Photo synching issue

When I am synching my iPhone through iTunes. I always get the same error message that reads:
"Itunes cannot sync photos to the iPhone because the folder "Pictures" cannot be found."
I am not sure resolving this issue or where this pictures folder can be found.

If you don't use iPhoto for importing photos from a digital camera including from your iPhone's Camera Roll and for photo storage/management on your Mac - you manually store photos, what is selected under the Photos tab for your iPhone sync preferences with iTunes?

Similar Messages

HT4236 itouch photo synching issue

How can I synch photos from my computer to itouch and have them appear in order (by flle name: 1,2,3 etc.) as they appear on my computer? My itouch is changing the order and showing them by orde of the date the photo file was made. I want to see my synched photos in the order I want, not by file date.

What version of iOS do you have on the iPod ? On iOS 5 (from here) :
it sorts photos in ascending order by the Date Modified when viewing all your photos together in the Photo Library (or Photos tab for iPad). When viewing a photo album, the photos are sorted alphanumerically by the photo file names.
On iOS 4 :
iOS 4 sorts photos by the Date Taken tag of the photos. Specifically, your device uses the pictures' EXIF tags to determine the Date Taken information. Your device will look for the following EXIF tags within your pictures:
Capture Date
Date Time Digitized
Date Time Original
Last Modified
To change the sort order, you must change the Date Taken of photos on your computer. Third-party photo-management software may be able to do this.

Photo synch Problem

Hello there!
I' ve got a problem with photo synch via iTunes. Everytime I try to synch the photos( doesnt matter if try it with 1000 or just 10 photos), iTunes stopps at the first photo and tells me after a few minutes, that the synchronisation has been aborted. Everything works with iTunes, except the photo-synch. I tried to delete iPod cache, delete iTunes and so on. Same problem with iPad 3! iOS is 6.0 on the iPhone 4s and 5.1. on the iPad3.
Can anybody help me, please?
Best regards,
Schröder
P.S.: please excuse my english!

And wouldn't you know it, minutes after I posted the question, I stumbled across my own answer, though I don't fully understand why it worked. Just for the heck of it, I checked "include videos" when synching iPhoto. This time, I got an error message from iTunes that some of my iPhoto videos were not supported by my iPhone 5. Then I turned video synching back off, then re-synched, and the remaining photos synched! Were I to speculate, the videos were somehow corrupting the iPod Photo Cache (even though I had never turned it on), causing all subsequent photos not to synch. At any rate, it's fixed, and perhaps someone else with the same issue has a hint on how to proceed. Thanks for reading!

AutoImporter iPhone Photo Duplicate issue

I took a look in my iphone photo synch folder today and noticed that for some of the photos, there were dozens of duplicates (i.e. file 1.jpg, but had duplicates 1 1.jpg, 1 2.jpg, etc.).
This isn't happening to all of the photos, only some. I deleted all of the contents of the synch folder, rebooted and resynched, but same scenario. Each time I connect the iphone, it creates additional duplicate copies of some of these photos.
I looked at the photos in Image Capture and there are no duplicates listed there.
Any suggestions? Is next step to try and delete everything from Image Capture or something? The images that get duplicated view OK, so doesn't seem to be corrupted or anything.

I just discovered AutoImporter and ran into exactly same issue. I'm afraid, there's nothing that can be done about it, it's just Apple way of making software: take brilliant idea and deliberately ruin its implementation with a small detail. AutoImporter is just another useless piece of software in OS X bundle, designed to make life easier but doing otherwise.
Nevertheless, I'd be glad to be wrong and to hear someone's solution on how to avoid duplicates or another way to download previously unsynced photos from iphone/ipad upon connection.

I purchased 2 books for my iPad and they downloaded successfully. They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac. Is this a synch issue? When I click the Synch box I am warned that downloads on my iPad will be

i purchased 2 books for my iPad and they downloaded successfully. They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac. Is this a synch issue? When I click the Synch box I am warned that downloads on my iPad will be erased. Is that true? My ultimate goad is to be able to read the books on my iPhone as well. Thanks.

You should be able to copy them to your computer's iTunes via File > Transfer Purchases and you can then sync them to the iPhone (or you could re-download them directly on the iPhone)

Synching Issues with iphone 4/ itunes

When attempting to synch my iphone with itunes, the synch cannot progress past the "backing up" stage. Why?? Getting a bit frustrated now to be honest.
Every time I plug my phone into the computer, itunes informs me of the latest update required (4.3.5), but because of the synching issue, I obviously can't get the new update.
any help appreciated

"iTunes could not back up the iPhone "Guru's iPhone" because the backup was corrupt or not compatible with the iPhone. Delete the backup for this iPhone, then try again."
The above is the error message I receive when trying to upgrade/ synch my iPhone with iTunes on my Laptop. I have the latest version of iTunes available (10.4.1)

Photo viewer issue in N8

when i opened the photo viewer to view photos, it takes more time to load (the loading symbol is rotating for more than minute).This was not the actual opening time before.If i try to exit the viewer, i couldn't,the display is switched off for a while,then i pressed menu key to minimise the application and closed it.
Also i locked the screen using the slider key.but i couldn't unlock the screen using slider key.
does anyone experience the same issue?
Solved!
Go to Solution.

For all those having that "black screen" problem, here's an excerpt from the PR 1.1 changelog:
Images and Camera
* 4053 Confusing behaviour when saving to a file that matches an existing directory
* 6194 Shutter release button does not always work
* 6372 Sometimes photos are not deleted if you delete directly after taking them
* 7060 Sometimes photos are very green
* 7160 Camera app hardcodes and requires FAT partition
* 7394 Some photos are missing EXIF DateTimeOriginal data
* 7758 Daily image counter in photo filenames not incrementing in some cases
* 8087 Photo autorotation issue
* 8310 Image Viewer shows only black screen
* 8698 camera does not have the night mode function
* 8877 Volume buttons should work in camera window when lens cover is not opened
So try PR 1.1.

Photo synch not working

Lately, can't say if it's been after the last iPod Classic firmware or the last iTunes version, the photo synching is not working properly.
After the first photo synch, everything seems fine but when I connect the iPod to the Mac (or the windows), all the photos are synched again so I have duplicated full resolution photos using twice the disk space.
I've noticed that the disk capacity colour bar has no yellow zone when I reconnect the iPod. It's like iPod or iTunes think that space are just files.
Thanks.

Seems that later upgrades (iPhoto, iTunes, Leopard) fixed that.

Audio synch issues in QT

My project displays fine in PE8. No audio synch issues in the preview. After outputting the project to a quicktime movie withe LAN setting the audio becomes seems to run faster than the video, becoming more and more out of synch as the movie plays. Any ideas what might cause such an issue?

The Stream info in MPEG streamclip for files from both cameras gives me this info:
Bitrate: 30.31 Mpbs
Video Tracks:
DV/DVCPRO - NTSC, 720x480, 16:9, 29.9699999999999 fps, 28.77 Mbps
Audio Tracks:
16-Bit Little Endian mono, 48 khz, 768 kbps
I don't know if this helps.

Photo Stream issue. Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone. How can this be?

Photo Stream issue. Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone. How can this be? Tried shut down on all devices, reboot and the results are the same.

Photo Stream issue. Photo Stream shows 263 photos when viewed on the iMac, 289 when viewed on the iPad and 327 when viewed on the iPhone. How can this be? Tried shut down on all devices, reboot and the results are the same.

CS5 HDR pro two photos alignment issue

Although I really enjoy the new tool, I'm having trouble aligning two photograph when I open then through the HDR pro tool.
Why is alignment of two photos so bad in HDR pro and perfect if you align the two same photos as two layers? I've even tried reopening the same files over and over and get different results each time in HDR pro.
In view of this, shouldn't there be a realign button in the slider adjustment screen, or options for alignment, such as Use the regular auto-align?
Since alignment works fine with layers, is it possible to have an option to use layers as a starting point for HDR pro instead of opening saved photos only? I realize this probably might not give perfect results as just fixing the automatic alignment issue...
But hey, I'm just trying to find a workflow around this if I didn't have my tripod with me at time of shoot... and I shot only two photos to composite.

Hi Chris,
thanks for looking into this matter. Where do you want me to send the files (over 50 megs zipped).. they're CR2 files...
Date: Fri, 28 May 2010 14:38:51 -0600
From: [email protected]
To: [email protected]
Subject: CS5 HDR pro two photos alignment issue
Don't know what could be going wrong. Can we get the files so we can try to reproduce the problem here at Adobe?
>

How do I delete the last photos synched from my iMac to my iPad?

How do I delete the last photos synched from my iMac to my iPad from the iPad? They have taken up all of my storage.

Synced photos can only be deleted by syncing again with iTunes and deselecting all synced items.
See: iTunes: Syncing photos

12 bit audio synch issues

Hey all. I have a queation regarding 12 bit audio synch problems. I have digitized a tape recorded with 12 bit audio and am just now coming into video/audio synch issues and was wondering if anyone might have a workflow suggestion. Soecific questions are -
1 - Can I export the troubled clips to quicktime/ resample them at 16 bit and reimport?
2 - Some of the clips I already have edited and are in synch, do I need to correct them as well or will final cut do that on export?
3 - If I get a 12 bit/16 bit mixed bag on my timeline, can I export the mix to 2 track and convert before exporting it to compression?
ANy suggestions on how to work through this would be appreciated. I seem to have a lot of people coming to me with this setting and would like to know of any viable workflow solutions.
Thanks

1. Yes. Quicktime Pro, iTunes or third party audio editing software such as Peak can resample to 48khz/ 16 bit.
2. It would be best if you can get everything in the timeline to be 48khz/16 bit.
3. See #2.
Dope slap these fools who bring you 32khz stuff. Charge them MUCHO extra for your time.
x

Audio Synch issue

Hi,
So I have a .mov source file that contains footage captured from a Sony MiniDV camera (don't ask me why we were still using that in November of last year) and I believe I possibly screwed up the capture settings. The footage is 50 minutes of uncut interview and the audio gradually falls out of synch so that by the end it's about a half to a full second slower than the video. We need to edit the file simply to trim the ends so we have a clean fade in and out.
Here's the info on the file as displayed by the Finder
I imported it into Premiere Pro CS6, put it onto a sequence, and clicked "change sequence settings" to match the clip settings.
Here are the resulting settings:
I unlinked the audio track and moved it so that the sound of the two people high fiving was synched with the video. I cut both the video and audio tracks at that frame, deleted what came after the cut, and moved the audio back to its original position. I then looked at the duration of the video track, and adjusted the duration of the audio track to match. The result was that the audio speed was adjusted to 100.03%, and appeared synched throughout the video.
I thought I had solved my problem; however, when I exported the video the audio went back to falling out of synch slowly, exactly as it does in the source file.
I exported it initially as Format: H.264, Preset: NTSC DV. Then I exported it as H.264, Youtube HD 720p 23.976. Neither worked. The sample rate for both was 48 kHz, so unless I am mistaken, that matched the rate from the source audio.
This is beyond my technical ability and I don't know where to begin fixing it at this point. I no longer have the tape that the footage was on so I can't recapture it. How do I synch the audio and video?
Any help would be much appreciated.
Thanks!
Collin

Yes, the second export that I tried was with the Preset that is YouTube HD 720p 23.976. I've done this before with DV footage and it works fine, all that happens is that there are two thick black bars on the sides of the video. I only did this for one of the exports on this particular project though. The first time I tried to export it it was with the NTSC DV preset, and the synch issue was still a problem. So it is independent of the pixel ratio.

Lip Synch Issue?

Is anyone else experiencing a significant lip synch issue when using an optical (sound) / HDMI (video) setup?
I've been experiencing this since the new iPlayer update on a black box a couple of months ago to some degree. It wasn't too bad, but I had the box replaced last week when it developed a hardware fault. It had the non iPlayer release (bliss!), but on Monday the new update was applied overnight. The sound issue has come back with a vengeance - a lot worse than before. This is the first time I have used the latest (new style) release. This is happening on live TV.
After almost 3 years of uninterupted stable service, this iPlayer nonsense has really got me considering ditching Vision...
Thanks, Mark.

Guyincognito76 wrote:
Urm? And why aren't you using HDMI for the sound as well, is the HDMI going into the telly and the optical into a surround?
If the Vision box is playing sound correctly if connected directly to the TV then it must be the surround.
It's connected to a surround sound receiver that doesn't have HDMI inputs (just optical and component connections). It's not the receiver that is the problem as it works perfectly with BluRay, Wii, and Freesat. It also worked with no issues on the Vision box have until the new software release was applied on Monday.
The BT engineer that came out to fix the fault with the previous bit of kit admitted that the hardware is very reliable, but the software releases have caused a lot of issues for them. A bit of extra testing would be good before BT ship these releases out to everyone.

Photo synching issue

Similar Messages

Maybe you are looking for