Photo with wrong date and time in icloud

i tried to upload some old photo on icloud photo via PC (windows 7)
however the time of photos shown is 15 hours faster than it was capture.
Do anyone can tell me how to solve it? i want to add back all my old photos from my iphone 4 to my new iphone

Hey Tom -
Apologize for the delayed reply here. Below is what was emailed to me from the P.M. (yes, Product Manager) for FCPX:
"We do try to go into the DV packets during capture and pull out the original date of the capture that’s found in the bitstream.
However—The DV format spec does not require the original date be in the bitstream, and if it’s not there—we have no choice but to use the current date.
So, I can see how what you are describing could happen. Some of the footage has the date, and some doesn’t. If it’s there—it will be used, but we’re sometimes seeing it go missing."

Similar Messages

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator.

There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.

hey HAbrakian!
You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
Mac OS X: How to change the behavior of function keys
http://support.apple.com/kb/ht3399
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Wrong date and time in apple's mail client

All mails in my inbox are displaying date at 1429 a.c. Although through my web gmail interface, dates are correct the mac client is fault. I also tried with Thunderbird e-mail client and i also get wrong date and time. I checked the date and time preferences and everything is correct. Any suggestions?
Thanks

Hi,
In the Initial screen, please remove the tick for Display Header. It will not give any header details after execution. If you want to remove only date, you just check with your ABAPer, he can help by changing in program.
Thanks
Kishore Babu

IPhoto imports photos with wrong dates even if the dates are fine on the camera

Hi!
When I import photos with iPhoto, sometimes it imports them with wrong dates, even the dates are fine on the camera. It puts dates such as 2032. Does anyone know how can I fix that. As far as I know there is no way to change dates of the photos.
Thanks!

well that is very confusing since if the date is correct on the camera it will be correct in iPhoto
and as to
As far as I know there is no way to change dates of the photos.
Try looking through your iPhto menus - two commands - adjust time and date and batch change time and date - asjust is used to correct incorrect dates like a comera setting - Batch change for missing dates like with scans
LN

Retriving records with the date and time stamp

I need to get all the records that were update between 08:36:06 AM and 8:36:09 AM on the12/15/2009
I am using this query it is giving me the right numbers (I think) because this condition GURMAIL_CPLN_CODE = 'UGAP', I would like something more
precise using the date and time stamp with the dates
12/15/2009 08:36:06 AM
12/15/2009 08:36:07 AM
12/15/2009 08:36:08 AM
12/15/2009 08:36:09 AM
select * from GURMAIL
where
PERMAIL_CPLN_CODE = 'UGAP'
AND TO_CHAR(PERMAIL_ACTIVITY_DATE,'MM/DD/YYYYHH24:MI:SS AM') >= '12/15/2009 08:36%'Thank you

Yes, but HH24 and AM cannot be used together:
SQL> select to_date('12/15/2009 08:36:06 am', 'mm/dd/yyyy hh24:mi:ss am') from dual;
select to_date('12/15/2009 08:36:06 am', 'mm/dd/yyyy hh24:mi:ss am') from dual
ERRORE alla riga 1:
ORA-01818: 'HH24' impedisce l'uso dell'indicatore meridianoUse this:
select *
from   gurmail
where permail_cpln_code = 'UGAP'
AND    permail_activity_date between to_date('12/15/2009 08:36:06', 'mm/dd/yyyy hh24:mi:ss')
                                and to_date('12/15/2009 08:36:09', 'mm/dd/yyyy hh24:mi:ss')or this:
select *
from   gurmail
where permail_cpln_code = 'UGAP'
AND    permail_activity_date between to_date('12/15/2009 08:36:06 AM', 'mm/dd/yyyy hh:mi:ss am')
                                and to_date('12/15/2009 08:36:09 AM', 'mm/dd/yyyy hh:mi:ss am')Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2009/12/18/table-elimination-oppure-join-elimination-lottimizzatore-si-libera-della-zavorra/]
Edited by: Massimo Ruocchio on Dec 23, 2009 12:05 AM

Why does calendar keep changing dates and times on icloud

My calendar keeps randomly changing dates and times when using icloud and it is doing my head in.
Is there a simple way of rectifying this or do I have to get rid of icloud altogether (to save my sanity?)

If this is an iCloud calendar, you might want to check your time zone and time zone support settings. Go to icloud.com, sign into your iCloud account, click your name at the top and choose Account Settings, click Time Zone and be sure it shows the correct time zone and that you have selected a city near you. Then open your calendar on icloud.com, click the gear-shaped icon on the bottom left and choose Preferences, click the Advanced tab and make sure you have not checked time zone support at the top.
On your iOS devices, go to Settings>Mail,Contacts,Calendars>Time Zone Support (in the Calendars section) and make sure this is set to Off.

Af:inputDate with both date and time: modal popup forces validation

Hello,
I am using an af:inputDate with an af:convertDateTime type='both' (displaying date and time).
When the calendar popup is shown it's a modal popup. I guess it is because of the type='both'?
My problem is: when the modal popup is shown I get also the validation popup with errors (for example required fields) which is shown too.
Maybe someone could help?
Is there a way to force non-modal popup for this kind of calendar?
Is there a way to stop validation if I am already displaying another popup?
Thanks in advance,
Cindy

Hi,
U just override ok cancel button type="none"., inside the <af:panelGroupLayout id="pgl10" layout="horizontal" valign="middle">
<af:commandButton id="ok" text="Ok" action="#{beanName.okAction}" immediate="true"/>
<af:commandButton id="can" text="Cancel" action="#{beanName.cancelAction}" />
</af:panelGroupLayout>
Regards,
parame

Ftp get file with original date and time on one server to another server

Dear All,
I have successfully file copied from ftp server1 to ftp server2 but i cant get original file date and time.If anyone knows please help me...
i have using the package is sun.net.ftp.FtpClient .
Thanks
Andavar.P

Use the Apache commons-net library which has an excellent and easy to use FTP API, properly documented too.

Automator- create file names with creation date and time

I have photo files that I want to rename with a base name, plus a sequential number, based on the creation date (and ideally time). It appears that Automator does not honor the time of the source file when date stamping a new set of files. If there is anyway to use date + time so I can recreate a date_timestamp in addition to a base filename, that would be great.

Hi Nikhil_BI_Dev,
According to your description, you find your report runs properly in BIDS but shows blank after deploying onto report server. Right?
In this scenario, it might be the issue on retrieving data in SQL 2005. Here is a thread with same issue, please refer to the link below:
Detail report is blank after deploying
Reference:
Using SQL Server 2005 Reporting Services with SQL Server 2005 Express Edition
If you have any question, please feel fee to ask.
Best Regards,
Simon Hou

Problem with Inserting Date and Time in Oracle 8i

I am using JDBC thin driver version 8.1.6. with oracle 8i and am unable to insert and update date & time in American format
(mm/dd/yyyy hh24:mi:ss).
example:
UPDATE TABLE_NAME SET DATE_COLUMN='08/16/2000 12:45:00';
Can someone please help?
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Kanwal:
I am using JDBC thin driver version 8.1.6. with oracle 8i and am unable to insert and update date & time in American format
(mm/dd/yyyy hh24:mi:ss).
example:
UPDATE TABLE_NAME SET DATE_COLUMN='08/16/2000 12:45:00';
Can someone please help?
<HR></BLOCKQUOTE>
Hey Kanwal,
You can try the following statement
UPDATE TABLE_NAME SET DATE_COLUMN = to_date('08/16/2000 12:45:00','mm/dd/yyyy HH:MI:SS'
WHERE .... ;
null

Reversing A/P Invoice posted with wrong date and inventory cost adjustment

Here's the situation:
We had a PO dated 9/1/09 for items with a cost of $14.50, a Goods Receipt was entered 9/15/09 for the items with the same cost on the PO of $14.50. Somehow the order got lost in the mix and the AP invoice wasn't entered until today, with a posting date of 1/21/10 and the cost was corrected per the original vendor invoice to the right amount of $19.33. The invoice was actually dated 9/15/09. This resulted in hitting the vendor, purchases clearing and the inventory account (for the cost adjustment) in January 2010 when it should have occurred in September 2009.
The inventory itself has come and gone in the time between the GR and when the invoice was done with the incorrect date. Normally I would try to reverse the transaction with a Credit Memo and start over, however since the inventory side happened so long ago, I don't see any way of easily going backwards. I thought about doing service CM/invoice but what I am most concerned about is having the inventory valuation occur properly at the correct time. I'm not sure how to go about this.
Using SAP B1 2007A PL42 with moving average inventory.
Any thoughts would be appreciated.

Nicole,
I am afraid you may not have ability to do the adjustment based on historical date that long times ago. You know, the moving average has limited calculation based on current quantity and cost. There are no options to go backward especially new year is coming.
Thanks,
Gordon

Creating a folder on my HD with /current/ date and time with iCal

hi all.
new user here trying to tighten things up over here.
can anyone advise me as to whether there is a way to do this with iCal? i'd like to have a folder like this so i can see it easily on my various external backup drives and basically know very quickly how recent the update is that i am looking at.
also, is there a lot more to iCal than simply keeping my calendars updated and synce and possibly posted to the web or shared with others or whatever? i am loving the sync ability and the sonorous alerts but i am wondering if i can/need to read up on additional functionalities in iCal that keep me organized.
TIA

It's not clear what tool you are using to automate the process.
At least one of the 3rd-party Crystal Reports Desktop Scheduling tools listed at: http://www.kenhamady.com/bookmarks.html provides that functionality. It allows you to use Crystal Reports fields or formulas to dynamically set the export file path and name.

When i restart, the top bar with the date and time, networks, battery life etc.. all disappears and theres only the finder icon which gets stuck for some reason and wouldnt work either!

When restarting my macbook pro, all the options on the top right corner of the screen disappear ( battery life, Wifi, languages etc..) when i try to show them in system preferences once i click on network preferences the whole system preferences goes Not responding and i have to force quit it. the only way i found to bring them back is restarting my computer a number of times till they just come back alone. not sure what the problem is??? now i never shut down my computer cause i am worried i'll lose them again and for months i just put to sleep when i am done since nothing happens to them when its on sleep once i shut it down and turn it on again the same thing happens.
appreciate any answers...

You sure you're in the /Users/username/Library/Preferences/ folder? If yes, then that's your issue. That plist controls the right-hand menu bar.
log into a newly created admin user account and see if the problem persists. Then, check its Preference folder for that plist file.

Date and Time adjustments for multiple photos

Hello, thanks for providing the space for new users, and thanks in advance for your assistance.
I am currently moving out of apple aperture/iphoto and across to lightroom 5.
The OCD part of me likes to have my library organized, and I noticed that when I transferred my library across it is in a bit of a mess, so I am currently in the process of organizing the library and cleaning it up (approximately 18000 photos)
Any how, I have almost settled on a folder structure (YYYY/MM - I feel for the number of photos I have trying to nut down to day might be to much - happy to receive advise on this also)
For the most part, the photos have correct date and time from the commencement of the digital era (for me 2006 onwards)
Photos pre 2006 are in negative form, and I am currently in process of having these scanned and imported into library, I have a batch done every month. Adjusting the date and time from the creation date is where I am running into trouble.
I have looked around the web and various forums to no avail.
Firstly, I organize the photos into the correct order. I then select the first photo and the then select the remaining photos. I then select the adjust date/time from the menu and select the first option, adjust to new date and time, lets say 01/01/1990 at 1200 PM.
The result I end up with is the first photo (the more selected photo if correct term) has 01/01/1990 @ 1200 as date and time, the remaining have 01/01/1990 as date (if I am lucky), and the times jump all over the place. Sometimes it wont even change the date time for the remaining photos.
What I am trying to achieve is either the same Date/Time for all the photos when I select a batch, or have them increment in time by a standard amount (i.e 1 minute (1200/1201/1202) or 1 second (1200:00/1200:01/1200:02)), and I just dont seem to be able to work this out to automatically do this, currently I have to achieve this by a manual adjusting each photo (some 200 at a time) which is really labor intensive
Thanks in advance, and hoping an easy solution
Regards
Dean

Thanks, that seemed to fix the problem.
Workflow is:
1) In grid view arrange photos in correct order
2) Rename photos with a name & sequence (i.e. photos-1), this appears to then keep the photos organized as how I had arranged in grid view
3) Export photos & delete original photos from my master library
4) Open exported photos in an EXIF editor and change date & time to a common format (I am currently using the seasons as a guide, i.e. the photos that I recall being taken in spring are dated the first day of spring, using noon as the time)
5) Import back to Lightroom and organizing as per my usual structure.
This has allowed me to easily batch change date and times, keeping the correct order and has drastically reduce my workload, thanks for the suggestion!

Problem with date and time syncing itouch to macbook

i have a problem with the date and time on ical when i sync my itouch4 w my macbookair. whatever i entered into my calendar in itouch will appear different in my ical( with a 6 hrs advance difference) and the alarm i set on my itouch in the calendar doesnt ring at the right time as set even though it is shown the time that i wanted.
Both my macbook n itouch are set to the same time zone and i have checked this many many times n the time is the same on both machine. but i just dont understand why is there a time difference when synced and my alarm just dont sound at the time it was supposedly set. it rings hours later n showing a different time that it was set but in the parenthesis the right time that i had set it.
One time my computer ran out of battery n went into sleep mode and when i open it again, the time n date setting was all off. which im surprised why it had gone off. So did this create the problem i have now with the date n time sync or something else?
please help!!!!

Having the same problem, & am running Parallels (which I haven't used for some time) not boot camp. I tick the box labeled "Set time automatically" & lock the "click the lock to make changes". When I reboot, the Lock is unlocked and the "set time...." is unticked. Any ideas. Cheers.

Photo with wrong date and time in icloud

Similar Messages

Maybe you are looking for