Photo's w/Ken Burns Problem

Hi,
I have a G4 powermac and I'm using imovie 6. I am doing a slideshow with around 130 pictures using the Ken Burns Effect on most of them. The problem I encounter is with the last set of pictures I put in (around 30 of them), they look good but when I burn it in iDVD 6 only those last 30 picture's quality is TERRIBLE!! Even with the pictures that don't have the KB's effect. They are blurry, and the ones that have the KB's effect looks like there are lines going thru the top half of the picture. Any help on how to correct this would be great! My headache continues to grow by the minute trying to figure this out!!!!
Russ

Hello Russell,
it seems that you have encountered the bug described by Karl Petersen in this thread:
http://discussions.apple.com/thread.jspa?messageID=2105598&#2105598
hope this helps
mish

Similar Messages

  • I have an older version of imovie.  After I change the photos using the Ken Burns effect and save them, the next time I open the file and click 'show photo settings' to change the zoom, the picture appears black and I can't change the zoom?

    I have a five year old version of imovie that generally works fine.  However, when I add a photo using the 'Ken Burns' effect then save the movie, the next time I open the file and click 'show photo settings' the picture appears black and I cannot change the zoom.  Any suggestions?

    Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
    Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
    See here:
    Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
    Let us know how that works for you.

  • "show photo settings" and ken burns glitch? please help :(

    hi, i'm having a problem,
    my software is the latest version, so is quicktime, all my updates are up to date, i'm not using an external hardrive.
    i was creating a music video composed of all still pictures and everything was going fine untill today.
    the "show photo settings" display box has a glitch or something.
    the slide bars for the ken burns effect have disappeared.
    a checkmark on the imovie display is now visible and the apply and reverse buttons have disappeared.
    i can no longer exit out the photo settings window the same way as before.
    when pictures are added to the timeline they are much too long.
    i'm unable to keep the ken burns affect box checked, it keeps unchecking itself and it wont allow me to change any photo settings on certain pictures and on the ones it will allow me to when i press "apply" or the checkmark it stalls and wont render the file (the red line doesn't fill and just stays there)
    when changing the length or display time of the picture it will delete itself and replace it with the next picture in line.
    can anyone help me? i've spent a massive amount of time on this video and would like to finish it. i dont know what the problem is. maybe i clicked something i shouldn't have?
    thanks in advance

    i'm estimating around _1000 pictures_ ... they are all being stored on the desktop ...
    WOW!
    ... how long does your poor Mac need for booting??
    The >40y old Xerox metaphor of a Desktop/Folders/trashbin had the concept of simulating reallife.. would you store ~1000 pics on your desk while glueing them into an album (ever glued 1k pics into an album?) ...?
    I assume, your System is 'cluttered'. totally cluttered.
    try to clean up ... in Finder, clean your File 'System'... create folders (many folders...), use the pre-installed structure your Mac came with (how about storing pictures in... ehm, Pictures?), why not using iLife as intended (import into iM from iPhoto), why not using the integrated 'File Management' of iPhoto to create albums, to give your mass of pics some structure, finally consider to use approbiate apps (if you try to create a stopmotion-like movie, QTpro or Boinx' istopmotion are better tools) ...
    keep in mind, a Mac needs at last 10-15GB free on internal drive to act normal.
    export as much as you can to external drives (firewire connected, 'MacOsExtended' formatted), don't forget to give these harddrives structure too .. you know how to create Folders in Finder?
    after all is set and done, your desktop is clean, everything is in its place, use Disk Utility to check&repair... finally, reboot your Mac, give it a chance to 'recreate' itself in better shape
    ... and there's still a high chance, that the fragile file management of the 20$ consumer app iMovie is still overwhelmed by >1000 stills in one single project...

  • Importing photo's & using ken burns

    I'm importing photo's into i movie OK.
    They are fine, and run as a movie in clip viewer until I add a Ken Burns effect. Then they go Black in the clip pane (disappear).
    They return to view only if I remove the ken burns affect.
    What's up with that?

    I found my problem, after numerous hours of frustration.
    the movie has to be saved into "movies" icon on main hard drive. Where all the effects, etc. are stored to go with the movie project. I was saving my project to an alternative file on my secondary hard drive.

  • Ken Burns  problem

    I am making a 'movie' of some pictures with the Ken Burns effects with iMovie 4. At first, I had no trouble. Now I find that frequently the effect is not applied or updated properly. The motion shows in the Photos preview, but when I look at the clip in the iMovie window to check it out, the start postion is held for most of the clip and then it jumps to the finish postion in the last frame or so.
    I have had the problem when using photos from an iPhoto album and imported photos.
    Sometimes, I can get good motion so this is not consistent. Any hints?
    I am using QuickTime 6.5.2.
    CAL

    I have 52 GB free on the boot disk.
    The movie is stored on a 2nd internal disk which has 196 GB free.
    What is so strange is that I sometime succeed and sometimes fail. I will have to take notes and see if there is a pattern.
    CAL

  • Audio Encoding & Ken Burns Problems Persist - More Help Please.

    My previous thread (10/27): Encoding Audio in iDVD for 41 hours. Is there any hope?
    --72min iMovie, many high res photos, iTunes music, voiceovers, sound effects (20.9G)
    Since then:
    I reimported Music Store songs from CD and tried iMovie to iDVD again , menu took 50min, video encoding took 4.5hrs, audio encoding went 12 hours till I force quit. (Should I have waited longer?)
    I then was able to create a Quicktime Movie (Full Quality) in 36hrs, but the Ken Burns photos were so horrific (shimmering) that I decided to try creating a Disk Image. Is there any chance the results will be better? (Burn w/Toast6)
    I also tried exporting iMovie to my JVC GR-DVP3 video camera. Only got colored checkerboard patterns.
    If the Disk Image approach doesn't work, I'll be back at square one. Anything else I might try?

    Wow, this sounds like a long time. Is this DV? Or
    H.264?
    The extension is .dv What is H.264
    Remember that iDVD will create standard resolution
    video, even if you are feeding it HD material. So
    use Export> Quicktime> Full Quality DV.
    I did.
    The shimmering might improve once it is burned to
    disk, but it might not. I also find it is different
    on different players. PhotoToMovie does a better job
    than iMovie/iPhoto of avoiding shimmers.
    I heard that, but it took me 2 weeks to make my movie and at present I can't bear the thought of redoing all my KB photos.
    I also tried exporting iMovie to my JVC GR-DVP3
    video camera. Only got colored checkerboard
    patterns
    Check the iMovie forum for this one, but it sure
    seems that something must not be hooked up right.
    Was it in VCR mode?
    I have a post on the iMovie forum, iMovie recognized the camera and it recorded, but all I got was sporadic patterns. The manual shows DV to DV operations but no computer to DV. Maybe my camera isn't compatable.

  • Ken Burn Problem in latest iMovie

    I've just updated iMovie with the Mavericks update. When I create a ken burn on a photo it plays back jerky and not smooth as per the previous version.  Any ideas?
    I'm on a 2013 mac mini.

    Hi Hélène
    Form iMovie's Menu, select "Edit > Select in iMovie > Photos". All photos in the project timeline will now be highlighted with a yellow border. Click on the Adjust button at the top right, just above the viewer. Now click on the Crop button that appears (along with other buttons/tools) below the Adjust button.
    From the Crop panel that appears, click on Fit. All photos in the timeline should now remain static, that is, with no Ken Burns panning or zooming evident.
    John

  • Ken Burns problems remain in 6.0.1

    I've been patiently waiting for an update to fix the problems with the Ken Burns effect that started with 6.0. In iMovie 5, I could import jpegs from iPhoto and apply KB effect without an issue. Starting in 6.0, I would either get something that looked like static on a TV set or just brief "flashes" of static as the image panned/zoomed. It's been frustrating as I have a half finished movie where the iMovie 5 content works great, but I cannot add to it. I even tried starting from scratch with a new project and still don't have any luck.
    I just installed 6.0.1 seeing that the Ken Burns rendering was a specific fix of the update. No luck. Anyone experiencing the same issue or found a way around it?

    Fair enough statement and these programs are probably very good at what
    they do. However, I'm not pumping out enough of these yet to require
    additional capabilities
    My sentiments exactly. Ken Burns normally works beautifully, so I'd want to eliminate the cause of this problem so I could use it. The problem may affect other iMovie features too, so I'd want to get to the bottom of it.
    The first thing I'd try is to play the "flashing" Ken Burns clip with your right/left arrow keys. If there's no flashing as frames are played one at a time, it's a cosmetic problem; the rendered clip is actually fine. (Quitting iMovie and re-opening the project may eliminate the cosmetic problem.)
    Next I'd create a new user to see if that user has the problem too. If the problem doesn't exist for the new user, then there's likely some kind of software conflict when I am the user. Most likely culprit: third-party QuickTime add-ons and third-party iMovie add-ons.
    Then run a good RAM test. Memtest is good, I hear. (It runs in Terminal, so it doesn't have a pretty face, but you double-click on it and everything else automatic. Give it time.)
    I haven't mentioned all the other maintenance routines that should accompany troubleshooting. Those are listed elsewhere in this forum by Lennart and others.
    Karl

  • Inserting Photos and the Ken Burns Effect

    First
    I have inserted a number of photos from iPhoto onto the timeline via the "Photos" panel in the "Media" section. After adding these pictures to the timeline, with transitions, etc. I realized that I wanted to add some pictures before the current ones in the timeline. How would I do this easily?
    Second
    These pictures are motionless, which is boring, and I want to add the Ken Burns Effect. However, I don't want the same effect on every picture is there some way to randomize the effect, similar to the way iPhoto does in its slideshows?
    Thanks!

    I have inserted a number of photos from iPhoto onto the timeline via the "Photos" panel in the "Media" section. After adding these pictures to the timeline, with transitions, etc. I realized that I wanted to add some pictures before the current ones in the timeline. How would I do this easily?
    Just select the photos (Command-click) you wish to import, and drag them directly from the photos panel down to the timeline at the point you want to insert them.
    is there some way to randomize the effect, similar to the way iPhoto does in its slideshows?
    Not in iMovie. You would have to vary them individually.
    However, you can use Photo-to-Movie to accomplish this. With this app, you drag in the photos and let the application create the effects. You can also individualize the effects yourself. Photo to Movie

  • Ken Burns effect causing photos to show static

    As the subject line suggests I am getting a sizzle effect, like sparkling pixel static across my photos when the Ken Burns zoom is in progress. It is uniform across the entirety of the photo. THis is in imovie hd 6.0.4 on my new imac 21.5 with system 10.6.4 These are photos taken with 12mp dsl camera and I notice some other older photos taken with 4mp camera point and shoot do not show this distraction. Something up with the rendering of high res stills ? THis does not happen in Ilife 09's imovie.
    Thanks for shedding any light on this anyone.

    I had the same problem with iMovie 9. I found a solution that worked for me at http://discussions.apple.com/thread.jspa?messageID=12544852&#12544852

  • Photos in Timeline and Ken Burns Effect (Motion Control)

    I'd like to check my processes for setting photos with the Ken Burns Effect. I've used Tom's Motion Control example to set Ken Burns Effect on two or more photos that are next to each other in the timeline. I have found that if the photos are approximately the same pixel size that it works well. When they are significantly different I still see the second pic holding still for a few frames and then the movement.
    So, I'm interested in other experiences. Did you also find that the relative size of the photos makes a difference? And, when you have photos that are significantly diff in size, what process do you use to bring them closer together?
    Thanks,
    dave

    Hi David,
    I think the problem you are having is similar to one that I was encountering while finishing a project a few weeks ago. I also was using photos of differing sizes, but the issue with the late start on the "Ken Burns Effect" on the second photo wasn't related to the differing photo sizes, but to the transition I used between the images.
    I found that when I applied Motion to a photo using keyframes, the motion looked fine on both images until I applied a cross dissolve in between images. I realized that the cross dissolve is looking for frames before the motion keyframe to blend with the previous photo. Since the frames before the keyframe are "generated" (I'm not sure if that's the correct word) from the first frame of the still (which has no motion) it generates 15 frames (for a 1 second cross dissolve) that are not moving. That makes it appear like it's stuck and then starts moving when the playhead hits the motion keyframe.
    My solution was to move the still photo clips (one at a time) up one video track, extend both ends 15 frames and set the motion keyframe at the "new" beginning of the clip and the "new" end and do my motion based on that new clip length. I then brought in both ends back to their original positions and dropped the clip back into its original spot and then applied the cross dissolve. Now the cross dissolve would have 15 frames with motion to work with for blending the two pictures.
    It was incredibly tedious, but I had to do it because the images made up a large part of the video project I was working on. If anyone can suggest a better way of doing it, I would greatly appreciate it.
    Despite the time involved, I was really happy with the final results.
    I hope that helps.
    I don't log in here very often, so if you have any questions, feel free to email me at cgonzalezat*sfchronicle*dotcom
    Good luck.

  • Exporting still photos with Ken Burns from iMovie to Keynote

    I am new to the Mac and have no experience of iMovie. I am putting together a slide lecture that uses photos and graphics to promote a coffee-table book on conservation issues. The presentation will use manual advance and will be shown to public audiences on large screens. The quality of the projected image is very important so I will be using a high quality Canon projector with a resolution of 1400x1050.
    Some images are of landscapes and I want to use the Ken Burns effect that is available in iPhoto and iMovie but, for some unknown reason, not in Keynote. I posted this first with the Keynote Discussion Forum and was advised to move the photos from iPhoto to iMovie, apply the Ken Burns effect in iMovie, and then export to Keynote via Quicktime. My question is, if I do this, will my Ken Burns landscapes retain the same size and quality of projected image as the rest of my Keynote presentation? My impression is that using this process I may lose quality, but I hope I'm wrong. Please advise.

    Some background: Importing photos with the Ken Burns checkbox ON causes iMovie to render a video clip from the photo. That's an entirely different process than importing the photo as a "still" image. Unfortunately, Ken Burns and several other rendering routines are vulnerable to factors that sometimes cause them to fail. The disk format can cause failure, third-party software, inadequate video cards and the like. The factors often have nothing to do with iMovie itself.
    The same problems can occur when rendering other kinds of clips too, such as themes and special effects. (Ken Burn gets the bad rep because it's where the problems usually occur for users.)
    Some of the items you listed in your Library/QuickTime folder are third-party products. There may be others too in the other folders mentioned in the link I posted earlier, so be sure to look in those too. And in iMovie plug-in folders.
    Sometimes necessary items are missing that should exist. One I've seen mentioned here occasionally is the QuartzComposer.component, which should reside in your System/Library/QuickTime folder. If it's not there that might cause the problems you see.
    Installing/reinstalling the QuickTime 7.1.6 might help. I've seen reports of problems going away after that update. Repeating the update won't hurt.
    Have you tried creating a new user account and running iMovie as that user? If iMovie runs okay as that user that suggests a software conflict when you are the user. Unfortunately, if the software is installed in places where it applies to all users it will cause problems for the new user too.
    I'd keep trying to find some software component causing trouble for QuickTime/iMovie. It's clear some third-party components have been installed; there might be others. Perhaps stuff related to AVI?
    Karl

  • IMovie Crashing when importing photo with Ken Burns Effect

    iMovie is crashing all the time when I am trying to import a photo with Ken burns effect using media browser and hitting "apply". Is this a known problem ? If I dont apply Ken Buruns effect then it imports it fine.
    I am trying to put Photo at the begining of my project ( and then put title on that photo). If I have any clip in the begining and then try importing photo with ken burn's effect then it is not crashing, but it still does not import it. I click "apply" and it does soemthing , I can see the clip in timeline for a sec and then it disappears. So either way, cant use any photos anywhere with Ken Burn's effect. Whats going on?
    I have more than enough space available on my HDD and I do not think there is any conflicting QT plugins I have ( It's all default Install). This is so consistent that it seems like a Bug but can't find this exact case mentioned anywhere in discussions.
    Powerbook G4 12.1" 1.5Ghz   Mac OS X (10.4.5)  

    Welcome to the forum! And thanks for such an insightful post.
    I have two guesses here:
    o The Ken Burns code of iMovie has a problem with partitions
    o The Ken Burns code of iMovie has a problem with access rights
    I've never seen a Ken Burns problem with partitions (I've used multiple partitions for years with no problems). I suspect that's not the cause.
    But I think you've hit the nail on the head that iMovie may have a problem with permissions/access rights. I don't know exactly what the problem is — or whether it's caused by iMovie or OSX — but there is behavior that suggests something isn't right.
    I suspect the issue, whatever it is, causes a failure to save the rendered Ken Burns clip inside the project package. The red bar runs, but the rendered clip isn't saved to disk. My guess is OSX refuses to allow iMovie to save the file for OSX doesn't believe YOU have permission.
    One would think that using the Finder to set the permissions of the project package would solve the problem, but it doesn't seem to.
    There are two possible solutions:
    1. Set the partition to ignore permissions. In the Finder, click on the partition and Get Info. Turn ON the checkbox "Ignore permissions on this volume";
    2. Use Disk Utility to reformat (erase) the partition. Somehow that seems to fix the problem.
    Here's some history which may suggest another solution: In an earlier version of iMovie a similar problem occurred, where iMovie would refuse to open a project. It had somehow decided you didn't have permission to edit the project.
    The only solution was to use the Finder to create a new set of project folders — a folder and all the folders it normally contains — then Option-drag the FILES of the original project folder to the appropriate folders. (Option-dragging COPIED the files instead of moving them.) The new project folder would now open normally.
    If you are adept at working with packages, you might try creating your own package (which contains all the normal folders) then Option-drag the files of the problem project to your package.
    Once I saw an error -52 announcement, but it was not reproducible.
    Error -52 is a "Get file position error", which (may) suggest a disk directory error. That may be a disk issue unrelated to iMovie. You might want to consider using Disk Utility to Verify/Repair that partition.
    I have a separate partition for the movies and made a
    link from my home account to the directory with the
    movies on that partition. iMovie works correctly
    except for the Ken Burns photo rendering.
    I'm never sure whether creating such a link is a good idea or not, especially for the iLife apps. Some apps don't resolve the alias as they should, which creates other problems. A "Movies" alias sends iDVD a million miles beyond Jupiter, for example, where the iDVD project joins the space dust.
    For iMovie projects saved on partitions and external drives, I just save them inside a "iMovie 6 Projects" folder on that drive. (Every new version of iMovie gets a new folder.) For convenience, I may create aliases to help navigate there, but do nothing else. Everything just works.
    If you figure out something new, please say.
    Karl

  • How do I remove Ken Burns effect from individual photos?

    The instructions say to " In the Photo Settings window, deselect the Ken Burns effect checkbox and then click apply". My interface shows the word "update" instead of "apply" which has worked when I change other settings such as the length of time a photo is displayed. However every time I deselect KB...it comes back! I have also tried to constantly save the project, trying to save the deselect process.
    Has anyone an idea? BTW the KB effect is very poor for most vertical pictures as it will cut off the top of the photo.
    powerbook G4 Mac OS X (10.4.9) iMovie 6.0.3 version

    • Yes, the Photo Settings window says Update instead
    of Apply because you are updating an existing clip,
    not importing a new one.
    However every time I deselect KB...it comes back!
    • Not sure exactly what you mean there. Do you mean
    that in spite of unchecking the Ken Burns checkbox
    the Updated clip doesn't change? It still has the Ken
    Burns effect?
    YES - see solution I found below.
    If so, it sounds like iMovie may be failing to save
    the updated clip to disk. That can occur if the
    project resides on an external disk that uses the
    wrong disk format. iMovie requires the Mac OS
    Extended disk format. To check yours, see this:
    http://discussions.apple.com/message.jspa?messageID=41
    76921#4176921
    I had our office software person check this out.
    BTW the KB effect is very poor for most vertical
    pictures as it will cut off the top of the photo.
    • The Ken Burns effect can't read our minds. It only
    does what we tell it to do. For photos that have a
    portrait orientation it's normal to adjust the
    zoom/pan so the rendered clip stays within the photo.
    Note that it's possible to drag the photo in the
    Preview window to adjust both the Start and End
    points. So for a tall photo you may want to zoom/pan
    up-or-down instead of side-to-side.
    Note too that the settings in the Photo Settings
    window always accept those settings of the last photo
    we imported, updated or clip clicked on. So once
    you've imported a tall photo with the Ken Burns
    settings you like, you can easily apply those
    settings for another photo. Just click on that
    previously-rendered tall clip in the Timeline before
    importing your next tall photo.
    Karl
    Karl,
    Thank your for your input and in the last couple of days I have been able to produce the iMovie. But I now have another question about burning it.
    Let me point out that I was able to deal with the Ken Burns issues by deleting the photos I wanted to change and replacing with new photos and using your tips + the help menu on "adding motion to your photos" to zooming right / left / vertically (which was very helpful).
    Now that I have my project I cannot burn it as I get the following:there is not enough space to encode the aspects and in the pull down: "iDVD needs 2.350 GB of disk space to encode the remaining assets, but only 1.231 GB are available" I tried to cut down the files by deleting 5 chapters thus reducing the menu to one page showing chapters. I also re-saved the project with a new name.
    BTW - I did burn it once but needed to fix it as the opening menu didn't have sound and I saw some other small photo details I wanted to fix. This version had 11 chapters on 2 menu pages with photos in the background. Essentially all I did was add a few more photos in motion and add the sound. That is why I thought maybe it was too much and removed the chapters saving one remaining page with music. I also do not have it on wide screen format as that uses more memory.
    Can you help me with this? I don't understand why I'm getting the same message no matter what I do.
    Many thanks,
    Rozy

  • Trying to add a pause after Ken Burns effect to hold the photo

    I am trying to set a pause to my still photos after using the Ken Burns effect.  So it starts zoomed in on an area of the photo and pulls out and then I want it to hold for a few seconds so you can see the full photo.   Any suggestions?  I can't find anything anywhere???

    1) copy the photo with the Ken Burns effect
    2) place the copy after the original photo
    3) edit the copy, reverse the order of the Ken Burns effect using the arrows next to the word "Start" so the end point is now the start point, change "Ken Burns" effect to "Crop", and change the duration of the copy
    If you want the pause at the beginning
    - place the copy before the original photo
    - edit the copy by just changing the "Ken Burns" effect to a "Crop"  (i.e., crop using the start point),and change the duration of the copy
    If you have a "pause, ken burns effect, pause" don't use a transition after the 1st pause and before the 2nd pause. 
    With a group picture, you can simulate a real Ken Burns effect with
    transition, pause, zoom in, pause, [pan, pause] ... [pan, pause,] zoom out, pause, transition

Maybe you are looking for