Photo web page app.

Hi
Once I've found an application which allowed me to quickly create a single web page with photos and thumbnails, almost at a click of mouse button.
Can't find such app.
Anyone seen such?
Thank you

Search versiontracker.com or macupdate.com or use the new iWeb app:
http://www.apple.com/ilife/iweb/

Similar Messages

Photo Web Pages

Hello,
I have created a welcome page and a photo page for my unpublished web site. I'd like to have several photo areas on one photo web page but I can't figure out how. So far, I've only been sucessful creating one photo page where I can drag a bunch of pics but they are all in one slideshow . I'm sure creating multiple photo sections one one page is easy to do but I am missing it somehow. Any help is appreciated...
Thanks!

Welcome to the Apple Discussions. This Apple document will show you how to accomplish it: Create a living, growing photo gallery. It should work with the new version.

Cannot Add Approved App To A Web Page - App Does Not Show in the App Part Section.

Hi all,
I have successfully add an App from the SharePoint App Store to my SharePoint Site which was developed using SharePoint 2013. The added app was successfully Approved then when I try to add that app using the App Part to a web page I cannot Find it
in the App Part section. I looked in the Site Collection Features & Site Features I couldn't find the app to activate. I don't think I have done some kind of mistake. So then what else I have to do to add that App part to the web page.
Could someone try to solve this matter?
Thanks,
Regards,
Chiranthaka

First, are you sure the App contains an App Part? Not all Apps are written to have app parts. Second, did you add the app to the site collection from Add an App in the Site Contents page? Apps that are added and approved from the Store
are added to the App Catalog for the Web Application. You would normally add them to the Site Collection from there after they are approved.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Photo web page creation

I need some help trying to create a web page of photo thumbnails with blow-up larger images:
1) I want to create a contact sheet type of web page of multiple photo thumbnails.
2) When you click the photo it opens into a small window or "blow-up" version of the thumbnail. (Clicking the thumbnail does NOT take you to a new page with the full size image).
3) The blow-up photo has a circle and X that will close the blow-up window.
I've already figured out how create pages of thumbnails that will take you to a new page with the full size image. I'm trying to create the effect where you never leave the main page, the thumbnails just blow-up into small windows that can be closed again.
Apple uses this effect a lot with photos and movie clips on their page. An example of what I am trying to do can be found on the iLife/iPhoto/MobileMeGallery info page at Apple.
If you look to the right just under the main large banner images, there is a grey box titled "iPhoto Showcase." If you click one of the thumbnails there, the picture blows out to a larger size of the image, but doesn't take you to another page. The blow-up image has a little circle and X at the top left to close the window. Main page is still visible behind the blow-up window.
I'm using a fairly new MacBook with OS 10.5, Aperture 2.0, iWeb '08. I don't have a .Mac or MobileMe account yet. I'm a recent convert from the Darkside, so right now I use google's Picasa Web Albums and google's website creator for my site. If I can get this to work, I'll make the switch MobileMe once the early .Mac conversion kinks get worked out.
Thanks,
TDizzle...

No… no problems at all. I sometimes use my 2405FPW with my MBP and it works just fantastic.

How to use same credentials in third party web page/app/system as in Office 365 and Share Point?

I want my users to be able to login with same username/password in my reporting system as in they use for their email, office 365 and share point.
Since the web is in PHP i found some ideas that use CURL to get the cookie but i['m wondering if there is another way to do that?
All API show cases and docs that i looked are so confusing that i can't even figure out if it is possible at all and how. It would be great to be able to reset passwords through my system and also to create new users. So that i have all centralized in one
place.

Hi,
Here is an article which describes how to create and configure a single tenant PHP application that uses the single sign-on capabilities of Azure Active Directory.
http://azure.microsoft.com/en-us/documentation/articles/active-directory-php-web-single-sign-on/
A sample that shows how to use Azure Active Directory and single sign-on for PHP web sites is available at
https://github.com/WindowsAzure/azure-sdk-for-php-samples/tree/master/WAAD.WebSSO.PHP
Regards,
Rebecca Tu
TechNet Community Support

Workflow to make a simple photo web page...

I need a workflow to build a basic html page with rows of 4 thumbnail picts (already created to size) and links to a larger image (already created to size too).
I have 1,243 images and I need a simple method of producing.
I can't seem to get automator to work with golive.
Any help would be appreciated.
thanks, Hughray

Hi Hughray
Unless Golive has had Automator actions written for it then I fear you're out of luck. This which more or less presupposes that golive is AppleScriptable - I don't think it is.
I've just Googled golive automator actions and nothing positive came up.
Bad news, I'm afraid.
H

I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore. If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

I have just upgraded from CS 6 (Dreamweaver) and now when I click on a picture on a web page in Dreamweaver it doesn't go to the folder where the photo is stored anymore. If this continues I'll have to go back to CS 6 as I have to put in alot of photos.

I am using dw cc and I just double click picture I want to change in dreamweaver cc and my image folder opens, select new photo and then it updates and I am good to go, I am using a mac

HT4922 Downloaded 5.1.1. to my iphone. Now, Safari will not connect to my server. Can not download web pages and many of my apps. Running very slow sluggish! Is there a fix? Sound like other users are experiencing same problems. Anyone have a solution?

Downloaded 5.1.1 to my iphone. Now, Safari will not connect to my server. Can not download web pages and many of my apps. Email seems to be ok. iphone running slow and sluggish. I have read several other users have experienced the same problem. Any solutions?

Basic troubleshooting steps oultlined in the User Guide are restart, reset, restore from backup, restore as new device.
You need to go through all steps in succession until your problem is solved. If going through ALL these steps fails to resolve your issue, then you'll need to bring your phone into Apple for evaluation and possible replacement.

How to Open an Oracle Apps Screen from a web page

Hi,
We have requirement for Opening an Oracle Application screen (say sales order form) directly from a web page.
I could get the URL of the required screen, but the URL contains an ICX_TICKET number, which is generated dynamically by Oracle Apps. So I can't use a static URL for this.
Do you know how I can use or generate an ICX_TICKET in runtime? My user will have an active Oracle Application screen opened along with web page. He want to navigate to Oracle Apps screen from Web page. Hopes this makes the requirement more clear.
Thanks for your time,
Aneesh

Hi Helios,
I have identified a function to generate ICX_ticket. By appending this ticket, I am able to open the Oracle Apps screen. Now, is there in implication on the security side, if I go ahead this way?
Function
fnd_gfm.one_time_use_store(icx_sec.GetSessionCookie(CZ_CF_API.ICX_SESSION_TICKET),300,'FORMS_APPLET')
Anyways, I am raising an SR as u suggested.
Thank you,
Aneesh

Links to web page in any mail message will cause Mail app to hang, and won't open Safari.

Repeatable problem on iPhone or iPad.
Any link to a web page will cause Mail to lock up and become unresponsive, and won't open the web page in Safari.
The only way out of this is to back out to the home screen, double-click on the home button, then select the Mail app icon, holding it until I can "close" it. I can then relaunch Mail and look at any message I want just like normal. But if select any link, whether a text link or a picture in an email, the whole thing happens again.
Occurs on both my iPhone 5 and my iPad both running iOS 6.0.1.
Any suggestions that will allow me to go directly from a mail msg to a linked web page embedded within?

You ran a defective third-party "utility" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.
The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

How can I demo my mobile app on a web page? or standalone

Is there a way to show my Flex mobile app in a browser? either on a web page or standalone is ok.
I'm using Flash Builder 4.6 to build a mobile app for iOs (iphone 4) and when I debug it, it shows the program in a window like the phone,
Is there a way to wrap this up and give it to someone to run in a Flash-player-browser-like window?
thanks!
steve

You can do something similar to this by using Export Release Build and instructing FB to Export as "Signed AIR Package for installation on desktop"
This will create a file that can be installed on a computer and behaves much like a debugger execution. A few caveats are that the user will need to resize the window manually to match a "phone size" and mobile features (camera, gps, accelerometer, etc) will either be unavailable or behave very differently than on an actual phone (depending on your code implementation).
Still, for most apps, this will give your audience a good feel of what your app will be like when released on the phone market/store.

Can't open a link in a web page, goes immediately to down load and then when opened it shows downloaded to windows photo viewer, which won't open

I open a web page, in the web page there is a link to open another link. I click on this link and the doc is 'downloaded' automatically , I click on the 'green arrow' download button at top of screen, the page opens and says 'windows photo viewer can't open the picture because photo viewer doesn't support this file format or you don't have the latest update to photo viewer'!! I just want to open the link. Grateful for advice.

Where is that happening? Please provide the URL.

How can I add a Last Update to a web page with a web app.

I would like to know how to update a webpage whenever a web app item has been added or updated last.
I have the tag {tag_lastupdatedate} but it only works is only for the web app list or details page.
I want to be able to add the date and time as to when the entire list was last updated. Any suggestions? thanks!

Hi DLSAgency,
There is a module called {module_lastupdated} and it will display the date when the web page it's on has been last updated, but there is no module that will display when the web app list inside that page was last updated. There no such functionality in BC.
Cheers,
Mario

The app store on my iPad looks like a broken web page?

Hi! First, let me apologise if this is in the wrong ocation. If it is, please move the thread. Thanks! (Sorry.)
Now only the problem...
I'm no newb to technology so I'll do what I can to explain this. It's an intermittent and unusual issue, basically, and what happens is that for most of the day the app store looks like a broken web page (like CSS and images aren't loading), and I can only access it normally every now and then. But here's where it gets weird.
The PC iTunes is fine (both web and application) and loads images, behaves normally, and so on. No issues there. All sites are accessible, and I have no trouble reaching Apple servers (I've run latency checks).
What I've also tried:
- Rebooting my router (multiple times).
- Closing all apps on the iPad (including the store) then trying the app store (as the only app open).
- Rebooting the iPad, then trying again.
- Signing out of the store, rebooting the iPad, and signing in before trying again.
- Doing the above step but with all apps closed first.
- Browsing on the iPad (via Maven and Safari), both are fine. No weird Internet issues.
What boggles the mind is that the PC iTunes and web version of the app store works. I mean, if I go to the web app store and look at the page for a game, I get images of the game. If I use my iPad, I get the border of the image with a [?] icon in it. (As I said, it looks like a broken web page where CSS and images just aren't loading.)
Sometimes, but more rarely, I'll have trouble connecting to the store.
And occasionally (but even more rarely) it behaves just fine.
If it wasn't for the intermittent nature of it I'd be convinced that I'd somehow corrupted the app store on the iPad somehow. But the more I think about it the more I wonder if this is my ISP somehow being ridiculous despite the web/PC application working. And currently I'm really at a loss. It's worse because when I want to sit down and browse the app store to buy some things, I can't. So this is stopping me from giving Apple money.
It might just be my ISP though. My ISP is Surfwise, if it helps. As I said, no other Internet issues at all.

Boo. I can't edit. Sorry...
I also want to note that my iPad is -not- rooted and is quite new. And also that it's a third generation iPad.

Creating a Simple IOS / Android APP with web pages?

Hi all,
Recently I created a simple backend database driven website for a clients customers to see their info. The client wants to have his own "Company App", primarily for the marketing aspects. I was thinking that it might be possible to have a super simple basic app just showing/using the web pages that we already have.
I already made some pages with custom tailored css to iphone and could expand this concept to other models - android etc.
I have never tried to make an ios or andriod app before, but...
Q: Would it be possible to create a simple app DEMO that can display/use the css iphone page I already made? If I wanted to look more into this (and even work with other dev's) where would I start?

Mobile Apps are standalone pieces of mobile software that you design, compile with Phone Gap and then upload to Google Play or Apple's App store. From there mobile users can purchase (most are free) download & install apps on their device. Apps include just about everything from GPS & traffic info, to sports, games, entertainment, health & fitness tracking. You name it, it's probably out there. A mobile app is not a web site, although the app may indeed be tied to the creator's web site so he can sell more apps. But an app is just an app. A web site is a web site. 2 different things.
If you want to explore Mobile App development, I recommend this introductory tutorial
Create & package Mobile app with DW, jQuery Mobile & PhoneGap
http://www.adobe.com/devnet/dreamweaver/articles/dw-phonegap-mobile-app.html
Nancy O.

Photo web page app.

Similar Messages

Maybe you are looking for