Photo's sent via email not being received with attachment file

I have a question regarding emailing photos (jpg) files. Though I am able to send the JPG files, when the person receives them they only see the picture but do not have the ability to download the attachment as none is visible. I have tried various methods but none have helped me. Also, can iPhoto import RAW ?

when the person receives them they only see the picture but do not have the ability to download the attachment as none is visible.
If they can see the picture then they have got the file. It's a setting on their end to figure out how to download it.
Also, can iPhoto import RAW ?
Er, yes but... RAW is a generic term for these files but every camera produces a different form of RAW file, so it's a question of what formats are supported on v6 of iPhoto (a few) on 10.3 (very few).
Regards
TD

Similar Messages

  • Random email not being received

    Have been running into a strange issue with my iCloud email address the past week or so.  Some email that is being sent to me is not arriving.  Here is what I've been looking at.
    Missing email is not being filtered to another folder.
    Missing email is not in my junk mail folder
    A single sender can deliver many emails, only some of which arrive.  Have tried this with several other non-iCloud email addresses which I own and verified that not all email is being received.
    Senders of the email which never arrive do not receive any automated delivery failure noticies.
    the account still has a me.com address - but it has been migrated to iCloud.
    Really ***** because I've only just completed a migration away from gmail.  If I can't rely on iCloud to receive email I'm going to have to go through the hassle of getting another address and notifying everyone.
    Anyone have any thoughts? 

    I have exactly the same problem, and (for me at least) it is server-side. Sean, a senior adviser for iCloud support, has been looking into it since 8th May but no luck so far. Some emails come through but others don't: of the 19 emails sent from [email protected] to discuss the issue, for instance, only 4 have come through to my mac.com iCloud account. The remainder have only gone to my backup account. I think this might be the same problem this user is having:
    https://discussions.apple.com/message/18288701#18288701
    but I've not had a response to my response to him/her. Would you mind if I passed this thread on to the person looking at the problem for me please? I've relied on my account for years, and I'm REALLY reluctant to abandon it now. Perhaps if this is affecting other accounts it can be fixed by finding out what they have in common.
    All best wishes
    Alex

  • Sent mail is not being received

    Some of my emails use my me.com account are not being received by the recipient.
    The emails show being SENT in my SENT box.

    I have a similar but perhaps unrelated problem. Every now and then, I send an email on my gmail account using Mail. The sent mail appears in my sent box, but never arrives, and does not appear in my webmail sent box (where it usually does, using gmail). Most of the time it works, and it even works most of the time with people it has had a problem with, including mail I send to myself at work at my professional address. Usually arrives...but not always. I don't know how to trust my sent mail box without always going on the webmail to make sure it actually went out. I only have this problem when using the Mail application, but there are no other common characteristics (attachements, ISPs, etc) to say there could be a problem with one of those things. Anyone else have this problem?
    Susannah

  • TS3276 Email not being received?

    Not all incoming emails are being received on iPad.
    Do you know how to resolve please?

    The iPad has no filter system of its own. Spam filtering would have been done either by your mail service provider or by whatever mail reading software you are running on your desktop PC.
    You didn't answer some of my questions:
    What kind(s) of accounts(s)? (POP3? IMAP? Exchange?)
    Are they perhaps being read and disposed of on some other device [like the PC]?
    New questions:
    What mail reading software do you use on the desktop PC?
    Do you use any mail rules on the desktop PC?
    Have you been able to characterize what sorts of email are likely to get to your PC and not your iPad? (For example: Is it sender-related? Content-related? Time-of-day-related? More likely on replies than originals?)

  • Only Incoming emails not being received on Mac Mail

    Hello,
    I am able to receive incoming emails on my Blackberry as well as my Webmail, but since a couple of days, my incoming Emails are just not being received on my Mac Mail, specific to 1 Account only.  I have multiple accounts on my Mac Mail.
    Please assist.

    Hello Shadab333
    Start with using Connection Doctor to see if there is anything that is preventing it from receiving email. Depending on the settings of that email address in Mail you may not receive them once they have been checked elsewhere. Check out the article below to troubleshoot the issue further.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Regards,
    -Norm G.

  • Sent emails not being received

    Hi, urgent help required.  I currently run 4 different email addresses via BT, 2 for me and 2 for my partner.  Since Thursday we have noticed that some emails are going missing.  I've tested out all addresses by sending from one to another and some are delivered okay others appear to be sent but never arrive, and some appear in our Spam folders.  My partner also sent me emails to my work address but only 2 out of 3 arrived.  I use Windows Mail, my partner uses Outlook Express, I tested via webmail and through our Blackberrys but the results are always different, there is no set pattern, but one thing is for sure, not all emails arrive.  I know email is not 100% perfect, and the odd one goes missing but never to this extent.
    I even had a problem getting verified for this forum because the confirmation emails kept going into Spam on webmail.
    The main worry is because my partner is self employed and uses his email constantly we are worried that important emails are now going missing, this can be the difference of getting a job from a client or not.
    I've checked out some postings are read about disconnecting and rebooting the Hub, which I've done, to no avail.
    Please help, as I'm no technical genius but my partner is worse and looks to me to solve these things, and this one has got me baffled.

    SPAM filters are heuristic, which means they learn. If you find that some of your messages are appeaing in SPAM folders and ypu don't tell the mail reader that this is not where they should be it starts to assume that ALL messages sent from that user should end up in SPAM. Depending on which mail program you use there may be a button to tell it that specific messages are not SPAM, it is important that you use this on any messages which are erroneously misplaced. They may also support a preferred senders list which is checked before making the decision where to put an incoming email. Unfortunately each mail reader is different in this respect, so it's hard to give specific instructions.

  • Email not being received/sent

    Having some trouble with email on the ipad - Some of the emails that are sent on the ipad are never received.  Some emails that are sent to the Ipad, bounce. 
    I have telus email - not sure what other information you would need. Ipad2 wifi edition
    Thanks for any help/advice. 

    when the person receives them they only see the picture but do not have the ability to download the attachment as none is visible.
    If they can see the picture then they have got the file. It's a setting on their end to figure out how to download it.
    Also, can iPhoto import RAW ?
    Er, yes but... RAW is a generic term for these files but every camera produces a different form of RAW file, so it's a question of what formats are supported on v6 of iPhoto (a few) on 10.3 (very few).
    Regards
    TD

  • Alert Rule Emails not being received

    Emails are not received from [email protected] to email hosted
    by network solutions even if the domain name is added to to the white list. Network solutions support tells us that emails are being blocked/sent from originating server itself.

    Hi,
    From azure status the alert servers are working fine, I have tested on my side, and received alert email, so I don't think this issue is related to azure side, if you still confuse
    with this, please try to connect with azure support, here is the channel:
    http://www.windowsazure.com/en-us/support/contact/
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Internal emails not being received.

    Hi,
    We have come across an issue in our office with our blackberrys. If we send emails from our Blackberrys to another internal email address it arrives on our computers in our outlook but not on the blackberry. It doesn't fail or not sent it goes as if its sent but never arrives on the Blackberry.
    If we send from our Computers to the address it arrives on both the Computer and the Blackberry.
    Our carrier is vodafone ireland... and we have also spoken to our hosting company..
    Can anyone help with this... it is as if Blackberry have blocked our company emails!

    Yes, that helps ... and this only occurs when you send email FROM your BlackBerrys to other internal (meaning on your same company or corporate email domain name) email addresses.
    First, check your internal email server's spam folders for those addresses and make sure the mail is not being filtered as spam.
    Then, here are a couple of guides and suggestions
    KB11036Firewall and connection requirements for the BlackBerry Internet Service
    KB12447Error when sending email messages in same domain: authentication error: 530 5.1.0 unknown address
    KB21775How to allow enterprise activation traffic for a BlackBerry Enterprise Server to make it through a spam filter
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Where do photo messages sent via email go?

    When I send a photo message via email on my iPhone, is a copy of the sent message saved anywhere? I don't see it in the Sent folder for my .Mac IMAP account, nor in the Sent folders of any of the other IMAP accounts on the phone.

    A successfully sent message should be in the account's Sent mailbox.
    Which Sent mailbox do you have selected for storing messages sent by your .Mac account - a server stored mailbox or locally on the iPhone?
    Go to Settings > Mail. Select your .Mac account and then Advanced. Under Mailbox Behaviors, select Sent Mailbox. Which is selected - Sent under On My iPhone or a chosen server stored mailbox?

  • HT5361 Problems with @mac email NOT being received by others

    Recently people that I have been sending email to and they are in my address book have NOT been receiving a new email from my @mac.com account.  The emails are in my Sent folder and show they have been sent.  If someone sends me an email and I reply everyone sees it.  But not a new email.  Any thoughts on what I can do to find the problem? 
    I've cleaned up my email, rebuilt my inboxes.  Please help!!  I use my @mac for all my business! 
    Oh - this happens no matter where I send the email from - iphone 5 or Ipad or macbook pro.
    Thank you,
    K

    Hi,
    Part of the final question will depend on how you got to have the various email IDs
    If you had an .Mac account and therefore the @mac.com email and then Linked this to @me.com in MobileMe then people can send to either and it will turn up in your mail box.
    The same is true if you then linked the MobileMe @me.com to the iCloud account which moved the @me.com address to iCloud and may have latter given you the @iCloud.com.
    In this case people could send to any of the three IDs and they will be received in your In box.
    You should be able to login to iCloud (the web page) with any of the IDs (they all use the same password) and view the mail from there.
    There should not really be any problem sending from one type of account compared to another.
    I am not aware of any filtering either by Apple on older @mac.com IDs or Google not accepting them.
    In the Window Menu of Mail there is the Connection Doctor which may give further clues.
    9:20 pm      Tuesday; January 7, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Approval Email not being received

    Hi All,
    We just upgrade to R12 and the approval email is not getting received by approvers. This used to work on 11i. On R12, the notification is in the Worklist in Oracle but the email is not getting sent. Did we forgot to run a workflow job or I miss a set-up. Can you help me please.
    Thanks

    Are the enrollments auto-approving or just getting stuck somewhere along the way?
    If it is getting hung somewhere and it's never approving the enrollment, you should check to see that your Workflow Background Process is running regularly.
    If it's auto-approving, you should look up the function OTA_LEARNER_HOME_SS from either System Administrator or Functional Administrator and check to see that your approval mode set to YD. You should check that "pApprovalMode=YD" and "pCertApprovalMode=YD"

  • Email alias emails not being received

    I haven't been able to receive any emails for the past 3 days at any of my icloud email address. This morning, I just started receiving some at one of my email addresses. They aren't being received on icloud.com or in my Mail program. I'm missing a lot of important emails and I'm hoping someone knows what's going on or what to do. This has never happened before in the last 12 years. What's going on???

    Ok all servers where enabled, i think by me leaving out the server field it was returning nothing, i put one of our CAS servers in there and then they showed results.  Appears now that 5 out of the 6 users shows a message delivered to them but the
    6th is missing still?  I'm of course assuming our organization would recieve one message from this outside address, capture that email and distribute it to all the different mailboxes in our organization that are To'd or CC'd on it.  It appears that
    it is recieving a seperate email for each recipient and delivering them one at a time to each mailbox?  Each mailbox that got the message so far shows a Timestamp for the eventid Recieved 1 hour after each other, seems like once the message is recieved
    it should be delivered all at the same time no?  still curious why the other mailbox still hasnt recieved anything..
    Michael Duhon

  • Email not being received

    I have sent several emails concerning work and none have yet to be delivered. i am on a trial membership for .mac.com. how do go about seeing if those emails were delivered or why are these emails not going through. i need a solution to this problem asap due to the fact it does effect my work.

    Do you have a good wifi or cellular data connection?  Have you contact your email provider, since you've done all the trouble shooting steps already.

  • Bapi_document_create2 does not work correctly with attached file.

    Hi all.
    I hava a problem with bapi. I programmed below.
            ls_docdata-documenttype = 'BBS'.
            ls_docdata-description  = 'JJW test'.
            ls_file-documenttype = 'BBS'.
            ls_file-ORIGINALTYPE = 1.
            ls_file-storagecategory = 'ZSTW_KPRO'.
            ls_file-wsapplication = 'TXT'.
            ls_file-docfile = entity_filename.
            append ls_file to lt_files.
            CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
              EXPORTING
                documentdata       = ls_docdata
                PF_FTP_DEST = 'SAPFTP'
                PF_HTTP_DEST = 'SAPHTTP'
              IMPORTING
                documenttype               =      lv_documenttype
                documentnumber           =     lv_documentnumber
                documentpart                =     lv_documentpart
                documentversion           =     lv_documentversion
                return                           =     ls_return
              tables
                documentfiles     = lt_files.
            call function 'BAPI_TRANSACTION_COMMIT'.
    If I don't attach the file, DIR is created but if attach some files, it does not work. What should I do??
    regards.

    Hi,
    You can use the below to attach the file from BSP to SAP. But it doesnt use the BAPI - 'BAPI_DOCUMENT_CREATE2'. It works perfectly for me. Let me know if you have any questions.
    Note: This code put the file into SAP Directory "/userapps/master_data/" as well as it upload the file into Transaction WTY since i am using Business object:BUS2222. You may need to modify the Business object if you ahve the one, otherwise you can just put it into SAP DIR.
    FUNCTION ZATTACH_CREATE.
    *"*"Update function module:
    *"*"Local interface:
    *"  IMPORTING
    *"     VALUE(FILE) TYPE  SAPB-SAPFILES
    *"     VALUE(STR_FILE_CONTENT) TYPE  XSTRING
    *"     VALUE(OBJECT_KEY) TYPE  BAPIBDS01-OBJKEY
      DATA: LOGICAL_SYSTEM TYPE BAPIBDS01-LOG_SYSTEM,
            CLASSNAME TYPE  BAPIBDS01-CLASSNAME,
            CLASSTYPE TYPE  BAPIBDS01-CLASSTYPE.
      DATA:  IT_FILES TYPE TABLE OF  BAPIFILES,
            IT_SIGNATURE TYPE TABLE OF  BAPISIGNAT,
       FILES TYPE  BAPIFILES,
      SIGNATURE TYPE   BAPISIGNAT.
      DATA: I_TOADD TYPE TOADD,
            FILENAME_ALL TYPE SAPB-SAPFILES,
            FILE_PATH TYPE SAPB-SAPFILES,
            FILE_PATH_MEMORY(250) TYPE C,  " path für SAP memory
            FILE_PATH_LENGTH TYPE I,       " length of the file_path
           FILE_CONTENT_LENGTH TYPE I,       " length of the file_CONTENT
           FILE_NAME TYPE SAPB-SAPFILES,
            FILE_EXTENSION TYPE TOADD-DOC_TYPE.     " file-extension.
      DATA: I_FILE_CONTENT TYPE TABLE OF BAPICONTEN.
      DATA: WA_FILE_CONTENT TYPE  BAPICONTEN,
       STRING_CONTENT TYPE STRING,
       STRING_CONTENT1 TYPE STRING.
      DATA:
       I_FILES TYPE TABLE OF BAPIFILES ,
            I_SIGNATURE TYPE TABLE OF BAPISIGNAT ,
            I_COMPONENTS TYPE TABLE OF BAPICOMPON ,
           COMPONENTS TYPE BAPICOMPON ,
            I_PROPERTIES TYPE TABLE OF SDOKPROPTY ,
            I_PROPERTIES2 TYPE TABLE OF BAPIPROPER ,
            I_PROPERTIES_DEL TYPE TABLE OF BAPIDPROPT ,
           MIMETYPE TYPE TOADD-MIMETYPE,
      COMPID TYPE BAPICOMPON-COMP_ID,  " compid for popup
            COMPID_FLAG(1) TYPE C,           " compid can't be changed
            MODIFY_FLAG(1) TYPE C,           " document is modified
            ATTRI_FLAG(1) TYPE C,            " attri can't be changed
            TITLE_FLAG(1) TYPE C,            " titel of the popup
            CANCEL_FLAG(1) TYPE C,           " cancel button Yes/No
            BUTTON_TEXT(10) TYPE C,
            INFO_TEXT(100) TYPE C,
      VERSION_NR TYPE BDN_CON-DOC_VER_NO,     " version_nr for popup
            VERSION_LANGU2 TYPE T002T-SPTXT, " language field in POPUP
            VERSION_LANGU TYPE BDN_CON-LANGU," SPRAS language field
            TITLE_TEXT(100) TYPE C,          " title of the popup
            DESCRIPTION TYPE BDN_CON-DESCRIPT.      " descr. for popup
    *FILENAME_ALL = fileUpload_event->file_name.
    * Transfering into SAP File server.
      FILE_CONTENT_LENGTH = XSTRLEN( STR_FILE_CONTENT ).
      FILENAME_ALL = FILE .
      STRING_CONTENT = STR_FILE_CONTENT.
      DATA: OUT_LINES TYPE TABLE OF XSTRING.
      CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
        EXPORTING
          BUFFER                = STR_FILE_CONTENT
    *   APPEND_TO_TABLE       = ' '
    * IMPORTING
    *   OUTPUT_LENGTH         =
        TABLES
          BINARY_TAB            = I_FILE_CONTENT.
      DELETE DATASET '/userapps/master_data/claim1.txt'.
      OPEN DATASET '/userapps/master_data/claim1.txt' FOR APPENDING
        IN TEXT MODE ENCODING DEFAULT.
    *  LOOP AT I_FILE_CONTENT INTO WA_FILE_CONTENT.
    *    TRANSFER STR_FILE_CONTENT TO '/userapps/master_data/claim1.txt'.
      TRANSFER STRING_CONTENT TO '/userapps/master_data/claim1.txt'.
    *  ENDLOOP.
      CLOSE DATASET '/userapps/master_data/claim1.txt'.
      OPEN DATASET '/userapps/master_data/claim1.txt' FOR INPUT
           IN TEXT MODE ENCODING DEFAULT.
      READ DATASET '/userapps/master_data/claim1.txt'  into STRING_CONTENT1.
    * -- split filename                                                 -- *
        DATA: LENGTH TYPE I.
      DATA: PATH2(1200).  " LIKE sapb-sapfiles.
      DATA: L_FILE(1200),
            L_DIR(1200),
            L_DELIMITER        TYPE C,
            L_OFFSET           TYPE I,
            L_BYTES            TYPE I,
            L_DELIMITER_OFFSET TYPE I,
            L_DELIMITER_BYTES  TYPE I,
            L_CHAR             TYPE C,
            L_PREVIOUS_CHAR    TYPE C,
            L_LAST_CHAR        TYPE C.
      PATH2 = FILENAME_ALL.
      LENGTH = STRLEN( PATH2 ).
      L_OFFSET = 0.
      WHILE L_OFFSET < LENGTH.
        L_LAST_CHAR = L_CHAR. "remember last character
        L_BYTES = CHARLEN( PATH2+L_OFFSET ).
        L_CHAR = PATH2+L_OFFSET(L_BYTES). "get current character
        IF L_CHAR = '/' OR L_CHAR = '' OR L_CHAR = ':'.
          IF L_DELIMITER IS INITIAL OR L_DELIMITER = ':'.
            "Typically we deal with absolute paths, so the first
            "delimiter is best. This allows for UNIX paths with
            "'' in the directory or file name
            L_DELIMITER = L_CHAR.
          ENDIF.
          IF L_CHAR = L_DELIMITER.
            L_DELIMITER_OFFSET = L_OFFSET.
            L_DELIMITER_BYTES = L_BYTES.
            "remember character in front of delimiter:
            L_PREVIOUS_CHAR = L_LAST_CHAR.
          ENDIF.
        ENDIF.
        L_OFFSET = L_OFFSET + L_BYTES.
      ENDWHILE.
      IF NOT L_DELIMITER IS INITIAL.
        L_OFFSET = L_DELIMITER_OFFSET + L_DELIMITER_BYTES.
        L_FILE = PATH2+L_OFFSET.
        IF L_PREVIOUS_CHAR = ':' OR L_DELIMITER = ':'.
          "path ends with or after drive identifer, include the delimiter
          L_DIR = PATH2(L_OFFSET).
        ELSEIF NOT L_DELIMITER_OFFSET IS INITIAL.
          "do not include a trailing delimiter for compatibility reasons
          L_DIR = PATH2(L_DELIMITER_OFFSET).
        ELSE.
          CLEAR L_DIR.
        ENDIF.
      ELSE.
        L_DIR = SPACE.
        L_FILE = PATH2.
      ENDIF.
      FILE_PATH = L_DIR.
      FILE_NAME = L_FILE.
    * -- set new file_path to SAP memory                                -- *
      FILE_PATH_LENGTH = STRLEN( FILE_PATH ).
      IF FILE_PATH <> SPACE AND FILE_PATH_LENGTH < 250.
        FILE_PATH_MEMORY = FILE_PATH.
        SET PARAMETER ID 'OAP' FIELD FILE_PATH_MEMORY.
      ELSE.
        FILE_PATH_MEMORY = SPACE.
        SET PARAMETER ID 'OAP' FIELD FILE_PATH_MEMORY.
      ENDIF.
    * -- data declaration ------------------------------------------------ *
      DATA:
            SINGLE_C TYPE C.
      CLEAR: SINGLE_C.
      LENGTH = STRLEN( FILE_NAME ).
      IF LENGTH > 0.
        WHILE LENGTH > 0.
          SINGLE_C = FILE_NAME+LENGTH(1).
          IF SINGLE_C CO '.'.
            LENGTH = LENGTH + 1.
            EXIT.
          ELSE.
            LENGTH = LENGTH - 1.
          ENDIF.
        ENDWHILE.
        IF LENGTH > 0.
          FILE_EXTENSION = FILE_NAME+LENGTH.
        ELSE.
          FILE_EXTENSION = SPACE.
        ENDIF.
      ELSE.
        FILE_EXTENSION = SPACE.
      ENDIF.
      IF FILE_EXTENSION <> SPACE.
        SET LOCALE LANGUAGE SY-LANGU.
        TRANSLATE FILE_EXTENSION TO UPPER CASE.              "#EC TRANSLANG
        SET LOCALE LANGUAGE SPACE.
      ENDIF.
    * TR001++
      DATA: I_TOADV TYPE TABLE OF TOADV.
      DATA: WA_TOADV TYPE TOADV.
      DATA: OBJECT TYPE SAEOBJART.
      SELECT * FROM TOADV INTO CORRESPONDING FIELDS OF TABLE
              I_TOADV WHERE STANDARD = 'X'.
      DELETE I_TOADV WHERE AR_OBJECT CS 'BDS' OR AR_OBJECT CS 'ZSEST'.
      READ TABLE I_TOADV INTO WA_TOADV WITH KEY DOC_TYPE = FILE_EXTENSION.
    * -- get name and description for the document                      -- *
      CLEAR: COMPID,
             DESCRIPTION,
             VERSION_NR,
             MODIFY_FLAG,
             COMPID_FLAG,
             ATTRI_FLAG,
             TITLE_FLAG.
      COMPID_FLAG    = ' '.              " -> compid can't be changed
      MODIFY_FLAG    = 'S'.              " -> popup in save modus
      ATTRI_FLAG     = 'X'.              " -> attri's can be changed
      COMPID         = FILE_NAME.
      VERSION_NR     = '00000001'.
      VERSION_LANGU2 = SY-LANGU.
      TITLE_FLAG     = '1'.              " -> BDN
    * -- get the mimetype of the docuclass                              -- *
    *PERFORM MIMETYPE_GET(OAALL) USING FILE_EXTENSION
    *                            CHANGING I_TOADD.
      DATA: I_DOCUMENTCLASS TYPE TOADD-DOC_TYPE.
      MOVE FILE_EXTENSION TO I_DOCUMENTCLASS.
      SET LOCALE LANGUAGE SY-LANGU.
      TRANSLATE I_DOCUMENTCLASS TO UPPER CASE.               "#EC TRANSLANG
      SET LOCALE LANGUAGE SPACE.
      SELECT SINGLE * FROM TOADD INTO I_TOADD WHERE
                                 DOC_TYPE EQ I_DOCUMENTCLASS.
      IF SY-SUBRC NE 0.                    " nothing found -> default!
        I_TOADD-DOC_TYPE = I_DOCUMENTCLASS.
        I_TOADD-MIMETYPE = 'application/x-docType'.             "#EC NOTEXT
      ENDIF.
      MOVE I_TOADD-MIMETYPE TO MIMETYPE.
    * -- fill file and signature structure                              -- *
      CLEAR: I_FILES, I_SIGNATURE.
      REFRESH : I_FILES, I_SIGNATURE.
      DESCRIPTION = FILE_NAME.
      FILES-DOC_COUNT = 1.
      FILES-DIRECTORY = FILE_PATH.
      FILES-FILENAME  = FILE_NAME.
      FILES-MIMETYPE  = MIMETYPE.
      APPEND FILES TO I_FILES.
    * -- fill components and signature structure                        -- *
      COMPONENTS-DOC_COUNT  = 1.
      COMPONENTS-COMP_COUNT = 1.
      COMPONENTS-MIMETYPE   = MIMETYPE.
      COMPONENTS-COMP_ID         = FILE_NAME.
      APPEND COMPONENTS TO I_COMPONENTS.
      SIGNATURE-DOC_COUNT  = 1.
      SIGNATURE-PROP_NAME  = 'BDS_DOCUMENTCLASS'.
      SIGNATURE-PROP_VALUE = FILE_EXTENSION.
      APPEND SIGNATURE TO I_SIGNATURE.
      SIGNATURE-PROP_NAME = 'BDS_CONTREP'.
    *IF BDS_DOCTYPE_LIST-CONTREP = SPACE.
      SIGNATURE-PROP_VALUE = ' '.                               "#EC NOTEXT
    *ELSE.
    *  I_SIGNATURE-PROP_VALUE = BDS_DOCTYPE_LIST-CONTREP.
    *ENDIF.
      APPEND SIGNATURE TO I_SIGNATURE.
      SIGNATURE-PROP_NAME  = 'BDS_DOCUMENTTYPE'.
      SIGNATURE-PROP_VALUE = WA_TOADV-AR_OBJECT. "'ZSRVCXLS'."TR001+
      APPEND SIGNATURE TO I_SIGNATURE.
      SIGNATURE-PROP_NAME  = 'DESCRIPTION'.
      SIGNATURE-PROP_VALUE = DESCRIPTION.
      APPEND SIGNATURE TO I_SIGNATURE.
      SIGNATURE-PROP_NAME  = 'LANGUAGE'.
      SIGNATURE-PROP_VALUE = VERSION_LANGU.
      APPEND SIGNATURE TO I_SIGNATURE.
      CALL FUNCTION 'BDS_BUSINESSDOCUMENT_CREA_TAB'
        EXPORTING
    *   LOGICAL_SYSTEM        =
          CLASSNAME             = 'BUS2222' "classname_select
          CLASSTYPE             = 'BO'" classtype_select
        CLIENT                = SY-MANDT
          OBJECT_KEY            = OBJECT_KEY
        BINARY_FLAG           = 'X'
    * IMPORTING
    *   OBJECT_KEY            =
        TABLES
          SIGNATURE             = I_SIGNATURE
          COMPONENTS            = I_COMPONENTS
        CONTENT               = I_FILE_CONTENT
    *   ASCII_CONTENT         =
    * EXCEPTIONS
    *   NOTHING_FOUND         = 1
    *   PARAMETER_ERROR       = 2
    *   NOT_ALLOWED           = 3
    *   ERROR_KPRO            = 4
    *   INTERNAL_ERROR        = 5
    *   NOT_AUTHORIZED        = 6
    *   OTHERS                = 7
      COMMIT WORK AND WAIT.
      IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFUNCTION.
    Message was edited by:
            Raja T

Maybe you are looking for