Photobook freezes upon upload during ordering

After I have ordered the book, as the book begins to upload, the computer (MBA 11in 2010) freezes completely and only a complete hard shutdown and restart can resolve the freeze. Suggestions?

Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and order from there.
Before ordering the book make a PDF copy of it as described in this Apple document: iPhoto, Aperture: Previewing an order in iPhoto or Aperture. Check the PDF file for any errors, text, photos, etc. before ordering. Also keep the PDF file for reference to compare to the hard copy when you receive it.
OT

Similar Messages

ITunes opens only in safe mode; freezes upon normal opening (possible solutions that I found to similar problems don't seem to apply)

Hello. I've encountered a problem with my iTunes that I would like some help on solving. My computer uses Windows Vista. iTunes recently began to freeze as soon as I opened its window. On two occasions, it appeared to work the first time after turning the computer on, but would freeze upon subsequent openings. No error messages are given. It will either freeze while saying "Accessing iTunes Store," or without saying anything at all. However, iTunes appears to work just fine when I open it in safe mode (holding Shift + Ctrl while opening), although I have not yet attempted to sync a device while using safe mode. I attempted to update iTunes to its most recent version (10.6.3.25) after first experiencing this problem. The first time I tried, it didn't work, saying that "errors occured" during the update. I disabled my antivirus software (Kaspersky Antivirus 2012) and tried again. This time, my computer said that the update was successful. However, the freezing problem has persisted.
After looking through Apple support and other discussion topics, I found several things to check for (relating to similar problems) as follows. I checked for them, but they don't seem to apply to my situation. Here is what i found.
From Apple Support:
Check for third-party plugins in the following two folders:
-C:\Users\username\App Data\Roaming\Apple Computer\iTunes\iTunes Plug-ins\
Result: I found this folder, but it is empty, even with "Show hidden files and folders" enabled.
-C:\Program Files\iTunes\Plug-ins
Results: I did not find a "Plug-ins" folder in this directory, nor in the iTunes directory in Program Files (x86). However, there is a "Mozilla Plugins" folder in the (x86) directory, containing files "npitunes.dll" and "npitunes.xpt."
From Community Discussions:
-Conflict with Advanced SystemCare security tool by IObit or iCloud Control Panel
Result: These do not appear to be installed on my computer.
I also found something about Bonjour service, and that some people's similar problems were temporarily resolved when disabling Bonjour and reopening iTunes. I tried this, but it did not make a difference.
Does anyone have any ideas of what might be causing this? Thanks for the help!

No error messages are given. It will either freeze while saying "Accessing iTunes Store," or without saying anything at all.
I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Qosmio G30 freezes upon Norton Internet Security 2008 startup

Norton Internet Security 2008 will freeze my computer as soon it tries to load and the only way to go on is to restart the system by pressing the on/off-button.
My notebook is a Toshiba Qosmio G30-177 (Model No. PQG32E-02G022GR) with Vista Ultimate and NIS2007 pre-installed. I have no problems with this NIS2008 version on my other notebook (Qosmio F10 - PQF10E-02300JGR, WinXP MCE).
NIS2007 runs fine on my G30 and I do not have any problems at all, but newer versions of NIS seem to get in conflict with my system:
1. I am able to install and run the new version, download all updates and adjust the settings. Maybe one or two days later my computer will freeze after start exactly when the tray icon of NIS appears. For a couple of seconds there is just no response of the system at all and the LED's of my notebook show that all HD activity has stopped. After being idle for these couple of seconds, the cooling fan will start to operate at maximum power, creating a tremendous noise I never experienced before, not even while the CPU was running at 100% for some time due to other programs. Forcing a restart is all I can do.
2. Now this time, I successfully restarted my notebook again (took some attempts) and it suddenly did not freeze. Then I disabled firewall and auto-protect permanently, so there was no freezing upon startup and I just had to manually activate both firewall and auto-protect after start. In order to prevent freezing again after reboot, I always disabled NIS before shutdown. For the next one or two days this workaround was quite successful.
3. All of a sudden, after one or two days, this workaround is going to become useless, because the system starts to freeze again at the very moment the tray icon appears. In this case, restarting has no effect at all, and NIS will continue to freeze at startup. I also tried to prevent NIS form starting by no longer allowing ccApp.exe to automatically run upon start (administrative tools > system configuration > "startup" tab). This is successful and my notebook is able to start normally, but if I later try to start NIS manually, it will freeze again.
I had this problem since NIS2008 was just released, so I thought that meanwhile a Windows or Norton update might have fixed the issue, but this weekend I gave NIS2008 another try without success. I am almost sure that the problem is not caused by any other software than Windows and/or Norton, because I also tried to install NIS after a full system recovery, thus having only pre-installed NIS2007 and Vista on my notebook. I did use the Norton removal tool and followed the deinstall instructions before trying to install the newer version of course.
My last hope was that the NIS2009beta version somehow would not freeze my system, but it does. It does not matter if I try to run 2008 or 2009beta version, the problem is exactly the same.
What really drives me almost crazy is the fact that NIS runs perfectly for some time, then needs a rather small workaround, and then after some time totally refuses to work. In these couple of days I did not change any system settings, install or deinstall any programs or did anything that I felt could conflict with NIS...
So far, I have no idea of a solution and have to use NIS2007 again.
Does anybody know how to solve this problem?

Hi !
I use NIS since 2001 and never had any serious trouble with this software.
There could be some compatibility problem, but I don't think that Vista is causing it, because otherwise a lot more people should have the same problem. Even the installation of all current Windows, NIS and Qosmio updates did not solve it. Of course I tried to get help using Symantec's Support and their user forums, but without success. This problem seems to be a rare one (unfortunately for me). I tested the NIS2009beta and even though it's a new version, the PC freezes again when this program starts. And this made me think that maybe a service or setup by Toshiba causes the problem and other Vista users are not affected. It's a strange thing that the pre-installed NIS2007 version is running fine...
Cheers,
Mario

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" pop up. There was no error message all along when I created the book.

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" appeard. There was no error message all along when I created the book. I tried several time but failed.

preview the order and try again - http://support.apple.com/kb/HT1040
If it still does not work boot into Safe Mode, preview again and try
With the number of reports in the last few days it may be server overload - if so trying during a time of lower activity might help
LN

Error in uploading customer orders..?

Hello gurus,
those who have worked or working on singleview,pls help
we have a system in which all customer orders are uploaded in "Order_..... .xml" format.
these orders xml's with a max line limit of 40 get uploaded on my current configuration(ubbconfig.tpl)
but if i have a order xml of line above 40 ,i need to change the configuration temporarily
so i take down the application ,change the mode,& up it on a new configuration..
this is hectic..it takes a lot of time...(even for a "single" such file ...it takes 30-40 mins )
Most of the times...we get a "TIME-OUT " error if we try uploading such file without changing configuration...
i was thinking of increasing "TRANTIME" ..but still directionless...
regards
Abhijeet

mode: changing the configuration;
i take down the billing application;
i have a simple script which looks like this:
$ less tpmtuxconfchange
#!/bin/ksh
case $1 in
-load)
echo psr | tmadmin -r 2>/dev/null | grep BBL >/dev/null
if [ $? == 0 ]
then
print "shutdown billing before running $0"
exit 1;
fi
if [ -f $ATA_DATA_SERVER_CONFIG/tmunloadcf.ubb ]
then
tmloadcf $ATA_DATA_SERVER_CONFIG/tmunloadcf.ubb
exit 0;
fi
-old)
echo psr | tmadmin -r 2>/dev/null | grep BBL >/dev/null
if [ $? == 0 ]
then
print "shutdown billing before running $0"
exit 1;
fi
if [ -f $ATA_DATA_SERVER_CONFIG/ubbconfig ]
then
tmloadcf $ATA_DATA_SERVER_CONFIG/ubbconfig
exit 0;
fi
esac
now i run this script with "-load" as my argument & start the application.
On this configuration,i can upload "those" files..
once done,i again take down the application & run the same script with "-old" which is nothing but my actual & original configuration (ubbconfig)
This whole procedure takes a lot of time...
i tried to find out diffrences in both these configuration files:
i found following few:
ubbconfig tmunloadcf.ubb
SYSTEM
ACCESS PROTECTED FASTPATH
RWDB 1 MIN=24 MIN=30
{i am focusing on this RWDB 1 as this is required for creation of services & xml parsing during order uploads.}
TRANTIME 300 3000
I am not able to post both these files on forum...!!
But this is what the scenario is.....i am trying for a solution so that "n" numbered order xml can be uploaded without taking application downtime.
Thanks & Regards
Abhijeet K

Why is our photobook failing to upload

Why is our photobook failing to upload?

Have you previewed your book? Sometimes there are photos in your book, that cannot be processed.
See: iPhoto, Aperture: Previewing an order in iPhoto or Aperture
If the preview is o.k., but the book still will not upload, check your network. Disable your firewall and antivirus filter.
If all fails, try to order your book in Safe Boot mode: Mac OS X: What is Safe Boot, Safe Mode?
Regards
Léonie

How to upload Sales Orders into B1 from an excel file?

Hi,
I'm a new comer. I'm looking for a program of uploading Sales Orders into B1 from an excel file. Where can I find a reference book for it? Or I appreciate if someone could offer a program sample.
Thanks
ZAP

Hello ZAP.
I do not have such code, but i this link /people/janos.nagy/blog/2010/01/25/exporting--importing-authorization-using-ms-excel-in-sap-b1 you can find an excel example about authorization, and using Single Sign On (SAP B1 must have run with excel)
The method is similar, you can run any DI API operation from excel.
Here is an example to add a sales order
Dim oDoc As SAPbobsCOM.Documents = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
 oDoc.CardCode = CUSTOMER_CODE
 oDoc.DocDate = Today
 oDoc.DocDueDate = Today
 oDoc.Lines.SetCurrentLine(0)
 oDoc.Lines.ItemCode = ITEMCODE
 oDoc.Lines.Quantity = QTY
 oDoc.Lines.UnitPrice = PRICE
 If oDoc.Add <> 0 Then
 MsgBox("Error " + oCompany.GetLastErrorDescription())
 Else
 MsgBox("SAles order added")
 End If
You can repeat the setcurrentline section as many time as lines you have in the SO:
Regards,
J.
Ps: Reference: SDK help and sample programs, which included in every patch.
Edited by: János Nagy on Feb 10, 2010 9:50 AM

Upload Purchase order text tab using BDC

Is it possible to upload Purchase order text tab in material master (tcode mm01) using a BDC.
If so pls tell me how to upload the same, what is the field name of the box.
Regards,
Senthil

u need to use READ_TEXT or SAVE_TEXT or WRITE_TEXT or COMMIT_TEXT to upload text into SAP.

Doubt in uploading purchase order data using BDC

Hi friends,
how to upload purchase order data.
1) In both BDC and BAPI which one is preferable?
2) for suppose if it is through BDC, how to use? what are the transactions that we can use(SHDB, ME21N,ME21)?
3) To execute the job in background, is it possible for both call transaction and session method.
Thanks in advance
Sreenivas k

It really depends on the number of records you have. Still for a set of 5,000 records my answer to your questions will be:
1) In both BDC and BAPI which one is preferable? - Go with BDC
2) for suppose if it is through BDC, how to use? what are the transactions that we can use(SHDB, ME21N,ME21)? - Yes, its SHDB for recording, SE38 for abap program and ME21 for PO. Avoid SAP Enjoy transactions for recording as you may end up having problems wiht it.
3) To execute the job in background, is it possible for both call transaction and session method. - If you use call transaction method then you have to schedule the job to run in background or simply run it through F9 instead of F8. In case of session method you can chose to process the session in background. However I would suggest you go with BDC Session method for this.
- Guru
Reward points for helpful answers

How to upload sales order line items?

SAPGurus,
For years my customer service department has been asking for a way to upload sales order line items into the VA01 sales order-entry screen.
Many of our customers submit PO's with huge amount of line items, up to 1,000 lines. Our CS reps need to key in the data line by line (or copy/paste
approx 17 lines at once from Excel into the VA01 screen), and we are looking for a way to make this process leaner. One idea we have is that user creates the order header, and then has a way to upload the material numbers and quantities in a separate (newly created Z-transaction) screen in one go.
Obviously rules then need to be built that deal with the various pop-up messages related to e.g. ATP, material status, etc.
Does anyone have any experience or thoughts on how we could achieve this? A way to make the sales order-entry process a bit less time-consuming? Any feedback would be greatly appreciated !
Thank you,
RVS

Take the inputs from this Blog created by SUNIL PILLAI
Sales Documents upload using Standard Direct Input Program in LSMW
G. Lakshmipathi

PPCO0007 User Exit for Changing Header Fields During Order (CO40)

.. Hi !!!!
I need your help or suggestions,
I need to change the standar order before to save, i found the user exit PPCO0007,
i assign the new value for the order, but when finish the fuction, EXIT_SAPLCOZV_001, the new values are
lost, and finally the system set the standard order.
Someona know how can change the order and the the batch.
Thanks
Noemí Huerta

Hi Noemi
You can use the enchancement PPCO0007 (exit when the production order is saved).
Use the function module EXIT_SAPLCOZV_001 (User Exit for Checking or Changing Header Fields During Order Save) to update the field priority starting the information in the material-customer info record.

Capture re pricing during order creation/change

Hi,
I have to differentiate between standard pricing and re-pricing ( when user has pressed update button on the conditions tab ) in a sales order.
How and where can i get this information during order creation / change.
Thanks for your replies.
Abhishek

hi,
KALSM is the pricing procedure and it will be same for the document during creation and re-pricing, how dose it help in determining if user pressed update button.
Thanks,
Abhishek

I have a MacBook Pro, it recently started freezing upon startup. It would get to a blue screen and just sit there. I've tried booting in safemode to run disk repair and still doesnt help. If I do manage to get past the blue screen, it still freezes

My mac keeps freezing upon startup. It will get to the blue screen and promptly freeze. If I manage to get past the blue screen, and open up youtube on google chrome, it will freeze before it loads youtube. I've tried safeboot and disk repair, nothing seems to work. I even tried to factory reset it but it wont connect to my internet when I reboot with power + option.. any ideas?

This can be used to boot the machine and delelte enough files to get it to boot normally.
.Create a data recovery/undelete external boot drive
Read about storage drive so you can store your extra stuff.
Most commonly used backup methods
Also here to see how a full boot drive slows the machine down
Why is my computer slow?

Uploading sales orders in background

Hi everyone,
Iam trying to upload sales orders in background.As my program is a customised program of the standard sales order uplaod program RVINVB10 ,it is a direct input program which updates the tables using the function modules.
So to run direct input programs in background we are using transaction BMV0,creating a job and running it with the desired variant.the file which has the salesorders to be uploaded is also in the application server.
the problem is we have to upload bulk data so when ever an error occurs in the transaction BMV0,it says "Job cancelled after system exception ERROR_MESSAGE" . but my requirement is it should log the error and continue creating the other orders and log all the errors possible instead of cancelling the job.
please help.
Regards,
Sravanthi

Hi,
One your bapi has returned the error table 'GT_RETURN'... you can use the following logic...
LOOP AT gt_return INTO gs_return WHERE type CA 'AE'.
    CLEAR gs_bapi_errors.
    CALL FUNCTION 'MESSAGE_TEXT_BUILD'
         EXPORTING
              msgid               = gs_return-id
              msgnr               = gs_return-number
              msgv1               = gs_return-message_v1
              msgv2               = gs_return-message_v2
              msgv3               = gs_return-message_v3
              msgv4               = gs_return-message_v4
         IMPORTING
              message_text_output = gs_bapi_errors.
    APPEND gs_bapi_errors TO gt_bapi_errors.
ENDLOOP.
* Update successful
IF gt_bapi_errors[] IS INITIAL.
    REFRESH gt_return.
    CLEAR ls_return.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
         EXPORTING
              wait   = c_x
         IMPORTING
              return = ls_return.
    IF NOT ls_return IS INITIAL.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      APPEND ls_return TO gt_return.
      PERFORM store_bapi_errors.
    ENDIF.
* Update failed
ELSE.
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
ENDIF.
This will not interrupt your processing...

I almost complete uploading a 32 page iPhoto book, on a number of occasions when I get an error message stating "An error occurred uploading your order" can anyone tell me why and provide a solution please?

I am having problems uploading a photo book from my MacBook Pro!!! I almost complete uploading this 32 page iPhoto book when I get an error message stating "An error occurred uploading your order" This error message has occurred for each of my four attemps to upload. I have carried out a Disk Utility-Verify hard drive check and swapped from wireless to ethernet and still no joy. Can anyone suggest why this might be occurring and provide a solution please?

Boot into Safe Mode and try again.

Photobook freezes upon upload during ordering

Similar Messages

Maybe you are looking for