PHOTO TAB NOT VISIBLE

I have the current version of Itunes and am wanting to sync my iphone but exclude certain photos, as am close to exceeding my capacity. I do not have a "photos" tab in Itunes and have tried showing/not showing sidebar, etc. Photos tab is not listed anywhere. Thanks for the help.

You will not see a Photo tab as you're Nano has not been updated/optimized for the Mac. Check your Nano software in "About" and see if it's still formatted as Fat32. If so, there's your problem. The solution in one of the Apple KB is to do a archive and install. Why, beacuse most likely you are missing the "iPodDriver.kext" file.

Similar Messages

Photos tab not working correctly when syncing to iphone

When I connect my iphone to itunes and then select it and the photo tab, I can not change any of the settings (ie my pictures selections, what folder to select. the only thing it will allow is the syncing of all photos in my pictures, (dont want 14, 247 photos on my phone). I have created a folder with select photos that I want to sync with iphone, but cant select it. anyone have a solution. do I have to delete current version of itunes and reload it again..?

OK I RESOLVED IT! I removed most of the photos from "My Pictures" and than I agreed to sync all of the remaining ones. Only then did it light up everything else and allow me to change the settings.

Function and attribute tabs not visible in ppoma_crm

Hello Experts,
Function and Attribute tab at the sales organization level is not visible in PPOMA_CRM transaction code for one of the user.
Is it due to some authorization issue ? or anything else ?
Before taking a system trace for that specific user, I would like to know if we are missing anything functionally
Kindly revert
Thanks and Regards
DJ

Hi DJ,
Please see note 926540 - Missing Organisational units
But from your description this does not seems to be the exact symptom.
Yes I would advise to run a SU53 authorization check.
Best regards - Christophe

Photos tab not showing up in iTunes

I just recently uploaded pictures for the first time from iPhone to computer (a Mac). I uploaded them to iPhoto because that was default but I was not able to see any 'Photos' tab in iTunes. It is here that I wish to delete the pictures I have uploaded because when I look at how much space is being taken up on the phone, nearly half of it is for photos. I have already deleted them from the phone itself but the space is still displayed as occupied in the iTunes summary page when I plug the device in.
So my question is - how can I view my photos in iTunes when the 'Photos' tab doesn't appear? Any and all help is greatly appreciated - mahalo!

Is your iTunes window set as wide as possible or full screen?
If so, try changing your screen resolution.

Photo tab not showing new folders

Hi, I've got a problem with syncing new photos onto my iPhone.
I took a few new pictures from my digital camera, and wish to put it on my iPhone. I placed my camera pictures into a folder called 'digital camera' into 'My Pictures' folder. I then open itunes, click iphone, photos tab, and the 'digital camera' is not listed below (I ticked sync selected photos so that I can choose/see what folders there are). Any new folder that I create in Windows, doesn't show up anymore in iTunes, but it is there when browsing the pictures folder.
Any idea how to fix this photo problem in iTunes? I am using Windows 7 by the way.
Cheers
Message was edited by: supersi90

So I've been investigating a bit more on our "invisible folders" those last days.
If I create a new catalog, the problem dissapears. I can create new folders, import pictures like I did before.
So I thought our catalog was maybe corrupt, I checked the integrety and it returned to be OK.
I also found a post describing how to repair a catalog with SQLite which I did but the problem still there.
So I decided to try to create a new catalog and import the former catalog to the new one, hoping to keep all the datas but that the problem would resolve. But the import also failed with the error "Lightroom could not import this catalog because of an unknown error".
Right now I don't have more ideas....
If anyone has a clue, just give a shot

Configuration tab not visible in the costom view created.

HI All,
My requirement is:
To create a view in the standard component : BT301i_lam (Financial service item level).
For this i followed following steps:
1> Added item component through EEWB.
2> Enhanced the component BT301I_LAM to add a custom view which will show the required details created through EEWB.
3> Now problem is , after view creation , the "CONFIGURATION" tab is not visible in the view.
    Also , in the runtime repository (where i can add my view to the overview page) i am not able to find the view.
Can anyone please tell me on where i went wrong.Please also provide the correct steps to add a custom view so as to show attributes added through EEWB.
Thanx.
Edited by: abhishek ranjan on Mar 25, 2011 10:48 AM

Hi,
Try with the below code in .HTM .
<%@page language="abap" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<chtmlb:configTable actionsMaxInRow       = "3"
                    displayMode           = "FALSE"
                    allRowsEditable       = "TRUE"
                    downloadToExcel       = "FALSE"
                    enableTableGraphics   = "TRUE"
                    id                    = "table"-------you can give your table id
                    onRowSelection        = "select"
                    personalizable        = "FALSE"
                    selectedRowIndex      = "<%= X->SELECTED_INDEX %>"
                    selectedRowIndexTable = "<%= X->SELECTION_TAB %>"
                    selectionMode         = "<%= X->SELECTION_MODE %>"
                    table                 = "//X/Table"
                    usage                 = "ASSIGNMENTBLOCK"
                    visibleFirstRow       = "<%= X->VISIBLE_FIRST_ROW_INDEX %>"
                    visibleRowCount       = "25"
                    width                 = "100%"
                    xml                   = "<%= controller->configuration_descr->get_config_data( ) %>" />
REPLACE X WITH YOUR CONTEXT NODE.
Regards,
Gangadhar.S
Edited by: gangadhar rao on Mar 25, 2011 1:47 PM

Email tabs not visible

Hi.
I've just migrated to BT mail so still finding my way around. One thing is bugging me (yes, only one at the moment!). When I open an email, read it and then want to simply move onto the next message, I can't find a way to do it! There's no "Next Message" or Previous message buttons. The Help suggests there should be an Inbox tab, which there is, and that each message should display in its own tab as it's opened, so I could switch between the tabs (as it was with BT Yahoo), but these tabs are not visible for me. There is an Inbox tab and then as I open a message no new tab displays (the Inbox tab just updates with the message). I have to click the Inbox in the left pane or the little icon next to the Inbox tab so I then lose the message. I can't find any setting, etc. Does anyone have any suggestions? I use Google Chrome so am wondering if that's got something to do with it.
Thanks in advance!

If you set it up as an IMAP account, not a POP3 account, it will replicate all your folders and emails that you have on webmail. You do not need to import them it will do it automatically.
See link for setting it up.
http://windows.microsoft.com/en-gb/windows-vista/windows-mail-setting-up-an-account-from-start-to-fi...
and this link for the settings you need.
http://bt.custhelp.com/app/answers/detail/a_id/44917/kw/bt%20mail/c/346,6588,6591
When setting it up select the manual set up rather than the wizard. Make sure you put the correct settings in the right place and you will have no problems. It will take you less than 15 minites to set up.
Hopefully once you have done that you will wonder why you ever used webmail.

Tab Not Visible in Internet Explorer 10

Hi,
We have developed application using oracle apex 4 and oracle 11g xe as database. Application runs perfect in Internet Explorer 8 and 9, Recently we upgraded browser to IE10 problem we are facing is there are more than 10 tabs in the application all the tabs are not visible in the application. Please suggest me how to fix this issue.
Thanks
Sudhir

Sudhir,
The fix you want is for the 10 tabs to work again in IE. Oh, boy! I hope someone can help with that.
But stepping back for a moment, 10 is a lot of tabs. Is 10 tabs all there will ever be? What if you need an 11th tab? I'm pointing out that it might be time to consider changing the way navigation is done. Now no one likes to comtemplate all the work and user disrutpion of changing the navigation method. But there's only so much room for displaying tabs.
But please see {thread:id=2519792} for some ideas.
Good luck,
Howard

Configuration tab not visible in CRM ORDER

Hi,
When I use the CRM_ORDER_MAINTAIN function module to create the CRM ORDER, the configuration tab is not visible and when I use the same data to create the CRM ORDER manually through CRMD_ORDER, i can see the configuration tab. What could be the problem?
Infact I am using CRMXIF_ORDER_SAVE FM to create the order.
Regards,
Roopesh

Hi,
Try with the below code in .HTM .
<%@page language="abap" %>
<%@extension name="thtmlb" prefix="thtmlb" %>
<%@extension name="chtmlb" prefix="chtmlb" %>
<%@extension name="bsp" prefix="bsp" %>
<chtmlb:configTable actionsMaxInRow       = "3"
                    displayMode           = "FALSE"
                    allRowsEditable       = "TRUE"
                    downloadToExcel       = "FALSE"
                    enableTableGraphics   = "TRUE"
                    id                    = "table"-------you can give your table id
                    onRowSelection        = "select"
                    personalizable        = "FALSE"
                    selectedRowIndex      = "<%= X->SELECTED_INDEX %>"
                    selectedRowIndexTable = "<%= X->SELECTION_TAB %>"
                    selectionMode         = "<%= X->SELECTION_MODE %>"
                    table                 = "//X/Table"
                    usage                 = "ASSIGNMENTBLOCK"
                    visibleFirstRow       = "<%= X->VISIBLE_FIRST_ROW_INDEX %>"
                    visibleRowCount       = "25"
                    width                 = "100%"
                    xml                   = "<%= controller->configuration_descr->get_config_data( ) %>" />
REPLACE X WITH YOUR CONTEXT NODE.
Regards,
Gangadhar.S
Edited by: gangadhar rao on Mar 25, 2011 1:47 PM

"Files" and other tabs not visible for document library after script editor webpart is added

I created a document library and uploaded a few documents to ti. On the ribbon, I could see both "Files" and "Library" tabs. I then added a Script Editor webpart to this page because I needed to run some javascript on this
page. Now, when I go to that document library page (AllItems.aspx) then I don't see the Files and Library tab. My guess is that this is because these tabs are context sensitive so they only appear when Sharepoint knows you're working with a document
library and since now I have both the webpart that shows the document library and the Script editor webpart, that context is not there. If I click somewhere on the page close to the actual list of documents, then the Files and Library tabs reappear since
now Sharepoint knows that I'm working with a document library. Is there any way aroudn this? We don't want to have to ask our customer to click somewhere on the screen in order to get access to these tabs. I'm not sure why Sharepoint would
be confused by the Script editor webpart. It is not visible so when the page is not in edit more, you can't even see that Script editor. So, my question is: is there any way to:
- either find some other way of using javascript on this page (maybe external javascript file with some link to it on the page?
- or, some way to force the Fiels and Library tabs to be visible no matter what (i.e. despite having the Script editor webpart on the page).
I also experienced this issue when I wanted to insert some customized text on the same page that had a document library. For example, I created a document library and then on the AllItems.aspx page I inserted a content editor webpart so that I can
show some text at the top. That also caused the Files and Library tabs to disappear.
thanks,

Hi,
I understand Files/Libraray tab disappear after you add web parts to a document library, once you click somewhere in library list, it will appear again.
This is by design. As workaround, please try to use SharePoint Desginer to edit Allitems page of document library instead of using script web part.
https://social.msdn.microsoft.com/Forums/office/en-US/fd1bb098-6425-437c-b3f8-25bf65bcaad3/ribbon-control-disappears-on-sharepoint2013-document-libraries-when-content-editor-web-part-has?forum=sharepointdevelopment
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

LifeTime tab not visible for WPC content

Hello,
For any WPC content if we go to Details -> Properties, there is tab called Lifetime where we can set from when to when this content is valid.
Some how it is not visible for any of my content in my new installation. I am using Portal 7.0 SP16.
Point will be awarded to resolve this issue.
Also I wanted to ask does this LifeTime means content should be unavailable after the Expiry period we set here, correct?
regards,
Jaish

I went to SAP Tech Ed in Las Vegas and came to know that there is bug in WPC for this so they removed this feature in SP16 of Portal 7.0. This is why I was not seeing this after the version update.

Adding photo's - 'photos' tab not appearing under device

I am trying to add some photos to my ipod touch in itunes. When my ipod appears under devices, I expand it but there is no photos tabe, just music, films etc. Any ideas?!

Yo need to select the iPod in iTunes then select the Photos tab across the top, not the folders on the left side of iTunes.

Competitors tab not visible in opportunities

Hi group!
I'm trying to find the way to show Competitors tab in opportunities, since it's not visible. I don't know what have we changed in customizing to have that tab hidden.
Any suggestions?
Thanks a lot
cheers
Jorgelina

It's solved already. Thanks anyway!

Pinned tabs not visible.

After I pin a tab In ff29 it disappears to the left of the tab row. I see an empty gray box there where the pinned tabs were visible in ff28.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Does it help to open a new window?

Visa server security tab not visible

I want to enable the visa server for remote visa connections to the serial port, when I go into MAX to setup the visa server security the tab is not visible. I have a 2nd system and I can see the tab. Is some setting needed to enable the security?

Hello Chris,
I would expect that this is because of a version difference in your two machines. What OS are they? What version of VISA are they using? You can see the VISA version in MAX under the software folder. Also, to clarify, are you speaking about the "VISA Options" tab that appears when you select NI-VISA from the software folder, or something else?
If you need to download a newer version of VISA, see here for all VISA versions:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BAC002C51FA?opendocument&node=132070_US
Hope this helps.
Scott B.
Applications Engineer
National Instruments

PHOTO TAB NOT VISIBLE

Similar Messages

Maybe you are looking for