Photo Merge not working in CS4

I use Lightroom 2.3 on a MacBook Pro. When I go to "edit in" and choose "merge to panorama in photoshop", photoshop opens and the "photomerge window" comes up. I select auto merge for the 3 selected photos and click ok. Then, nothing happens. No new file is created and no activity takes place. I used to do this from Lightroom to Photoshop CS3 and it worked fine. Since installing Photoshop CS4, it does not work.
My Photoshop CS 4 performance settings are: memory 90% (or 2764 meg) and two scratch disks - the macintosh hd (89 g) and external drive (450 g). Open gl is not enabled.
Any help would be appreciated. Thanks.

Kennedda wrote:
My Photoshop CS 4 performance settings are: memory 90% (or 2764 meg)
That means you probably have 3GB of RAM installed. A 90% memory allowance to Photoshopunder these circumstances is clearly excessive. Try reducing it to 70% or less.
Kennedda wrote:
and two scratch disks - the macintosh hd (89 g) and external drive (450 g).
Make sure the EXTERNAL drive is designated as the PRIMARY scratch disk drive. You don't have much left on your boot volume; how large is it in total? Once a drive, any drive, gets to be 70% or so full, you're courting trouble.

Similar Messages

Photo Merge not working

The Hide and Reveal Brushes in my Photo Merge, Compose action is not working. I have tried many different photos and it won't work on any of them. The rest of the functions work just not the Hide and Reveal Brushes. Help!

Kennedda wrote:
My Photoshop CS 4 performance settings are: memory 90% (or 2764 meg)
That means you probably have 3GB of RAM installed. A 90% memory allowance to Photoshopunder these circumstances is clearly excessive. Try reducing it to 70% or less.
Kennedda wrote:
and two scratch disks - the macintosh hd (89 g) and external drive (450 g).
Make sure the EXTERNAL drive is designated as the PRIMARY scratch disk drive. You don't have much left on your boot volume; how large is it in total? Once a drive, any drive, gets to be 70% or so full, you're courting trouble.

IPhone 4 Photos Accelerometer not working

I just received a new iPhone 4 and the Photos application appears to ignore the accelerometer and is always stuck in portrait mode. All other apps work fine, just Photos is not working. This is a new phone setup, not a restore from a previous phone. I have triple checked that the screen rotation lock is off and I've turned off photo sync in iTunes, deleted all photos and re-synced; it still does not work. Anyone have any ideas?

1) Press and Hold the Home and Wake Sleep buttons until the Apple Logo appears.
2) If that doesn't work, try a reset, To reset go to Settings, General, Reset, Reset.
If it still doesn't work, take it in to an apple store so the expert can test it out.

Script that worked in CS does not work in CS4 - multiple open page, print , pdf export and close

I had a script that worked great for me in Indesign CS. But now does not work in CS4. Anyone knows what needs to be done to make it work again ?
When I drop folder with indesign files on top of this script:
1. opens first page
2. turns specific layer on
3. prints using preset
4. exports using preset
5. close without saving
6. next page
Anyone who can give me solution or idea how this should work is greatly appreciated.
on open sourceFolders
repeat with sourceFolder in sourceFolders
tell application "Finder"
try
-- If you would like to include subfolders, you say - every file of entire contents of folder…
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias list
on error -- work around bug if there is only one file
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias as list
end try
end tell
if idFiles is not {} then
tell application "Adobe InDesign CS4"
set user interaction level to never interact
repeat with i from 1 to count of idFiles
open item i of idFiles
tell document 1
try
set visible of layer "ImagesTag_Layer" to true
end try
set myPreset to "letter size" -- name of print style to use
with timeout of 700 seconds
print using myPreset without print dialog
end timeout
set myPreset1 to "pdf preset name" -- name of pdf export style to use
set myName to the name -- name includes .indd should remove at some point
with timeout of 700 seconds
export format PDF type to "users:temp:Desktop:pdf:" & myName & ".pdf" using myPreset1 without showing options -- set path here format ComputerName:Folder1:Folder2:......:FileName.pdf
end timeout
close without saving
end tell
end repeat
set user interaction level to interact with all
end tell
end if
return 10 -- try again in 10 seconds
end repeat
end open

(Disclaimer: me not an AS guy!)
First thing I noticed is the interaction level is set off. If you comment out this line
set user interaction level to never interact
you might be able to pinpoint the exact error -- ID will display a standard "failed" dialog, hopefully showing the line that it fails on.
A quick question: the script assumes two presets in your InDesign: one for print ("letter size") and one for PDFs ("pdf preset name"):
set myPreset to "letter size" -- name of print style to use
set myPreset1 to "pdf preset name" -- name of pdf export style to use
Do these actually exist in your CS4, with the same (non)capitalization and spaces?

Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

Next time you open the photos application hold down both of the keys suggested and then launch the application in the usual way. If you do this you will be presented with the opportunity to repair your library.

Camera Raw 5.1 downloaded and unzipped but not working in CS4. Can't open Nikon D90 NEF files.

Camera Raw 5.1 downloaded and unzipped but not working in CS4. OS Windows 7. Can't open Nikon NEF files. Camera Nikon D90.

update the adobe program that needs cr 4.6+, http://www.adobe.com/downloads/updates/

Photo stream not working after upgrading to maverick please help?

have upgraded to Maverick from osx lion
sooo much trouble ......memory low
photo stream not working
everything slow
any ideas?

On your Mac disable Photo Stream in the System/iCloud preference pane
and in iPhoto's Photo Share preference pane.
Reboot and reenable both respectively. That should jump start Photo Stream.
OT

Photo Stream not working today!

Photo Stream not working today!
I turn off all devices (iPhone, iPad, iMac), i reset iCloud.com -> Photo Stream, but not working.
Is Photo Stream service down? (all other services in iCloud is working)

Hi..
Try deselecting the box next to: Automatic Import
in iPhone > Preferences > Photo Stream
Then try deselecting Photo Stream in System Preferences > iClould then reselect to reset.
iCloud: Photo Stream FAQ

I just installed Lion on my iMac and Photo Booth not working. What should I do?

Please provide me guidance how to solve problem. Just installed Lion to my IMac then realized that Photo Booth not working. If I need to reinstall the application, how?
Thanks
Duangarthit

I had same issue and went back to snow lepard, there was a known issue with Lion and a patch was issued last wednesday for Lion it may be ok if you update it I dont know

Facetime,App store and photo booth not working OS X

Facetime, Appstore and Photo booth not working OS X

I would recommend first doing a PRAM reset. You can find instructions for that in https://discussions.apple.com/docs/DOC-3603.
Please let us know if that works or not, there are several other things you can try.

Photo Booth not working after installing Snow Leopard

unable to open Photo Booth after installing Snow Leopard. pop up saying my version is 2.03. unable to locate an update on App store. Any solution. ? Thanks to all

that answered my question. great. my wife has a macbook pro 13 inch (aluminum unibody) and she was getting frustrated with photo booth not working. i was about to uninstall but this answer fixed the issue. thanks!

Set Stroke weight for a frame not working in CS4.

Hi All,
How to set Stroke weight for a frame.
I tried using CreateStrokeWeightCommand of IGraphicAttributeUtils, but its not working in CS4.
Regards,
Jasmine
Message was edited by: Jasmine_Shaikh

Hi All,
CreateStrokeWeightCommand of IGraphicAttributeUtils works only when if the frame has some stroke weight already applied to it.
So do i need to set something else before using CreateStrokeWeightCommand to make it work programatically on a frame with no stroke weight.
Jasmine

Why does photo stream not work on 4g

Hi, I have a iPhone and a Mac and an iCloud account, but why does photo stream not work on 4g, but as soon as I connect to wifi, it send photos to photo stream, can please tell why it does not send photos to photo stream when on 4g, thanks.

The data requirements for sending potentially many photos can be too taxing/costly on a carrier's data plan.

HT4906 my i photo is not working how do i fix it?

Hi Friends,
I was unable to make DVD, so I went to apple Store and they downloaded Idvd for me, Now I can create DVD, but now i realize my I photo is not working.
I stay far from Apple Store, and It is not convinient to visit the store again. I am trying to update softwear, but it is not working as the softwear was updated In apple store with support ID, so now If I go for softwear update, it is asking for same support login ID of the store which I do not have and in absense of it I am unable to update I photo.
Is there any suggestions you can advise...

You need to contact that store, because you will never be able to update without sorting out that login ID.
What does "not working" mean?

Links in photo album not working

Hi, I created a prototype Web Site using DW CS4 and used Fireworks for a photo album. I used the command in Dreamweaver "create web photo album" which ran successfully. When I created the album I told Dreamweaver to put navigation links on the page when displaying a photo. The 'back' and 'next' buttons work but the 'home' button doesn't work. I discovered that it is trying to link to a page that does not exist and if I edit the address bar in my browser I can get it to work. I would like to know where in Dreamweaver you can go to edit where this link sends the user to.
Thanks in advance

Hi. Thanks for the quick response to my questoin. I have looked around but cannot locate the home page button in dreamweaver but the buttons I am talking about do not show up when you are looking at it in the design view. The button that I am talking about is only shown when you click on a picture thumbnail in the album and it takes you to the picture. Above the picture is a previous, home, and next button. This home page button takes you to the photo album not my actual site's home page. I renamed the file created by fireworks from index to pictures because I already had an index file. I believe that is what is causing the problem but I do not know how to change the link locations because like I said they do not show up in design view.

Photo Merge not working in CS4

Similar Messages

Maybe you are looking for