Photo not found when publishing to .Mac

Hi, I imported some photos from an external drive into iPhoto. Then I disconnected the external drive. Later when I tried to publish the newly imported photos to the .Mac gallery, I received an error that says the photos are not found and asks if I want to find the photo manually.
Does this mean that when I import photos, there is still a link back to the original location of the imported photos? Does that I mean I should copy of the originals into the local hardisk before I import them?
Cheers,
Thomas

I would have the ColorSync option checked.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Regards
TD

Similar Messages

Photo gallery not displaying when published to .mac

Hey,
I'm having some trouble publishing my photo gallery. I do not want to publish it as a web gallery from iPhoto then link to it with iWeb. What I want to do is to send a gallery from iPhoto into iWeb, and have it published as part of the website. When I send a gallery over to iWeb, it loads up great, and I have all the functionality that one would expect when doing this so by all indications, it will load up great on my .mac account. When I publish the website, it does say that it is publishing the photo gallery page, but the issue is that none of my galleries ever show up! I do not know what to do, I have tried completely deleting the photo gallery page and remaking it in case I did something wrong in the design somewhere, but it still does not load up. If I link in a web gallery, it does show up, but, again, that is not what I want to do. I am at a loss for what may be causing the error. Any help at all would be greatly appreciated.
Thanks!
Heather

Publishing a iPhotoalbum to iWeb is the same as dragging the album from the media browser to iWeb.
When I send a gallery over to iWeb, it loads up great, and I have all the functionality that one would expect when doing this so by all indications, it will load up great on my .mac account.
When I publish the website, it does say that it is publishing the photo gallery page, but the issue is that none of my galleries ever show up!
What is it? Does it upload great to dotMac or doesn't it?
There's only one thing to do. Publish it. No need to upload. iWeb takes care of that.
It helps if you provide a URL to said page.

Why is my applet not found when published by servlet-easy one?!

Hi! I have a servlet that publishes an html page with the applet tag inside it but it never finds the applet whenever it publishes the html. Can somebody please tell me where is the applet code supposed to be placed in jsdk2.1?! I placed it in the same folder as the servlets, as the .bat files, webpages, Web-inf but still it is not found. This is the Servlet code:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class chat extends HttpServlet{
     public void doPost(HttpServletRequest req, HttpServletResponse res) throws ServletException
          String user="",host="http://195.13.94.38/ChatApplet";
          try{ user=req.getParameter("user");
          PrintWriter output=res.getWriter();
          res.setContentType("text/html");
          output.println("<html><body><APPLET CODE="+host+" WIDTH=500 HEIGHT=400><PARAM NAME=user VALUE="+user+"></APPLET></body></html>");
          output.close();
}catch(Exception tru){}
I even tried to have the applet code= ChatApplet and still no success.
Thank you

I don't know if you fixed this already, but if you haven't, try:
String chat = "ChatApplet";
String codebase = "http://195.13.94.38";
out.println("<APPLET CODE=" + chat + " CODEBASE=" + codebase + " WIDTH= ........the rest of the code...>");
Give it a try and good luck.

The navigation menu does not appear when published to folder and my 12 photos are not on the site either

The navigation menu does not appear when published to a file. My 12 photos are also absent as well, just as if they wernt added.
I have tried rebuilding the site but the same problem appears. Everything else seems perfect up to tha publidhed file.
Has anyone had the same problem,
John
Message was edited by: BOURBAH

Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

The navigation menu does not appear when published to folder and my 12 photos arenot on the site eitherr

The navigation menu does not appear when published to a file. My 12 photos are also absent as well, just as if they wernt added.
I have tried rebuilding the site but the same problem appears. Everything else seems perfect up to tha publidhed file.
Has anyone had the same problem,
John

Have you tried: Trouble installing iTunes or QuickTime for Windows or iTunes for Windows Vista or Windows 7: Troubleshooting ...

Poor image quality when publishing to .mac

This is very frustrating.
I buy a high resolution, high quality, royalty-free image. I resize it and crop it in my image editing program and save it as a maximum size .jpg.
I preview the image in Apple preview, and also drag the image into my web browser and it looks crisp and sharp.
I put the image on my iWeb page and publish to .mac. I check my site and the image looks horrible! It looks as though it got compressed again on the lowest setting.
Something very weird is happening to some people. I've read other discussion on this but they are all unresolved.
I'm a graphic designer and I've used dreamweaver and published to other servers. I know about image quality and optimization. I'm doing the same steps and procedures I've always done to optimize images and I've never had this problem except when I publish to .mac.
There is a very weird and serious issue going on and I hope someone can resolve this or has an answer.
Why would an image look crisp and sharp when I view it in my image editing program or in Apple preview, but when publish to .mac it gets re-compressed?
This may sound silly but do you think Apple is doing this randomly and automatically to users to save server space on .mac? Maybe they think people wont notice or care?
I am very upset and frustrated and I can't think of any other reason why this is happening.
Any advice is helpful. Thanks!

James,
Thank you very much for your help.
Here is what I did. I used Apple grab and took a screen shot of my iWeb page where the low res graphic was in position.
I used this as a "template" for cropping my original image in my image editing program to the exact size I needed.
I cropped my original image to the size of my "grab" template, deleted the template layer and saved the sharp image as a maximum file size .jpg and placed it into my iWeb page, with "use original size". It fit perfectly in my layout and looked sharp and crisp.
Now, I published my site and checked the image.
You were correct! The image came out crisp and sharp, no more quality loss.
To test your theory, I went back to iWeb and placed an iWeb mask around the same image and re-published it.
Sure enough! The same image that was once sharp had terrible image loss.
So I guess you're right, adding any effects to an image creates the image loss.
Well, this is a terrible shame because I really like some of the border effects. For example, in a photo gallery, you can use an effect such as a slight page curl with drop shadow that appears only for the thumbnail image but the when you click on the image full size, there is no page curl, just the pure image.
If I create this slight page curl effect and drop shadow in my image editing program, then both my thumbnail and full size image will have this effect.
Not only that, but in order to get the thumbnail image to lay over my background color, I would have to re-create the page curl effect and place it on a border of the same background color as my page layout. When someone clicks on my thumbnail they will now get the full size image with the page curl effect and a slight border of the page color.
Also creating this effect in my image editing program will make it more time consuming when I want to change layout styles, because when I create the page curl / drop shadow in my image editing program, I have to change the background color around each image to match the new background color I'm using for my page. Doing this for 20 images every time I want to change my design is allot of work.
If this is what I have to do, then I have no choice. But at least I would like my thumbnail to have the effect but NOT my full size image.
How do I do this so only my iWeb thumbnail image has this effect without iWeb forcing it to a PNG and loosing quality?
Thanks I appreciate you help!

Trouble Upgrading--Photo Not Found Alert

A year or two ago, I let my brother use IPhoto on my Mac for a summer job that he had, which required him to make a lot of photo slideshows. Sometime after he was done with his job, I deleted all of his photos out of my Iphoto library. I tried to delete all his slideshows as well, but I eventually gave up, because any time I tried to even ctrl+click the slideshow to delete, IPhoto would begin to look for all of the photos in the slideshow. When the program did that, I begin to receive an error message that said "The photo suchandsuchphoto.jpg could not be opened because the original file could not be found." Then I have the choice to either select "cancel" or "find photo." The problem with this error message, is that there is no "apply to all" option, which meant that I had to dismiss the message for every single photo in the slideshow before I could do anything else.
In of itself, this was just a slight annoyance, but heres the big problem. I'm now trying to upgrade to IPhoto 11. While upgrading my photo library, IPhoto has started to look for ALL of these photos. Now in order to complete the installation process, I'm receiving the same photo not found alert. So I am having to individually clear every single one of these messages to finish the installation process. There are probably thousands of these photos, so it will likely take hours for me to clear every single message one by one.
Is there any sort of work around, or something I could do to avoid having to clear all these messages without losing my entire library?

Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Why does FCP error "File Not Found" when I try to open my sequences????

I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
I hope this helps. Now it's time to play "catch-up"
Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT Mac OS X (10.4.8)

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

Keep getting Disc Burner or software not found when trying to burn a CD

I am not able to burn a playlist to a CD and get an error at the top of Itunes window "Disc Burner or Software Not Found". I have been able to burn CDs in the past with this same computer but had some issues with songs in itunes. Support had me uninstall Itunes and reinstall. I have also uninstalled the device in the device manager and re-installed it. I really don't know what to try except to ask for help here. I would appreciate any direction I can get. I have a Dell desktop XPS running on Windows 8.

Hi daurel,
Thanks for participating in the Apple Support Communities.
It sounds like you receive the error "Disc Burner or Software Not Found" when trying to burn CDs. You mention that you've already tried removing and reinstalling iTunes, and other drivers, and these are good steps.
If the situation continues, be sure to try the tips in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install - Apple Support
Sincerely,
Jeremy

I am getting a 404 not found message on my mac before the web page closes down

I am getting a 404 not found message on my mac before the web page closes down. How do I fix this?

Is it an internal or external web page? Does this occur on all web pages? If not, post the URL of one that 404s.

I get "disc burner or software not found" when I try to burn a playlist.

I am now getting "disc burner or software not found" when I try to burn a playlist from iTunes version 10.6.1.7 on Windows 7 PC. I've not added any new burner software or made any software changes of any kind. I have NERO 8 and I checked the "burn rights" is set for "everyone".
Is the any solution?
NASA_1967

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

what happened to the initially downloaded files ? did you make a backup ? do you use time machine ?

Why does i photo not launch when i click on icon in dock?

Help why does i photo not launch when i click on icon in dock?

The icons in the Dock are aliases. If iPhoto isn't launching from the dock the alias may be broken. What you can do is first test to if iPhoto is working by launching the app from the Applications folder. Once you have determined iPhoto is OK then remove the old Dock icon by holding it down and dragging it to the desktop, it will disappear in a puff of smoke. Then go to the Applications folder and drag the iPhoto icon to the Dock and test it.

Photo not found when publishing to .Mac

Similar Messages

Maybe you are looking for