Photo Printing on laserjet

Can't find the settings for photo printing on my new laserjet m277dw ? Under paper it lists a lot of different paper types but no gloss photo paper and no photo quality settings. Help !!!

Hi -
I can't tell from your post which specific jam you are experiencing.
I found the following on the HP.com support web site at
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01450544&jumpi...
On this page are a lot of possible jam causes and solutions. This one is a description I think sounds similar to your report.
Common causes of jams
Cause: When printing on lightweight paper or on jobs with heavy toner coverage, paper is wrapping on the fuser causing Fuser Delay Jam or Fuser Wrap Jam messages.
Solution: Set the LIGHT MEDIA optimize mode on the Print Quality menu to ON .
Although I am an HP employee, I am speaking for myself and not for HP.
--Say Thanks by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as Accepted Solution

Similar Messages

Printing photos with Color Laserjet CM1312. Need proper printing software.

I'm trying to print photos from my Color Laserjet CM1312 multi-function printer.
I used to have a Photosmart inkjet, and tried to use the photo-printing softthat came with that printer, as I really like it. But that must have been designed just for ink-jet printers because the printouts end up way too heavy on ink density, to the point that some of the ink is actually scraped off during the printing.
What software should I be using for the color laserjet?
I don't need editing tools as I have Photoshop ... just printing tools.

OK here am I again.
as mentioned before I created an bogus printer with:
lpadmin -p test -v file:/dev/null
verified the presence of the printer;
lpstat -p
$ lpstat -p
printer Color_LaserJet_cp1515n disabled since Fri 01 Feb 2013 02:55:59 PM BRST -
reason unknown
printer hp930c is idle. enabled since Thu 31 Jan 2013 11:30:21 PM BRST
printer test is idle. enabled since Fri 01 Feb 2013 02:54:57 PM BRST
At first "test" printer was disabled for an uknown reason.
tried to use lpadmin -p test to enable the printer as described on the previusly mentioned web site, but couldn't get to enable printer "test". After reading alittle more on the internet I found the command cupsenable <printer> and indeed it changed the printer status.
tried to print;
echo test | lp -d test
result:
$ echo test | lp -d test
lp: Destination "test" is not accepting jobs.
I tried to change the condition of the Color laser printer but did not made any difference with the cups command.
Conclusion: how can I modify this status to make the printer accept jobs?

TS3147 Photos print very dark on HP1025 LaserJet, and solutions?

Photos print very dark on HP1025 LaserJet color printer. I have installed and reinstalled software several times, both from CD and HP site.
Asides from going into PhotoShop and manually manipulating each color photo, is there something simpler to correct this problem?
I have read similar comments on other boards, and have not found a solution. Is this just the nature of the beast for the HP1025 for Mac?

What system and iPhoto versions are you running? What type of Mac do you have? Have you tried calibrating the screen in the System/Display/Color preference pane.
Does the print window for the HP have any of the options that are shown in this screenshot for Epson or Canon printers?
If it does you can change the color management and color matching and color management to see if you can get what you want. Once you do you can save the settings as a Preset like the R280 Color Glossy in the screenshot.

Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section

Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section
I used Colormunkie Photo to create an .ICM file for printer calibration. When that failed I tried changing the suffix to .ICC. Under neither circumstance did LR4.2 display the file in the menu to select printer profile. There were several display files with both suffixes but no printer files at all. I tried three times with no success and cannot think of what else to try. The first two were the same. I varied the file creation name suffix in the third. Help will be appreciated. My OS is Win 7 ultimate SP1 Printer is HP 2550L laserjet.

Tillman
Glad you found your answer, Colormunki is smart enough to figure out the color space for the printer as I found out - But for quality work the latest generation of inkjet printers from Epson and Canon are hard to beat, and compared to a laserjet the quality is like night and day. The other benefit of changing up to an inkjet printer is the choice of papers available which you could not put through a laserjet.
I had a colleague that tried printing on Photoglossy paper through his color laser and it fried the fuser, and HP, while they replaced the fuser unit under warranty, made it very clear that that was a daft thing to do.
So if I were in your position I would go with an inkjet and you will then enjoy the benefits of better quality output, better paper choices and with your Colormunki be able to make custom profiles that will work in LR
Cheers
Mike

InDesign printing problem/laserjet printer or InDesign the issue?

I have a 30-page InDesign file with text and photos. Some pages print fine (I'm printing on 11x17 and 12x18 paper) and others cause my high-end printer (HP Laserjet 8550n) to spit out an endless stream of 8.5 x 11 pages with lines of gibberish courier text (some might be code, some words). I have to cancel the job on the printer and restart it whenever this happens. Sometimes if I delete a photo and re-Place it, or redo some type graphic the problem goes away. I can tell when a page is going to have this problem when the name of the file doesn't disappear from the list on my printer status window at the moment the printer starts to print. If I turn the layout into a pdf there's no problem printing it.
I sent one particularly stubborn problem page (after re-placing the photo and some text) to the company printing the job. They easily printed the page on their humble little laserjet printer.
I'm using InDesign CS4 on a 2008 iMac running OS 10.5.8. Does this seem like the problem is with my printer or with InDesign?
Thanks!

This is so odd. On this particular problem page, a couple of days ago I replaced the image 3 times and it still gave me a printer error. I copied the page from the 30-page doc onto a new, single page and still had the problem. I deleted the image and still had the problem. There are three text boxes and I deleted them one at a time and each time, all the way down to one text box, I was still having the problem. Tonight I go back to the original 30-page doc., replace the image, and the page printed out fine. Frustrating!

How to print with a Canon Compact Photo Printer CP-330?

never found a so hard issue, I'm used to plug&play hardware...
can anyone help me printing from iPhoto or Photoshop to a Canon Compact Photo Printer CP-330?
I tried with Canon's drivers, with Gimp 5, anything... one time the printer started working, then stopped after the first pass (yellow color)... frustrating...
thanks

Hi there,
If you have had no luck with the Canon or Gutenprint drivers then you may have a printer problem. Have you been able to print from it using your memory card directly connected?
If you think/know the printer is okay then I would look at the cups error log to determine why the spool is failing. This log is located in the Console application.
Paul

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

Crop to the print size before pringing
LN

Photo printing slow one line at a time

My first time printing phots on my Officejet 4620 and it is taking 20 minutes per picture one line at a time. Very frustrated. Call the help line and was told tht how this printer works.....

Many things can affect printing photos. Wireless connectivity (if applicable), paper size, print quality, software used to print the photo, printer design optimization (photo printer vs. office printer), security software used on your computer, etc.....
That being said, this photo printing document may offer some information of benefit:
http://www.hp.com/united-states/consumer/digital_photography/print_better_photos/tips/printer-settin...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Photos printing out black

photos printing almost black
This question was solved.
View Solution.

Hi, which printer model do you have?
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

My printer (HP Laserjet 2100) is no longer working after upgrading

My printer (HP Laserjet 2100) is no longer working after the upgrade; it just spits out page after page of error codes and blank pages. I've tried using both the HP driver and a generic driver. This is being accessed over a network. Has anyone encountered this problem after upgrading from Lion?

Hi,
Make sure to install the latest HP Printer Drivers 2.11 update as it should resolve a Postscript printing issue and I believe it will resolve the problem.
You may do so by clicking the Apple icon and then Software Update, you should see the update listed.
For any further issue go to Library\Printers and remove the HP folder, then download and install the following package:
http://support.apple.com/kb/DL907
Hope it helps,
Shlomi

How to lock the Printer of LaserJet Pro 500 Color MFP m570dw

how to lock the Printer of LaserJet Pro 500 Color MFP m570dw

You can set a control panel lock security level and password for your HP LaserJet series printer. To lock your printer, follow below link:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl03612

Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message Can't install the software because it is not currently available from the Software Update server.

Unable to connect to my printer HP LaserJet Professional P1102w as keep getting message Can't install the software because it is not currently available from the Software Update server. Please help.

Installing an HP network printer

ThinClient t5745 unable to print via LaserJet p1005

We just bought a HP ThinClient t5745 at my job to use mainly for printing out some sort of worksheets. We already have a LaserJet p1005 so we wanted to use that as the printer. It is possible in the setup to find the driver for the printer and it is also able to detect whether the printer is on or off BUT it will not print. The ThinClient says it is "processing" and some seconds after it says "online - idle" at the printer's status.
I have tried to print via a network printer we also have (a HP Color LaserJet CM6040 MFP) and it works perfectly. The p1005 do just fine on a Windows computer.
I hope anyone can help me out. Thanks.
Best regards,
Lewinzki

I hope you are having a great day and welcome to the forum
Your printer HP Laserjet p1005 is a commercial product. I suggest posting in the forum for HP Business Support for a better chance at finding a prompt solution.
By the way you may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of luck finding the assistance you need;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

I need to connect my wireless printer (HP LaserJet CP1025nw color) to the internet.

I need to connect my wireless printer (HP LaserJet CP1025nw color) to the internet. I recently have changed my name and password of my modem. Since the change I have lost connectivity between my computer and my printer. What do I need to do to regain connectivity? I am using Windows 7.
Trydell

I think you mean your password on your router right? Changed your SSID and/or password?
Try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Unable to print to a network printer, HP LaserJet 4000n

After much frustrating going in circles, I finally installed the software for my network printer, an HP LaserJet 4000n, otherwise idetified on my 4 other PCs as HP LaserJet 4000 PCL 6. It works well on the others, including an HP Netbook with Windows 7 Starter.
I finally got the printer to show up as HP Universal Printing PCL 6. I can set the Properties from my wife's new HP G72-B60US, running Windows 7 Home Premium (64 Bit). I can click on "Print Test Page," and I get the message that it was sent to the printer. However, it doesn't print. I get an "Error - Printing" message. I tried using the Windows assistant, but couldn't get any results.

Downloaded Microsoft_Fixit Mats_Run.printing.exe from: http//download.microsoft.com
Microsoft Automated Troubleshooting Services Setup
Checking network printer connectivity
Printer HP Universal Printing PCL6 cannot be contacted over the network
Reinstalled printer as HP LaserJet 4000 PCL 6. Printer HP LaserJet 4000 PCL6 cannot be contacted over the network
Contact your network administrator
Windows could no fix the problem. Please contact your network administrator.
Tied: http://support.microsoft.com/kb/980871 Workaround:
To work around this issue, you can click to clear the Render print jobs on client computers check box on the Sharing tab of the Printer Properties dialog box for the printer.
I posted on a Microsoft forum, and received a reply from an MS tech. Tried all his suggestions to no avail. My printer is attached to a desktop PC running Windows XP Professional. Do I need to install some kind of Windows 7 driver on the server?

Photo Printing on laserjet

Similar Messages

Maybe you are looking for