Photo messaging only working for iMessage users.

Alright so my phone plan,allows me to photo/video message to any phones, but recently I am only able to send photos/videos to iMessage users. Please help.

Do you have MMS turned aon in settings/messages? IS MMS provisioned for you by your carrier?

Similar Messages

Flash only works for one user

Using IE7. I have three users on my computer. All
have Administrator level access. Flash only works for one of them.
When attempting to play a video on YouTube for example it says "You
either have JavaScrip turned off or an old version of Adobe Flash
Player."
JS is turned on and the current version of Flash Player is
installed.
So does anyone know what is going on here?
Thanks

I was able to fix my problem of Flash only working on user
account. I did the following two steps to correct the problem:
1. First uninstall the Adobe Flash Player plug-in and ActiveX
control by following the instructions stated in
tn_14157.
2. Second Download SubInACL from Microsoft to fix permission
issues that prevent the Flash Player installation by following the
instructions stated in
fb1634cb.
Following the above two steps, fixed my problem of only
having Flash run on only one user account. Now it runs on all four
user accounts.
As a side note: The Flash Player plug-in and ActiveX control
would not run in user accounts with Limited access. But when I set
the permission of the user account to administrative, then Flash
would work.
Regards,
Bob

Audio only working for one user at a time - flash is the cause

but what is the solution?
OSX 10.6.8
flash player 10,3,183,10
If one user is listening to something via some kind of web (flash) media player, and the other user logs on, then this 'new' user is unable to listen to anything at all - all audio is blocked - not just web stuff
I know flash is the cause as I can go to task manager and kill the other person's flash plug in and the sound comes on instantly
I've tried reinstalling but no joy
How can I fix this?

I've reinstalled flash and checked that I have the latest version but this is getting ridiculous
Everytime I want to use skype or itunes or iplayer, I have to log in as the other user, close down all their web browsers, then go back to my account to get it to work, much to the annoyance of the other user.
Flash now: 11.1.102.55
OSX: 10.6.8

Flash player only works for user account installed with

Hi all
I've different user accounts on my PC for me and my son.
Somehow Flash Player 10 only works for the user account I installed Flash player with.
In case I install it using my account it will not work for my son's account and vice versa.
How can I solve this?
Thanks
Mario

I've struggled with this for a long time. Here is what I've come up with.
Adobe tech support recommended this:
1. Log in as Admin
2. Download the following zip file from here:
www.supportflash.com/reset_all.zip
3. Unzip this folder onto your desktop.
4. Drag both files ‘reset_min_all.cmd’ and
‘subinacl.exe’ to your
desktop.
5. Run the reset_min_all.cmd file.
6. It will open a DOS like terminal and start
running through registry
keys.
7. When it is finished it will say “press any key
to continue”.
8. At this point you can install the latest Flash
Player:
for Internet Explorer:
http://www.adobe.com/support/flashplayer/ts/documents/tn_19166/Install_F
lash_Player_9_ActiveX.zip
other browsers:
http://www.adobe.com/go/getflashplayer
9. Check that Flash Player is working for the
Admin.
10. Check that Flash Player is working as the
other 2 users.
I hope this information helps. Feel free to reply
if you need further
assistance on the issue discussed here or file
a new case if you want to
report a new issue in the Support Portal:
<(><<)
>http://www.adobe.com/go/supportportal>
Thank you.
Regards,
Technical Support Engineer
Adobe Systems, Inc.
I can't recall whether I had to run this in each account or not. It somewhat worked for me. If the accounts were all set up as admin accounts, flash worked in all the accounts after that. If one account was admin and the rest were limitied (I'm running xp home) it wouldn't work in the limited account.
I gave up and reverted back to flash player 9 via NOrton go back
It must be a permissons issue of some sort. I just don't have the patience to figure it out.
Good Luck,
Let us know what you figure out

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

J4W 10.5 Login only works for users with associated device

Hi all,
I just discovered that using J4W 10.5 and service autodiscovery, the login only works if the user has an Device associated.
Means that login is not possible if the user has only a controlled device profile.
We are using 10.5.1 Build 43318 - Is this a known Bug, or is this working with a different version?
Regards,
Peter

Which form of Service discovery are you using? Is it _cuplogin or _cisco-uds? Do you use a jabber-config.xml file? What is the directory source selected for Jabber, is it CUCM or AD?
Recently i had worked on a case with the following Scenario and opened a Defect for it : CSCup74253
Conditions:
With the following setup Service discovery fails and user has to manually login in Jabber specifying the IP address of the CUP server Service Discovery method : _cisco-uds or _cuplogin Directory connection type : UDS selected on service profile for the jabber user (no XML used) CUCM and CUP version : 9.1.2 Jabber version:9.7.0 and 9.7.1 End user page in CUCM : under controlled Devices only a Hardphone is selected with owner user id populated on device page of the phone in CUCM.
This BUG is solved for Jabber 10.5.1. But in essence if you do not select ANY of the device be it soft-phone or hard-phone under user> controlled devices for that matter Serivce discovery will fail.
Thanks
Tapan

ADE suddenly quit working for all users on my Vista computer. What should I do?

Please help.
Adobe Digital Editions quit working for all users on my Wndows Vista computer after I tried several times to install a book that wouldn't install. The book is one of three I recently purchased even though the other two installed with no problem. Other books were already installed.
I uninstalled and re-installed ADE with the latest version and tried again after clearing out the "My Digital Editions" folders by moving the contents elsewhere. The same problem occurs with all users on my computer.
The program runs showing no books or bookshelves despite contents in the "My Digital Editions" folder. If I try to "Add to Library," the program shuts down and shows nothing- not even an error message when re-run. Even though I'm only able to create a bookshelf, no bookshelf appers when the program is re-run.
I even tried de-authorizing and re-authorizing my computer.
What should I do?

HI
Whilst your Apple ID (presumably the @mac.com) may have been the original and been linked to @me.com at the MobileMe period and then to iCloud (@icloud.com) you need to keep to the same Apple ID through out (the iMessages server seems to treat them as different IDs to some extent).
In the Finder use the Go Menu > Go to Folder and enter ~/Library/Preferences
Find and Drag to the Trash com.apple.ids.service.com.apple.madrid.plist
On the iPhone remove those emails that are not the Apple ID in use.
On Restarting the Mac version you will have to re-enter the Apple ID.
If you then restart again you should get the pop ups to say what the iPhone is using (linking the iPhone number to the Apple ID)
Once you enable Text Forwarding on the iPhone then the Mac Version should generate and show you the Code to then enter in the iPhone's dialogue box to pair the devices.
If each Contact is turning red as you try to Send and reporting that the Contact is "Not Registered with iMessages" then you have a different issue.
This is caused by a partial login to the iMessages server and it seems it is one of those that only contacting Apple Support and saying you have an Account issue with the iMessages server from your Mac can it get sorted. (make sure you say it is an Account issue)
Of course it is the iPhone that is actually sending the SMS messages so it does need to have Carrier service at this point.
8:56 pm Monday; October 27, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Creative Zen Nano Plus Media Explorer only works for administra

Creative Zen Nano Plus Media Explorer only works for the administrator account; for other users the message "The Zen Nano Plus is not connected. Please connect your Zen Nano Plus to the computer." is displayed, but it *is* connected and works under other programs.
Version is .0.03.
Thanks for any assistance.
Edit: System is XPMessage Edited by zigkill on 0--2006 06:23 AM

RMskater wrote:I think you need to change the permissions to "Everyone".
How exactly do you do this? I checked this out tonight - when I logged onto my PC using my son's Limited User account (XP Home, BTW) I could connect his N200 and see it in Device Manager and Windows Explorer but both Creative pieces of software (CMS and N200 Media Explorer) did not see that it was there!
I tried setting the Run As... properties for the CTMS.exe file to run as one of the Admin user accounts but kept getting an error about being unable to find a specific file (which is in the Media Explorer folder!). When I went back to using the current user the error stopped. Perhaps I need to set the Run As.. options on that file as well?
As we don't use DRM'd music this isn't going to be a problem but it would be good to find out the cause of this once and for all.
I'm going to see if WMP0 has problems as well or if it's just the Creative ap
ps.
PB

Fingerprint utility is not working for normal users - Tecra M11

Hi All,
I installed windows 7 pro in Tecra M11 laptop and the Toshiba finger print utility is not working for normal users.
It is working only for domain administrators. The TFPU is not working for, normal domain users, local users, local administrators. If we run the utility it will ask to enter the windows password and once we applied the password then the message saying "entered password is not valid" will prompt even if we are trying to use the utility first time.
If we try with a domain admin account it will work without any problem. Can somebody help me to trouble shoot this issue?
Thanks.

People nowadays experienced that no matter How many times we glide our finger it have no response.In this instance, you might be very afraid of Windows password lost by reason that there is a plenty of important data on your PC.
Then what should you do? One choose is fix the Fingerprint scanners, but this method will cost a lot of money. The other is use the Windows password function to solve the problem. Certainly, this is a very safer, faster and easier to use method for you.
According my personal experience, you can try these three ways to re-access to your PC:
Method 1: Login with the default administrator account
* Step 1: Start Windows PC
* Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
* Step 3: Type Administrator as Username and leave the password field blank
* Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.
*Note:* This trick is only work for Windows XP. And when you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.
Method 2: Use the previous password reset disk
This method describes how to create and use a password reset disk for a computer that is a member of a domain. You can use a Windows password reset disk to gain access to your Microsoft Windows Professional-based computer if you forget your Windows password. Please click here to learn more.
Method 3: Using Windows Password Unlocker
Using Windows password remove software is could be the fastest and easiest way for you to reset your Windows password while you didn't create a password reset disk before.
There are 2 options for you: recover Windows password with a bootable CD/DVD or recover Windows password with a USB flash drive.
Before starting, a bootable CD/DVD or USB flash drive and a computer with CD drive are required. (Internal CD drive and external CD drive are both OK.
Option 1: Recover Windows password by burning a bootable CD/DVD
Option 2: Recover Windows password by burning a USB flash drive
The whole Windows password recovery process can be divided to 3 big steps:
* >> Step 1: Burn a USB flash drive to remove lost Windows password
* >> Step 2: Set your target computer to boot from USB
* >> Step 3: Recover forgotten Windows password with the burned USB flash drive
In fact, all you need is a *Windows Password Unlocker www.passwordunlocker.com/windows-password-recovery.html which can help you directly reset your windows xp password, and then you can login your XP without a password required. Of course, there are also some other ways to do it, but this way may be most convenient one.

Outgoing server works for one user not for other

Hi,
I just made a second user in Leopard. When logged in as the original user, the outgoing mail server works fine in Mail. When logged in as the new user, the outgoing mail server shows as 'offline' in Mail. In both cases the outgoing server is the same one.
As the new user i can only receive mail and not send any. I am pretty sure the account settings on both mail accounts r identical(Authentication, SSL etc.) (except for user specific identification of course)
Any advice/idea on what is wrong and what i can do to make the outgoing server work for both users?
Thx,
Brick

Yes I am certain the authentication is correct. When trying to send a message out Mail gives a message saying my "SMTP server does not support authentication".
When i open Mail preferences. The outgoing server is indicated as Offline.

Content search webpart in sharepoint 2013 paging is not not working for anonymous users on IE9, IE10 and Firefox

Dear All,
Issue in CQWP paging on IE9, IE10 and Firefox
We have created CQWP in SharePoint 2013 for images rollup and its paging perfectly working for authenticated users on all browsers but it’s not working on public facing site for specific browser
while we are trying to click on paging getting
something went wrong and correlation with correlation id
We did log analysis and getting different kind of problem description on every click some time contents authentications error, sometime memory
Once I put webpart inside the  its completely stop working
  so we placed webpart outside  currently
Strange point is its working on IE11. Please help us its highly appreciated
Code Details :
<div data-name="WebPartZone">


<div xmlns:ie="ie">




</div>




                        

<div ms-webpart-chrome-fullWidth "><div webpartid="00000000-0000-0000-0000-000000000000" haspers="true" id="WebPartWPQ1" width="100%" noindex
" onlyformepart="true" allowdelete="false" ><div style="display: none;"></div><div componentid="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_csr"
id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_csr" style="display: none;"></div><noscript><div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_noscript">It
looks like your browser does not have JavaScript enabled. Please turn on JavaScript and try again.</div></noscript><div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48"><div><div
id="WebPartWPQ2_ChromeTitle"><span title="" id="WebPartTitleWPQ2"><h2 style="text-align:justify;"><nobr><span></span><span id="WebPartCaptionWPQ2"></span></nobr></h2></span></div><div
webpartid="00000000-0000-0000-0000-000000000000" haspers="true" id="WebPartWPQ2" width="100%" ms-WPBorder noindex ms-wpContentDivSpace " onlyformepart="true" allowdelete="false" ><div componentid="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00_csr"
id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00_csr"><div id="DataProvider" name="Control"></div></div><noscript><div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00_noscript">It
looks like your browser does not have JavaScript enabled. Please turn on JavaScript and try again.</div></noscript><div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00"></div><div></div></div></div></div><div></div></div></div>

      </div>

Hi,
In the “Property Mappings” of the Content Search Web Part, we can see that the Picture field will only display the value retrieved from “PublishingImage;PictureURL;PictureThumbnailURL”,
because there is corresponding column in OOTB Document Library holds the valid value of a thumbnail image for a document, that’s why documents from Document Library display no thumbnail image in a Content Search Web part.
If you want to display thumbnail images for documents of Document Library, you can add a custom Picture column to hold the thumbnail image of a document, set the “Property
Mappings” to display this custom Picture column.
By doing this, every time uploading a document to this library, setting a thumbnail image(provided by common users, not generated by SharePoint automatically) for
that custom Picture column, in the Content Search Web Part, the thumbnail image will display.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

After Upgradation BPF is not working for some users

Hi All,
We have recently upgraded from BPC 5.1 to 7MS SP7. we are having multi server setup with one application / reporting server (windows 2003 and one sql server 2008 (windows 2003 64 bit).
Intially before upgradation we don't have any issues with BPF and it worked fine for all users. But post upgradation tasks within the BPF does not work for other users except for the first two people who first used it. Other users have the same rights as the ones who can access the tasks.
when they click on the link it gets them to eExcel and the right application but doesnt open the package or report assigned to the task. It doesn't give us any errors, on the status bar we get a message finalising but does not getting any thing.
Any inputs ??

Hi,
Are you sure that those users have installed BPC 7 SP7 clients on their machine? Meaning that you uninstalled 5.1 clients and installed the new client from http://servername/Osoft?
If yes, you should maybe run a client diagnostic on the machines and also check the Management Console for any error messages.
Hope this will drive you to a potential solution.
Best Regards,
Patrick

My applications always quit...iChat only works for 4 minutes at a time HELP

ok so i bought leopard today
i installed it but i skipped that step when leopard checks the volume of your comp or whateever (not sure if that will affect what im about to say)
now i have leopard...i love it but my applications just KEEP quitting out and my iChat only works for 4 minutes and then my friends stop recieving my messages
should i uninstall and re install?? how would i go about doing that??
anything just please help

One possibility is that your hard drive is failing. If you don't have backups of any data you don't want to lose, that needs to be your number one priority. Get that data backed up. Once you have done that, you can start exploring options.
Open Disk Utility, select your hard drive and take a look at the SMART status:
If it says anything other than Verified, the drive is definitely failing. If it says Verified, all that means is that it isn't failing in a way that the drive can detect.

Outlook Anywhere not working for some users

Hi All,
I am having a strange issue today with a customer -
Outlook Anywhere has been enabled on their Exchange 2010 environment, but it doesn't work for some users.
Using the ExRCA I have been able to identify the following error on the users who are unable to connect:
"Testing the MAPI Mail Store endpoint on the Exchange server."
"Attempting to log on to the mailbox"
Mailbox logon returned ecLoginPerm 1010. You don't have the correct permissions to log in to the mailbox.
EMSMDB Status: ecLoginPerm 1010
Elapsed Time: 225 ms.
On users that are able to connect it goes through the ExRCA without any issues.
Any help would be much appreciated.
Cheers,
Jack
Testing the MAPI Mail Store endpoint on the Exchange server.
An error occurred while testing the Mail Store.
Additional Details
Elapsed Time: 333 ms.
Test Steps
Attempting to ping the MAPI Mail Store endpoint with identity: outlook.mg.com:6001.
The endpoint was pinged successfully.
Additional Details
Attempting to log on to the Mailbox.
An error occurred while logging on to the Mailbox.
Additional Details
Mailbox logon returned ecLoginPerm 1010. You don't have the correct permissions to log in to the mailbox.
EMSMDB Status: ecLoginPerm 1010
Elapsed Time: 225 ms.

Hi,
I notice that this issue only impact "some users".
I suggest double confirm whether the Outlook Anywhere configuration set correctly on Outlook client. Pic as blow:
Thanks
Mavis Huang
TechNet Community Support

Mail rules work for some users, don't work for others

Ready to pull my hair out over this one:
Leopard to Snow Leopard upgrade went uneventfully, except for the fact that server-side mail rules (accessed via browser at FQDN -> Mail Rules) work for several users (two, to be exact) and don't for the rest (about 15 or so).
The usual culprits have been reviewed: 'Enable Server-Side Mail Rules' is checked in Mail -> Settings -> Filters, 'Allow users to configure server-side mail rules' is checked in Web -> Sites -> Web Services, users can create vacation notices and email rules without issue via browser, permissions look fine on the contents of /Library/Email Rules and /var/spool/imap/dovecot/sieve-scripts, logs give no indication of any foul play (at least the Email Rules -> debug.log generates the same entries for both functional and non-functional users), etc.
I have noticed that /var/spool/imap/dovecot/sieve-scripts contains only two items, which - you guessed it - line up with the GUIDs of the two functional users. Theoretically every user with a rule should be represented here.
As suggested in this thread:
http://discussions.apple.com/thread.jspa?messageID=11171395&#11171395
I created both a vacation notice and an email rule for several users, thinking that may force the folder creation for those users, but no dice. I even manually created folders for a few users with their GUIDs as the folder names and assigned each user ownership and read/write access. Still nothing. Created a few new test user accounts just to rule out any legacy account weirdness (although it's worth noting that I completely redid the OD and recreated user accounts after the upgrade) and replicated the problem with these, as well. Lastly, used Inspector to compare OD attributes between functional and non-functional accounts, with no glaring differences.
Help!

Did you find an answer? I encounter the same problem on my new MiniServer. Deleted and created all users several times, but just for some accounts mail is working.
Do you have the answer?
(new to this site, read a lot already, but not found)

Photo messaging only working for iMessage users.

Similar Messages

Maybe you are looking for