Photo in video cut when going from "Quick" to "Expert"

I created a video using Premiere Elements 11. I used a video I took on a Canon T3I and pics saved on the computer and edited using Photoshop Elements 11. I created the video with the Premiere Elements 11 set to "Quick." With the video created this way it worked fine and it up;loaded to you tube and worked perfectly on there. I then opened the completed video file and saved a copy. I then opened the copy and clicked the "Expert" button. After the screen had changed to go from "quick" to "expert" I noticed that one of the pics in the video was cut and replaced with a red and black screen that says "media off-line" in several languages. The caption from the original pic is still there but when I play the video on Premiere Elements 11 the picture is not there and when the video plays it shows the red and black media offline screen. The pic that was eliminated is a .tiff file. what happened to that pic and how can I fix it? Thanks.

Henry XYZ
I suspect that somewhere along the line you moved the source media that went into the project.prel after the project prel (project file) was saved closed. Let us see.
But, I need to go through your details to see where that might have happened. I want to make sure we are distinguishing between import source media, source media on the Quick view Filmstrip, source media on Expert view Timeline, and the export of the source media to a file.
1. You set up a project with video and photo content in the Quick view. And, uploaded that to YouTube. Am I correct that the uploaded to YouTube was from Quick view Filmstrip via Publish+Share/Online/YouTube?
2. What did you save when you wrote
I then opened the completed video file and saved a copy.
Was that a copy of the project.prel (project file) that you saved via File Menu/Save A Copy or something else?
3. Then you wrote
I then opened the copy and clicked the "Expert" button. After the screen had changed to go from "quick" to "expert" I noticed that one of the pics in the video was cut and replaced with a red and black screen that says "media off-line" in several languages.
Assuming that is the copy of the project.prel file and given that you switched to the Quick To Expert view and noticed a missing photo (.tif) when viewing in Expert view, what next?
a. When you first opened the project.prel copy, apparently it opened in Quick. Did you see the photo at this point?
b. When you went to Expert view and found the photo missing, did you go back to Quick? If so, was the photo still there?
4. Do you have any drive letter changes going on in all this? Where is the source media for this project saved?
Please review. Your reply will help us to help you resolve this matter.
It is not uncommon for the Quick view not to offer features or present as does the Expert view. But I have rarely if ever run into instances of the reverse.
So, please check the save location of the "missing" photo in Expert as to what is going on there. Premiere Elements project has only copies of the source media and these copies link back to the originals at their hard drive save location.
Thanks.
ATR

Similar Messages

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

Print issues when going from develope to print

In LR5 when going from Develope to Print, I loose the picture and the print tab is greyed out. Never had this problem before, did I do something wrong

Make sure the source remains the same - check the filmstrip.
The only suggestion is to place the batch for editing and printing into a collection or (temporary) quick collection and access the images from there in both modules.

What is the best way to back up photos and videos to a dvd from iPhoto, not in iPhoto format but just in jpeg format to access on either windows or mac

what is the best way to back up photos and videos to a dvd from iPhoto, not in iPhoto format but just in jpeg format to access on either windows or mac

When you export the videos out of iPhoto be sure to select Kind = Original. Otherwise you'll just get an image file of the first frame of the video.
OT

When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?

When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?
Thanks, Rich

In order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.

My photos shrink in size when emailed from IPHOTO or attached - How can I fix this. My friends say they can't see my pictures... thanks!!

My photos shrink in size when emailed from IPHOTO or attached - How can I fix this. My friends say they can't see my pictures... thanks!!

When you email from iPhoto, you have a choice as to the size of the picture - choose medium and your friends will be able to see them. By the way, do your friends click on the photo attachment in the mail to open it?

What format of photos and videos can i export from my computer to my iphone/ipad?

Hi,
what format of photos and videos can i export from my computer to my iphone/ipad?
Also i have a problem with Imessage from my Iphoe 4S and Ipad that some of my contacts althought they have activated Imessage from their product i cannot send them any Imessage.
Kind regards.

Regarding the supported formats for syncing from a computer to the iPhone, the following information is from http://support.apple.com/kb/ht4236
On a Mac, these file formats will sync from your iPhoto library to your device:
BMP
GIF
JPEG
JPG
JPG2000 or JP2
PICT
PNG
PSD
SGI
TIFF
On Windows, these file formats will sync to your device:
BMP
GIF
JPEG
JPG
PNG
SGI
TIF
TIFF

HT4906 how do i access my photos and videos on my icloud from my wife's imac?

how do i access my photos and videos on my icloud from my wife's imac?

Do you mean your photos in the Photo Stream?
First her system and iPhoto version should support iCloud and Photo Stream: OS X 10.7. 5 and iPhoto 9.4 or later.
Next, she would have to log into the your iCloud account in her System/iCloud preference pane and enable Photo Stream:
She would also have to enable Photo Stream in here iPhoto Photo Stream preferences:
If she enables all of the iCloud features in the System/iCloud preference pane she'll be syncing your Contact list with hers, bookmards, etc. If you want to have her only get the photos do not enable any of the other items. If she has her own iCloud account she'll won't be able to use it.
If you want to create a Shared Photo Stream
so she could view the phtotos you put in it without using your iCloud account the system requiremets are: OS X 10. 8.2 or later. This Apple document describes what is needed: iCloud: System requirements
OT

TS1741 I have my ipad2 playing music to my Apple TV. But can't get photos or videos that I took from my photo library to the tv. What am I doing wrong? Thanks for any help..

I have an ipad2 and iPhone 4. Trying to get photos and videos from the ipad2 to apple tv. My music is playing fine on the tv, but how do I get the photos and video onto the tv? Thanks

Welcome to the Apple Community.
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2, iPad 3 or iPhone 4s, double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

Apple TV 2 choppy video playback when mirroring from Macbook Pro (Yosemite) and Macbook Air (Yosemite) but not iOS devices

Video playback is choppy (cuts out every 30-45 seconds) when air playing from both my MacBook Air 1.3 GHz Intel Core i5 running Yosemite and my husbands new MacBook Pro, but runs perfectly when mirroring from any of our iOS devices (iPhone 6+, iPad mini 3, etc.) We have Apple TV 2. This problem just started a few weeks ago, was working fine around Christmas. The problem seems to have coincidentally started right after our son tried plugging in and setting up his Chromecast on our tv. I disconnected the Chromecast, but we still have the problem. All of our software if up to date and I've tried disconnecting blue tooth, we do not have a microwave and our wifi network has a very strong signal. We have an Airport Extreme base station. Is there a solution to our problem?

Hi leahmturner,
I see that you are experiencing an issue with choppiness while AirPlay Mirroring from your computers to your Apple TV. I have an article that contains some helpful troubleshooting steps for you regarding this issue:
About AirPlay Mirroring in OS X - Apple Support
http://support.apple.com/en-us/HT201343
Optimizing image quality
Resolution matching modes
You can choose between two desktop resolution matching modes that let you select which display will have the best image. When AirPlay Mirroring is turned on, select an option under "Match Desktop Size To:" in the AirPlay Mirroring menu extra.
Match Desktop Size To: Apple TV
AirPlay Mirroring changes the desktop resolution to best match your Apple TV, resulting in a 16:9 image that fills the HDTV screen. This setting often produces the sharpest image on the HDTV. The aspect ratio and/or resolution of the built-in Mac display may change to accommodate the Apple TV.
Match Desktop Size To: This Mac
AirPlay Mirroring scales the contents of the desktop to fit on the Apple TV, leaving the resolution of your Mac's display unchanged. Use this setting for the sharpest image on your Mac's display. Depending on your Mac model, the resulting image may not fill the HDTV screen.
Troubleshooting AirPlay Mirroring
If you don't see mirroring options
If your Mac and Apple TV are on the same network, but no AirPlay Mirroring menu appears, your Apple TV may be asleep. Simply press a button on your Apple TV remote to wake it up. After a few seconds, the AirPlay Mirroring menu extra appears. If you still don't see the options you expect, make sure your Apple TV has the current software update installed. Also make sure that you have the "Show mirroring options in the menu bar when available" option selected in the Displays pane of System Preferences.
If the menu bar or Dock is cropped
Some HDTVs have bezels that cover a small percentage of the screen. This can result in a slight cropping of a full-resolution HDTV image. Depending on the HDTV model, AirPlay Mirroring may automatically adjust the picture size to prevent cropping. If you are using OS X Mountain Lion or later, and you see cropping of the menu bar or Dock when using AirPlay Mirroring, toggle the Overscan correction option in Displays preferences.
Minimize video post-processing
HDTVs often apply picture quality enhancements intended to improve the look of film and video sources. In some cases, these enhancements can lead to over-sharpening artifacts when displaying your Mac desktop. Some HDTV models have built-in settings to change or disable the enhancements for use with a computer (computer, presentation, or game modes). Otherwise, the controls for sharpness, detail enhancement and noise reduction can be used to optimize the appearance of the Mac desktop. Consult your HDTV’s manual for guidance on the appropriate settings for use with a computer.
Firewall security settings
If you use a firewall, make sure the following firewall security options have been set to allow AirPlay Mirroring to work:
Choose System Preferences from the Apple menu ().
Click Security & Privacy, then click Firewall.
Click the lock icon to unlock it if it's locked, then type an administrator name and password.
Click Firewall Options.
Deselect (uncheck) the “Block all incoming connections” checkbox.
Select (check) the “Automatically allow signed software to receive incoming connections” checkbox.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Does AppleTV2 limit the number of photos it will display when streaming from Aperture when streaming to the TV?

I am new to AppleTV. I bought it and an iPad2 at about the same time. I've been an Aperture user for years but not so much lately. I am having fits with Aperture crashing as soon as I open it. I mean on the first click or before. I simply can't get into Aperture at all during the last 20 tries or so. I'm really rather freaked out about it. I have a wedding to upload and a few other recent events totally thousands of photos that I can't get off the SD cards. Thankfully I'm not a professional but my niece is anxious to see her photos nonetheless.
I don't know if the galleries in MobileMe even exist anymore but that was my idea as an alternative place to try to access photos from my computer to see them on AppleTV. It might have been my high level of frustration and despair but I could not find a way to move the photos to MobileMe from Aperture (on the day I could get into Aperture). Export does not list MobileMe as an optional destination. It's been too long since I sent anything to MobileMe and I can't remember how I did it.
In the past and even today I've successfully accessed a few of my photos in Aperture through my AppleTV2. Thankfully, Aperture does not need to be open to see the photos. However, my problem is that when I stream through AppleTV I can only get to a miniscule fraction of my photos. I have a selection of projects that will appear on my TV but the vast majority of the projects list only ONE photo in the project when there are dozens, hundreds or thousands in the various projects.
I tried making some new projects and that partially worked. Some of the ones I just made still only show one photo but I made one with about a thousand scenic photos that sort of worked. I loaded it to play during a party today and about 500 were listed in the folder when I started the slideshow. I didn't count them as they played, of course, but it certainly seemed they replayed more than I wanted them too in spite of the five second time selection. I will move that to 10 seconds next time. What I really want to do is have access to large groups of different photos I have in Aperture. I want to pull in a mix of trip locations, wildlife, scenic shots, etc. It would be nice if Aperture picked up Smart Albums and not just projects.
I have multiple problems going on: computer freezes, cursor moves but won't click and keyboard becomes unresponsive, flashing artifacts and horizontal lines, CRASHES galore. Right now I'm feeling kind of panicked it's going to crash before I hit "post message". If you can offer any guidance in any of these areas, your help will be deeply appreciated.

John, thanks for pointing out that pathway to send files to MobileMe. I was looking under Export.
Yes, I know that some of my concerns may be better suited to other forums but all of my problems hinge around updating to Aperture 3 and Snow Leopard at the same time. Therefore I have no clue if it's one or the other or a toxic combination of both that has brought me such misery. My problems cross into several categories. I've prowled the forums (communities) for many months looking for advice.
If I can ever get back into Aperture I will surely try your "update previews" suggestion. I did the Repair Permissions and it just finished as I was typing here. It opened Aperture for a couple of seconds and crashed in the background. I got the same crash with the Repair Database. I'm now doing the third Option/Command option in Aperture of rebuilding the database. I don't know what to do if those repairs/rebuilds don't work.
I have the program on my number one hard drive with over 300 GB free space. My libraries are on my second 1 TB HD with 369 GB of free space. I've been accessing Aperture with nothing else running and that doesn't help. I have four 512 MB DDR2 FB-DIMM cards. I would love to have more RAM but that's all I've got right now. I also wonder if my Graphics Card is toast for the new OS and version of Aperture. I don't know enough about computers to figure this out and I'm hoping someone will have the solution I need.

How can I retrieve my photos and videos after pressing 'delete from everywhere' accidentally on my iPhone 4s?

Hello all,
So I was organising my photos and videos on my iPhone 4s and wanted to delete them from my camera roll once I had moved them to new folders. When I tried to delete them from my camera roll it asked if I wanted to 'delete from everywhere'. Not knowing what this button did I pressed it and have now lost all the copies of those photos and videos I had taken!!!
Is there any way of retrieving them off of my iPhone? Is there like a recycle bin type folder where all the deleted data has gone to from where I can recover it?
Hope someone can help.
Thank you

Your backup contains photos and videos from the camera roll, if you did not sync after that, use the latest backup to restore from: iTunes: About iOS backups and Backing Up, updating, and restoring your iPhone and iPod touch software

VIDEO CUTS WHEN I PUBLISHED ON THE WEB

Hi all,
My name is Dario. I am working in one society for worker's formation.
I often use Captivate CS 6.
I have one problem, when I upload one video (video lesson) in Captivate and export a SCORM document, the video published in the web, cut last second.
I don't understand.
In my project a slide's duration is same at video's duration.
Could somebody help me?
Thanks

Hello Dario,
When you inserted the video, did you insert the event video or Multi Slide Synchronized Video, or is it a Video recording done in Captivate?
Do you face this issue when you publish your Project and see that locally?
Make sure that there is no effect applied onto that video like Fade out only in the Properties of that Video.
and also check from edit>Preferences> Project> start and end> fade out should not be checked.
Thanks.

Why is my video pixelated when exporting from Premiere Pro?

Hi,
I'm a musician wanting to make some basic videos for YouTube. The videos will consist of an intro (logo, title etc) and audio playing over a still image which will last the duration of the song. I've edited the still image for the video within Photoshop (CS5.1). The image is of a woman screaming and is intentionally very dark. When I export this image from Photoshop, the quality is excellent. When I then import this image into Premiere Pro (CS5.5) and export as the finished video, the quality of the image is significantly reduced and is rather pixelated. After spending hours searching online and trying different settings to achieve the result I want, I've had no luck, and I'm now in desperate need of a professional opinion. Is it possible to get the same quality image within the exported video as I get from an exported Photoshop file?
Things I've tried:http://www.ashmathos.com/Musici
Photoshop - Exporting image using different file types - .tif , .PNG , .PSD etc
Premiere Pro - Exporting video using different formats - .FLV , Quicktime and MPEG4
- Changing the Capture format between DV and HDV
- Different presets - AVCHD, HDV, DV - PAL/NTSC etc
Both the image exported from Photoshop and the video are 1080p (square pixels)
An example of what I've explained can be found here:
http://www.ashmathos.com/Musician/Test
(The video can be found below the image)
To any responders,
Thank you!

Can't you see how the video is pixelated? Mainly around the nose and forehead?
Nope. Looks fine when I watch it.

Firefox will not play .ogv video files when loaded from a server. Does anyone have any answers that will fix this?

I've read the suggestions for fixing this, and none of them work. I've updated my .htaccess to match MIME types for .ogv, I've uploaded the files as both Binary and ASCII, neither method works. The .ogv file plays fine when you load it from a local file, but it will not play when viewed from a remote server. I've confirmed with my hosting company that the .htaccess and all other issues for HTML5 are up-to-date. Safari and Chrome play the HTML5 videos just fine, but Firefox will not. Does anyone have any concrete answers as to what the problem is. I'm also serving up the video files as .webm and .mp4, but neither of these formats works in Firefox either.

That can happen if the server isn't configured properly to send the files with a by Firefox supported MIME type.
*https://developer.mozilla.org/en/docs/Properly_Configuring_Server_MIME_Types
Did you check via the Web Console which headers Firefox receives when requesting the .ogv file?
If that is OK then it is possible that the file is using an unsupported coding method.
* https://developer.mozilla.org/En/Media_formats_supported_by_the_audio_and_video_elements

Photo in video cut when going from "Quick" to "Expert"

Similar Messages

Maybe you are looking for