Photobook Pic Quality with warning.
I know it was kind of stupid, but I really needed to get the book order in so I sent it in with a couple pictures still having the low image quality warning. I just want to be prepared, are those photos going to be absolute messes, or do they just come out kind of blurry? If its the second then its fine, but if its the first I'm in trouble. The pictures look absolutely fine on screen and I know that doesnt mean they will come out that way, but as long as you can see who it is in the pictures i dont care. Any past experiences for people would really help! I dont understand pixel or techno stuff so dont tell me that kind of thing. Just let me know if they're going to be extremely bad or just kind of blurry.
Any past experiences for people would really help! I dont understand pixel or techno stuff so dont tell me that kind of thing. Just let me know if they're going to be extremely bad or just kind of blurry.
THat is like demanding to know how much it will cost to fill your gas tank and refusing to get involved with techno stuff like the price per gallon and how empty the tank is - the gas gage
I'm sorry but the only answer involves techno pixels stuff
If you print a 85x110 pixel photo as a full 8.5"x11" page it will have a yellow triangle and be absolutely terrible printed
On the other hand if you print a 1521x1969 pixel photo on that page it will have a yellow triangle and be just fine
The only answer to your question involves techno pixel stuff
iPhoto give you a warning at anything below 180 dpi - your screen resolution is 72 dpi - so photo between 72 dpi and 180 dpi will look perfect on the screen but give a yellow triangle - a 72 dpi photo probably will be extremely bad - a 179 dpi photo will not even be kind of blurry
So the only answer to you question is what is the actual dpi - and the only answer to that involves those techno pixels and those techno inches and that techno math, division
To figure the dpi take the techno pixel dimensions of the photo and divide by the techno inches that the photo will print in the book - a 400x300 pixel photo printing 4" x 3" will be 100 dpi - a 600x 450 pixel photo would print at 150 dpi
Generally (and everyone's perception of quality is different) anything below 100 dpi will be bad - above 150 dpi will be ok and between those progressively worse as the dpi goes down
LN
Message was edited by: LarryHN
Similar Messages
-
Just got iPad 2, really disappointed in pic quality of camera. Can anything be done to improve? How many megapixels is it?
The iPad cameras are designed primarily for use with FaceTime. Increasing the amount of ambient lighting will improve the quality of still but they will still never match those taken with a "real" camera.
-
Report "completed with warning " APP-FND-00500: AFPPRN received a return
hi ,
i am getting this error while running a report.while searching on google i foundn it's printer issue but when i submit it with different printer name it running fine but it always completed with warning with that specific printer .so what should i do ?
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_ORG_ID='200'
P_PO_NO_FROM='9068'
P_PO_NO_TO='9068'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Report Builder: Release 6.0.8.25.0 - Production on Fri Dec 2 16:56:40 2011
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT -------------
Printing output file.
Request ID : 6098208
Number of copies : 1
Printer : wkwcomm
wkwcomm: service-unavailable
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
Finished executing request completion options.Please post the details of the application release, database version and OS.
i am getting this error while running a report.while searching on google i foundn it's printer issue but when i submit it with different printer name it running fine but it always completed with warning with that specific printer .so what should i do ?Is this a custom or seeded concurrent program?
Is the issue with this report only?
Is this output from the printer that the report complete successfully with warning?
Do you get an output file?
wkwcomm: service-unavailableIs wkwcomm the printer name (queue name)?
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1Apps Print Requests Fail with lp: unable to print file: client-error-not-found [ID 359890.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=APP-FND-00500&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001 -
COncurrent process fails with warning for OPP
Concurrent process generates xml output (version 5.6.2) .
When it tries to publish it , the log suggests checking out the OPP log.
The OPP log has a series of java entries for the request, including one of the type
Caused by: oracle.xdo.parser.v2.XPathException: Expected 'QNAME' instead of ''.
header of the OPP log says
Resolution History
18-OCT-06 20:36:05 GMT
Can you easily recover from, bypass or work around the problem? = NO
Does your system or application continue normally after the problem occurs? =
YES
Are the standard features of the system or application still available; is the
loss of service minor? = YES
### Informational Only:Warning Presented to Customer ###
You chose 'Other technical issues with this product' from the Type of Problem
list. This is a generic Service Request form which will require additional time
to be routed appropriately. You may be able to expedite the resolution of your
Service Request by doing the following: 1. Use your browser’s back button to
return to the Create a SR – Brief Description page. 2. Select an option from
the Type of Problem list that more closely describes the problem.
### Requested files:ACT(Note 183274.1),RDA (Note 175853.1). Files to be loaded.
None
### Detailed Problem Statement ###
Concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.
Attached are OPP Manager log file, Screen shot of 'Preview' output jjst before
submitting request. Also log file of failed concurrent request which contains
standard error " See OPP Service log file for more".
### Steps to Reproduce Problem ###
Registered a concurrent process with XML template , and running the process
from Receivables Manager responsibility.
Ran concurrent process for 1) Standard RAXINV report , with output method as
'XML'. 2) Customised RAXINV report, with output method as 'XML'
### Instance Name(s) and Type of System(s) Where Error Occurs ###
Lunix, 11.5.10 on 10g
### Recent Changes to this Environment ###
None
### Workarounds Used ###
None
### How is this Issue Impacting Your Business ###
Business is readying for CRP3, so would like to have reports ready by then.
Contact me via : MetaLink
18-OCT-06 20:48:07 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\XML_Pub1.bmp
18-OCT-06 20:49:14 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\XMLPublisher_java.t
xt
18-OCT-06 21:17:26 GMT
Hi Bashobi,
Thank you for using MetaLink. We are currently reviewing/researching the situation and will update the SR as soon as we have relevant information
Best Regards,
Bill
Oracle Support Services
STATUS
=======
@WIP -- Work In Progress
18-OCT-06 21:18:04 GMT
Email Update button has been pressed: Sending email to [email protected].
18-OCT-06 21:21:45 GMT
ISSUE CLARIFICATION
====================
On 11.5.10.2 in Production:
Find concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.
EXPECTED BEHAVIOR
Expect the processes run successfully
STEPS
The issue can be reproduced at will with the following steps:
1. Registered a concurrent process with XML template .
2. Run the process from Receivables Manager responsibility.
3. Ran concurrent process for
1) Standard RAXINV report , with output method as 'XML'
2) Customised RAXINV report, with output method as 'XML'
BUSINESS IMPACT
The issue has the following business impact:
Business is readying for CRP3, so would like to have reports ready by then.
ACTION PLAN
============
Hi Bashobi,
1. Can you reproduce the issue from sysadmin responsibility with Active users report? if yes
please upload OPP log file after reproduce it and upload the request log file.
Thanks.
18-OCT-06 23:09:02 GMT
New info : [email protected] : Did the same as suggested, Request
completes successfully.
But what is the relation between Active Users report and a report sent via XML
Publisher?
19-OCT-06 15:54:26 GMT
ACTION PLAN
============
Hi Bashobi,
1. When you reproduce the issue from sysadmin responsibility with Active users report change the format out put to XML,
Save your change:
2. Upload OPP manager log file and upload the request log file.
Thanks,
Bill.
19-OCT-06 15:54:33 GMT
Email Update button has been pressed: Sending email to [email protected].
19-OCT-06 16:42:23 GMT
New info : [email protected] : Bill,
No, I could not reproduce the problem with Active Users program.
Attaching OPP manager log in the next update. Bashobi
19-OCT-06 17:05:07 GMT
New info : [email protected] : Bill, Attaching internal log and manager
log
Bashobi
19-OCT-06 17:06:08 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\OPP_internal_log.tx
t
19-OCT-06 17:07:10 GMT
The customer : [email protected] : has uploaded the following file via MetaLink:
C:\Documents_and_Settings\broy\BareEscentuals\Reports\Errors\OPP_manager_log.txt
19-OCT-06 18:14:32 GMT
UPDATE
=======
Hi Bashobi,
Thank you for providing the requested information.
Best Regards,
Bill
STATUS
=======
@WIP -- Work In Progress
19-OCT-06 18:14:36 GMT
Email Update button has been pressed: Sending email to [email protected].
19-OCT-06 18:59:25 GMT
DATA COLLECTED
===============
SCREEN SHOTS
XML_Pub1.bmp:
Error:
Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob...........
LOG FILE
1. XMLPublisher_java.txt:
[10/18/06 11:16:57 AM] [5670:RT277479] Completed post-processing actions for request 277479.
[10/18/06 11:29:06 AM] [OPPServiceThread1] Post-processing request 277488.
[10/18/06 11:29:06 AM] [5670:RT277488] Executing post-processing actions for request 2
77488.
[10/18/06 11:29:06 AM] [5670:RT277488] Starting XML Publisher post-processing action.
[10/18/06 11:29:06 AM] [5670:RT277488]
Template code: XXBE_TEST_INV
Template app: AR
Language: en
Territory: US
Output type: null
[10/18/06 11:29:07 AM] [UNEXPECTED] [5670:RT277488] java.lang.reflect.InvocationTarg
etException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
10/18/06 11:29:07 AM] [5670:RT277488] Completed post-processing actions for reque
st 277488.
2. OPP_manager_log.txt:
[10/19/06 5:22:36 AM] [main] Starting GSF service with concurrent process id = 5688.
[10/19/06 5:22:36 AM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[10/19/06 5:22:37 AM] [Thread-12] Service thread starting up.
[10/19/06 5:22:37 AM] [Thread-13] Service thread starting up.
ISSUE VERIFICATION
=================
Issue veryfied by the screen shots: XML_Pub1.bmp which shows:
Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob...........
ACTION PLAN
============
Hi Bashobi,
1. Since you can not reproduce the issue from sysadmin responsibility can we say the issue specific to Receivables Manager
responsibility<INV xml report>?
2. You said before: "Concurrent process for XML Publisher fails with warning. Cannot see Diagnostics
--> XML output completely. Only first page visible. Buttons and Menu items
disabled not allowing to view the whole XML file to troubleshoot for
correct/incorrect tags.":
Is the above mean :
-The xml publisher report completed but you can not view the whole XML file
-Or the xml publisher report error out with "Jave.sql SQL Exception No corresponding LOB data found: select File_data_dbms_lob.."
Thanks.
19-OCT-06 18:59:32 GMT
Email Update button has been pressed: Sending email to [email protected].
20-OCT-06 21:36:13 GMT
Email Update button has been pressed: Sending email to [email protected].
24-OCT-06 21:50:06 GMT
New info : [email protected] : Hi,
We are in the process of upgrading XML Publisher at the moment. I would like to
wait a day or two to test the report with the upgrade.
Thanks,Bashobi
26-OCT-06 20:15:07 GMT
New info : [email protected] : Hi,
Our DBA has applied the 5.6.2 patch on our dev instance. My concurrent process
runs to a warning.
The warnings in the OPP manager log file say
Template code: BE_RAXINV
Template app: XXBE
Language: en
Territory: US
Output type: PDF
[10/26/06 12:50:13 PM] [UNEXPECTED] [5849:RT281617]
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any idea?Hi All,
I have ran into the same issue.
"The Output Post-processor is running but has not picked up this request.
Any ideas.
Thanks
Ravi -
XML generated with Warning: Not enough storage is available to complete ..
Hello Experts,
Using XML publisher to generate a report. Report is generated when data is less. I get Not enough storage is available to complete this operation warning when there is a huge data.
The same problem is mentioned here XML Publisher report ends up with Warning: not enough storage is availableHi Fabien,
If Uint8Array works fine on the other computer, it should not be the problem of the API, but instead it could be the setting or configuration for IE.
Actually using XHR for 500MB zip file is not suggested, base on the documentation:
How to download a file, XHR wraps an
XMLHttpRequest call in a promise, which is not a good approach for big item download, please use
Background Transfer instead, which is designed to receive big items.
Simply search on the Internet, and looks like the not enough storage error is a potential issue while using XMLHttpRequest:
http://forums.asp.net/p/1985921/5692494.aspx?PRB+XMLHttpRequest+returns+error+Not+enough+storage+is+available+to+complete+this+operation, however I'm not familiar with how to solve the XMLHttpRequest issues.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
URGENT: XML Report with warning(java.lang.StackOverflowError)
Hello,
I have created a custom report using XML Publisher(with PDF output). The report runs fine for limited data. But when more than 3 Lakh records are retrieved, the report gets completed with Warning.
The log details show the following error message:
------------- 1) PUBLISH -------------
Beginning post-processing of request 18175653 on node PWXS3Q-E at 25-JUL-2008 06:56:22.
Post-processing of request 18175653 failed at 25-JUL-2008 06:58:01 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
The OPP log shows the following message:
[7/24/08 10:37:04 PM] [main] Starting GSF service with concurrent process id = 297839.
[7/24/08 10:37:04 PM] [main] Initialization Parameters:
oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[7/24/08 10:37:05 PM] [Thread-25] Service thread starting up.
[7/24/08 10:37:05 PM] [Thread-26] Service thread starting up.
[7/25/08 6:56:23 AM] [OPPServiceThread1] Post-processing request 18175653.
[7/25/08 6:56:23 AM] [297839:RT18175653] Executing post-processing actions for request 18175653.
[7/25/08 6:56:24 AM] [297839:RT18175653] Starting XML Publisher post-processing action.
[7/25/08 6:56:24 AM] [297839:RT18175653]
Template code: PFOA249P
Template app: XXPOP
Language: nl
Territory: NL
Output type: PDF
[7/25/08 6:58:00 AM] [UNEXPECTED] [297839:RT18175653] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:580)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:378)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:197)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:156)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:916)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:869)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:204)
at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1497)
at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:913)
at
oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:1816)
at
oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:1278)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
Caused by: java.lang.StackOverflowError
[7/25/08 6:58:01 AM] [297839:RT18175653] Completed post-processing actions for request 18175653.
Any help would be greatly appreciatedNote:315477.1 : XML Report Publisher Fails With java.lang.OutOfMemoryError.
Could any one point me to the right place where i can find this note. I searched in Oracle metalink and google but no success.Here you go ..
Note: 315477.1 - XML Report Publisher Fails With java.lang.OutOfMemoryError
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=315477.1 -
Post-processing actions failed (Report Completed with Warning Status)
Hi Friends,
I'm developing custom PO Report using XMLP 5.0.0. Preview Of Template is coming properly while running the report , it completed with Warning Status.The Report is not working in UAT while it was passed DEV and TEST Env successfully. Please look at the below log details and help me
------------- 1) PUBLISH -------------
Beginning post-processing of request 654357 on node GOLDBQ at 20-JUN-2007 08:07:22.
Post-processing of request 654357 failed at 20-JUN-2007 08:07:32 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT -------------
OPP Log Details
[6/20/07 10:22:04 AM] [OPPServiceThread1] Post-processing request 654539.
[6/20/07 10:22:05 AM] [3039:RT654539] Executing post-processing actions for request 654539.
[6/20/07 10:22:06 AM] [3039:RT654539] Starting XML Publisher post-processing action.
[6/20/07 10:22:06 AM] [3039:RT654539]
Template code: XXTCPOXPRPOPG
Template app: XXTC
Language: en
Territory: GB
Output type: PDF
[6/20/07 10:22:07 AM] [UNEXPECTED] [3039:RT654539] java.sql.SQLException: Non supported SQL92 token at position: 1:
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java(Compiled Code))
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java(Inlined Compiled Code))
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java(Inlined Compiled Code))
at oracle.jdbc.driver.OracleSql.handleToken(OracleSql.java(Compiled Code))
at oracle.jdbc.driver.OracleSql.handleODBC(OracleSql.java(Compiled Code))
at oracle.jdbc.driver.OracleSql.parse(OracleSql.java(Inlined Compiled Code))
at oracle.jdbc.driver.OracleConnection.nativeSQL(OracleConnection.java(Compiled Code))
at oracle.jdbc.driver.OracleStatement.expandSqlEscapes(OracleStatement.java(Inlined Compiled Code))
at oracle.jdbc.driver.OracleStatement.parseSqlKind(OracleStatement.java(Inlined Compiled Code))
at oracle.jdbc.driver.OraclePreparedStatement.<init>(OraclePreparedStatement.java(Compiled Code))
at oracle.jdbc.driver.OracleCallableStatement.<init>(OracleCallableStatement.java(Inlined Compiled Code))
at oracle.jdbc.driver.OracleCallableStatement.<init>(OracleCallableStatement.java(Inlined Compiled Code))
at oracle.jdbc.driver.OracleConnection.privatePrepareCall(OracleConnection.java(Compiled Code))
at oracle.jdbc.driver.OracleConnection.prepareCall(OracleConnection.java(Compiled Code))
at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:168)
at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:127)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:208)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)
[6/20/07 10:22:07 AM] [3039:RT654539] Completed post-processing actions for request 654539.
END Of OPP Log Details
Regards,
Aanta
Message was edited by:
user526601HI ,
i am also facing the same problem but i have one solution for this .... that opp err
comes in 3 cases ....
data output will be very large
unable to insert data in template---->template design is wrong.....(in caseif xml is generated for that).
the third case is that the data defination file is perfectly fine but when it have to insert data in template its not getting the path where the template is put.
its all due to xml environment settings.
Tell your DBA to verify the issue...send him the log and opp log.
I expect that you will get what exactly the issues is.
regards
Ratnesh -
R12 XML Publisher reports shows output but with warning
R12 XML Publisher reports shows correct output in both PDF and EXCEL but with warning, this is making the business uneasy, can any one help me with this.
Please advise?Hi santark
Please check [this search|http://forums.oracle.com/forums/search.jspa?threadID=&q=%22OPP+Response+Timeout+to%22&objID=c84&dateRange=all&userID=&numResults=15] this topic discussed before
Regard
Helios -
Oracle Apps.XML reports ending with warning when the report output contains
Hi I have XML reports. When we run these reports as concurrent program through Oracle Apps. window and if the report output contains special characters(like Chineese data) in between of English, then the concurrent program is ending with warning. If we remove special characters then it is working fine or when we run the report query directly from backend it is working fine.
We are importing this data from legacy system into oracle apps. and we can't control these characters or decode them with some other charactes.
Can any one guide me how to get the XML report output with special characters.
Thanks in advance.
Chandra Babu Lankipalli.Hi Hussein,
The concurrent program is ending with Warning. It is unable to publish output file.
For the same when we remove special characters and run the program it is completing and generating the
output. The log fine is as follows when the data file contains special characters.
Custom Application: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXFA_AR_WIN_EXCEPTION module: XXFA AR Wintrack Customer Interface Exception Report
Current system time is 23-MAR-2009 05:33:19
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_CUST_ERRORED='3'
P_CUST_SUCCESS='0'
P_CUST_TOTAL='3'
P_REQUEST_ID='4661283'
P_USER_NAME='SYSADMIN'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
/d01/oracle/fadevora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /d01/oracle/fadevora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Report Builder: Release 6.0.8.25.0 - Production on Mon Mar 23 05:33:19 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 4661284 on node FAHQSNA01SFTD03 at 23-MAR-2009 05:33:20.
Post-processing of request 4661284 failed at 23-MAR-2009 05:33:21 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT -------------
Not printing the output of this request because post-processing failed.
Finished executing request completion options.
Concurrent request completed
Current system time is 23-MAR-2009 05:33:21
Thanks in advance.
Chandra -
Server connections not consistent. Folders grayed out with warning icon
For some reason, my mail.app has started showing grayed out folders and accounts with warning icons. Even though I am able to receive/send, mail seems to think the connection is not working. When I click on the icon, it reads "The server error encountered was: The attempt to read data from the server <"
I am using port 26 since my ISP blocks port 25, and I've been doing this with no problems for years...now all of a sudden it's become a problem.
Any suggestions would be appreciated. I already used keychain first aid, and that didn't seem to change anything.
My ISP recently went through a server migration which has caused me a lot of problems, which is when this started happening, but they can't seem to solve the issue on their end.
btw, this is happening on multiple computers (both listed below), and I also access my accounts through iPhone.
Thanks in advance.
-KenTo resolve this problem, follow these steps:
On the computer that is running System Center Operations Manager, open the Operations Console.
In the navigation pane, click Administration.
Expand Security, and then click Run As Profiles.
In the Run As Profiles view, double-click Data Warehouse Account.
In the Run As Profile Properties - Data Warehouse Account properties dialog box, click the Run As Accounts tab, and then click New.
In the Run As Account list, click Data Warehouse Action Account.
In the Name list, click the management server that generated the alert.
Click OK two times.
Follow steps 4 through 8 to assign the appropriate Run As account to the following profiles:
Data Warehouse Configuration Synchronization Reader Account
Data Warehouse Report Deployment Account
Data Warehouse SQL Server Authentication Account
For each profile, select the Run As account that matches the name of the Run As profile. For example, make the following assignments:
Assign the Data Warehouse Configuration Synchronization Reader Account to the Data Warehouse Configuration Synchronization Reader Account profile.
Assign the Data Warehouse Report Deployment Account to the Data Warehouse Report Deployment Account profile.
Assign the Data Warehouse SQL Server Authentication Account to the Data Warehouse SQL Server Authentication Account profile.
On the management server that generated the alert, restart the OpsMgr Health Service.
In the Operations Manager event log on the management server, verify that event ID 31554 events are logged.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical -
MFP M476dw poor color print quality with streaking
I bought this printer in January and only printed half a dozen or so color prints, but always has color streaks. I have printed may 200 B&W pages and they seem OK. I ran the calibration I found in the operator interface, but doesn't make any difference. See attached original image and scan of the color print. Yes the scan looks just like the color print. Color cartridges all show 80% full. B&W cartridge is 70%. scan of color print Original ImageWhat can I do to improve this? I really was expecting better color print quality.
Dale007 wrote:
I am experiencing horrible print quality with this printer. Colors are way off what they appear on the screen - reds appear yellow, browns appear blue / green. The printer has new HP ink cartridges, both basic and advanced inkjet cartridge cleaning processes have been run and the inkjet alignment process has been run. What can be done to correct this problem? -
ESS/MSS business packages "Deployed with Warning"
Hello All,
We are on NW04s SP10 on MS SQL server and Windows server. The Database and portal installations or on different machines. I installed the business packages ESS 1.0, MSS 1.0 and the XSS components - 600 using the JSPM.
After I deploy, I get the message<b> "Deployed with Warning"</b>
When I opened the log files and checked for errors, I found errors in deployment on these SDAs
sap.com/essfiaddr - WEBDYNPRO
sap.com/essinaddr - WEBDYNPRO
sap.com/essinpdata - WEBDYNPRO
sap.com/mssexpdyn - WEBDYNPRO
sap.com/mssexpssa - WEBDYNPRO
sap.com/mssoprogeneraldescription - WEBDYNPRO
And I get the following exceptions for all the SDAs above.
<b>07/01/11 09:54:10 - sap.com/essfiaddr - WEBDYNPRO
07/01/11 09:54:10 - ***********************************************************
Jan 11, 2007 9:54:11 AM Info: End of log messages of the target system.
Jan 11, 2007 9:54:11 AM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jan 11, 2007 9:54:11 AM Warning: Finished with warnings: development component 'ess/fi/addr'/'sap.com'/'MAIN_ERP05PAT_C'/'795293':
Caught exception during application startup from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Error occurred while starting application sap.com/ess/fi/addr and wait.
Reason: Clusterwide exception: server ID 11376250:com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to prepare application ''sap.com/essfiaddr'' for startup. Reason=
Clusterwide exception: Failed to start application ''sap.com/essfiaddr'': The referenced application ''sap.com/ess~per'' can''t be started. Check the causing exception for details. Hint: Is the referenced application deployed correctly on the server?
at com.sap.engine.services.webdynpro.WebDynproContainer.prepareStart(WebDynproContainer.java:1490)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:231)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:301)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:317)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:111)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:227)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4684)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4589)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4562)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)</b>
Now, after this, when I log into the portal and see the MSS role, the links are all missing. I see only Overview and its worksets and pages and Reports and its worksets. Everything else is missing. The warning that I see is<b> "Linked object is unavailable"</b>
Could anyone please suggest me what could be wrong?
Thanks,
Sunitha<b></b>Hi Sunitha,
First of all I was not able to find if your backend is ERP 2004 or ERP 2005. It should be ERP 2005 if you want to user ESS 1.0 and MSS 1.0 BP
Please check in Content Administrator if you can locate these applications and test the same. If yes then you can ignore this warning. If No, in that case you have to redeploy XSS, ESS and MSS using SDM again.
The links in portal comes from your backend Area Page Customizing. To verify if the problem is with your Portal Business Package or with your backend customizing run your ESS applications using
http://<portal>:<port>/webdynpro/dispatcher/sap.com/pcui_gp~xssutils/XssMenuArea?sap.xss.menuhdr=SAPDEFAULT&sap.xss.menuargrp=SAPDEFAULTESS
and MSS using
http://<portal>:<port>/webdynpro/dispatcher/sap.com/pcui_gp~xssutils/XssMenuArea?sap.xss.menuhdr=SAPDEFAULT&sap.xss.menuargrp=SAPDEFAULTMSS
If you can see all the links correctly here, your backend customization is fine and there is a problem with your BP of ESS and MSS. So you will have to import the same again in the portal. However if you are not able to view the links in the page, then there is a problem with you Area Page Customization. You will need to check your config with the Client 000 configuration to find out the missing config.
Hope this helps.
Regards,
Shubham -
Mailbox Move from 2010 to 2013 Completed with Warning and Stuck
I have been moving mailboxes from Exchange 2010 to Exchange 2013 and was on my last batch when all the mailboxes Completed except for one which Completed With Warning. It shows 0 bad items.
In Exchange 2010, all the mailboxes that are part of this failed batch show they are still in the Move Request state.
On the mailbox in Exchange 2013 Migration that shows Completed with Warning, the following details are provided:
Error:
MigrationPermanentException: Warning: Target mailbox unlock operation was not replicated. If a lossy failover occurs after the target mailbox was unlocked, the target mailbox could remain inaccessible. Error details: The process failed to get the correct
properties. --> MapiExceptionTimeout: Unable to get properties on object. (hr=0x80040401, ec=-2147220479) Diagnostic context: Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=342] Lid: 43559
EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x80040401][length=178][latency=60009] Lid: 32881 StoreEc: 0x80040401 Lid: 50035 Lid: 64625 StoreEc: 0x80040401
Lid: 52176 ClientVersion: 15.0.847.32 Lid: 50032 ServerVersion: 15.0.847.6032 Lid: 50128 Lid: 1494 ---- Remote Context Beg ----
Lid: 43632 StoreEc: 0x80040401 Lid: 42272 StoreEc: 0x80040401 Lid: 36392 dwParam: 0x1 Lid: 50904 StoreEc: 0x80040401 Lid: 35992
StoreEc: 0x80040401 Lid: 1750 ---- Remote Context End ---- Lid: 1494 ---- Remote Context Beg ---- Lid: 43632 StoreEc: 0x80040401
Lid: 42272 StoreEc: 0x80040401 Lid: 36392 dwParam: 0x1 Lid: 50904 StoreEc: 0x80040401 Lid: 35992 StoreEc: 0x80040401 Lid: 1750
---- Remote Context End ---- Lid: 50288 Lid: 23354 StoreEc: 0x80040401 Lid: 25913 Lid: 21817 ROP Failure: 0x80040401
Lid: 20385 Lid: 28577 StoreEc: 0x80040401 Lid: 32001 Lid: 29953 StoreEc: 0x80040401 Lid: 62128 Lid: 38144
StoreEc: 0x80040401
Report:
[email protected]
Any idea what steps to take to complete this move from here?
Thanks,
Brett Gibson
Brett GibsonFrom the EMC on the Exchange 2013 (destination) I get:
DisplayName StatusDetail TotalMailboxSize
TotalArchiveSize PercentComple
Jason Osborne Completed 6.029 GB (6,474,008,69...
100
Brent R. Holl Completed 4.102 GB (4,403,992,89...
100
Nathan Harsin Completed 3.321 GB (3,565,830,88...
100
Don Barrett Completed 11.1 GB (11,916,695,17...
100
Larry Michael Completed 3.705 GB (3,978,717,79...
100
Danyl Gonterman Completed 4.165 GB (4,471,791,08...
100
Jason Mullanix Completed 1.569 GB (1,684,906,68...
100
Eric Brown Completed 5.662 GB (6,079,329,50...
100
Nick Cacciola Completed 1.992 GB (2,139,080,78...
100
Dorothy M. Jones Completed 11.34 GB (12,181,530,1...
100
orders Completed 3.632 GB (3,899,673,39...
100
Terrie Bumpus Completed 14.2 GB (15,249,956,21...
100
Sean Stepp Completed 2.55 GB (2,738,494,989...
100
Joshua Stolberg Completed 3.055 GB (3,280,581,92...
100
Josh Stremme Completed 2.571 GB (2,761,019,42...
100
Casey Jones Completed 1.614 GB (1,732,737,86...
100
Larry Gray Completed 2.545 GB (2,732,725,42...
100
Kelly Gray Completed 1.91 GB (2,050,883,915...
100
Bill Daugherty Completed 5.993 GB (6,434,784,87...
100
Laura Billstrom Completed 1.343 GB (1,442,466,39...
100
Adam Yates Completed 1.14 GB (1,224,119,328...
100
Eli Malooley Completed 606.8 MB (636,282,187 ...
100
Chad Ayers Completed 1.213 GB (1,302,645,29...
100
Nick Galvin Completed 815.9 MB (855,568,875 ...
100
Stephane Martin Completed 556.4 MB (583,443,766 ...
100
Todd Neal Completed 222.5 MB (233,256,684 ...
100
Eric Botsford Completed 17.13 MB (17,962,734 b...
100
Archiving CompletedWithWarnings 138.6 GB (148,830,505,...
100
Running the same command on the source Exchange 2010 Server I get the following:
[PS] C:\Windows\system32>Get-MoveRequest |Get-MoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (0:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (1:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (2:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : F4AB2B5B,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (3:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (4:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (5:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (6:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (7:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (8:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (9:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (10:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (11:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (12:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (13:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (14:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (15:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (16:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (17:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (18:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (19:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (20:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (21:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (22:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (23:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (24:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (25:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 903CB5C9,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (26:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Failed to communicate with the mailbox database.
+ CategoryInfo : ResourceUnavailable: (27:Int32) [Get-MoveRequestStatistics], AccessDeniedException
+ FullyQualifiedErrorId : 8E8584BB,Microsoft.Exchange.Management.RecipientTasks.GetMoveRequestStatistics
Thanks,
Brett
Brett Gibson -
Hi
We are looking for a software which converts SWF to MP4, we found many software which does the job but issue is file size is not optimize.
We found Adobe captivate 6 which gives optimum quality with good output but thing is we do not have batch process in captivate 6. so we request you to create a plugin or give a best option which have batch render quality and optimize in file size,Captivate is e-learning development software not a dedicated video convertor, you are better off trying something like Adobe Media Encoder or Super.
-
Check DB finished with warning
Dear all,
Check DB finished with warning from DB13,
kindly check the detail log .
BR0969I Checking database administration...
BR0970W Database administration alert - level: WARNING, type: CRITICAL_TABLESPACE, object: PSAPSR3, value: (max_extn of 5 files on disk 3342337) 34959360 KB (> 28188060 KB)
BR0970W Database administration alert - level: WARNING, type: CRITICAL_TABLESPACE, object: PSAPSR3, value: (max_extn of 5 files on disk 3342338) 32747520 KB (> 26471824 KB)
BR0970W Database administration alert - level: WARNING, type: CRITICAL_TABLESPACE, object: PSAPSR3, value: (max_extn of 5 files on disk 3342339) 33157120 KB (> 17786284 KB)
BR0970W Database administration alert - level: WARNING, type: CRITICAL_TABLESPACE, object: PSAPSR3, value: (max_extn of 5 files on disk 3342340) 34304000 KB (> 24094204 KB)
BR0970W Database administration alert - level: WARNING, type: CRITICAL_TABLESPACE, object: PSAPSR3700, value: (max_extn of 4 files on disk 3342339) 24125440 KB (> 17786284 KB)
BR0970W Database administration alert - level: WARNING, type: CRITICAL_TABLESPACE, object: PSAPSR3700, value: (max_extn of 5 files on disk 3342340) 29286400 KB (> 24094204 KB)
BR0970W Database administration alert - level: ERROR, type: MISSING_INDEX, object: (table) SAPSR3.ZBIMIS
BR0970W Database administration alert - level: ERROR, type: MISSING_STATISTICS, object: (table) SAPSR3.ZHDFCLOG
BR0970W Database administration alert - level: ERROR, type: MISSING_STATISTICS, object: (table) SAPSR3.ZHDFCLOG1
BR0970W Database administration alert - level: ERROR, type: MISSING_STATISTICS, object: (table) SAPSR3.ZHDFCMAP
BR0970W Database administration alert - level: ERROR, type: MISSING_STATISTICS, object: (index) SAPSR3.ZHDFCLOG~0
BR0970W Database administration alert - level: ERROR, type: MISSING_STATISTICS, object: (index) SAPSR3.ZHDFCLOG1~0
BR0970W Database administration alert - level: ERROR, type: MISSING_STATISTICS, object: (index) SAPSR3.ZHDFCMAP~0
BR0280I BRCONNECT time stamp: 2010-03-12 01.04.29
BR0972I Checking database operations...
BR0280I BRCONNECT time stamp: 2010-03-12 01.04.29
BR0974I Checking database messages in /oracle/IRP/saptrace/background/alert_IRP.log ...
BR0280I BRCONNECT time stamp: 2010-03-12 01.04.31
BR0977I Checking database profile...
BR0978W Database profile alert - level: WARNING, parameter: LOG_BUFFER, value: 14251008 (>< 4096,512 KB)
BR0978W Database profile alert - level: WARNING, parameter: OPTIMIZER_FEATURES_ENABLE, value: 10.2.0.1 (set in parameter file)
BR0978W Database profile alert - level: WARNING, parameter: PARALLEL_EXECUTION_MESSAGE_SIZE, value: 2152 (>< 16384,4096)
BR0978W Database profile alert - level: ERROR, parameter: QUERY_REWRITE_ENABLED, value: TRUE (<> FALSE)
BR0978W Database profile alert - level: ERROR, parameter: REPLICATION_DEPENDENCY_TRACKING, value: TRUE (<> FALSE)
BR0978W Database profile alert - level: WARNING, parameter: STAR_TRANSFORMATION_ENABLED, value: FALSE (<> TRUE)
BR0978W Database profile alert - level: WARNING, parameter: STATISTICS_LEVEL, value: TYPICAL (set in parameter file)
BR0280I BRCONNECT time stamp: 2010-03-12 01.04.31
BR0980I Number of changed database profile parameters: 0
BR0280I BRCONNECT time stamp: 2010-03-12 01.04.32
Kindly suggest
RegardsHI
Go to DB20 , Enter the table name ( which are coming in warning) , Press "Refresh" button . You will see
"Old number" and "New Number" are different for those table. Simply click on "Create Statistics" button.
Once you create stats for all the tables shown in warning, run your DB Check job once again.
You have lots of other warning...do some google...you will get most of the information for those warning. Some good links are below
http://download.oracle.com/docs/cd/B12037_01/server.101/b10755/initparams143.htm
http://skywheel.sarang.net/docs/Oracle/10g/server.101/b10755/initparams168.htm
http://youngcow.net/doc/oracle10g/server.102/b14237/initparams209.htm
Regards
Anindya
Edited by: Anindya Bose on Mar 12, 2010 12:35 PM
Maybe you are looking for
-
Looking for a particular color correction tutorial
I am looking for an online tutorial on how to do color correction if the video one is working with has color bars. This happens on a lot of analog videotapes that come to me. I know what my scopes are suppposed to look like when analyzing color bar
-
SELECTing from multiple rows and different tables
Basically, I have a table with a primary key and some other columns of data. The second table has a foreign key that points to the first table then has a columns with related data. I want to write construct a SQL query where one of the columns is the
-
Object Type and Bulk Collect/Forall
How can I bulk collect into (and read from) a collection which is a table of an object type such as CREATE TABLE base_table ( attr1 NUMBER, attr2 NUMBER, attr3 NUMBER, attr4 NUMBER); CREATE OR REPLACE TYPE rec_t IS OBJECT ( a
-
Drag a rect to zoom in with my chart
Hi, all I am doing a line chart now and my requirement is that user can use mouse to drag a rectangle on my chart to zoom in that specific area. How can I make it with Flex2.0? Do I need to learn flash to do this?
-
Hi there I am Using taxis database for text searching but I am getting an error.. When I am using the query like this � StrSQL = "SELECT SUM($rank) AS RANK, COUNT(CATEGORY_PATH) AS DCOUNT, HRDIVID, MAX(DIVISION_NAME) DIVNAME, MAX(DIVISION_ID) DIVID "