Photo printing with HP Laserjet CM1415

Hi,
I am trying to print photos of 10x15 cm with this printer. In the manual, I find that you should position the 10x15 photopaper in the following way:
"Printing side up, with the top edge at the back of the tray"
But for some reason, it doesn't seem to print properly... Is this printer able to print borderless photographs?
Tnx!

Hi ydwolf,
Here is a link to your manual.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Similar Messages

AutoCAD 2009 crashes when printing with HP Laserjet CP1525nw via wireless connection

Printing to CP1525nw via wireless connection crashes AutoCAD 2009 on a WIndows 7 Home OS + Sony VAIO VPCL21M1E
Works fine printing from any other application.

I'm facing the same problem but, i'm AutoCAD 2012 and it crashes when printing with HP Laserjet CP1525n via USB or network cable

Can not print with HP LaserJet 6L since the upgrade to Mavericks.

Can not print with HP LaserJet 6L since the upgrade to Mavericks. Any alternative driver for this printer?

I have an HP LaserJet 5P and had the same problem. My LaserJet is connected to a D-Link ethernet print server, then to an Airport Express to support wireless printing.
As recommended in earlier posts, I first downloaded the Gutenprint HP drivers at Sourceforge, version 5.2.9 That did not work. Then found the reference to the Apple kb here: http://support.apple.com/kb/dl907
Downloaded these drivers. When setting up the printer, I got the autoselect option for Generic Postscript Printer and used that. Printer worked, but printed out garbage. I then deleted the printer, and this time selected the HP LaserJet 5P CUPS + Gutenprint v.5.2.9 THAT WORKED! I don't know if was the combination of downloading the drivers from Sourceforge and the Apple kb, or just the Apple kb that solved the problem, but I'm glad this is now sorted.
I was a bit surprised when I hit this snag to begin with because the last upgrade I did from Lion to Mountain Lion, I did not have this issue. It was seamless.

Printing with HP Laserjet 5L

Cannot print more than 1 time with HP Laserjet 5L unless I reboot machine (which is very inconvenient). Additional print job(s) will queue up but will take forever to spool and eventually after about 30 minutes it quits trying.
I know printer is old - but it works fine (on my old PC...)
Using printer cable (not USB port).
Print driver being used is HP Laserjet 5L - Gutenprinting 5.2.3
It appears on the HP site that there isn't a driver for this for mac's.
Just installed Snow Leopard (but same problem existed in 10.5)... was hoping the update might miraculously fix - haha.
Any suggestions?? Thanks VERY MUCH in advance for any and all help.

There is no Apple Macintosh Computer with a Parallel Printer Port.
So you either use a USB-to-Centronics-parallel-printer-cable or you don't actually have an Apple computer.
If you use the adapter cable it would help to know which one (vendor, name of the cable).
My father is using such cable to connect the Laserjet 6L (almost identical to your 5L) with his iMac 20" 2,66 1066 running Snow Leopard 10.6.2
Try deleting the printer from the systems settings printer page. Restart the computer. Re-install the printer connected to the IEEE 1284-port (the cable should be autodetected by MacOS).
Try sending small amount of pages. The printers memory is very limited and MacOS send highdef printing data ...

Networking printer with HP Laserjet and Linksys wired print server

I have an older Laserjet 4 Plus that is networked via a Linksys 3-port wired print server.
My Windows-based PCs print to it fine but I can't print with my iMac. It gets there but gets an error at the printer and never prints.
I'm new to the Mac world as of 6/16 so am still learning.
Thanks for the help.

Paul, I am amazed you were ever able to print via the Linksys wireless server on your mac. I have the identical router and print server, and only the Windows PC's on my wireless network have been able to share the printer on that wireless server. I've been unable to find a driver for my iMac, and could never get the iMac to find the server. Finally gave up and bought an HP 2600n color laser and connected it directly to the iMac via USB. You're right about lack of help from Linksys. There is an Apple folder under "unsupported" on the print server installation CD, but there's nothing helpful in there.
iMac (Intel) Mac OS X (10.4.5)
iMac (Intel) Mac OS X (10.4.5)

Can not Print with HP LaserJet 5000 and Epson AcuLaser C9100

I am using MacBook Pro 2.3 GHz Intel Core i7 with Mac OS X (10.6.6)
I already install the latest print driver from the Apple Software Update website.
The driver for HP is Ver. 17.5 & for Epson is Ver. 5.2
I connect two of the printer to my Belkin Surf N300 wireless N Router with ethernet cable.
The error when print to HP LaserJet 5000 is as follow:-
Unable to get printer status (Not Implemented)!
Network host 'x.x.x.x' is busy; will retry in 30 seconds...
This error can stay forever if I do not delete the print job
The error when print to Epson AcuLaser C9100 is as follow:-
Printer not responding
This error can stay forever if I do not delete the print job
Previously I can print with my emac with OS X 10.4.10, but now I can not print with 2 of my printer.
My 2 printer are in good condition, so this is not the printer problem.
Please, do anyone know how to fix this problem fast, because I need to use this two printer for my business.
Thanks in advance.

That is not what Greg needs to know. That is just the way that the IP addresses are assigned to the printers.
Your problem is probably that the printers were probably originally found by AppleTalk. AppleTalk is not included in Snow Leopard. If the printers support Bonjour, they should be found that way. Otherwise, you have to use other methods.
How did you add your printers on the new computer? If you delete them from Print & Fax, how would you add them again?

Unable to print from a Mac using Maverick 10.9.2 on an Epson Photo printer with Photoshop CS4. Can you help?

I am trying to print in Photoshop CS4 on an Epson Photo printer (3880) from my Mac. I just upgraded to Maverick 10.9.2 when the problem started. Can you help.

I have the answer. It took quite a while but I know why the 3880 won't print from Photoshop 4 with Maverick. It is due to the Epson .icc page description files. The way to solve the problem is to make your own .icc. OK, so you don't know how to do it. This is what I did so now I get the quality prints I expect from an expensive printer.
You need to go to www.datacolor.com/spyderprint and purchase the Spyderprint hardware and software. It comes as a package for $300 to $350 depending on if you get a sale. The software will print on the 3880 test sheets of color blocks. With the hardware reader you then read the colors on the test sheets printed. What this does is match the monitor image with the printer, ink and paper you used. It makes an .icc page description file for you to select instead of the Epson .icc file. When you print again select the new .icc file and also choose "Printer Manages Colors" instead of "Photoshop Manages Colors" I know this is usual but it works. When you are done you will be smiling too with your beautiful results.
One other thing. If you want, it is optional, also purchase the Spider 4 Pro for $150. It calibrates your monitor and helps make excellent prints.
I understand it is more money and you already probably have a good computer, expensive camera to go with the 3880 so spend the extra money so it all works together.
I hope this helps.

Poor quality Photo printing with the HP Officejet 6600

Is anyone having a problem with the HP Officejet 6600 having very poor quality photo prints?

Hi HereInJersey,
Welcome to the HP Support forums. I understand that printed photos from your Officejet 6600 don't have the quality that you expect.
I have included the "Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems" troubleshooting document. It has detailed steps to take to improve the quality of your print jobs.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

PHOTO PRINTING WITH C5280

I know this is a really stupid,stupid question but I have never used the Vivera photo ink with my printer. I want to print some pictures of my grandchildren and do not want them to fade. However I do not know which cartridges to use. Do I use HP 99 Photo with HP 74 Black or do I use HP 99 Photo with HP 100 Gray. I have not been able to find any instructions as to this matter. Could someone please educate this dumb gramma?
Mahalo,
Ke'ala

My answer in this thread may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Print with HP laserjet CP 1025 color and Mac Lion 10.7.3

I have an HP laserjet CP1025 color and I am trying to print with Mac Book Pro 10.7.3. I updated the printer firmware to LJCP1020_FWupdate and also update my laptop with HPPrintersDrivers2.8
Still I dont know how to print. The printer doesnot appear anywhere. Is it possible to print or do I need to change the printer?, which is the next step?

Well berti, depending on your needs and what you are trying to accompish, take a look at this article:
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=38123&tmp_task=useCategory&cc=us&dlc...
This has information that should be able to solve most wireless and network inquiries.
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

Photo Printing With iPhoto

iPhoto is a good program but it is practically useless for printing on small photo paper. I use "Film Factory OS X" which I think came with my Epson R300 printer.
David

Hi David,
I use Easy Photo-Print which came with my Canon Printer. I actually think the software that comes with the Printers are easier and pretty good because they were made for the Printer.
Lori

Driver Polaroid P310 (Lexmark) Photo Printer with Pictbridge?

What a deal! We got a free photo printer. Prints great 4x6 from the camera (Panasonic Lumix TZ-3) via Pictbridge and the camera's USB cable. Is there any hope of printing from iPhoto?
First it would need a USB-USB cable. Our Epson printer cable and the camera cable and all the other cables are different on both ends so they don't work. Do they even make that kind of cables?
Then it needs a driver. Does Tiger or iPhoto speak Pictbridge?
Otherwise now we know why they can't give them away fast enough. Both Lexmark and Polaroid have no mention of this printer online but Ritz Camera, amazon.com, and Wal-Mart sure are advertising them with no mention of it being a camera-only printer. Would have cost a lot extra to put two plugs on the printer one for the computer and one for the printer?
The "thermal ink jet" seems to print fine but I'm leaving a test photo in the sun to see what happens.
The printer does have a nice handle that pops up from the top kinda like a lunch box [or boat anchor.]

Have you downloaded and installed the latest drivers from here:
http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_X665 0&segment=SUPPORT&userlocale=EN_UK&frompage=null#2

Problems printing with HP laserjet 1018

I'm using the hplip package. CUPS sees the printer, but I can't print diddley. I followed the wiki word for word and have googled extensively but I can't seem to figure it out. I tried printing as root, and as my user, and I am in the lp group but to no avail.
All that happens when I try to print is it says the jobs are all pending. Occasionally I get the error
"/usr/lib/cups/filter/foomatic-rip-hplip failed"
I also tried the foo2zjs with similar results. But with the foo2zjs driver it simply says all my jobs are complete, rather than pending.
I've also tried the hp-toolbox program that comes with hplip, it can get the printer to move!, but it still won't print anything.
Thanks for the help.
Last edited by jayjay44 (2009-11-04 18:14:24)

Read wiki, please. It would be helpful http://wiki.archlinux.org/index.php/Cups
Maybe this is solution
A HPLIP printer sends "/usr/lib/cups/backend/hp failed" error
Make sure dbus is installed and running, e.g. check DAEMONS in /etc/rc.conf or run ls /var/run/daemons.
hp-toolbox sends an error, "Unable to communicate with device"
If running hp-toolbox as a regular user results in:
# hp-toolbox
# error: Unable to communicate with device (code=12): hp:/usb/<your printer id>
or, "Unable to communicate with device"", then you may have to add yourself to the lp group by running the following command:
# gpasswd -a <username> lp
CUPS returns '"foomatic-rip" not available/stopped with status 3' with a HP printer
If you receive any of the following error messages in /var/log/cups/error_log while using a HP printer, with jobs appearing to be processed while they all end up not being completed with their status set to 'stopped':
Filter "foomatic-rip" for printer "<printer_name>" not available: No such file or director
or:
PID 5771 (/usr/lib/cups/filter/foomatic-rip) stopped with status 3!
make sure you have hplip installed, in addition to the packages mentioned above, net-snmp is also needed. See: http://bbs.archlinux.org/viewtopic.php?id=65615
# pacman -S hplip
Last edited by vennen (2009-11-10 22:08:18)

Do let me know how to connect cloud print with hp laserjet 1320n

sir kindly do letme know the procedure ....to print with hp laserjet1320n. in cloud print..without physical connection..

Hi Ajmir,
This specific model dont support ePrint Feature.
Kind Regards,
Oliver
"Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.

Printing with HP laserjet P1009

When printing with HP laserjer P1009 a message appears saying PrintJobMgr (158) and PrintJob close unexpectedly and there is no way to print, I eliminate the printer and add new printer, reload the driver and same think happen, could you help on that, thank you

DoctorFresh wrote:
Nope - still not sure which driver you refer to.
The P1008 does not appear on my list when I try and reinstall the printer.
Running the latest version of OS
sorry if i can't help you.
i´m working with the last OS (10.6.5) with a macbook pro and an imac. it works for me in both.
the driver is "P1008 1.3.0.261". maybe it's on your dvd, but i'don´t know.

Photo printing with HP Laserjet CM1415

Similar Messages

Maybe you are looking for