Photo Places are marked without internet connection

Hi there.
I was recently on vacation abroad and turned off all my internet connection services. Mobile Data, Roaming etc.
As i now looked into my Mobile Photo app all places where i took the pictures are marked. Now i am afraid, that i'll be charged with the costs for the abroad internet services.
How is it possible that Photo.app recognizes my position only with a deviation of a few meters when my mobile internet services where all turned off?
Thanks for your help, Reiner

The GPS chip uses an "assist" from WiFi & cellular tower location to speed up determining your location, but does not need either to determine your location.

Similar Messages

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Hi Bob,
I'm not certain the post I sent was posted correctly, as I added it as a reply to a 3-year old thread. Since this is a recently-active thread, though not specific to the issue at hand, I thought I'd post again:
Three years ago you helped me set up a roaming wireless network in my home. It's been rock-steady and I'm forever grateful to you for the time and guidance you gave me. I'd now like to swap out my AirPort Extreme base station for a time capsule. As I understand it, I should be able to unplug the base station and replace it with the TC without problem, so long as I use all the same settings on my TC... network name, security protocol, password, etc. Given the complexity of my network, I thought I should check with you first for any advice you might have. I don't want to set up a new network or make any changes to the existing one-- with the exception of using the TC in place of the AE. I'm already using Time Machine for backups. As a refresher, my current setup has the AE as base station and 3 expresses hard-wired with Ethernet connections elsewhere in my home. I have a 4th express set up wirelessly to use with my stereo system at the front of the house. All AXs are 'n's and are set up, as per your instructions, in Bridge mode to extend the existing network. I'm running the most updated version of Mavericks on my MBPro. Any suggestions you might have will be, as always, very much appreciated! Sincerely, Phyllis Sommers

How can I unmark photos which are marked for republish to Flickr?

I am currently using Lightroom 3 to publish photos to Flickr. I have a free Flickr account.
My problem is that I have a set of photos I am publishing to flickr. For some reason some of my photos lost their keywords, only the files on my computer lost them, the photos on Flickr still have the keywords intact. Also I applied a colour code to a couple of the photos on my hard disk that are being published to Flickr.
Now Lightroom has detected these changes and the photos appear under 'Modified Photos to repblish' the thing is the changes I made were either putting keywords back in that were already in Flickr anyway, and colour coding which makes no different to flickr. Because I have a free account if I republish the photos I will lose all the comments and stats on Flickr, so I don't want to republish them.
Whenever I click the publish button I get a warning that republishing the changed photos will lose any information on flickr and I have the option to skip them, and just publish new photos. But if I ever do want to republish a photo I won't be able to do this without also republishing all the photos marked for republish.
Is there any way I can remove these photos from the republish list?

All,
This is an issue with the LR programming, as it does NOT allow you to unmark images it feels need to be republished. Oftentimes it's only a matter of adding a keyword or tweaking the develop settings that triggers this. I for one wish that choice was available.
Here's what you can do: simply disconnect from the Flickr service. Doing so will have NO detrimental effect on the images in Lightroom or the images you have already uploaded to Flickr. What you will lose, however, is the "library" of images that you have already uploaded to Flickr. Since this is really only a collection there's no harm. Besides, if you need to review which of your images have been uploaded to Flickr at a later time, just reference Flickr. Oh, you'll also lose Lightroom's ability to download any comments your Flickr contacts make on your uploaded images. If it's important for you have that data in Lightroom, rethink the disconnect option. After disconnecting, reconnect using the same parameters you had before. Your Lightroom/Flicker collection will be cleared of all previously uploaded images and you can begin adding new images to upload.
Again, disconnecting has no effect on your Flickr content. However, if you REMOVE images from the collection using Lightroom, they will also be removed from Flickr. Please understand the distinction between disconnecting from the Service and removal of images using Lightroom.
All that being said, republishing images from Lightroom to Flickr, in my experience, should not cost you anything in terms of number of views, favorites, comments, etc. It should be seamless.
Judson Rhodes, Photographer
www.flickr.com/jrcp/show
www.judsonr.com
Date: Tue, 29 Mar 2011 09:43:18 -0600
From: [email protected]
To: [email protected]
Subject: How can I unmark photos which are marked for republish to Flickr?
Hi,
I'm using LR 3.2 and am having the same issue. I see that no one from Adobe has replied to this and that the previous reply was from August, 2010. There seem to be no answers to this one...
I have several images that LR feels should be republished, and ONE image that I want to republish. I CAN'T republish just that one image though without republishing ALL the other images.
Can someone (maybe someone from Adobe) help me with this? How can I simply UNmark the other images to not be republished? I do not want to remove them from the collection, but simply do not want to republish them at this time.
Why can't Adobe simply ask us if an image should be republished or not? Why can't they allow us to UNmark an image to be republished once it's marked?
Ideas?? HELP!
Thanks!
Steve
>

Labwiew 8 won't start without internet connection

I have Labview 8.0 installed on a NI PXI-1050 chasis with Windows XP and Service Pack 2 installed. The problem is that Labview will not load up (it locks up at finishing initialization) if I do not have the chasis connected to the internet via ethernet connection. When I connect to the internet and reboot the computer, Labview is able to start fine. The chasis is installed in a mobile vechicle and cannot always be connected to the internet. I've read that Labview 8 needs to connect to the internet to make sure the copy it is running is legitimate? Is this copy protection messing me up? Is there a way to run Labview 8 without internet connection?
Thanks.

biqbal wrote:
I've read that Labview 8 needs to connect to the internet to make sure the copy it is running is legitimate?
Where did you read this? There's an initial activation that you do when you first install LabVIEW. but there's no "phone home" each time you launch LabVIEW. I can start up LabVIEW without an internet connection.
More than likely what's causing it are services that run and/or MAX. Software firewalls installed on a computer can block this communication even it's happening on a loopback, but you said that the problem goes away once you connect to the internet, so it's likely not a firewall issue. Is the PXI chassis normally connected directly to the internet through a modem, or is it connected to a router (when it's connected)? Are you using a static IP address on your PXI chassis?

Failing to install Domain Services on a Windows 2012R2 without internet connection

Hello
i have a windows 2012r2 server without internet connection.
when i try to add the Domain Services role it failed in the Feature installation phase
i even tried to provide an alternate location from a ISO source but that didn't help either
im lost here what should i do?
i attached the fail screenshot
Thanks
Guy

What error is shown in Event Viewer when the install fails?
Is it the first 2012 R2 DC in a lower level domain?
Try installing ADDS via PowerShell:
Import-Module ServerManager
Install-windowsfeature -name AD-Domain-Services –IncludeManagementTools
The other thing that it could be is an issue with the WID (Windows Internal Database)
Check in the Event Viewer for anything to do with Service: MSSQL$MICROSOFT##WID and perhaps try this:
Adjust your domain (or domain controller if appropriate) security policy to allow “NT SERVICE\MSSQL$MICROSOFT##WID” to log on as a service, a GPO setting that can be found under Computer Configuration > Policies > Windows Settings > Security Settings
> Local Policies > User Rights Assignment.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Installing Arch on PC without Internet Connection/Slow Connection

Arch Linux requires a fairly good internet connection to set up. How can one install it on machines which don't have any internet connectivity? Is there any way to make a DVD of Arch on a computer connected to internet and having Arch setup(DE,Media Players,Codecs etc) which can then be used on machines without internet connections This would come useful for me to install at my friends place. Does anyone even has a remote solution on this?

https://wiki.archlinux.org/index.php/Of … f_Packages
https://wiki.archlinux.org/index.php/Lo … ory_HOW-TO
and, of course:
https://wiki.archlinux.org/index.php/Beginners%27_Guide
You could also install on a computer with a connection, then use something like Clonezilla to deploy it.

Create local wifi network on OS X without internet connection

Hi,
is there anyway to create a local wifi network without internet connection to play multiplayer games like call of duty on macbook pro ?

Is it safe to assume that you are connecting your MBP to a wireless router already?
If you are then all the other LAN machines should also connect to that same router even if internet access is turned off.
LAN parties are fun and they require the computers to have certain port setups for certain games.
It is possible, though I don't play COD (I'm a Battlefield man) and I can't help with the details of COD.
When my son has his friends over we use a wired hub setup and we make the laptop guys use the wired connection - it's more stable. I admit that we always use the internet. The last LAN party we had without the internet was a Battlefield 1942 setup with one computer hosting the local server (and that was years ago.)

EHP installation without internet connection

Hello, we are going to install EHP4 on our SAP ERP system.
But all our SAP systems (including SAP Solution Manager especially) are in closed network area and have not internet connection. As a result we cannot use SAP Maintain Optimizer to calculate and prepare installation sofware stack for SAPEHPI procedure.
Can we prepare this installation software stack file manually?
Can we install EHP4 without internet connection at all?

Hi, thank you for answer, Sunny.
But it's not very good news
May be I can use xml-stack file from other sap erp system which has the same version and patch level?
Theoretically I can just do some correcting (i.e. change system attributes) in this file and then put it for SAPEHPI tool. Is it possible?

Captivate 8 video feature without internet connection

Hello everyone,
I have a few questions in regards to the video hosting features. My team and I are currently looking to purchase a software to help us get started with our new product which will focus on delivering e-learning content to mobile devices in remote areas.
We are currently faced with the problem of how to package our video content in our applications. Please correct me if I am wrong but from our understandings Captivate 8, works by streaming and progressively downloading video context while the app is in use. This is a problem for us because most of our clients will not have access to internet.
Am I missing some important information as to how this work, is there some way to upload the application with the videos already package as part of the application file? Therefore making the use of the internet will be obsolete
Thanks in advance for you help.

So the entire project can be download to a mobile device and used without internet connections?
Is there anyway to also capture responses from users even without an internet connection? That could be push back to servers when clients are able to get access to the internet.
Sorry, for all the questions. We are just trying to make sure we have the right software for our project.

Do I need to be online to use creative cloud? I want to use it in the field without internet connection.

Do I need to be online to use creative cloud? I want to use it in the field without internet connection.

Creative Cloud Help | Creative Cloud / Common Questions
Do I need to be online to access my desktop apps?
No, the desktop applications in Creative Cloud, such as Photoshop and Illustrator, are installed directly on your computer, so you don’t need an ongoing Internet connection to use them.
An Internet connection is required the first time you install and license your apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
Annual members can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode.

How to keep movies purchased on my IPad, for viewing without internet connection?

How to keep movies purchased on my IPad, for viewing without internet connection?

If they were bought from itunes, Once they are fully downloaded you can watch them without any internet. They play locally.

Can Tour de Flex run without internet connection

Hi
I have installed TourDeFlex.air, but unfortunately it requires internet connection to browse the components.
Do you know if it is possible to run Tour de Flex without internet connection?

From an earlier post by Nicolas Mertens:
"here's what I got from Customer Services about this problem:
[Help] files are located in the following location:
C:/Program Files/Common Files/Adobe/Help/en_us/InDesign/6.0. Also
from that location, you can launch the file 'index.html' and this
should direct you to *the online help that you would access through
the program itself.*"
I found that the files are not at that location, but at C:/Program
Files/Common Files/Adobe/Help/en_GB/InDesign/6.0 (this is in Windows
Vista, by the way). "
Yours would presumably be at [the German equivalent of
..]/de-DE/InDesign6.0, or whatever your locale is (AT, CH...)
Noel

Install 2nd instance of Arch Linux without internet connection

I have successfully install a first instance of Arch Linux using Arch Linux ISO + pacstrap + pacman with internet connection.
I have updated to latest package database list (/var/lib/pacman/sync) and package cache files (/var/cache/pacman/pkg) in first instance of Arch Linux with "pacman -Swyu".
Next, I would like to install 2nd instance of Arch Linux without using internet connection.
I share the "/var/lib/pacman/sync" and "/var/cache/pacman/pkg" via NFS from first Arch Linux instance.
I boot the 2nd instance with Arch Linux ISO and attempt to install without internet connection. I mount the two NFS shares from 1st instance to "/var/cache/pacman/pkg" and "/mnt/var/lib/pacman/sync" respectively. I execute
# pacstrap -i -c /mnt"
to start installation.
I found it is almost impossible with current implementation of pacstrap script. The pacstrap script always attempt to update package database list with -Sy option.
I think some amendments on pacstrap script is needed to install Arch Linux without internet connection.

I made the edit by adding the option -o to do what you want.
I am too lazy for a feature request right now...
#!/bin/bash
# Assumptions:
# 1) User has partitioned, formatted, and mounted partitions on /mnt
# 2) Network is functional
# 3) Arguments passed to the script are valid pacman targets
# 4) A valid mirror appears in /etc/pacman.d/mirrorlist
shopt -s extglob
out() { printf "$1 $2\n" "${@:3}"; }
error() { out "==> ERROR:" "$@"; } >&2
msg() { out "==>" "$@"; }
msg2() { out " ->" "$@";}
die() { error "$@"; exit 1; }
in_array() {
local i
for i in "${@:2}"; do
[[ $1 = "$i" ]] && return
done
track_mount() {
mount "$@" && CHROOT_ACTIVE_MOUNTS=("$2" "${CHROOT_ACTIVE_MOUNTS[@]}")
api_fs_mount() {
CHROOT_ACTIVE_MOUNTS=()
{ mountpoint -q "$1" || track_mount "$1" "$1" --bind; } &&
track_mount proc "$1/proc" -t proc -o nosuid,noexec,nodev &&
track_mount sys "$1/sys" -t sysfs -o nosuid,noexec,nodev &&
track_mount udev "$1/dev" -t devtmpfs -o mode=0755,nosuid &&
track_mount devpts "$1/dev/pts" -t devpts -o mode=0620,gid=5,nosuid,noexec &&
track_mount shm "$1/dev/shm" -t tmpfs -o mode=1777,nosuid,nodev &&
track_mount run "$1/run" -t tmpfs -o nosuid,nodev,mode=0755 &&
track_mount tmp "$1/tmp" -t tmpfs -o mode=1777,strictatime,nodev,nosuid
api_fs_umount() {
umount "${CHROOT_ACTIVE_MOUNTS[@]}"
valid_number_of_base() {
local base=$1 len=${#2} i=
for (( i = 0; i < len; i++ )); do
(( (${2:i:1} & ~(base - 1)) == 0 )) || return
done
mangle() {
local i= chr= out=
unset {a..f} {A..F}
for (( i = 0; i < ${#1}; i++ )); do
chr=${1:i:1}
case $chr in
[[:space:]\\])
printf -v chr '%03o' "'$chr"
out+=\\
# fallthrough
out+=$chr
esac
done
printf '%s' "$out"
unmangle() {
local i= chr= out= len=$(( ${#1} - 4 ))
unset {a..f} {A..F}
for (( i = 0; i < len; i++ )); do
chr=${1:i:1}
case $chr in
if valid_number_of_base 8 "${1:i+1:3}" ||
valid_number_of_base 16 "${1:i+1:3}"; then
printf -v chr '%b' "${1:i:4}"
(( i += 3 ))
fi
# fallthrough
out+=$chr
esac
done
printf '%s' "$out${1:i}"
dm_name_for_devnode() {
read dm_name <"/sys/class/block/${1#/dev/}/dm/name"
if [[ $dm_name ]]; then
printf '/dev/mapper/%s' "$dm_name"
else
# don't leave the caller hanging, just print the original name
# along with the failure.
print '%s' "$1"
error 'Failed to resolve device mapper name for: %s' "$1"
fi
fstype_is_pseudofs() {
# list taken from util-linux source: libmount/src/utils.c
local -A pseudofs_types=([anon_inodefs]=1
[autofs]=1
[bdev]=1
[binfmt_misc]=1
[cgroup]=1
[configfs]=1
[cpuset]=1
[debugfs]=1
[devfs]=1
[devpts]=1
[devtmpfs]=1
[dlmfs]=1
[fuse.gvfs-fuse-daemon]=1
[fusectl]=1
[hugetlbfs]=1
[mqueue]=1
[nfsd]=1
[none]=1
[pipefs]=1
[proc]=1
[pstore]=1
[ramfs]=1
[rootfs]=1
[rpc_pipefs]=1
[securityfs]=1
[sockfs]=1
[spufs]=1
[sysfs]=1
[tmpfs]=1)
(( pseudofs_types["$1"] ))
newroot=/mnt
hostcache=0
copykeyring=1
copymirrorlist=1
offline=0
usage() {
cat <<EOF
usage: ${0##*/} [options] root [packages...]
Options:
-C config Use an alternate config file for pacman
-c Use the package cache on the host, rather than the target
-d Allow installation to a non-mountpoint directory
-G Avoid copying the host's pacman keyring to the target
-i Avoid auto-confirmation of package selections
-M Avoid copying the host's mirrorlist to the target
-o Do not update the pacman cache for offline installation
-h Print this help message
pacstrap installs packages to the specified new root directory. If no packages
are given, pacstrap defaults to the "base" group.
EOF
if [[ -z $1 || $1 = @(-h|--help) ]]; then
usage
exit $(( $# ? 0 : 1 ))
fi
(( EUID == 0 )) || die 'This script must be run with root privileges'
while getopts ':C:cdGiMo' flag; do
case $flag in
C)
pacman_config=$OPTARG
d)
directory=1
c)
hostcache=1
i)
interactive=1
G)
copykeyring=0
M)
copymirrorlist=0
o)
offline=1
die '%s: option requires an argument -- '\''%s'\' "${0##*/}" "$OPTARG"
die '%s: invalid option -- '\''%s'\' "${0##*/}" "$OPTARG"
esac
done
shift $(( OPTIND - 1 ))
(( $# )) || die "No root directory specified"
newroot=$1; shift
pacman_args=("${@:-base}")
if (( ! hostcache )); then
pacman_args+=(--cachedir="$newroot/var/cache/pacman/pkg")
fi
if (( ! interactive )); then
pacman_args+=(--noconfirm)
fi
if (( ! offline )); then
pacman_args+=(-y)
fi
if [[ $pacman_config ]]; then
pacman_args+=(--config="$pacman_config")
fi
[[ -d $newroot ]] || die "%s is not a directory" "$newroot"
if ! mountpoint -q "$newroot" && (( ! directory )); then
die '%s is not a mountpoint!' "$newroot"
fi
# create obligatory directories
msg 'Creating install root at %s' "$newroot"
mkdir -m 0755 -p "$newroot"/var/{cache/pacman/pkg,lib/pacman,log} "$newroot"/{dev,run,etc}
mkdir -m 1777 -p "$newroot"/tmp
mkdir -m 0555 -p "$newroot"/{sys,proc}
# always call umount on quit after this point
trap 'api_fs_umount "$newroot" 2>/dev/null' EXIT
# mount API filesystems
api_fs_mount "$newroot" || die "failed to setup API filesystems in new root"
msg 'Installing packages to %s' "$newroot"
if ! pacman -r "$newroot" -S "${pacman_args[@]}"; then
die 'Failed to install packages to new root'
fi
if (( copykeyring )); then
# if there's a keyring on the host, copy it into the new root, unless it exists already
if [[ -d /etc/pacman.d/gnupg && ! -d $newroot/etc/pacman.d/gnupg ]]; then
cp -a /etc/pacman.d/gnupg "$newroot/etc/pacman.d/"
fi
fi
if (( copymirrorlist )); then
# install the host's mirrorlist onto the new root
cp -a /etc/pacman.d/mirrorlist "$newroot/etc/pacman.d/"
fi
# vim: et ts=2 sw=2 ft=sh:

If I download Mountain Lion on my MBP , can I use the same installer file on a different computer and continue the installation without Internet connectivity?

Hi Folks,
I have just downloaded Mountain lion on my Macbook Pro(haven't installed it yet) . My question is, can I copy the same downloaded Mountain Lion from the Applications on to an external hard drive and use the same on a different computer? I am having problems with internet connectivity right now, it would be amazing if it can be installed on the iMac without internet connection.
So is that doable?
Thanks in advance

And the 2nd installation would not require internet connectivity? Except , of course during the set up and the configuration of iCloud and location based services, which I can skip at the time

I am unable to open my html files saved from mozilla firefox without internet connection...........each time it shows the error message as follows:-

I have saved some internet pages from mozilla firefox as html pages in F:/ drive....i am using windows7...whenever i open these files without internet connection....then it opens only for a short time and suddenly crashes by displaying the message like that:-
File not found
Firefox can't find the file at jar:file:///C:/Program Files (x86)/Mozilla Firefox/omni.ja!/chrome/browser/content/browser/undefinedgoogleads.g.doubleclick.netpagead/ads?client=ca-pub-7133395778201029&format=468x60_as&output=html&h=60&w=468&lmt=1346242109&ad_type=image&flash=11.3.300&url=file:///F:/UJJWAL/C%20TUTORIAL/c_arrays.htm&dt=1346323041583&bpp=19&shv=r20120815&jsv=r20110914&correlator=1346323042092&frm=20&adk=4203423324&ga_vid=377128990.1346323043&ga_sid=1346323043&ga_hid=232002736&ga_fc=0&u_tz=330&u_his=1&u_java=0&u_h=768&u_w=1366&u_ah=728&u_aw=1366&u_cd=24&u_nplug=11&u_nmime=30&dff=helvetica&dfs=12&adx=457&ady=211&biw=1349&bih=664&oid=3&fu=0&ifi=1&dtd=952&xpc=R193iApDeg&p=file://.
Check the file name for capitalization or other typing errors.
Check to see if the file was moved, renamed or deleted.
can anyone fix my problem please?

What extensions do you have installed? To get a full list, do the following:
In order to be able to find the correct solution to your problem, we require some more non-personal information from you. Please do the following:
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy all to clipboard''. Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Using the Troubleshooting Information page]].
Thanks in advance for your help!

Photo Places are marked without internet connection

Similar Messages

Maybe you are looking for