Photo Ink for 7510

I've never once printed on photo paper.  Always use black draft whenever possible, but for reasons I've never understood the photo cartridge depletes.  I'm at the point where the regular black ink is streaking.  But, the clean heads utility won't work unless I buy yet another black photo cartridge.  I just don't understand this.  I want to print in draft black, and occasionally "best".  Can someone help me out?  Thanks.
This question was solved.
View Solution.

Your printer uses separate ink supplies and printhead assembly.  If the printhead is allowed to run dry it may be damaged, resulting in expensive repairs to restore functionality.
Some ink is used to keep the printhead healthy, the document here explains how ink is used in HP (and other manufacturer's) printers.  In the vocabulary of that document your printer is an IIC printer.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • 564 black ink - printer using photo ink for general printing!

    I ran out of regular black ink for my Photosmart C6380 a couple of weeks ago.  Had a full cartridge of photo black, but none was used - pages were very faint gray.  After replacing the empty cartridge with a 564XL, I see that my photo black is now half empty while the regular black ink is full and has not been touched at all!!  Where's the confusion?  How do I make the printer draw from the standard ink cartridge instead of the photo?  It won't work without every cartridge in place.

    Hi Selig,
    Thanks for posting you issue on forum,
    From what i understand you would like to Print use black ink only instead of photo black.
    You have an option under the printer driver which says Black ink only, by selecting that you will not be able to print color. On most cases this should help you use the black cartridge over the photo black.
    If you have to print color you might need to change this option,
    I dont have the printer over here but the steps are from best of my knowledge.
    Go to Control Panel>> Devices and Printers>> Highlight Printer>>Right click on Printer and click Printing Preferences.
    Click on Advance>>click on the drop down for Print in Greyscale and select Black Ink only
    with newer driver we have this option under Printing Preferences>>Paper/Quality tab and under Quality settings.
    Although I am an HP employee, I am speaking for myself and not for HP.
    Say thanks by clicking the "Kudos! Star" which is on the left
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

  • Storing photo ink for later use

    What's the proper way to store the Vivera ink cartridges when not in use?  Right side up, upside down?  I have it in a small Tupperware container which seals tightly.
    This question was solved.
    View Solution.

    maxjoy wrote:
    It is a photo cartridge #99 for Officejet 6310 All -in-One.  Is a humidor the black plastic "holder?"  What about the tape that covers the print head--replace for storage or toss? 
    Yes, you should use the black plastic holder and store with the nozzles facing down.  Toss the tape once it is removed, if you try to reapply the tape it will cause color misssing (or in the case of the #99 cartridge, black mixing into gray) which will ruin the cartridge.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Bypassing need for Black Photo Ink

    I am printing basic documents and for the first time my Black Photo Ink is LOW, but my regular Black Ink is FULL.
    All of my pages are printing blank.
    It must be directing the printer to use the Black Photo Ink first, even though these are just Word and PDF documents.
    Please help me fix or understand settings for this?
    Working on a MAC (2 years old, not updated to Yosemite yet)
    Thank you!

    Hi @WilliamsA,
    Welcome to the HP Forums!
    I understand that your HP Photosmart 7510 is printing blank pages. I am happy to look into this for you!
    I would recommend to take a look through this guide, Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart 7510 e-All-in.... Also, take a moment to read through this article, Ink Usage in Inkjet Printers.
    Hope this answers your question, and have a great day!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Photosmart 7510 not printing photo ink when it should, but using up all the other ink cartridges​.

    I'm printing photos, mostly black and white, and all my regular cartridges are almost depleted when I thought they were printing from the photo ink cartridge.  I want the photo ink cartridge to be used and it still shows full.  I had to run out and get new cartridges which is becoming expensive.
    I have windows 7 and I use the Windows Photo Viewer to print the photos.
    I need steps in how to set my printer properties so that the photo ink cartridge is used.
    As of now, the way I look at it, it would be less expensive to go to Wal-Mart or a local grocery store and print my photos there.
    Thank you.

    Hi,
    Photo ink is actually black and under normal printing (including printing photos) it can last 3 times longer than other inks.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Stop it from using photo black ink for black text printing and where has the color ink gone?

    My HP Photosmart Prem C310 series all in one is using the Black Photo ink cartridge for text printing instead of the XL Black that I put in it for text printing. How can I get it to use the right cartridge for printing? Also, even though I have NOT printed ANY photo's and very few pages of text the new set of color cartridges I put in it a few months ago are almost empty. Why? How could they be almost empty when I have NOT printed anything in color? This is getting ridiculous replacing ink cartridges every few months WHEN I HAVE NOT BEEN PRINTING ANYTHING!!!
    The set of ink cartridges that came with it lasted for several months. Since then I've gone through two sets in less than a year. That's 3 sets of ink cartridges when I have only printed 3 photo's when I first set it up. And have only used les than a 1/4 of one package of printing paper. I've only put paper in it twice. Each time it was about a 1/4 inch or 3/8 of an inch thick stack of paper in the tray. I've even tried shutting the printer down when its not being used for a long period of time but the ink is still disapearing. Where is it going? Why is it going there? How do I stop it? This is rediculous. I may as well junk the thing even though it still works because I cant aford to keep feeding it ink when its just sitting there doing nothing most of the time.
    Thank you
    This question was solved.
    View Solution.

    I just got another email from HP about this problem wanting to know what I found for a solution to this problem. From all of the suggestions from the HP tec support all of them pretty much kept saying the same thing. That it is my fault that it's using so much ink because I have it on the wrong settings. One tec did slip and say that it doesn't matter what settings you have it on it will always use the Photo Black cartridge for printing plain black text and it doesn't matter if you have a X-Large Black cartridge in it for text printing because it was made to always use the Photo Black for text and even use some of the colors to blend with the black to make it stand out. Why anybody would need this when just printing shipping labels and things like that I don't know.
    Any who, The only solution for this problem is,,,, junk the printer and get a different brand & model of printer. Research it before buying to find out how much ink it wants to waste and if it will still print black text if it only has a black cartridge in it. I was going to get rid of mine by giving it to a friend since they don't have a printer. But since I want to keep him as a friend I decided not to give it to him. Since it cant be traded in for a different one even though it still works, Its going to the target shooting range the next time I go out shooting. Maybe I'll take a few video's clips of it getting blasted to pieces with a Ruger 10-22 .22 cal. rifle with 25 shot clips, a Ruger Mini-14 Ranch Rifle shooting .223 cal with a 30 shot clip, a Chinese SKS 7.62 with a 30 shot clip. And maybe use my Ruger P89 9mm pistol and put a couple 15 round clips of 9mm in it. If there's anything left I'll finish it off with a few 3" magnum loads of #2 steel shot with my 20 gauge shotgun.  Then I think I'll do the same thing to my Westinghouse 46" flat screen HDTV that just died.
       Then maybe I'll come back and post the video's of my "solution to this printers problem". It may not fix the problem, but it will be an entertaining way of getting rid of the problem.

  • Finding, Shopping, and Recycling Ink for your HP Photo Printer

    The following link is great for finding, shopping, and recycling ink for your HP Photo Printer.
    How to find the right HP ink
    Ways to save money on ink
    Save money and get better results with Original HP ink
    How to check your printer’s ink levels
    Recycle your ink cartridges
    How to order ink
    http://www.hp.com/united-states/consumer/digital_photography/print_better_photos/tips/choosing-ink.h...
    Click the Kudos on the left side for helping and click Accept as Solution for providing a solution. I work for HP.
    Best Regards,
    Kenneth
    This question was solved.
    View Solution.

    I hope this helps!
    Click the Kudos on the left side for helping and click Accept as Solution for providing a solution. I work for HP.
    Best Regards,
    Kenneth

  • HP photosmart 7510 not using the regular black ink only photo ink.

    Hi, the problem thta i am having with my printer is that when i try to print anything in black it only uses the photo ink which has now run out, i have replaced the regular black ink multiple times but it is still trying to use the photo ink and now since it is empty it acts like it is printing but the documents come out blank since the photo ink is empty.
    Thank you 
    Kerim

    Hi Kerim, sorry to hear that you are having printing issues with the black in cartridge. If I understand correctly, your printer will not print regular black ink. It wants to use the Photo black all the time. I would need to know some information about your computer. Are you using Windows or Mac? Have you attempted to do the Firmware update that is available on the printer? Once I have the operating system or your computer, I can then send you the link with the instructions on how to do the Firmware update.
    Please write back at your convenience and I will be happy to help.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Help with hp 7520 wireless printer does not recognize black photo ink

    brand new 7520 hp photosmart wireless printer . i set it up put in all set up ink cartridges correctly. machine says missing cartridge shows photo of black photo ink . this machine is not recognizing the ink. i heard it snap in and i see it but this wireless photosmart 7520 wireless printer is not smart enough to recognize its own set up photo black ink ive tried everything i even went to staples and purchased a new  photo black ink. put it in and again it states that it is missing. any suggestions before i throw it in the trash where a stupid machine belongs many thanks

    Hello @notrevo157,
    Welcome to the HP Support Forums! I see you are setting up your HP Photosmart 7520 and it is not recognizing the Black setup cartridge. You have tried replacing the cartridge with no success.
    I would like you to start troubleshooting here: Ink Cartridge Problem: An 'Ink Cartridge Problem,' 'Incompatible Ink Cartridge,' or 'Ink Cartridge F..., I understand you may not be getting this exact error message however these are the steps I would like you to do to try and resolve the issue you are experiencing.
    If after the troubleshooting you are still experiencing the issue, I would call our technical support at 800-474-6836 as you may need the setup cartridge replaced. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Keeping 1 photo selected for printing AFTER editing

    I still haven't adapted comfortably to iPhoto '08, because it's hard to change one of my iPhoto habits. Previously, after selecting a photo to edit, I'd click DONE and then go straight to File>Export or File>Print to output the edited photo. With iPhoto '08, no photo is selected after clicking DONE, but my habit is still to go straight to File>Export or File>Print anyway. Only after the export or print process begins, with a report that iPhoto has 86 photos to transfer, do I remember that iPhoto 08 acts as if the entire album or event has been selected after an Edit session--even if I only edited a single photo.
    Software design should be incremental, not decremental, for the workflow to become more efficient. I think Apple knows this, so it must be something I'm overlooking. A preference setting, maybe? Can anyone offer a suggestion so that I don't waste more time (and photo paper and photo ink) having to reverse an ingrained habit? I'm a semipro photographer and this habit has been established over several years and versions of iPhoto, with thousands of images. Photoshop is great for only a portion of my photos...iPhoto can do the basics better and faster.
    Thanks for any helpful suggestions.

    I hardly ever use the Events mode, but I tried it just now. The yellow selection box stays after editing in Events mode, so it works there.
    I went back into Photos mode, double-clicked on a photo to edit, just clicked Done without doing any editing, and the single photo stayed selected. It's when I actually do something (rotate, enhance, straighten, adjust, etc.) that clicking Done gets me back to the thumbnails without the yellow selection box.
    The more I think about it, the more I think the iPhoto app and/or one of its components has gotten corrupted. Now, if I can only find my iLife '08 DVD to re-install iPhoto, I'll let you know what happens. In the meantime, I'm going to try removing preferences to see if the problem lies in a plist file somewhere.
    Thanks for the great ideas! Appreciated.

  • Unable to print colors with my photo ink hp348 on HP C3180

    Hi,
    I've been using HP C3180 for several years now, mostly to print pictures and scan. I have always used original HP ink. Few months ago my scanner stopped working, however it was successfully repaired in the HP service. I dont know if this is related, however since that time I'm unable to print colors with my photo ink 348...
    First of all - when I put only the photo ink into the printer, I get the 'e' error message and the 'check color ink' as well as 'copy' buttons are blinking on the device.
    When I put the color ink with my photo ink into the device they stop to blink and the 'e error message' dissappears- however the colors are being printed from the color ink, not from the photo one - which makes a huge difference - but Im sure you know that.
    I used to print with this printer in the past with only the photo ink inside, and it was printing colorful pictures, and I did not get any error messages, with one ink inside..
    Please help me fix this issue
    also - I do have the option to print in color ticked - so this is not the case
    it looks like the printer does not recognize the photo ink and it treats it as a black ink.....(but I can assure that it is the photo ink)...

    Hi,
    Seems like you have issue with the photo ink cartridge. Try to call HP support for potential replacement.
    Hope it helps
    While I am an HP employee, I am not a expert on all our products. If I offer advice, I'm not speaking for HP on how to solve an issue, but I'll do my personal best to help you.Was your question answered? Mark it as an Accepted Solution! See a great post? Give it a Kudos!

  • Why does my photo ink cartridge drain when I'm not printing photos?

    I usually use grayscale mode to print out text-only documents and occasionally use the ColorSmart sRGB option for color documents. I have an XL black ink cartridge installed, along with the three color cartridges and a photo cartridge (bow tie). Even with this usage pattern, it seems my photo cartridge needs frequent replacing. Also, I can't print out a text-only document in grayscale when the photo cartidge is low--even if the XL cartridge is new. This doesn't make sense to me. Is there a setting I need to change so my printer draws from the XL cartridge instead of the photo? 

    Hi, What is your printer ? Grayscale option will use all colors and mix together to make black therefore it uses photo ink (black) more than normal black. If you wish to use black ink only, you need to select Black ink only from Grayscale options (pull down in Set Preferences). Regards.

  • Replacement ink for 6525 photosmart

    I bought replacement ink 564xl, all four colors and the black one dosen't fit, why? Can't I get a xl in black that will fit this machine?

    Which Black XL is it?
    New Smaller Body for HP 178, 364, 564, and 862 Black XL Ink Cartridges
    http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&lang=en&docname=c02750681
    Photo Black Ink Cartridges Renamed Photo Ink Cartridges
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=ie&lc=en&docname=c01839024
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • How Do I Use One PC (Windows) To Run iCloud Photo Stream for Two Users?

    How Do I Use One PC (Windows) To Run iCloud Photo Stream for Two Users? I and my wife have two Iphones (iOS 6.1.4) and we want to have use 2 iCloud accounts for one PC.

    Disregard the question. The solution has nothing to do with any "Firefox bug". Turns out that my session wasn't being managed properly. Or rather, I was accidentally deleting other users' information when new users logged in. So if I had user 1 and user 2, and user 2 logged in after user 1, some of user 1's information would be deleted, resulting in the errors.
    Oops; sorry about the false alarm. :)
    (Was hoping to retract the question, but it looks like others have a similar problem.)

  • Inking for Windows Phone 8.1 (Not Silverlight)

    Is there any way to use Inking for Windows phone 8.1 application. I am able to use it in Silverlight application for freehand drawing.
    But is there anything available to use for this purpose in WinRT?

    Hi Morichi,
    As far as I known in Windows Phone 8.1 Runtime there is no such a Inking api or control as in Windows Phone 8.1 Silverlight app. If you want to implement the inking function in Windows phone 8.1 Runtime application, please try to refer to
    the @Rob Caplan - MSFT's reply in this thread:
    http://stackoverflow.com/questions/28862500/inking-for-windows-phone-8-1-not-silverlight .
    Best Regards,
    Amy Peng
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • Fglrx + xrandr extended desktop + ATI 7970m = jitteryness

    For lack of a better term I get jitteryness whenever I extend my laptop's desktop to an external monitor using Xrandr, when using Catalyst/fglrx. It behaves a little differently depending on whether or not I'm using 3d rendering. For instance: * In g

  • Drill Down report in Discoverer

    Hi All, i have to create a Drill Down report in Discoverer and i am not aware of it at all. If anyone can please provide me with some pointers on how to create a Drill Down report it would be of great help. Regards, SK

  • Multitrack session import/export

    So I've been using audition since it was CoolEdit back in the 90s, and nowadays I work in film. I was excited about the release of CS5 and downloaded a trial as soon as possible, but I'm quite disappointed. why? It's still impossible to move multitra

  • Substring Algorithm

    Hi, I have been given a practice problem involving dynamic programming and i would appreciate some help If you are given 2 strings, str1 and str2, find the longest possible common substring. So, for example, if given the strings 'rebublican' and 'dem

  • My iphone isnt recognized by my computer

    I am sure this has been asked a million times, but I have checked all connections and nothing works.  I am trying to set up a new IPhone because my old phone's camera doesn't work anymore.  I just want to save my pictures!  Please help??