Photo Smart 6510e ALL IN ONE SERIES. Only prints one page.

photosmart 6510 with windows 7. Had problems so reinstalled and now only prints one page even when set to print all

Hello bluebell21,
Welcome to the HP Support Forums!
I understand that you are having a printing issue with the Photosmart 6510 since you have re-installed the printer software.
I would first suggest to run the Print and Scan Dr. This look into drivers, software and communication problems that could have caused this. Let me know the out come, what passes, fails, is fixed, etc.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

Deskjet 3050 All-In-One J610 only prints blank pages

Hi,
All of a sudden, my printer stopped printing. The ink levels in the cartridges look fine in the HP utlity, and I did the self-cleaning steps, but when I print something, only a blank page comes out. There is some ink around the edge of the paper, though, but nothing on the actual page.
Any idea how I can fix this?
Thanks.

Hello jennydel,
Welcome to the HP Support Forums!
Cleaning the printheads is a great way to resolve print quality issues on the Deskjet 3050. On the cleaning page, does anything print on it?
In this HP document: Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems you will see the full HP suggested troubleshooting steps. I hope they are able to help get the printer working again.
Thanks for posting.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page, but not all or pages 1-5. Can this be overcome?

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5. I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?

You can use printPages(1, 5), however I need to know how you print current page.

My hp 100 mobile printer will only print one page then quits. will not print all of the pages.

my hp 100 mobile printer will only print one page then quits. will not print all of the pages. i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.

Hello colt1,
Are you using Bluetooth or USB cable to connect to the printer? Did you install from the disc, or from the online program? When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.?
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I have an all in one with wifi. It will only print one or one and a half pages

My printer will only print one or one and a half pages at a time.

Hi , Welcome to the HP Forums! I noticed that your HP Envy 4500 printer will only print one or one and a half pages, on Windows 8.1. I am happy to look into this printing issue for you! Some questions for you: What happens when you try print multiple copies? Copying Documents.Do you see any error messages on the front panel of the printer when it stops printing? Does the paper get stuck inside the printer? What happens if you print from NotePad?
In the meantime, please try the HP Print and Scan Doctor, and let me know what happens! Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

Can only print one item at a time

Hey everyone,
Bit of a Photoshop novice here, use it for DVD covers and labels. I have been using CS3 previously but upgraded to CS5.5 last year. The thing is on CS5.5 I can only print one page at a time even when I input say 20 copies to be printed, only one will print. That goes for the regular printer for printing covers and the disc printer.
I can open CS3 up and right away it will print however many I ask it to.
Is there something I am missing? Something so painfully obvious that it is staring me in the face but I am just not seeing it?
Thanks in advance!

It isn't a printer setting. I have 3 different printers connected to my system and all of them worked with CS3 fine. And when I delete the preferences folder for CS5.1 it works as it should but only once, then afterwards it only prints one copy, no matter how many I ask it to print!
So if it works when the preferences have been removed, then fails to work afterwards, how can that be a printer setting?
I have read elsewhere that others have had similar issues with CS5 and Windows 7.

Laserjet 2100 will only print one page at a time.

I recently acquired a second hand Laserjet 2100 Series. Installation was fine but it will only print one page at a time, I have to keep pressing the 'Go' button, which is very frustrating. The manual tells me that it is in 'Manual' mode but not how to change it. Can anyone help, please? O/S Windows 7. Thank you.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Appleworks will only print one page at a time, please help!

hi there ~
no matter how many times I ask the printer to print ALL pages, it will only print one at a time, so I have to manually print page 18, 17, etc....
Could this be because the pages are arranged left to right? that would seem strange.
also, I cannot find a function to re-arrange the pages. for example, i want to re-organize to make page 18 at the front as page 1. I just don't get it though I've searched the program.
THANKS SO MUCH!

Hi td,
Welcome to AppleDiscussions and the AppleWorks forum.
"no matter how many times I ask the printer to print ALL pages, it will only print one at a time, so I have to manually print page 18, 17, etc...."
My memory says the same as Yvan's.
If the printer dialogue has a checkbox labeled "Collate", make sure the box is checked, even if you are printing a single copy. If memory serves, this suggestion was made in connection with HP printers.
A second possible solution is to specify the page range when printing this document (or others that exhibit this problem). (eg. for a 25 page document specify printing From page 1 To page 25.) You might try specifying p. 1 to p. 99 for any document under 100 pages, although I don't know what effect this would have for a 5 page doc.
regards,
Barry

When I print from my pad it only print one page at a time, why?

Why can I only print one page at the time when using the iPad?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

Printer only printing one document at a time....

I have a Deskjet 990cxi and it is only printing one document at a time. I've tried changing the settings in the printer menu, and no matter what I do, it still only prints one copy of the document.
I've uninstalled and reinstalled the drivers, and everything.
Just so you know:
XP Service Pack 3
HP Deskjet 990cxi
Connected by USB
and---get this---there's NO ERROR MESSAGE.
Thanks in advance for all your help.

This is caused by the failure of one of your cartridges. Remove the black cartridge and print a test page. Does the printer print at normal speed? Is so the black cartridge was the issue and should be replaced. If not then put the black cartridge back in and remove the color cartridge and print test page. If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Designjet T520 will only print one page.

Hi, Brand new Windows 8 HP PC printing to a Designjet T520, will only print one page.I have met this problem on laserjets in the past and resolved it by enabling/disabling mopier mode.However none of the drivers I have tried (many) for the Designjet T520 have the option to turn on or off Mopier Mode. After many hours spent troubleshooting, I formatted and installed the Windows 8 machine again from scratch.Even with this brand new install on a bran new PC, I still cannot print multiple copies to the designjet. In the same office, 3 other Windows 8 machines are printing fine to the same plotter and can print mutliple copies. The driver versions are the same on all machines. Hope someone can help.Thanks.

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP DesignJet forum here, that is where the DesignJet experts can be found.

Acrobat 8.1.4 only prints 1 page when I select "all"

Hi all,
I'm hoping you can help me. Just spent 27 minutes on hold with Adobe tech support and gave up.
I have an iMac running OS 10.5.8 and had successfully used other versions of Acrobat. I bought a ScanSnap printer and it was bundled with Adobe Acrobat Pro 8.1.4. Installation seemed to go fine, but now when I try to print a multi-page document, it only prints one page, even when I check "all" on the print menu.
Also, when I try to click on print prevue, it says "Prevue is not supported." That's new, too.
So far I'm not thinking this is such a great bargain, even for free! Can you help?
Thanks,
Kathy

Print preview is not supported any longer. I think it is due to the fact that both use pdf technology and there may be a conflict.
As to why it only prints one page rather than all, that is a hard one. You could try deleting the printer driver and re-installing the driver to see if that helps.

Can only print ONE document then have to reset Airport Express to print aga

The title says it all.
Everything used to work fine until I installed Leopard. Now I can only print one document; subsequent documents will hang at 16% or 28%, etc.
Anyone else had this problem?
Thanks,
Mark

No, you are not the only person with the problem. I have tried it with both a "g" and an "n" Express (I bought the "n" hoping it might work better; nope). I have a Samsung CLP-510 plugged in to it. It prints one document, then I have to reset the Express before it will print again. When it tries to print the next document, it flashes "Unable to open device (read failure)!" briefly, then pauses the printer.
It's been driving me crazy since I installed Leopard, so I basically gave up on the Express as a print server as there seems to be no cure, and Apple seems to have no interest in fixing it. (I have been through several firmware updates since the problem started, and none have made any difference).
+Oddly, though, just now after the seventh reset, it accepted 6 of the documents in my queue (I had 22 in the queue, and I've just been waiting for it to pause, then resetting the router for each document) before it failed.+
Message was edited by: The Technomancer

I can only print one document LJ200 M276 and Dell Latitude e5430

I am using a HP Laser Jet 200 M276 All-in-One printer with my Dell latitude E5430 The problem is when I print a document the printer will work normally but if I try to print a second document it will not work at all. When I bring up the printer Queue it shows that the printer is still in the process of completing the first document (which has already been printed) and the second document is in the Queue waiting for the first to be completed. The only way to proceed with the printing is use task manager to close the application, shut down and reboot. Then again it only prints one document. I have installed the latest driver and updates and unplugged & replugged the printer and rebooted the computer.

The driver should be part of OS X, not something you download.
This link shows supported HP printers (6800 but no 6840).
http://support.apple.com/kb/HT3669#HP
I suggest you delete the printer, turn it off, restart your system, and turn the printer on and add it back in.
Barry

HP SimplePass - Only Prints One Webcard

Recently upgraded to HP SimplePass Ver 6.0.100.276 on my laptop using Windows 7 (service pack 1) Works fine except that when I try to print all my stored webcards, it only print one.
This question was solved.
View Solution.

Rich,
Welcome to the HP Forum.
It is not your printer, it is not your Operating System, it is the SimplePass software - this feature has not worked for about the last three versions. I suspect it never will do so again.
Someone on the forum (not one of our Experts) did make the claim that if you have Norton (some paid version) that you can print out the webcards in .csv format. I don't use Norton and cannot comment further. You could look into that if this is of interest.
Easy Workaround:
Snip an Image of the webcards in SimplePass,
save the Image as a .jpg,
throw the Image into Paint,
and add text.
Print that.
Consider storing the Image (and the paper copy) somewhere OTHER than on the C drive and in the drawer next to your computer.
Snipping Tool - Windows 7
Snipping Tool- Windows 8.x
Click the Kudos Thumbs-Up to say Thanks.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

Photo Smart 6510e ALL IN ONE SERIES. Only prints one page.

Similar Messages

Maybe you are looking for