Photobucket freezing firefox while loading

I am using FF 10.0.2
I am trying to load Photobucket.com but every time FF permanently freezes while loading Photobucket. I tried clearing cookies and cache. I tried running FF in safe mode.

I am using FF 10.0.2
I am trying to load Photobucket.com but every time FF permanently freezes while loading Photobucket. I tried clearing cookies and cache. I tried running FF in safe mode.

Similar Messages

  • Yeterday, firefox would freeze up while loading. Today, it won't even load.

    I have uninstalled it, re-downloaded it, restarted the computer, etc., etc., several times. Nothing works. I have te Windows Vista OS.

    I have uninstalled it, re-downloaded it, restarted the computer, etc., etc., several times. Nothing works. I have te Windows Vista OS.

  • Recently started running slow and freezing up while loading web pages etc.

    Problem description:
    Computer running slow and freezes up for a few minutes from time to time, I have owned it since 2011 with no issues until now.
    EtreCheck version: 2.1.2 (105)
    Report generated December 15, 2014 at 9:58:50 AM MST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.3 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 0:10:42
    Disk Information: ℹ️
      Hitachi HTS545032B9A302 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 318.84 GB (24.01 GB free)
      Core Storage: disk0s2 319.21 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
      /etc/launchd.conf - Exists
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Adware: ℹ️
      Geneio [Remove]
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.mice.driver.PS3Controller (1.0.0d1) [Support]
    Launch Agents: ℹ️
      [running] com.amazon.sendtokindle.launcher.plist [Support]
      [running] com.robohippo.HippoConnectAgent.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
      [not loaded] com.robohippo.HippoConnectDaemon.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.genieo.completer.download.plist Adware! [Remove]
      [loaded] com.genieo.completer.update.plist Adware! [Remove]
      [loaded] com.google.keystone.agent.plist [Support]
      [invalid?] com.nds.pcshow.plist [Support]
      [invalid?] com.nds.pcshow.uninstall.plist [Support]
    User Login Items: ℹ️
      iTunesHelper UNKNOWNHidden (missing value)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
      Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 [Support]
      Google Earth Web Plug-in: Version: 7.1 [Support]
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
    Safari Extensions: ℹ️
      Omnibar Adware! [Remove]
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          17% mds
          6% WindowServer
          0% AppleSpell
          0% fontd
          0% mds_stores
    Top Processes by Memory: ℹ️
      120 MB Safari
      77 MB mds_stores
      69 MB com.apple.WebKit.WebContent
      60 MB ocspd
      60 MB WindowServer
    Virtual Memory Information: ℹ️
      1.24 GB Free RAM
      1.15 GB Active RAM
      853 MB Inactive RAM
      1.05 GB Wired RAM
      1.00 GB Page-ins
      25 KB Page-outs
    Diagnostics Information: ℹ️
      Dec 15, 2014, 09:48:45 AM Self test - passed

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/\./ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • URL Freezes Page While Loading

    I have a 2011 Mac Book Pro 17" Retina OSX 10.9.4  purchased in 2012 that has worked beautifully until this past week.  I logged into FTDNA (Family Tree Maker DNA) research projects to do searches in various accounts.  All of the search functions worked fine with the exception of three items that require loading a large group of matches.  Each time I clicked on the Match Family Finder icon the URL would begin to almost load the page but then freeze without loading the page.  On occasion I received an error message that it was unable to connect to the server.  I tried logging into several accounts to see if it was a particular account but the page would not load in every case I clicked on the icon Matches or Known Relationships.  Nothing happens to the page itself such as blurry lines, etc., it freezes so the keyboard is also inoperable.  I have to use the touchpad to shut down the page. 
    I cleared the history and re-booted the computer several times but it has not changed the behavior of the computer which seems to search fine on all areas of various sites. 
    Any ideas about what may be wrong?
    Kind regards,
    The Rev. Dr. Cynthia Forde-Beatty
    Montgomery, Texas

    I failed to say that I am able to complete the same process on my PC and IPad so the problem is not the website but my Mac Book Pro's function.

  • Java applet freezes while loading on Firefox on Mac OS 10.9

    I am using Mac OS 10.9.4 with Firefox 32 and Java 7 update 67. The java applet freezes while loading for the first time. On double clicking, it loads successfully. Once the applet gets loaded then it loads successfully until the web-page is refreshed or cache is cleared. I don't see any error message or any errors in the java console logs. Any help on this issue, apart from the double click work around? Any permanent solution?

    This delay can also happen when Java has been unloaded from memory and needs to be reloaded from disk and (re)initialized.
    You may be tight on available (free) memory if this happens all the time.

  • Why firefox freezes every second momentarily while loading webpages?

    Firefox freezes momentarily every second while loading pages and it is not smooth like other browsers out there..I'm facing this problem at home, office, etc with every stable/beta/developer versions!!! I've did all sort of troubleshooting procedures like reset, deinstall/reinstall, safe mode, etc. I'm facing this issue since the time i'm using this browser. Till now i'm with the hope that this issue will be cleared in the updated version!! But not!!
    To be brief, Firefox is not smooth like other browsers! Try to give me a solution to fix this issue! Else pls give me a statement that firefox is not capable of loading pages smoothly like chrome, opera, etc.. I'll happily uninstall this and use other browsers!!

    Hello,
    The Refresh feature (called "Reset" in older Firefox versions) can fix many issues by restoring Firefox to its factory default state while saving your bookmarks, history, passwords, cookies, and other essential information.
    '''''Note:''' When you use this feature, you will lose any extensions, toolbar customizations, and some preferences.'' See the [[Refresh Firefox - reset add-ons and settings]] article for more information.
    To Refresh Firefox:
    # Open the Troubleshooting Information page using one of these methods:
    #*Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''. A new tab containing your troubleshooting information should open.
    #*If you're unable to access the Help menu, type '''about:support''' in your address bar to bring up the Troubleshooting Information page.
    #At the top right corner of the page, you should see a button that says "Refresh Firefox" ("Reset Firefox" in older Firefox versions). Click on it.
    #Firefox will close. After the refresh process is completed, Firefox will show a window with the information that is imported.
    #Click Finish and Firefox will reopen.
    Did this fix the problem? Please report back to us!
    Thank you.

  • When Firefox first loads, there is threatening script which quickly comes up and disappears, but I want to freeze and read it; but how?

    I am the victim of Identity Theft. The perpetrator has taken over as Roaming Administrator of my PC's. I once had 7 of them, but she has stolen/destroyed all but 2. She is taking online classes at college from Microsoft, and puts her class notes on one of the 2 surviving ones, which was returned to me by law enforcement. She has denied me access even to my "My Documents" subdirectory, &, in an ASUS AMD 8-core PC w/16GB of RAM, with a 3D blu-ray DVD reader/writer & 52-memory card reader/writer built in & a 2TB Western Digital eSATA HDD, all of which I designed & built, she has hidden the entire directory tree on the hard drive & rendered all of the other devices disabled so that the system is kaput; all because I was amassing evidence against her for law enforcement & the FTC.
    The question at-hand is how I screen-freeze Firefox as it is loading so that I can read the JavaScript she has written at the bottom of the banner. It is something about how she has accessed my Norton Identity Safe Vault, changed the password on me, & shut off & denied me access to my 2 Facebook accounts & others I am not quick enough to read. I need to screen-capture this message for law enforcement, because they STILL, after a year & losing a total of $223,000 from my bank account to her, don't have a case file with them! PLEASE CAN YOU HELP ME! Katrina has actually hired a hit-man whom we have captured on surveillance video trying to shoot me in the head! She has also hacked her way into my router, changed my password & disabled the reset capability of the router so that even my ISP can't reset it! Imagine what YOU could do with $223,000! I am elderly, broke, and have lost almost 250 pounds because of her! If I live long enough, I want to see her in federal prison. If I die, I want her to die by lethal injection in Washington State for First Degree Murder!
    FYI...I have used Firefox since its creation. The last time she wiped it off one of my systems & I reinstalled it, she caused it to install in Swedish. She has stolen the keys to all of my paid programs, & the companies now believe they actually belong to her, instead of myself. Norton 360 Premiere thinks I'm an intruder on my own machines, and Symanted has disabled my account, and will not communicate with me anymore. They gave her my Vault with more than 200 usernames and passwords! With GoDaddy, I had 17 non-profit SSL domains, for which I paid in excess of $8,000 to secure for 10 years with 21 email accounts. She obtained my SSN, impersonated me, demanded back the money I had paid, and they sent it to her. She stole the phone on which I had 2-step authentication, and now they won't let me near my accounts! I've had the same Gmail account for 8 years. Google opened up my password-secured YouTube account to 70,000+ strangers and pornography, and, after being LinkedIn's nominee for International Businesswoman of the Year, 2013, Google opened up my Wallet account to 2 other Identity Thieves to make purchases in my name, and they say I don't exist.
    Lastly, she has poisoned our indoor spa with bio-terroristic flesh-eating parasites in the form of hybridized, skin-burrowing arthropods that killed our dog, cats, and dozens of birds in our special-needs avian sanctuary. I barely survived an 8-day stay in the hospital in June in, in "grave condition with toxic encephalopathy" because the parasites are immune to all parasiticides, and had crossed my blood-brain barrier. My husband has heart attacks, strokes and seizures constantly from them. I can no longer walk.
    It is but one question I have asked, but your answer could be the key to stopping her from destroying what is left of our lives. With that JavaScripted message, she has cut me off from thousands of friends and family who have no idea what has happened to me. I live in a desolate, isolated corner of rural America without so much as phone or text service. All I have is the Internet and Firefox to keep me alive. If I can freeze that message and show it to the Whitman County Sheriff's Office, for whom I am the volunteer computer expert, they will accept their first-ever case of Identity Theft, and pursue her. It's bad enough that I lost the family fortune that my parents worked their whole lives to amass; I've lost my credibility, my self-esteem, and my will to live.
    If you can help me, I plan on writing a book about the whole traumatic experience so that innocent others won't have to suffer the devastating nightmares as we have. Ours has been called, by the experts who should know, the worst case of Identity Theft in the history of the crime.
    <sub>edit: removed identifiable personal information, since this is against our [[Forum rules and guidelines]] (philipp)</sub>

    Hi,
    Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
    Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
    Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
    In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through.

  • Firefox does not run smooth while loading websites.

    Firefox does not work smoothly when it is loading any webpage. Specially, when I open new tabs and load new websites while it is still loading last website in other tab, the situation becomes worse. Main problems that occur are - page will not scroll, or scrolling hangs for a sec or so, works a little bit and it happens repeatedly, new tabs will open but not smoothly, website loading also gets affected in similar way. The dot that revolves on tabs while loading any webpage gets really annoying. It revolves intermittently. Imagine a car engine not starting, it starts, stops, starts, stops. That's what happens with Firefox. But once all webpages are completely loaded and scrolled 2 or 3 times from top to bottom of the page, then it is all good. All the problems occur when page is still loading in fore- or background in any or all of the tabs. I tried to run Firefox with all add-on and plugins disabled, tried to refresh Firefox from troubleshoot information. But nothing helps. I even uninstalled and reinstalled Firefox. I guess my laptop is not having memory issues. I am using Windows 7 x64 based system. RAM is 4 GB. All other software work well. Most importantly, Chrome has no such issues in comparison to Firefox. Also, when IDM (internet download manager) takes over some downloads, the Firefox hangs for few seconds. Please help.
    Thank you.

    You can try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    You need to close and restart Firefox after toggling this setting.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window

  • Firefox crashes or freezes unexpected while watching/using flash contents

    Firefox crashes or freezes unexpected while watching/using flash contents. Particularly, when I need any flash content. It freezes up so that the only option will be to force quit the firefox.

    I've noticed the crashing increasing with the newer versions. The worst thing is when I'm writing a long email and then go to a page with flash and ff locks up and then crashes. I use IE now for most flash content or mission critical emailing but IE's interface is poorly laid out so I don't like it. I've tried FF with the plugin container and without it and it crashes either way (more often without the container). I use adblock and firebug. I wonder if ppl experiencing this prob are using those plugins too.

  • Firefox does not show url in navigation toolbar while loading webpage (in new tab)

    Firefox 3.6 when opening a link in new tab the url does not show in navigation toolbar while loading the web page. All ypu see is "Type a Web Adress" until the page load.
    Before with my older version the URL was visible in navigation toolbar even before page started loading. How can I get this back?

    A couple of possible causes. First check for an incompatible add-on, for details of how to do that see the [[troubleshooting extensions and themes]] article.
    Another possible cause is a problem with the file that stores bookmarks. One of the symptoms is the URL not being updated in the Location Bar as you browse. For details on this see [http://kb.mozillazine.org/Locked_or_damaged_places.sqlite locked or damaged places.sqlite].

  • Safari freezes while loading

    I am running Safari 4.03 on a G4 Mac with os x 10.4.11.
    About once a day, Safari will freeze while loading a page. The stop loading button does nothing. Eventually I have to force quit. Anyone know anything?

    I'm kinda a noobie to a mac so forgive me if this is lame. I was reading this post and i have kinda the same problem except when i go to open safari it just flashes and says that it can't be opened. I have reset safari and emptied the cache and it still won't open. Although sometimes when i go to open safari if i click on the top sites button in the far left corner when trying to open safari it will open that way and let me use safari to surf anywhere i propose to search. Any answers would be greatly appreciated. Thanks

  • Safari slower than Firefox - especially on 2 finger scrolls while loading..

    When I surf the web on my air I notice that Safari loads a page and will not let me 2 finger scroll until it has loaded enough or has the flash or java app all the way in... while Firefox will load a page faster and allow me to 2 finger scroll while its loading.... I notice this on pages that have flash banners or stuff on them... at first I thought it was the air being to slow so I tried firefox on the same pages and they load quicker and always allow me to 2 finger scroll..... Anyone else notice this ? I prefer to use Safari but I cant stand the stalling it does while loading certain pages with banner ads or too much flash/java...
    Basically until Safari's blue bar is gone you'll get 2 finger scroll stopage while Firefox will scroll... is firefox more optimized or something... ?

    Running OS 10.6.7 plus last Firefox before 4.0. Reluctant to move to 4.0 as it is still new.
    This is a new problem, beginning in the last month or so for me, I think. While it seems much longer, I believe the delay is about 20 seconds, and it does happen every time Firefox launches.
    Further, sometimes (do not yet see a pattern) well after launch, when attempting to navigate on a website...Firefox isn't paying attention. I think the interruption may be 20 seconds here, as well. Then all is well.
    No magic living color pinwheel displayed by uncle Mac during either delay.
    Did I mention table pounding frustration when on deadline?

  • IMac -Intel-freezes while loading.

    It all started today while it was unsually slow. I verified the disk permissions and it took for ever.
    I reset it abut it just freezed on the apple logo while loading. Any idea?

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • Logic freezes while loading Space Designer presets

    Logic freezes while loading Space Designer presets when I am working on my template and songs. If I create 1 track in a new empty project there is no problem with Space designer.

    And with Logic 8, I am stumped as to how to find all of my samples and virtual instruments that I used in Logic 7...Where is the "folder" that I drag my Sampler Folder alias into? Any clues?

  • Exception caught while loading menus.xml: TypeError: Access is denied. (IE), WORKS IN Firefox

    hi iam trying to get the data into spry table(Dr-cs3) from xml file and iam using spry xml dataset.  my application is working in every browser except in IE.
    ERROR IS :  
    Exception caught while loading menus.xml: TypeError: Access is denied.

    Hi
    this error is because of spryData.js, spryXapth.js generated by Dr CS3, I used Dr CS4 generated javascript files, then the same application is working.

Maybe you are looking for