Photo Smart Photo Scanner

I have a HP PhotoSmart Photo Scanner which when first installed ran on Windows 95.
Do you have an update to run this equipment on Windows XP
Item C5100A
[serial number removed for privacy]
Kind regards
B Thomson

XP driver is here
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=58823...
Here is your scanner main page, bookmark it for later reference.
http://h10025.www1.hp.com/ewfrf/wc/product?product=58823&lc=en&cc=us&dlc=en&task=&lang=en&cc=us

Similar Messages

My Epson Perfection V500 photo scanner stopped working when I upgraded to Yosemite. The only scanner available is my Epson All-in-One.

I installed the new Yosemite operating system even though I was afraid something bad would happen. Well. it did. I can no longer scan photos using my photo scanner. I have updated all the drivers and it is still not working. I have an Epson Perfection V500 photo scanner, as well as an Epson WorkForce 845 all-in-one scanner, printer, copier. The 845 is on the network. The V500 is connected to my computer. For some reason, I keep getting the error that my V500 is not connected and when I try to add it, my mac does not find it. I know it is there. It was working before I upgraded. Help

You may have already done so, but if not...
Try a different USB cable.
Reboot your computer
Launch Disk Utility (in the Utilities folder) and Repair Disk Permission
in the left pane, click once on the name of your hard disk
in the right pane, click on the First Aid tab near the top
under the blank window, click the button "Repair Disk Permissions."
Afterward, click the "verify disk" button and it will check your hard disk.
Now, try your scanner...

OS 10.4.4 + Photoshop Elements 2.0 + Epson Perfection 3200 Photo Scanner

i have an epson perfection 3200 photo scanner which had worked fine importing into photoshop elements 2.0 when i had an imac g3, but i cannot get it to work on my new machine, a powerbook g4 using 10.4.4. epson said it should work (i downloaded the most recent driver) but adobe said that 10.4.4 does not support photoshop elements 2.0 or 3.0. i downloaded 3.0 (they have a month trial) and it acknowledged my scanner for a second but then repeated the error message.
any thoughts?
thanks.
powerbook g4 Mac OS X (10.4.4)

i have an epson perfection 3200 photo scanner which had worked fine importing into photoshop elements 2.0 when i had an imac g3, but i cannot get it to work on my new machine, a powerbook g4 using 10.4.4. epson said it should work (i downloaded the most recent driver) but adobe said that 10.4.4 does not support photoshop elements 2.0 or 3.0. i downloaded 3.0 (they have a month trial) and it acknowledged my scanner for a second but then repeated the error message.
Further to Barbara's suggestions, have you tried uninstalling your scanner and then disconnecting it physically from your PB. Then reinstall the scanner software and any updated drivers with the scanner still disconnected. Then reconnect the USB to the scanner and see whether you have better success. Epson scanners can be fussy (shy?) about being recognised, and I used these steps when I "lost" my Epson 3170 when moving to 10.3.x.
Barbara is absolutely right about PS Elements 2 and 10.4.4 - I'm also using it regularly with no problems. Since you got it to work with your previous computer and OS, you can also get it to work with your new PB and 10.4.4 - it just may need a little coaxing...

HP SOLUTION CENTRE - MISSING for HP Scanjet 4890 Photo Scanner - after upgrade to Windows 7 or 8

Tearing my hair out after searching for months for solution - hope Someone Anyone can help. I love my HP Scanjet 4890 Photo Scanner and it is still working wonderfully 90% of the time - after a number of years.
However - when I upgraded to Windows 7 and Windows 8 (on other machine) - I had to download New Drivers for it. These did not come with the HP Solution Centre - which is where I was able to select "Transparencies or Slides".
I have Adobe Photoshop and can scan anything else - but not the Transparencies and Slides for which I bought the machine.
Is there a way of downloading the HP Solution Centre or accessing this feature?
Happy to hear any solutions
Thank You
KazVee

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How to access my Epson Perfection 2400 Photo scanner?

How can I access my Epson Perfection 2400 Photo scanner after upgrading from PS CS4 to CS6?
There is no Photoshop File/Export/Epson scanner listed anymore. I downloaded a TWAIN plug-in and loaded it in the PS Plug-in folder, but that did not help.
What should I be doing?
Mac OSX 10.6.8.

Moving this discussion to the Photoshop General Discussion forum.

I need a good photo scanner that will scan negs & slides, recommendations?

I am looking to find a good Photo scanner that will scan photos, slides and negatives. It has to be able to work with MacBook Pro running OS X Mountain Lion. does anyone have any recommendations? I am somewhat ameteur photographer, and have over 5000 photos, negatives and i have no idea how many slides that i want to be able to upload into computer. help, please....i am very new to Mac, just got 1st MacBook in November, so any help anyone can offer would be greatly appreciated. thanks,

Search this listing: http://www.silverfast.com/show/mountain-lion/en.html As well as this listing: http://www.hamrick.com/vuescan/vuescan.htm#supported

Best photo scanner/printers and camcorders for MacBooks using iPhoto and iMovie

I have been trying to scan slides, first to my husband's MacBook (running 10.6.8 - our older laptop) and also to my MacBook (running 10.8.2). Before upgrading to the newer OSs, I did this successfully a number of years ago. I have been using my Epson Photo Stylus RX600 with it's slide template, but it scans the slides as they look in the template, not as actual photos. I've tried searching for solutions and have read the manual carefully, but the screens I should be seeing on my MacBook are not coming up as they used to. I fear the scanner/printer is just not compatible with the OS systems beyond Tiger. If you have had similar problems, do you have a solution. If this really is an incompatibility issue, what photo scanner/printers would you recommend? I have over 5000 slides to digitalize. I am also wanting to get a camcorder with the following features: HD (1080i), 10 X zoom or greater, low light performance, manual exposure and focus controls, an articulating LCD screen, HDMI port, USB, and perhaps a built-in hd but SD memory too -- for under $1000. Any recommendations?

Epson does have updates for the RX600 to run under OS X 10.7, and possible OS X 10.8. To download, you need to attach the RX600 to your MacBook, turn it on, make sure the system sees it (print a page), then run Software Update.
If that doesn't work, and you need a new all-in-one, I've had good success with Canon products for many years. They have solid operating system drivers, and a good selection of models with individual ink tanks, so I can replace a color that's empty and not throw out a 3-in-1 ink tank when one color is out.
On the camcorder, you might want to ask the question in the iMovie or Final Cut discussions.

HT1338 I have OS X.9 and I cannot use my Epson Perfection 4490 Photo Scanner. There is no driver available on the Epson site. What can I do?

I have OS X.9 and I cannot use my Epson Perfection 4490 Photo Scanner. There is no driver available on the Epson site. What can I do?

Did you try the driver from this Epson page: Epson Perfection 4490 Photo, Drivers & Downloads - Technical Support - Epson America, Inc.
OT

Elements 13 does not recognise Epson Perfection 4990 photo scanner

I just installed Elements 13 (also have 11 and 12 installed). I have installed 13 as a 64 bit (windows 8), but cannot get it to recognize my Epson perfection 4990 photo scanner (or Perfect Effects 4, for that matter). Any ideas? I copied the PlugIN files from 12 to 13, but so far no dice.

See this Tech doc:
http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html

Install Epson Perfection 3200 Photo Scanner

My kernel is a custom built 2.6.3. I am trying to install an Epson Perfection 3200 Photo Scanner. It works under SuSE8.2 so there is no fundamental hardware problem. The sane website lists the 3200 as completely supported.
The system recognizes the scanner, as shown in part of cat /proc/bus/usb/devices:
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=04b8 ProdID=011c Rev= 1.02
S: Manufacturer=EPSON
S: Product=EPSON Scanner
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
The program sane-find-scanner produces:
found USB scanner (vendor=0x04b8, product=0x011c) at libusb:001:003
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
The program scanimage -L produces:
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
The problem appears to be that the system cannot find a driver. Is the driver suppose to come from sane and there is a configuration issue? Is the system suppose to find the driver as a module or compiled-in the kernel? Is there some wild and wonderful dev - devsfs issue?
Any intel (small i) would be most appreciated.
Rick

the generic usb scanner module is no longer in the kernel. any scanner that used it mus use libusb now. to do this first remove any entry you have in any module loading files that load that module.
next add either one of these lines to your fstab:
none /proc/bus/usb/ usbfs defaults 0 0
or
none /proc/bus/usb/ usbdevfs defaults 0 0
but going by your output so far you would seem to have one of these two lines in fstab.
anyway either one of those lines will give root only access to your scanner so you will need to give your user access to the device. your can do that in a few ways.
first you can create a group add your user to it then edit your usbfs line to read:
none /proc/bus/usb/ usbfs rw,mode=666,gid=<--newgroupnamehere--> 0 0
or if you have a single user you can edit the line to read:
none /proc/bus/usb/ usbfs defaults,mode=666 0 0
if this does not work read up on hotplug or add this line to you rc.local:
chown -R <yourusername>.users /proc/bus/usb/xxx/*
where the "xxx" represents the three digit number directory in /proc/bus/usb/ that represents your scanner. you can find this by running scanimage -L as root and it will give you two three digit numbers in the output. then look in the number directory/directories for those two numbers and that will be the directory you put in for the xxx.

HP Scanjet 4850 Photo Scanner driver for Mac OS9.x

I need the driver and other information to get my scanner to work.
Driver says that it has unknown author and will not install

Hi 44621,
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP Scanjet 4370 is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP Scanjet 4370 Photo Scanner supportpage helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Photoshop Elements 11 does not recognize Epson Perfection 4990 Photo Scanner from "File"/"Import"

I just upgraded from Photoshop Elements 6 to Elements 11 on a brand new iMac running OS X 10.8.2, but Elements 11 will not recognize my Epson Perfection 4990 PHOTO Scanner as an option to import from when I click on "File" then "Import." Is there a Plug-In that may be missing for this to operate as it used to in Elements 6 running on an older G5 Non-Intel processor? I don't have the new Elements 11 Disk to copy anything from, since I downloaded the program directly from Adobe.

See this Tech doc:
http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html

How to use CS4 to control my photo scanner?

How do I use CS4 to scan slides or pics using my new Epson photo scanner?

File>Import
You should see a TWAIN, WIA or Epson option to the right.
If that option isn't there, look into the software for your scanner. CS4 still used (or at least had available) TWAIN scanning capabilities, but in the 32 bit version only. You may need the TWAIN plugin for CS4. http://helpx.adobe.com/photoshop/kb/twain-plug-photoshop-cs4-cs5.html

ELEMENTS 11: I want to import files from my Epson 4490 Photo scanner and I can not use WIA feature.

I would like to import photos that I have scanned with my Epson 4490 photo scanner. I am scanning slides and it appears that I can not use the WAI feature that is offered in photoshop elements 11. I am able to import using photoshop elements 2. Has the functionality been lost in the newer version?

Try installing the TWAIN plug-in - http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Does anyone know of a good A3 photo scanner compatable with OS 10.8 mountain lion? I need it to scan watercolour artwork. I was interested in Microtek scanmaker 9800XL and also Epson Expression 10000 but neither are compatible. Thanks :-)

Does anyone know of a good A3 photo scanner compatable with OS 10.8 mountain lion? I need it to scan watercolour artwork. I was interested in Microtek scanmaker 9800XL and also Epson Expression 10000 but neither are compatible. Thanks :-)

Daniel Craigie-
How full is the hard drive that you are trying to save to? Not that it should matter, but have you tried scanning another document?
Is the scanner plugged directly into the Mac? Try it that way.
Disconnect all peripherals except keyboard, monitor, mouse and scanner and see if the problem goes away.
Luck-
-DaddyPaycheck

Photo Smart Photo Scanner

Similar Messages

Maybe you are looking for