Photo in Preview showing as pink block (MBP, 10.6.7)

Shows the top few px, then the rest of the photo is pink block.
I know the 'proper' photo is there, or was there, because initially it showed the whole photo before overwriting it with the pink block.
No other photos are affected.

Hi. Thank you. That kind of works but what I was looking for was where you had the list on the L and then in the column to the right, it showed the images so you knew what each number was for. So if you clicked on a number, you could see what that image was. Thanks again!

Similar Messages

Aperture Photo Book: preview shows corrupted images

Hi,
I just finalized a photo book in aperture. When running a preview as part of the first steps in buying the book, many pictures turned out to be corrupted. The showed lines and patches of the picture with different colors. I'm afraid to order the book since I'm not sure if the problem will also appear on the actual book. Can anyone help.
Thanks!

Hi,
I just finalized a photo book in aperture. When running a preview as part of the first steps in buying the book, many pictures turned out to be corrupted. The showed lines and patches of the picture with different colors. I'm afraid to order the book since I'm not sure if the problem will also appear on the actual book. Can anyone help.
Thanks!

When I try to print a photo from iphoto, I select the photo, click print and the preview shows there is a lot of the photo cut off. It also prints this way. How can I print the whole picture?

When I try to print a photo from iphoto, I click print and the preview shows a lot of the photo cut off. It also prints this way. How can I print the whole photo?

After selecting File > Print, a pop-up window should appear. Select "Customize" and this should take you back into a panel within iPhoto. Towards the bottom, you should see an option for "Layout". Select this option and choose the correct photo orientation.
Hope this helps!

The preview page shows a pink/purple background when i place a.swf file rather than a transparency why?

The preview page shows a pink/purple background when i place a.swf file rather than a transparency why?Would you be kind enough to help?

Hello,
Usually pink\purple background appears when "Show Grid Overlay" is enabled.
please go to View > Hide Grid Overlay and see if it works.
I am not sure if it will fix the problem as you said that pink\purple background appears when you place a swf file only.
If this do not fix the problem I would request you to share the screenshot of the design mode for better idea of the problem.
Regards
Vivek

JSF Design view broken, showing tags as blocks instead of preview

I'm using jDev Build JDEVADF_11.1.2.3.0_GENERIC_120914.0223.6276.1
but this has happened to me several times before with previous versions of jDev.
All of the sudden after restarting jDev the design view for all my jsf pages look broken, showing only tag blocks, and not the design view it was showing previously. Why is this? what happened?
The only fix I found on this forum was to remove the system directory (should be somewhere like: C:\Documents and Settings\yourUser\Application Data\JDeveloper\system11.1.1.3.37.56.60 ) and let jDev create a new one. But then I have to reconfigure everything again, which can be frustrating.
Can anyone explain what's going on here, and if there's a better way to fix my jDev when this happens?
Edited by: tnology on 14-Nov-2012 13:37

Thanks, so these are the messages I am getting in Design view, anyone know what it means? :
Nov 14, 2012 3:31:52 PM oracle.security.jps.util.JpsUtil disableAudit
INFO: JpsUtil: isAuditDisabled set to true
Nov 14, 2012 3:32:00 PM oracle.jdevimpl.webapp.faces.config.modelimpl.FacesConfigHandler setIsMetadataComplete
INFO: jar:file:/C:/Oracle/Middleware23/jdeveloper/jlib/bundleresolver.jar!/META-INF/faces-config.xml metadata-complete undefined (false)
Nov 14, 2012 3:32:02 PM oracle.bali.xml.share.WeakListenerManager addListener
WARNING: Tried to add listener that was already attached: listener=oracle.jdevimpl.webapp.grammar.DelegatingGrammarProvider$IdenticalGrammarEventPercolator@185d004source=oracle.jdevimpl.webapp.jsp.libraries.JspLibraryMetadataGrammarProvider@35b0c9
Nov 14, 2012 3:32:04 PM javax.faces.FactoryFinder$FactoryManager getFactory
SEVERE: Application was not properly initialized at startup, could not find Factory: javax.faces.context.FacesContextFactory. Attempting to find backup.
WARNING: Unable to initialize <servlet> Faces Servlet. Check project libraries configuration.
java.lang.IllegalStateException: Could not find backup for factory javax.faces.context.FacesContextFactory.
     at javax.faces.FactoryFinder$FactoryManager.getFactory(FactoryFinder.java:996)
     at javax.faces.FactoryFinder.getFactory(FactoryFinder.java:331)
     at javax.faces.webapp.FacesServlet.init(FacesServlet.java:219)
Nov 14, 2012 3:32:06 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: unavailable.
Nov 14, 2012 3:32:06 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: unavailable.
Nov 14, 2012 3:32:24 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: unavailable.
Nov 14, 2012 3:32:24 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. cvc-complex-type.2.4.b: The content of element 'propertySets' is not complete. One of '{"http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd":propertySet}' is expected. Location: unavailable.
Nov 14, 2012 3:32:24 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. SchemaLocation: schemaLocation value = 'http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd' must have even number of URI's. Location: unavailable.
Nov 14, 2012 3:32:24 PM oracle.security.jps.internal.common.util.StrictValidationEventHandler handleEvent
WARNING: Failed to validate the xml content. cvc-complex-type.2.4.b: The content of element 'propertySets' is not complete. One of '{"http://xmlns.oracle.com/oracleas/schema/11/jps-config-11_1.xsd":propertySet}' is expected. Location: unavailable.

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp

How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.

Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps!

Why some photos do not show up in the widgets after final export?

Why do I have a problem with the FeatureD News Widget not showing all my photos? I have tried redoing it many times over in different formats and all but one photo never shows up in the final export. Please I need help to finish up the website.

If I understand this correctly, you are reporting that you have images in your Featured News' target frames and some of those photos do not show up in the published site.
If so, I would like you to confirm if the widget works fine in Preview within Muse? Are the images missing in all browsers, even after clearing the browser cache? Can you provide a link to a published site? If required I may also request your source Muse file to investigate further.
Thanks,
Vikas

Photo Settings not showing up; cannot remove Ken Burns effect

Hello,
Earlier today, I selected the photo setting button and a little box showed up with the Ken Burns effect options in it, however now when I select photo settings, the only thing that shows up is the preview of the of photo zooming/panning. Please help... how do I get back to that little box so I can remove the Ken Burns effect from my photos! Thanking you!

Also having the same problem. When going to show photo settings, it shows black screen. Un checking Ken Burns and updating does nothing. All photos in slide show have same super zoom of Ken Burns with no way to remove it or alter it.
iMovie HD broken, iMovie 08 ***... The only reason I purchased Mac was for handling media and I end up doing projects on my old pc using photoshop elements.

Old iphone3 photo albums not showing in iphoto and I want to import them

I found my old iphone3 today and discovered a heap of photos on there that we lost years ago when our hard drive died.
I'm very keen to get these photos onto the computer and of course then back them up onto an external drive!
When I plug the phone into my mac, both iphoto and image capture only show the photos that are in the camera roll to import, not any of the albums that are on the phone. I'm assuming this is because at one point in the phones life the album photos had already been imported, but that doesn't help me now.
Any suggestions?
I've also tried opening the photos in preview, but again it only shows up the camera roll photos.
Thanks in advance

I'm assuming this is because at one point in the phones life the album photos had already been imported, but that doesn't help me now.
Have the photos been synced to your iPhone using iTunes? Then you cannot import them directly. iPhoto, Image Capture, Aperture will only import photos, that are in the Camera Roll, not synced photos. On no account sync your iPhone again with iTunes, until you have rescued the photos.
See: iOS: Syncing photos using iTunes
You can't reimport pictures synced from your computer to your device back to your computer. You can only import pictures in the Camera Roll or Saved Photos from your device to your computer. If you need to retrieve synced photos from your device:
Email them from the device to yourself.
Copy them from the emails to your computer.

When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black. Why?

When i click on a photo to edit, the photo doesn't show up and the area where the photo should show up is black. Why? I can edit some photos, whereas others I can not.

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

I have got two photos by mail from iPhoto. My friend has put descriptions in the description field. The I got the mail I saw the description below each photo. If I check the photos with Preview they have Exif and JFIF fields but no IPTC field.

I have got two photos by mail from iPhoto. My friend has put descriptions in the description field. The I got the mail I saw the description below each photo. If I check the photos with Preview they have Exif and JFIF fields but no IPTC field.

Does you friend use any accented letters in the descriptions? That might cause it but I don't know for sure.
Has he run any repair operations on his library, i.e. repairing the database file? Another possible fixe that's easy to apply is the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
Home/Library/ Preferences folder.
2 - delete iPhoto's cache folder(s):
Home/Library/Containers/com.apple.iPhoto
and, if there is one, the
Home/Library/Caches/com.apple.iPhoto folder
3 - reboot, launch iPhoto and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
The demo version of GraphicConverter can be used to view/check/edit the ITPC fields in an image file after exporting.

No Previews Show On Catalog Import to LR4

I need some help. I've just imported my catalog from version 3. No problem with the import, all the collections etc came in just fine with all the right number of photos, organization etc. However there are no previews. Not one! I have just had my computer updated to SSD, so my drive names have changed from before. ie the file structure that used to be on C are now on G. I would have thought that the photos would all show as missing and that I'd need to reconnect them, and find all missing photos. How do I locate the previews that aren't showing if nothing is showing as missing? Thanks for your help!

Win XP > Windows Control Panel - Display Settings. Win 7 > Appearance & Personalization > Display > Screen Resolution > Advanced Settings > Color Management

Previewing Pages document in Preview shows page numbers incorrectly

Previewing Pages (5.2) document in Preview (7.0) shows page numbers incorrectly. Regardless of starting page number preview shows as Page 1.
Suggestions appreciated...

That appears to be YABIP5 (Yet Another Bug In Pages 5].
Pages .09 documents are fine.
No prizes however for finding bugs in Pages 5/5.2 it's swarming with them.
Peter

Photo won't show on cover of Iphoto Calendar after dragging and dropping

Every year I create a calendar on Iphoto and I have always been able to troubleshoot everything myself.
This time, I am stumped. The whole calendar is ready to go but for some reason, the photo I added to the cover will not show up. I am using the same photo later in the calendar without a problem. In fact, when I hover over the picture it tells me that is being used on the cover and on page 11...but I can't see it!
The title underneath the photo will only show when I click on the text box. Once I click away from it, it will disappear.
Anybody? Christmas is approaching fast and I need to get this into production ASAP to mail to Europe.

Hi HeyBayLondon!
It sounds like you may want to try restoring your phone and then re-syncing the content from your computer to see if the information will show up after that procedure. Information on doing that can be found right here:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Thanks for coming to the Apple Support Communities!
Regards,
Braden

After migrating data from Time Machine, some of my photos are not showing up in iPhoto. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see my photos

After migrating data from Time Machine, some of my photos are not showing up in iPhoto LIbrary view. I get a 'dashed rectangle." When I click on it I get ' ! in a Triangle" When I click on that, I actually can see the photo. I want to see all my photos in 'Library' view, and I can't figure out how these photos seem to be arbitrarily hidden. Help, please.

Try these for the first attempt:
First be sure to have a backup copy of the library if you already don't have one.
OT

Photo in Preview showing as pink block (MBP, 10.6.7)

Similar Messages

Maybe you are looking for