up?*
    <snip>
    From the fine SQL Reference Manual found a tahiti.oracle.com, in the prerequisites for the CREATE DIRECTORY command:
    For file storage, you must also create a corresponding operating system directory, an ASM disk group, or a directory within an ASM disk group.
    Your system or database administrator must ensure that the operating system directory has the correct read and write permissions for Oracle Database processes.
    Privileges granted for the directory are created independently of the permissions defined for the operating system directory, and
    the two may or may not correspond exactly. For example, an error occurs if sample user hr is granted READ privilege on the directory object but
    the corresponding operating system directory does not have READ permission defined for Oracle Database processes.

  • How do I get my photos off my phone and onto iPhoto with iOS5. The phone does not show up in the list of devices.

    Now that I have upgraded iPhoto and my iPhone, when I connect my phone to the computer, the phone does not show up in iPhoto and I no longer am asked if I wasnt to import my photos. I haven't upgraded to iCloud yet.

    You don't not with a crack screen.

Maybe you are looking for