Photobooth live preview gives No-Signal (Canon EOS 70D)

I have a Canon 70D which is being used as a Photobooth. There is no software used. The Camera is connected to a LCD via HDMI for live view and the photos are clicked using a remote.
The connection is good over HDMI and the photos are being clicked too. The problem is loss of HDMI signal. After clicking 5-6 photos, the LCD signal goes off and comes back only if the photo is clicked again or if we press the live preview switch on the camera. Sometimes, the signal looses after single shot also.
I have checked the quality of the HDMI cable and it is very good. The camera and LCD are connected by Adapters and no battery is being used, so there is no chance of power being turned off.
Please let me know what is the solution for this.
Thanks,
Girish

Thanks for your EOS-70D camera info and videos. When is the camera available in North America?

Similar Messages

Aperture 3, Canon EOS 70D , 2 camera.

Hi,
I am completely newbie to Aperture..
The setup I am looking for is
1) Aperture 3
2) two units of Canon EOS 70D
3) One MacbookPro
Can I trigger and contol both the EOS 70D using one macbookpro using Aperture 3? like, 2 simultaneous live view, two capture together etc?
My primary purpose is to use it for Book scanning machine.. any help / advise highly appreciated.
Regards,
Divakar

You're asking about tethered shooting right? If so then you can't do what you described with Aperture.
First you can only conect one camera and second Aperture's tethered shooting does not provide a live view. You shoot with the camera and the image is imported into Aperture.
regards

Photoshop, Bridge, CS4 Lightroom 4 don't recognize CR2 raw picture from new camera Canon eos 70d -

I just received purchased a new Canon EOS 70D and my Adobe Master Creative Suite CS4 and Photoshop Lightroom 4 do not recognize the image format. Error message I get is "Could not complete your request because Photoshop does not recognize this type of file." Working on a MAC.
Thanks,

http://blogs.adobe.com/crawlspace/2011/03/why-doesnt-my-version-of-photoshop-or-lightroom- support-my-camera.html
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

I am unable to download my picture from my camera canon eos 70d to my computer.

I AM UNABLE TO DOWNLOAD MY PICTURE FROM CAMERA CANON EOS 70D TO MY COMPUTER. I HAVE INSTALL THE SOFTWARE FROM CANON EOS SOLUTION DISK 28.2.

"...The question then came up whether repeated removal/insertion of the card (in the computer and camera) might eventually wear out the contacts on the card, or worse the camera..."
Yes, there will be wear and tear over time. It also is possible to force a card into the slot crooked and damage the socket.
Are these much of an issue?
In my opinion, no. I change memory cards fairly frequently (mostly Compact Flash, which are probably the most easily damaged), sometimes use 12 or 15 memory cards in a day's shoot and have been doing that shooting digitally for ten years... And have never had even one card wear out or managed to damage a card or socket myself.
Note: I have pulled a card out too quickly, while it was still writing, and lost about 1/3 of the images on the card... Once! I also have had one "bad card" right from new, from a major manufacturer. Three other identical cards are working fine.
I do have one older DSLR with a "bent pin" in the Compact Flash socket.... But I bought it that way for $15 in hopes of fixing it. Unfortunately I think the particular pin that got bent managed to short out some of the other electronics in the camera, so it's probably not practical to fix (makes a nice paperweight). I've seen other cameras, particularly those using Compact Flash memory, with bent pins. Some were pretty easily fixed. Others needed a new socket or more.
Just looking at the posts on various discussion forums, I suspect it's a much more frequent issue for the USB cable or the USB socket in the camera to wear or get damaged. Plus camera batteries are only good for a certain number of charge/discharge cycles (I've heard 400X is typical, but don't really know).
So personally I'd be more concerned about directly linking the camera with the USB cable and leaving the camera powered on while downloading.... Feel better just pulling the memory card and using a card reader.
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM

I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

You could try using the DNG converter 8.7 on Windows vista:
<Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7>
<Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7>
You then need to watch this video to get hang of it:
<Camera Raw: How to use Adobe DNG Converter - YouTube>
Hope this helps.

Lightroom 5.2 vs. Canon EOS 70D RAW

Hello,
I am testing the trial version of Lightroom 5.2. My new camera is a Canon EOS 70D. When importing RAW files into Lightroom the colors of some photos are wrong. RAWs from my older 450D are fine.
For example on one photo the sky isn't blue but turquoise. When using the DNG Converter I get the same color. The sky was blue though. When opening the file in Digital Photo Professional by Canon, the sky is blue as it should be.
It happens on some other photos as well. Mostly if they have a high blue content. If in Lightroom I increase the blue content and decrease the shades it almost looks as it should.
The question now is: am I doing something wrong, do I need an update or additional plugins or is Lightroom simply interpreting the RAW wrong and will it be solved soon?
Cheers,
Sheepy

I managed to calibrate my monitors with a friend's hardware calibrator. The display of the photo in LR didn't change much. Still way too greenish sky.
Now I noticed that depending on the export option in LR (sRGB, aRGB, ProPhoto) I get pretty different colors in the exported JPEG files if I view them in IrfanView. None of them looks like the original that I see in LR. Funnily I noticed when writing this post that all exported images in the browser look the same - as each other and as in LR. looking at the LR-exports in LR they look the same - greenish sky. Looking at the LR-exports in DPP they look the same - blue sky. I managed to set IrfanView to enable color management with current monitor profile. Now I get the same view in LR, Irfanview and Firefox. I guess that's a plus. Furthermore I found an option in DPP to use the monitor profile - the sky looks a litlle green but there are differences to LR still.
LR sRGB
LR aRGB
LR ProPhoto
DPP aRGB with color management
Now that I managed to get the photos to look (almost) the same in all the applications that I use (FF, LR, IV being the most important) and having the monitors calibrated I can go back to my original question.
How comes that the sky looks so green although it wasn't when I shot the photo? Are there any more settings that I can make to get the colors on import better? Can I simply and with good conscience move my sliders now so that the image looks the way I like it and others will see it the same way (mainly on a website)?
Edit: Actually they only look green when writing the post. When looking at the finished post they look blue to me. Which is not what I saw in all my programs before. I am a little lost with how colors work I guess. I'd appreciate any hints.
Edit 2: When clicking on the images in this post they have the original color.

Importing *.CR2 files to Lightroom 3.6 - support of Canon EOS 70D

Hi,
try to import *.CR2 files from my new camera Canon EOS 70D to Lightroom 3.6, but it is not supporting format. What to do? Can anyone help me. Thanks a lot for your answers, yours Petr.

The DNG files are mainly supported by Adobe software. The CR2 files would be for any software that knows how to deal with 70D raw files and so the right answer for you depends on whether you feel you’ll want to use the raw data in other software or not, and what you feel you want decades from now if Adobe or Canon no longer exist. Personally, I’d just upgrade to LR 5.2 and not worry about DNGs, but I also already have compatible hardware so am not hit by having to upgrade my OS or hardware.

Photoshop CS5 and Canon EOS 70D : what about CR2?

the CR2 files of my new Canon EOS 70D are not accepted by CS5 and Camera Raw. I do not want to buy an upgrade to CS6 . How to do? Thanks

hi
you need to download adobe raw and dng converter.
Below is the link to the windows version
you need version 8.2 for your 70D
http://www.adobe.com/support/downloads/product.jsp?platform=Windows&product=106

Importer dans Lightroom 4.4 des images Raw CR2 du Canon EOS 70D?

Bonjour, comment puis je importer dans Lightroom 4.4 des images Raw CR2 prises avec mon Canon EOS 70D?
Actuellement je n'obtiens qu'un message qui me dit "Aperçu non disponible pour ce fichier. Je croyais qu'Adobe avait mis à jour Lightroom depuis aout 2013.
Dois je systématiquement convertir le format en DNG ou JPG ou bien dois je acheter Lightroom 5 ?
Merci par avance.

http://blogs.adobe.com/crawlspace/2011/03/why-doesnt-my-version-of-photoshop-or-lightroom- support-my-camera.html
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

Wann wird Adobe Camera RAW 6.7 die Canon EOS 70D unterstützen?

Wann wird Adobe Camera RAW 6.7 die Canon EOS 70D unterstützen?

Wie Mylenium schon geschrieben hat wird CameraRAW 6.7 die 70D nicht unterstützen.
Um weitere Ratschläge zu geben fehlen Infos welche Adobe-Versionen du einsetzt. Eigentlich erfolgt das Update von CameraRaw auf neuere Versionen automatisch. Wenn deine Version allerdiings schon etwas sehr alt ist, wirst du um eine kostenpflichtiges Update deiner Software nicht umhin kommen.
Eine Alternative wäre allerdings die Konvertierung deiner RAW-Dateien ins dng-Format.
Infos: http://www.adobe.com/products/photoshop/extend.displayTab2.html
Download: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5694
Axel

How open raw from canon eos 70D in elements 11

I cannot open raw from canon eos 70D in photoshop elements 11. Help me please.

Your PSE is too old—the camera was released after a newer version of software was available and Adobe only adds new camera support to the newest version of software.
Specifically, the 7D Mark II needs ACR 8.7 and PSE12 can only be updated to ACR 8.5.
Your choices are to:
Use the DNG Converter 8.7 or newer to create DNGs from the CR2s and those DNGs will open in the older version of ACR that comes with PSE12, OR
Buy the newer version of Element 13 that can be updated to a new enough Adobe Camera Raw plugin.
The DNG Converter is available from the Adobe Updates page:
http://www.adobe.com/downloads/updates
And the newer version of Elements is available from the Adobe Products page:
http://www.adobe.com/products/catalog/software.html
Another option would be to use Lightroom 5.7 or newer and use Edit in Photoshop Elements from LR once most of your raw adjustments are done, for any final touches in Elements.
For any of these choices you’d want to download the latest updates and run the software in trial mode to make sure your computer is compatible before paying anything.
BTW, I have the 7D Mark II and like it very much, having upgraded from an older Digital Rebel, but I’m not that thrilled with the in-camera JPG processing so always use Adobe products for raw development.

Lightroom 5.4 won't tether to Canon EOS 70D

Lightroom 5.4 won't tether to my Canon EOS 70D - Keeps flashing "no camera detected" to "Canon EOS 70D". So it must see the camera, but I can't access it. Adobe shows the 70D was supported in version 5.2. I can transfer images fine from the camera, but not tether it.

There are people waiting for tethering support for the slightly higher-end Nikon D610 for a similar amount of time. It’s almost as if Adobe postpones releasing tethering support until they are not busy with other things or there are enough new cameras to warrant the effort and then they catch up. I’m sure tethering is not easy to get to work, sometimes, and there is both PC and Macs to worry about.
Another issue, besides having to wait for the manufacturer to release their SDK which usually doesn’t happen for several months after a new camera is for sale, is that sometimes older models of cameras are dropped from support when newer models are added to the SDK, so perhaps Adobe also delays support for new cameras due to people, perhaps Adobe employees or internal beta testers, still using older ones. Or maybe it is a simple matter of priority and the number of people affected by bugs is more than the number of people affected by not tethering a particular model of camera.

Photoshop Elements 12 (PL) & Canon EOS 70D RAW problems

Photoshop Elements 12 (PL) & Canon EOS 70D RAW problems
Pomoc - uakltualnienia - brak dostępnych uaktualnień
wersja camera RAW - 8.0.0.137
not reading raw's from 70D

so, now after following the linked instructions...
1. I'v installed ACR 8.4 and it's opening the RAW files from 70D, but in camera profile I have "matrix"
in case with 60D RAWs ther was portrait, landscape, etc...
2. The step wit installing the DNG converter I download the DNG converter 7.4, 8.1, 8.2, 8.3. - the reason is to add in the system camera profile that I want
every one of them do not install - just nothing happen after doubleclick (!?)
only one that install and run it's 7.1 which dont support 70D RAW files....
it's amazing how to put all this to work propertly
any ideas?

PS Elements Camera RAW für Canon EOS 70d

Ich würde gerne wissen, wann das Plugin Camera Raw für die Canon EOS 70d in Photoshop Elements 10 zur Verfügung steht.

Versuch einmal das Plugin mit dem Suchbegriff "camera RAW" zu googeln und downlade die Installationsdatei. Das Plugin installiert sich dann von selbst in PSE, unter
C:Program Files\Adobe\Adobe DNG Converter.exe. Die Version ist auf dem Stand von Oktober 2013. Ich habe diesen Schritt heute morgen gemacht, weil ich mit meinem PSE10 die RAW Datei meiner neuen Nikon Kamera nicht bearbeiten konnte. Jetzt gehts!
Viel Erfolg
Lothar

Canon Flash 430EX 11 to go with my Canon EOS 70D camera with an 18-135mm lens.

I purchased a Canon Flash 430EX 11 to go with my Canon EOS 70D camera with an 18-135mm lens. The flash displays the icon confirming auto zoom only intermittenly and when it doesn't, twisting the camera zoom does not display on the flash screen. All batteries are charged and the flash is locked on to the camera.
Solved!
Go to Solution.

I'm not entirely certain I understand your question. The 430EX II has can be put in a mode where it automatically follows the camera zoom (within limits... 24mm to 105mm) but you can ALSO put it into a mode where you manually control the flash zoom. If it's in the manual control mode then it will not automatically zoom.
It is important that the "wide" panel NOT be in-use (if you pull out and flip down the wide-panel then the flash will go to wide angle and will not zoom EVEN if it was in auto mode.)
Press the Zoom button, then use the - / + buttons to change the zoom.
When under manual control there's a black "M" icon which will appear next the word "Zoom". If the "M" is not present then it's in auto zoom mode.
Lastly... when you change the zoom on the camera lens, typically nothing will happen on the flash UNTIL you wake the system by doing a half-press of the shutter button. When the camera wakes up to meter and focus... that's when it adjusts the zoom on the flash head.
Tim Campbell
5D II, 5D III, 60Da

Photobooth live preview gives No-Signal (Canon EOS 70D)

Similar Messages

Maybe you are looking for