Photo Not Updating for Podcast

I have a minor issue with the Podcast app from iOS 5.1.1 thru 6.1.
The artwork for the podcasts are not updating in the app.  I listen to a lot of music podcasts and on iTunes I see the updated artwork every week.  When I sync my iPhone 5 I will see it say Updating cover for episode ### but when I play that episode podcast it will have the artwork for an older episode.  Usually for an episode that I have already deleted.
Not a huge crisis but it is annoying.  Thanks.

The feed you are checking is at
http://www.calvarygreenmeadow.com/podcasts/ccgreen-rss.xml
and though the server is being slow to respond it can be subscribed to in iTunes and shows your recent episodes as expected.
However, iTunes is looking for a feed at
http://www.calvarygreenmeadow.com/~calvaryg/podcasts/ccgreen-rss.xml
There is no file at this address. This means that since 14 November last you have been updating the wrong feed.
You need to replace the feed at this URL. Once done, you can redirect iTunes to your newer feed if you want, following the process detailed here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move

Similar Messages

  • HT201077 As of recently any photos I add to a shared photostream will not update for others. Only I can see them. How come others sharing this photo stream are not getting the new photos?

    As of recently any photos I add to a shared photostream will not update for others and I don't see the updated photos on my other devices. Only I can see them from the device that i've posted from. How come others sharing this photostream are no longer getting the new photos? My iphone (the device i'm adding from) shows 20 pictures in this shared photostream and yet 4 other people that I share this photostream album with and my ipad only show 12 photos. For the past week I keep adding photos thinking people will see them but it just won't update the new ones. Any ideas how to fix this?

    You can stop new photos being automatically added to Photostream in iPhoto from iPhoto preferences > Photostream.

  • Photo not updating

    Hi,
    The Lync Server 2013 installed and configured in our environment.
    We have imported photos to all users. All users can view the photo but some of the users couldn't view photo and other users photos.
    We have tried the following article but we are facing same issue only.
    http://social.technet.microsoft.com/Forums/en-US/d5df6c37-3efa-4359-b8db-49baf37d42f8/contacts-photo-not-updated?forum=exchange2010
    We have removed registry cache also.
    Please find the image for your reference. 
     

    Hi,
    Please run cmdlet Update-csaddressbook on Lync FE server, then delete user profile on Lync client computer, restart Lync client computer and test again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • ITunes is not updating my podcast description

    Hello community,
    I'm the admin for the Open Society Foundations podcast feed, and iTunes has not updated the podcast description or image and I can't figure out why not.  Any advice or assistance appreciated.  This is the feed with the current description: http://feeds.feedburner.com/OpenSocietyInstitutePodcast.  iTunes is updating all episodes, it's just not updating the description, which is in the xml file as:
    <itunes:summary>The Open Society Foundations work to build vibrant and tolerant democracies whose governments are accountable to their citizens. To achieve this mission, the Foundations seek to shape public policies that assure greater fairness in political, legal, and economic systems and safeguard fundamental rights. On a local level, the Open Society Foundations implement a range of initiatives to advance justice, education, public health, and independent media. At the same time, we build alliances across borders and continents on issues such as corruption and freedom of information. The Foundations place a high priority on protecting and improving the lives of people in marginalized communities.</itunes:summary>
    <description>The Open Society Foundations work to build vibrant and tolerant democracies whose governments are accountable to their citizens. To achieve this mission, the Foundations seek to shape public policies that assure greater fairness in political, legal, and economic systems and safeguard fundamental rights. On a local level, the Open Society Foundations implement a range of initiatives to advance justice, education, public health, and independent media. At the same time, we build alliances across borders and continents on issues such as corruption and freedom of information. The Foundations place a high priority on protecting and improving the lives of people in marginalized communities.</description>
    I've read through other threads here and I believe I've confirmed that iTunes is pointing to the correct feed, and that I'm using the right tags.  But, clearly I'm doing something wrong -- just can't figure out what.
    Many thanks!

    Although on subscribing iTunes is showing the contents of the 'description' tag (I thought it wasn't before. but I could be wrong) the 'itunes:subtitle' and 'itunes:summary' tags are still empty. If you've made the changes, have you uploaded the changed feed?
    When you add a new episode to your feed and upload it, it appears immediately for subscribers because their iTunes application reads the feed directly and the Store is not involved.
    However because of the huge number of podcasts in the Store (thousands) the Store caches the feed and checks it for updates periodically. For this reason it usually takes 1-2 days for new episodes to appear in the Store: sometimes it can be less, and occasionally the whole process seems to get stuck and it can take several days.
    You mention 'new episodes' but there is only one episode in the feed.

  • My Mail has frozen - can access my hotmail through Safari but Mail now has a blank rectangle on the screen and the inbox underneath it has not updated for 2 days

    Mail giving problems. Small white rectangular box comes up on screen and inbox underneath has not updated for 2 days.
    I can use Safari to get new messages but, since getting this laptop, when I go to Hotmail via Safari old messages self delete every so often, whereas via Mail messages stay in the inbox unless I actually delete them. Any suggestions?

    Here is a photo of what I see when I tap on the mail icon to open it. It stays there for a second or two and then goes dark. Then I actually have to put my iPad into sleep mode in order to use it again. The app will NOT close no matter what I do, just shutting it down or put it in sleep and then restart  it.
    here is when I tap the mail icon. It looks like an empty page but you will see the format of the mail page. Next photo is what is see after a second. And the last photo is what I see before the iPad locks up or Les blank. I hope this makes things clearer as to what the problem is. Thanks for your help, hope this helps! Diane May.

  • Itunes is not updating my podcast. its been 3 weeks now

    for some reason itunes is not updating my podcast.
    I have made changes to the feed and those changes do not show up when i view in itunes.
    my feed is located at http://freemillionairebook.com/mikelitman_podcast.xml
    as you can see there is a description for the show on the feed but when i view it in itunes it do not show any description for the episode.
    its been 3 weeks now. I have verified the feed and it do not show any errors.
    This is how itunes show it
    http://itunes.apple.com/us/podcast/the-mike-litman-show/id525820910
    I also tried to add new episodes to the feed and they also do not show up on itunes.
    Can you tell my why this is happening.
    Thanks,
    Ali

    Although on subscribing iTunes is showing the contents of the 'description' tag (I thought it wasn't before. but I could be wrong) the 'itunes:subtitle' and 'itunes:summary' tags are still empty. If you've made the changes, have you uploaded the changed feed?
    When you add a new episode to your feed and upload it, it appears immediately for subscribers because their iTunes application reads the feed directly and the Store is not involved.
    However because of the huge number of podcasts in the Store (thousands) the Store caches the feed and checks it for updates periodically. For this reason it usually takes 1-2 days for new episodes to appear in the Store: sometimes it can be less, and occasionally the whole process seems to get stuck and it can take several days.
    You mention 'new episodes' but there is only one episode in the feed.

  • Originating document number not updated for one invoice line item

    Hi,
    We have a invoice document number in which the originating document number is not updated for one of the line items ,this is order related down payment invoice .May be this is due to system inconsistency so is there any SAP note to overcome this problem.
    Best Regards,
    Rohit

    Dear All,
             I found out the problem for not updated in F-04. "While create the receipt document in GL master Open item management maintained box was not checked". It can be found in BSIS table - OI Management'.
             Is there any other way to clear this document.
    Thanks...

  • Inspection Lot Status (CROK)not updating for Certificate Reciept

    Hi
    I want to inspect vendor materials on the basis of thier Quality certificates
    1) Config Set up:
    a) Certificate type :YA72
    Cert for each PO  item :checked
    Certificate Check reqd:  :Checked
    Enhance cert processing: Checked
    b) Control key :0005 ( Delivery release ,Certificate)
    2) Material Master (QM View)
        QM Procurement : Checked
       Control Key :0005
       Certificate Type :YA72
    3) Goods Recipt
        MIGO < Purchase Data<Cert Reciept :Yes
        Inspection lot is created
    Question : Inspection lot status is not updating for Certificate Recived or not
                      My understanding is Inspection lot status should be :CROK -Certificate Recieved                                                                               
    CTCM-Certificate Missing
    Pls correct my understanding in case i am missing something
    Thanks in advance

    Is the status in the GR document have the cert field set as 5?
    Since you set the "certificate check required" you must do an explicit check of the cert.  I included below the help screen from this indicator in SPRO.
    You should be able to review the status of your cert in transaction QC53.
    FF
    Explicit Inspection of GR Certificate Necessary
    If you set this indicator, at goods receipt the system will generally perform as described in the field "Control without certificate".
    This means that even if you confirm the certificate receipt at goods receipt, and thereby set the status "2 - Certificate received", the system will still perform as specified in the field "control without certificate". See Control without certificate.
    You must explicitly check the content of the certificate recieved at goods receipt and set the status "5 - Certificate filed and inspected ", before, for example, the inspection lot status will be set to CROK.
    You can confirm that you have checked the content of the certificate in the certificate transaction or when making the usage decision.
    Note
    If you have set the indicator and chosen an unsuitable setting in the field "Control without certificate", the goods receipt can be generally blocked.
    This security function is generally used at electronic certificate receipt to check the accuracy of the certificate contents.

  • Validity Table not updating for 0IC_C03 while updating data

    Hi,
    1.Validity table not updating for 0IC_C03 while updating data in my BW 7.4 With HANA data base?
    Key fields : 0Plant
                       0Calday
    if you run this programe after loading data - RSDG_CUBE_VALT_MODIFY it is updating.
    2. I am not getting no marker update option in non-cumulative Info cube 0ic_c03 manage tab or in DTP tabs check as per 7.4 modifications?
    and  2LIS_03_BX in DTP I am getting below this option only
    Can you please give me solution for this issues.
    Regards
    Umashankar

    Hi Uma,
    Please go through the below link which might be helpful.
    Not able to Edit Validity Table : RSDV
    Marker Update Option is available under Collapse tab of Info cube.
    Thanks,
    Karan

  • I have a samsung smart tv i want to play my pogo but will not update for me

    i have a samsung smart tv and want to play my pogo but it will not updat for me what do i do

    Your Smart TV uses Google Chrome as its browser, yes?

  • KSPP -Scheduled Activity are not updated for last 2 periods

    Hi All,
    When we run KSPP by using LTP, noticed that for one cost center and activity type the plan scheduled Acivities are not updated for last 2 period's.(shows Zero)
    Do we miss any thing.
    Regards,
    Raj

    Hi,
    It can be due to the sales demand you have uploaded and the Lead time in the material master
    because of the that, the demand gets shifted before (say, Dec demand gets shifted for manufacturing in October) and the activity qty in the last month comes zero
    So, upload 14 months demand where 13 and 14th month is the same as 12th month... Most of the companies do this way
    Ajay M

  • Issue regarding 0MATERIAL_ATTR  - Attribute not Updated for Some Materials

    Hi All,
    As per requirement, I had enhanced 0MATERIAL_ATTR DS with one customer field MRP Controller.
    After enhancing 0MATERIAL_ATTR, I had made necessary changes in related objects like 0MATERIAL Info Object & related transformation for this new attribute.
    After making changes, when I had done Repair full request for 0MATERIAL_ATTR, newly added attribute had not updated for all material, other attributes were updated correctly but MRP controller had not updated for some records.
    I am confused with why attribute(MRP controller) updated in some Materials & for some materials its not updated.
    I had checked in PSA, data for this added attribute is come in PSA but not updated in data target (0material).
    I had also activated master data by running Attribute change run but still problem persist.
    Please help.
    Regards,
    Divyesh Khambhati

    Hi Venkatesh,
    I had write code in CMOD for MRP controller.
    As data is coming fine till PSA but its not updated in Data Target (0MATERIAL) .
    if I take one example..
    For exp Material XYZ has two entries in PSA table, one is updated during delta load & recent one which come though Repair Full request.
    Now newly adder attribute MRP controller available in recent request of Repair Full but that is blank in case of prior delta update.
    I am confused because MRP controller attribute is updated for some Material but for some material its remain blank.
    please help.
    regards,
    Divyesh Khambhati

  • Message server information not updated for SIDs in SMSY

    How do I get the message server information updated for systems in SMSY?
    I moved a system from one server to another but the information is not updating for the Java stack. The informatoin was updated successfully for the ABAP, but not the Java side. I've reviewed the SLD information and everything there is correct.
    In change mode the information is greyed out, so it's updated automatically somewhere.
    Thanks for any help.
    Ryan

    Hi Ryan,
             What's your solution manager version?
             Have you taken a look into this note?
             ->     1301106 SMSY: Enhancements and errors in Enhancement Package 1
            Within this note you will find another list of related notes that may fix your issue.
            Please take a look as there are many notes reporting similar issues, like:
           1298517   SMSY: Server of SCS instance not known in SMSY
           1273095   SMSY: Incorrect database server (Java)
    Regards,
    Daniel.

  • Itunes Store Has not updated my podcast for 5 months

    I have been maintaining 4 separate podcasts for about a year and I have one feed that will not update in the itunes store but if you subscribe to the feed then all of the episodes are there. I do not use any program to create the XML files, I just edit them with the required info. Any help with this would be great.
    THanks
    Here is the Feed
    http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=262138599
    Here is my XML file.
    http://www.libertychurch.net/audio/nc/podcast.xml

    Your feed is littered with <!-- and --> ; these are intended to enclose comments and prevent them being shown except when viewing the feed directly for programming purposes. They are excluding large chunks of your feed from being read. How did they get there? You should look closely at the feed (which as it stands only seems to contain three viable episodes:
    Numbers: Zhongwen Vol 1 Lesson 1
    Dixie 400: A Flea Market in North Georgia
    Jobs
    and remove any of these tags you don't need. I can't check on iTunes until tomorrow morning but I would expect it not to show the other two episodes either.
    Also FeedValidator comments 'Feeds should not be served with the "text/plain" media type' - I don't know whether this could be an issue: please see this note at FeedValidator:
    http://www.feedvalidator.org/docs/warning/UnexpectedContentType.html

  • HT201317 my photos have not updated for two days. any ideas/advice

    my pictures have not updated via i cloud for 2 days. any ideas/ advice please.

    Sign out and then back in to the iCloud control panel on your computer.

Maybe you are looking for