PhotoCasting...a hint to get it working perhaps

I was getting that same error folks are mentioning - "could not communicate with .mac service after trying for 30 seconds..." or similar.
I decided, since I'd just started this, to try with the basic, basic setup. One album, one photo, smallest size possible. Same thing.
Next - open prefs, photocasting, stop photocasting all albums listed (even though they'd all claimed to fail!). This won't auto-refresh - close your prefs and open them again to make sure you don't have any listed.
Next - Start with the basics and build up - you can always add photos to an album later if you set it to autoupdate. One photo in one album. Worked for me so far...

You need to talk to vodafone about that
From the sound of it, you only have cell service and not data.
edit: looking at some other posts, there might be another issue other than you not having data service. that I have no clue.

Similar Messages

Problem to get 3d work on HP Compaq Business Desktop dx2000

I bought a brand new HP with linux - mandrake - a month ago. I installed mandrake but then I got so confused that I through it all away and started on again with Archlinux that I have become used to.
Everything (well, of course not everything but most :? ) works all right but a few things doesn't.
First I couldn't get CUPS to work properly but that I solved - but don't ask me how. I think I did the same things over 5 times and then suddenly it worked as it should.
Then I had problems with the sound - but that worsk now after following the wiki.
Then I had problems with playing CD and DVD but that I managed to get to work.
But now I am stuck.
The 3d doesn't work. I tried to install all 3d modules I could find in arch but no result. I tried through hwd -e and lokalsed the modules named there with no result. I even tried NVIDIA (the computer have a intel graphics on board and no Nvidia-card) with the result that now the CD can't play sound-CD and the DVD doesn't work for multimedia despite newest xine and mplayer, koffeine etc I installed.
So I have 3 major problems:
1) the 3d card I want to start working
2) the CD-rom should be able to play sound-CD
3) the DVD should be able to play dvd-films.
Some hard-data:
HP Compaq Business Desktop dx2000
Intel celeron with MMX technology 2.6 Ghz and 400 Mhz system bus
Integrated ADI AD1888 Audio
Integrated Intel extreme Graphics 2 with GDI/GDI+ and Direct Show controller
Graphics memory 16 Mb + extra through Intel Dynamic Video Memory. Complete OpenGL 1.3 support.
2 DVD-drives installed Toshiba Samsung
Any one that could giv me a hint on how to start the solving of this?

These modules I have loaded:
% lsmod
odule Size Used by
dummy 3460 0
ehci_hcd 35332 0
i810 86420 0
snd_pcm_oss 56612 0
snd_mixer_oss 21120 1 snd_pcm_oss
snd_intel8x0 34336 1
snd_ac97_codec 78176 1 snd_intel8x0
snd_pcm 101252 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 27140 1 snd_pcm
snd 59108 8 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 10848 1 snd
snd_page_alloc 10244 2 snd_intel8x0,snd_pcm
parport_pc 28996 1
lp 12296 0
parport 38600 2 parport_pc,lp
usb_storage 71232 0
uhci_hcd 34576 0
eepro100 30988 0
e100 36992 0
mii 5760 2 eepro100,e100
usbserial 31336 0
usbcore 125560 5 ehci_hcd,usb_storage,uhci_hcd,usbserial
when I try hwd -e this results come:
% hwd -e
HARDWARE DETECT ver 4.1.2
Starting... (expert mode)
Detecting pci, usb, and pcmcia devices.
PCI DEVICE
VendID DevID Module Description
8086 1050 "e100" "Intel Corp.|82801EB (ICH5) PRO/100 VE Ethernet Controller"
8086 1229 8086 1050 "eepro100" "Intel Corp.|EtherExpress PRO/100 S Server Adapter"
8086 244e "hw_random" "Intel Corp.|82820 815e (Camino 2) Chipset PCI"
8086 24d0 "i810-tco" "Intel Corp.|82801EB ISA Bridge (LPC)"
8086 24d2 "usb-uhci" "Intel Corp.|USB Controller"
8086 24d3 "i2c-i801" "Intel Corp.|82801EB SMBus"
8086 24d4 "usb-uhci" "Intel Corp.|USB Controller"
8086 24d5 "snd-intel8x0" "Intel Corp.|82801EB AC'97 Audio"
8086 24d7 "usb-uhci" "Intel Corp.|USB Controller"
8086 24db "ata_piix" "Intel Corp.|82801EB ICH5 IDE"
8086 24dd "ehci-hcd" "Intel Corp.|USB Enhanced Controller"
8086 24de "unknown" "Intel Corp.|82801EB USB EHCI Controller #2"
8086 2570 "intel-agp" "Intel Corp.|82865G [Springdale-G] Chipset HostBridge"
8086 2572 "Card:Intel 865" "Intel Corp.|865 Chipset Graphics Controller"
PCMCIA DEVICE
no pcmcia driver in /proc/devices
VendID DevID Module Description
USB DEVICE
VendID DevID Module Description
Press any key to continue...
HD PARITIONS
/dev/hda /dev/hda1 /dev/hda2 /dev/hda3 /dev/hdc /dev/hdd
MODULES
dummy ehci_hcd i810 snd_pcm_oss snd_mixer_oss snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd soundcore snd_page_alloc parport_pc lp parport usb_storage uhci_hcd eepro100 e100 mii usbserial usbcore
INFORMATION
hwd -s - generates howto and sample X configure.
% hwd - s
HARDWARE DETECT ver 4.1.2
Starting... : (simple mode)
Kernel : 2.6.10-ARCH
CPU & Cache: Processor 0 is Intel(R) Celeron(R) CPU 2.53GHz 2534MHz, 256 KB Cache
ALSA(sound): Intel Corp.|82801EB AC'97 Audio module: snd-intel8x0
Video : Intel Corp.|865 Chipset Graphics Controller server: Xorg (i810)
Monitor : MAX1b6c H:28.0-96.0kHz V:50.0-75.0Hz
Mouse : Generic PS/2 Wheel Mouse device: /dev/psaux
Hard Disk : SAMSUNG SP0411N device: /dev/hda
SCSI : No scsi disk
Swap : Swap found device: /dev/hda2
Scanner : No scanner
CDROM 1 : TSSTcorpDVD-ROM TS-H352A device: /dev/hdc
CDROM 2 : TSSTcorpDVD-ROM TS-H352A device: /dev/hdd
Floppy : 3.5 1.44MB floppy drive device: /dev/fd0
USB : USB found module: ehci-hcd
Ethernet : Intel Corp.|82801EB (ICH5) PRO/100 VE Ethernet Controller module: e100 device: eth0
PCMCIA : Detect PCMCIA cards run hwd -d
Modem : No pci modem
Howto : View howto run hwd -h
Testing : File /etc/X11/xorg.conf already exist!!
: Read more in howto.
in hwd - h the following part is about monitor:
XWindows:
Video Card : Intel Corp.|865 Chipset Graphics Controller
Monitor : MAX1b6c
H kHz : 28.0-96.0
V Hz : 50.0-75.0
Xserver : Xorg
Xmodule : i810
Mouse : Generic PS/2 Wheel Mouse at /dev/psaux module: msintellips
/2
anyone that can help me on?

[SOLVED] Unity-Overlay Scrollbar.. trying to get it working...

Hi,
I'm trying to enable the unity scrollbars inside XFCE.
I have installed the latest gtk2-ubuntu and gtk3-ubuntu, but run into problems.
When installing gtk2-ubuntu everything hangs and I cannot login to a XFCE session.
gtk3-ubuntu installs fine, but no overlay scrollbar is visible.
I have used the following PKGBUILD (mod from atanas - aur) to install gtk3-ubuntu:
pkgname=gtk3-ubuntu
pkgver=3.4.3
pkgrel=1
pkgdesc="GTK+ is a multi-platform toolkit (v3) with Ubuntu's modifications"
arch=('i686' 'x86_64')
url="http://www.gtk.org/"
install=gtk3.install
depends=('atk' 'cairo' 'gtk-update-icon-cache' 'libcups' 'libxcursor' 'libxinerama' 'libxrandr' 'libxi' 'libxcomposite' 'libxdamage' 'pango' 'shared-mime-info' 'colord')
makedepends=('gobject-introspection')
provides=("gtk3=$pkgver")
conflicts=('gtk3')
options=('!libtool' '!docs')
backup=(etc/gtk-3.0/settings.ini)
license=('LGPL')
source=(http://ftp.gnome.org/pub/gnome/sources/gtk+/3.4/gtk+-$pkgver.tar.xz
settings.ini
016_no_offscreen_widgets_grabbing.patch
017_no_offscreen_device_grabbing.patch
043_ubuntu_menu_proxy.patch
062_ubuntu-set-grab-add.patch
075_expose_gdkwidget_for_gtkrange.patch
sha256sums=('846010442a96590469cde16ed6a1fdfe09397e435165459f04d31cfa5713799f'
'c214d3dcdcadda3d642112287524ab3e526ad592b70895c9f3e3733c23701621'
'c4a43b254b9719ac026fa6a92366bdc1d32e42fa79461ff8aaa206933b9f9c7e'
'cb8f4eb9d10c6d8645d23812aaa7d64c14560476f19f8c779d10a546748de684'
'3c40814a3ba51dbbd169b5fc8f4a3c47aff6c5b97433a1f6c13fa66d465947d9'
'5a89bd63afb2d97b98eb3b7acb5a568c388aedd94af38a1106233ce033982354'
'9ee240b355502d6ba449983f794205e6e5401c8acca2a3ce513df7f0502dc988')
build() {
cd "$srcdir/gtk+-$pkgver"
# Don't let offscreen widget do grabbing (fix for ido)
patch -Np1 -i "$srcdir/016_no_offscreen_widgets_grabbing.patch"
# Do not allow widgets in an offscreen hierarchy to take grabs (fix for ido)
patch -Np1 -i "$srcdir/017_no_offscreen_device_grabbing.patch"
# Add Ubuntu menuproxy module (required for appmenu-gtk)
patch -Np1 -i "$srcdir/043_ubuntu_menu_proxy.patch"
# Add ubuntu-set-grab-add signal (required for ido)
patch -Np1 -i "$srcdir/062_ubuntu-set-grab-add.patch"
# Add gtk_range_get_event_window to get the event_window for a GtkRange (fix for ido)
patch -Np1 -i "$srcdir/075_expose_gdkwidget_for_gtkrange.patch"
# Add support for the ayatana overlay scrollbars (required for overlay-scrollbar)
#patch -Np1 -i "$srcdir/100_overlay_scrollbar_loading.patch"
# Partially revert BGO#673440 in order to fix BGO#674157
#patch -Np1 -i ../wacom.patch
aclocal -I m4
libtoolize --copy --force
automake
CXX=/bin/false ./configure --prefix=/usr \
--sysconfdir=/etc \
--localstatedir=/var \
--enable-gtk2-dependency \
--disable-schemas-compile
#https://bugzilla.gnome.org/show_bug.cgi?id=655517
sed -i -e 's/ -shared / -Wl,-O1,--as-needed\0/g' libtool
make
package() {
cd "$srcdir/gtk+-$pkgver"
make DESTDIR="$pkgdir" install
install -Dm644 "$srcdir/settings.ini" "$pkgdir/etc/gtk-3.0/settings.ini"
As you can see, I have removed some patches (scrollbar patch, etc.) otherwise it wont compile.
I don't know if the patches are required, as I thought they merged into the main source?
Could also someone help me with gtk2-ubuntu? I don't know why this is hanging.
I have not tried it in a non XFCE-session through.
Has someone been able to get it working? (Lower version perhaps?)
Thanks!
Last edited by beta990 (2012-06-28 09:56:30)

Oke, given up.. seems like they patch things different in gtk3.. thanks anyway.

How to get SAPRFC working on XAMPP 1.6.2? Try this.

Hi
I have just managed to get SAPRFC working with XAMPP 1.6.2 (released on 29/05/2007). I noticed there was not much information on XAMPP in the PHP Development forum, so thought this might be useful for anyone who may wish to use it.
I originally started with Craig Cmehil's post <a href="/people/sap.user72/blog/2005/05/15/getting-started-with-php started with PHP</a>. I already had XAMPP installed, so just needed to update it and add SAPRFC support.
I am using the following:
Windows XP SP2
XAMPP 1.6.2 - <a href="http://www.apachefriends.org/en/xampp-windows.html">http://www.apachefriends.org/en/xampp-windows.html</a>
This includes:
1. Apache 2.2.4
2. MySQL 5.0.41
3. PHP 5.2.2 + 4.4.7 + PEAR + Switch
4. And other modules included. See XAMPP website for more information on the extra modules included.
SAPRFC 1.4-5.20 - Re: PHP 5.2 and saprfc 1.4.1. This provided me with a link to SAPRFC 1.4-5.2.0. Using the php_saprfc.dll file included in this ZIP file solved the problem.
Instructions
1. Install XAMPP and follow setup taking defaults (I installed to C:\DEV\XAMPP)
2. Extract SAPRFC to a suitable location (e.g. C:\DEV\SAPRFC)
3. Copy the php_saprfc.dll file to the XAMPP\PHP\EXT folder (as defined in the extensions_dir in PHP.INI).
4. Copy the remainder of the SAPRFC ZIP file to the XAMPP\HTDOCS folder. Create subdirectory if required.
4. Edit PHP.INI and add the line extensions=php_saprfc.dll You will need to add this after the last extensions=<some_extension>.dll line.
5. Shutdown and restart Apache using the XAMPP Control.
6. Launch Internet Explorer and go to page http://localhost/saprfc_test.php or if you have put the SAPRFC PHP files in a subdirectory go to http://localhost/yoursubdirectory/saprfc_test.php.
7. By running the saprfc_test.php file you should see a logon page.
It should now be working on the PHP 5.2.2. I have not tested with the 4.4.7 version.
That's all you need to do, so you should now be able to test some of the examples that are in the Blogs.
Best of luck
Nick

Hello everybody,
I've found simple solution for all problems with "Generate Activation Context failed for ... php_saprfc.dll". This has something to do with missing libraries at your system.
The next trace in Event viewer -> System was:
"Dependent Assembly Microsoft.VC80.CRT could not be found and Last Error was The referenced assembly is not installed on your system.
The solution is install: Microsoft Visual C++ 2005 Redistributable Package (x86)
"vcredist_x86.exe" available at Microsoft downloads page.
Good luck
Michal.

HT5622 My apple I'd has been disabled. How do I get it working again.

My apple id has been disables. How do I get it working again?

Here's a knowledge base article that tells you what to do:
http://support.apple.com/kb/TS2446

[GUIDE] How to get MapleStory working in Arch Linux

MapleStory is a free-of-charge, 2D, side-scrolling massively multiplayer online role-playing game developed by the South Korean company Wizet. Several versions of the game are available for specific countries or regions, and each is published by various companies such as Wizet and Nexon. Although playing the game is free, character appearances and gameplay enhancements can be purchased from the "Cash Shop" using real money. MapleStory has a combined total of over 50 million subscriber accounts in all of its versions. MapleStory North America (Global), for players mainly in North America and outside of East Asia, Southeast Asia and Europe, has over three million players.
In the game, players travel the "Maple World", defeating monsters and developing their characters' skills and abilities as is typical in role-playing games. Players can interact with others in many ways, such as through chatting, trading, and playing minigames. Groups of players can band together in parties to hunt monsters and share the rewards. Players can also join a guild to interact more easily with each other.
I am an avid mapler myself, however, I am also an avid archer! For some time, I have wanted to get MapleStory working on Arch Linux in some way, but nothing seemed to work. As you might have guessed by now, recently, while playing around with VirtualBox, I discovered a method to get MapleStory working on it! Though in this method you won't actually have MapleStory running on Arch Linux, you'll have it running on a VirtualBox Windows virtual machine, that is still pretty good compared to other people's experiences.
I hope there are at least a few maplers on this forum, and if there aren't, I hope that someone will port this post over to other Linux, or even MapleStory, forums. Anyways, let's begin.
1. Download and install a version of Virtual Box that is version 3.0+. The reason for this is that, only versions 3.0+ support an experimental DirectX Driver with 3D acceleration that is required for MapleStory to run.
2. Create a Windows Virtual Machine, add a hard disk to it, and install and update Windows on it(preferably Windows XP, as it uses less resources than other contemporary Windows installations).
3. Once you have done all you needed and wanted on that Windows installation, restart it, boot it into safe mode by holding F8 at the boot, and wait until the desktop is fully loaded.
4. After you are at the desktop, go to "Devices" at the top of the menu of the Windows virtual machine, and select "Install Guest Additions...". Wait until Guest Additions finishes installing, and when VirtualBox asks you if you want to mount the disk containing the Guest Additions on the virtual machine, say "Yes".
5. Run the main executable on the disk that doesn't have amd64 or x86 following its name. Follow the instructions it gives you, and when it asks you what components to install, make sure both of the boxes it shows you are checked.
6. After the install is completed, the virtual machine will restart. After it restarts, shut it down.
7. Congratulations! You now have DirectX installed on your VirtualBox virtual machine! Now you need to activate the "3D Acceleration", that enables it.
8. In the VirtualBox main window, make sure you have your machine with Windows selected. Then, click on "Machine", and then "Settings...", at the top. A new window should pop up. On the left hand side, click on the display panel, and in the new settings section, tick Enable 3D Acceleration. Click "OK", to save the settings.
9. Start your Windows virtual machine, install MapleStory just as you would on a normal windows computer, and run MapleStory.
Notes: This way of running MapleStory is slower than by running it normally, on a normal windows computer. Also, try to not interact with your Linux desktop while playing MapleStory, because this can cause HackShield to shut down MapleStory, due to the fact that it believes there is a hacking attempt.
If any of you port this guide to any other place on the web, please, credit me, neovaysburd5.
For any further questions or inquiries, this goes to all of you, please contact me at [email protected].
Last edited by neovaysburd5 (2009-08-19 16:51:31)

Alright, I've posted it in the wiki. I don't know if it meets the Arch Linux wiki standards, so if there is absolutely anything wrong with it, please fix it right away. Don't even ask my permission.
http://wiki.archlinux.org/index.php/MapleStory

Can t get to work tint2 launcher

I'm a beginner in arch linux and i'm trying to figure out why the laucher don't show up in my panel,
i've set up the panel the way i want but i would like to have a few launcher
I've try serveral thing but i can't get it to work,
and chromium.desktop and gparted.desktop do exist in /usr/share/applications/
tks
Here my tint2rc
# TINT2 CONFIG FILE
# horizontal panel
# squared taskbars
# idirae config
# Background definitions
# ID 1
rounded = 0
border_width = 1
background_color = #808080 20
border_color = #ffffff 10
# ID 2 - task active
rounded = 0
border_width = 0
background_color = #feffff 0
border_color = #d8d8d8 0
# ID 3 - task
rounded = 0
border_width = 0
background_color = #F5F5DC 0
border_color = #000000 0
# ID 4
rounded = 0
border_width = 1
background_color = #888888 0
border_color = #ED2323 60
# ID 5 - taskbar
rounded = 0
border_width = 1
background_color = #feffff 10
border_color = #ffffff 10
# ID 6 - active taskbar
rounded = 0
border_width = 1
background_color = #feffff 30
border_color = #ffffff 30
# ID 7 - tooltip
rounded = 3
border_width = 0
background_color = #222222 90
border_color = #222222 90
# ID 8
rounded = 0
border_width = 1
background_color = #888888 20
border_color = #888888 20
# Panel
panel_monitor = all
panel_position = top left horizontal
panel_items = LTSBC
panel_size = 100% 32
panel_margin = 0 1
panel_padding = 3 3
panel_dock = 0
wm_menu = 1
panel_layer = bottom
panel_background_id = 1
# Panel Autohide
autohide = 0
autohide_show_timeout = 0.3
autohide_hide_timeout = 1.5
autohide_height = 6
strut_policy = follow_size
# Taskbar
taskbar_mode = multi_desktop
taskbar_padding = 5 2
taskbar_background_id = 5
taskbar_active_background_id = 6
taskbar_name = 1
taskbar_name_background_id = 0
taskbar_name_active_background_id = 0
taskbar_name_font = Crisp 12
taskbar_name_font_color = #ffffff 30
taskbar_name_active_font_color = #ffffff 50
# Tasks
urgent_nb_of_blink = 20
task_icon = 1
task_text = 0
task_centered = 1
task_maximum_size = 20 20
task_padding = 0 0
task_background_id = 3
task_active_background_id = 2
task_urgent_background_id = 4
task_iconified_background_id = 3
# Task Icons
task_icon_asb = 80 0 0
task_active_icon_asb = 100 0 0
task_urgent_icon_asb = 100 0 0
task_iconified_icon_asb = 80 0 0
# Fonts
task_font = BankGothic Md BT 10
task_font_color = #696969 60
task_active_font_color = #696969 100
task_urgent_font_color = #696969 100
task_iconified_font_color = #696969 60
font_shadow = 0
# Launcher
launcher_icon_theme = elementary
launcher_padding = 2 2
launcher_background_id = 1
launcher_icon_size = 20
# Specify icon theme names with launcher_icon_theme.
# if you have an XSETTINGS manager running (like xfsettingsd), tint2 will follow your current theme.
#launcher_icon_theme = AwOkenWhite
# Each launcher_item_app must be a full path to a .desktop file
launcher_item_app = /usr/share/applications/chromium.desktop
launcher_item_app = /usr/share/applications/gparted.desktop
# Clock
time1_timezone = :/usr/share/zoneinfo/dir/Canada/Eastern
time1_format = %I:%M %p
time1_font = BankGothic Md BT 9
#time2_format = %A, %B %d
#time2_font = Ubuntu-L 7
clock_font_color = #ffffff 80
clock_padding = 5 0
clock_background_id = 5
clock_lclick_command = gsimplecal
#lock_rclick_command =
# System Tray
systray = 1
systray_padding = 2
systray_sort = right2left
systray_background_id = 5
systray_icon_size = 20
systray_icon_asb = 100 0 0
# Tooltips
tooltip = 0
tooltip_padding = 2 2
tooltip_show_timeout = 0.0
tooltip_hide_timeout = 0.0
tooltip_background_id = 7
tooltip_font_color = #ff0000 100
tooltip_font = Roboto-Thin normal 9.0
# Mouse
mouse_middle = none
mouse_right = toggle
mouse_scroll_up = toggle
mouse_scroll_down = iconify
# Battery
battery = 1
battery_hide = never
battery_low_status = 10
battery_low_cmd = notify-send "battery low"
bat1_font = sans 8
bat2_font = sans 6
battery_font_color = #ffffff 80
battery_padding = 5 0
battery_background_id = 5
# End of config
Last edited by jolejo07 (2013-07-05 01:39:25)

I've try but can't get it working ether, i've download from Aur but when i'm trying to use the PKGBUILD with makepkg
it telling me
==> ERROR: Cannot find the fakeroot binary required for building as non-root user.
==> ERROR: Cannot find the strip binary required for object file stripping.
Last edited by jolejo07 (2013-07-05 01:45:21)

Can't get it working - just want to view another desktop on my home network

I need to be able to view (not control) the desktop of my PowerMac that is connected to my Zoom DSL modem in another room. I want to view that desktop from my MacBook Pro connected wirelessly to the modem.
The PowerMac is running Mac OS X 10.3.9.
The MacBook Pro is running Mac OS X 10.4.11.
On the Zoom modem I've turned on port forwarding for port 5900 (is this necessary?).
On the PowerMac I have turned on Apple Remote Desktop in the Sharing preferences, and opened port 5900. On the MacBook Pro I have installed Chicken of the VNC, but it can not connect to the PowerMac. I can login to the PowerMac and share files using Mac OS X, and I can successfully ping the PowerMac with Network Utility. But when I try to port scan the PowerMac the scan proceeds for several minutes without finding anything (scanning the range 5900-5910).
When I try to connect using CVNC the error is "Connection Refused:Conect()".
I'm working at the very edge of my understanding of networking here. I'm really not sure about how I've done things, and I have no idea how to troubleshoot this.
Any suggestions? Thanks!

Okay, I'm going to answer my own question. I needed to update my ARD client to 2.1 to get this working. Latest is 2.2 so I may try that next, but for now 2.1 is working fine.

I am trying to get NAT working on a Cisco 2801 with HWIC-4ESW.

I have a 2801 that had a failed Fe0/1 port. The Fe0/1 port was used to give sub-interface Fe0/0.200 access to internet. We installed a HWIC-4ESW into the 2801. I have successfully moved the sub-interfaces ( 0/0.1 , 0/0.100 , and 0/0.200 ) from the Fe0/0 to the HWIC-4ESW. I have reconfigured the Fe0/0 to connect to my ISP. However, I cannot get traffic from vlan200 to pass to the internet over Fe0/0. I have a guest wireless network set for vlan 200. Clients get an IP address in the appropriate range (192.168.200.0), but they cannot get to the internet. Below I have included the results of "sh ip int brief" and some of the "sh run". I think that it is something simple, but I canot get it working.
Help would be appreciated.
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 ***.**.244.194 YES manual up up
FastEthernet0/0.200 unassigned YES unset deleted down
Service-Engine0/0 192.168.100.254 YES TFTP up up
FastEthernet0/1 unassigned YES NVRAM administratively down down
FastEthernet0/1/0 unassigned YES unset up up
FastEthernet0/1/1 unassigned YES unset up up
FastEthernet0/1/2 unassigned YES unset administratively down down
FastEthernet0/1/3 unassigned YES unset administratively down down
Serial0/3/0:0 unassigned YES unset down down
Serial0/3/0:1 unassigned YES unset down down
Serial0/3/0:2 unassigned YES unset down down
Serial0/3/0:3 unassigned YES unset down down
Serial0/3/0:4 unassigned YES unset down down
Serial0/3/0:5 unassigned YES unset down down
Serial0/3/0:6 unassigned YES unset down down
Serial0/3/0:7 unassigned YES unset down down
Serial0/3/0:8 unassigned YES unset down down
Serial0/3/0:9 unassigned YES unset down down
Serial0/3/0:10 unassigned YES unset down down
Serial0/3/0:11 unassigned YES unset down down
Serial0/3/0:12 unassigned YES unset down down
Serial0/3/0:13 unassigned YES unset down down
Serial0/3/0:14 unassigned YES unset down down
Serial0/3/0:15 unassigned YES unset down down
Serial0/3/0:23 unassigned YES NVRAM up up
Vlan1 192.168.1.254 YES NVRAM up up
Vlan100 192.168.100.254 YES NVRAM up up
Vlan200 192.168.200.254 YES NVRAM up up
NVI0 ***.12.244.194 YES unset administratively down down
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.100.1 192.168.100.99
ip dhcp excluded-address 192.168.100.200 192.168.100.254
ip dhcp excluded-address 192.168.200.1 192.168.200.99
ip dhcp excluded-address 192.168.200.200 192.168.200.254
ip dhcp pool Phones
network 192.168.100.0 255.255.255.0
option 150 ip 192.168.100.254
default-router 192.168.100.254
dns-server 192.168.1.8
ip dhcp pool guestwireless
network 192.168.200.0 255.255.255.0
default-router 192.168.200.254
dns-server 8.8.8.8 8.8.4.4
ip cef
no ip domain lookup
ip domain name pwa.com
ip name-server 8.8.8.8
ip name-server 8.8.4.4
controller T1 0/3/0
pri-group timeslots 1-16,24
controller T1 0/3/1
shutdown
gw-accounting aaa
gw-accounting syslog
interface FastEthernet0/0
description Guestwireless route to internet
ip address ***.**.244.194 255.255.255.240
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
interface Service-Engine0/0
ip unnumbered Vlan100
service-module ip address 192.168.100.200 255.255.255.0
service-module ip default-gateway 192.168.100.254
no cdp enable
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface FastEthernet0/1/0
description trunk to switch
switchport mode trunk
duplex full
speed 100
interface FastEthernet0/1/1
description voice
switchport access vlan 100
interface FastEthernet0/1/2
shutdown
interface FastEthernet0/1/3
shutdown
interface Serial0/3/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
isdn supp-service name calling
no cdp enable
interface Vlan1
description Data
ip address 192.168.1.254 255.255.255.0
interface Vlan100
description voice vlan
ip address 192.168.100.254 255.255.255.0
h323-gateway voip bind srcaddr 192.168.100.254
interface Vlan200
description Guestwireless Data
ip address 192.168.200.254 255.255.255.0
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip http path flash:
ip nat inside source list 10 interface FastEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 192.168.1.1
ip route 192.168.100.200 255.255.255.255 Service-Engine0/0
ip route 192.168.200.0 255.255.255.0 FastEthernet0/0
ip radius source-interface Vlan100
access-list 10 permit 192.168.200.0 0.0.0.255

So, I just built this in the lab, and it seemed to work ok. I attached a sparse config, but it does let my host on the GuestWireless get the internet via NAT.
R2#sh ip nat translations vrf GuestWireless
Pro Inside global Inside local Outside local Outside global
icmp 17.12.244.194:5 192.168.200.1:5 1.1.1.1:5 1.1.1.1:5
R2#sh ip route vrf GuestWireless
Routing Table: GuestWireless
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is 17.12.244.195 to network 0.0.0.0
17.0.0.0/28 is subnetted, 1 subnets
C 17.12.244.192 is directly connected, FastEthernet0/0
C 192.168.200.0/24 is directly connected, Vlan200
S* 0.0.0.0/0 [1/0] via 17.12.244.195

Unable to get translation working with XML bursting

Hi All,
I am working on bursting an XML report using the DocumentProcessor API in an EBS environment. The XML publisher report has .xlf translation for Dutch Netherlands (nl-NL). The report works fine when printing through the EBS using the nl-NL locale. But however if I try to set the locale in the bursting and try to print the XML publisher report it is printing only in American English (Main translatable template's locale). Below is my bursting code
try {
DocumentProcessor dp = new DocumentProcessor("/usr/tmp/SampleControlFile2.xml", strDataSource, "/usr/tmp");
dp.registerListener(this); //Set the listener
System.out.println(strDataSource);
System.out.println("xdo://"+strAppcode+"."+strTemplateCode+"."+strLang+"."+strLocale+"?getSource=true");
Properties prop = new Properties(); //Add properties and variables//
//updating these property as per environment//
//prop.put("user-variable:TEMPLATE", "xdo://"+strAppcode+"."+strTemplateCode+"."+strLang+"."+strLocale+"?getSource=true");
prop.put("user-variable:TEMPLATE", "xdo://"+strAppcode+"."+strTemplateCode+"."+"en"+"."+"US"+"?getSource=true");
prop.put("user-variable:cp:territory", "NL");
prop.put("user-variable:cp:language", "nl");
prop.put("user-variable:cp:locale", "nl-NL");
prop.put("burstng-source", "EBS");
prop.put("user-variable.OA_MEDIA", "<MEDIA DIR>");
dp.setConfig(prop);
dp.process();
//dp.deletTemporaryOutputFiles();
} catch (Exception e) {
e.printStackTrace();
Control File:
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:globalData location="stream">
</xapi:globalData>
<xapi:request select="/TMP001/LIST_G_ORDER_BY/G_ORDER_BY/LIST_G_INVOICE/G_INVOICE">
<xapi:document key="${TRX_NUMBER}" output="${TRX_NUMBER}" output-type="pdf" delivery="file1">
<xapi:template type="rtf" locale="" location="${TEMPLATE}" translation="" filter="" />
</xapi:document>
</xapi:request>
</xapi:requestset>
Also I tried the following,
For xdo://XXRS.XXRS_RAXINV_SEL_T.en.US?getSource=true location, the template prints always in American English.
For xdo://XXRS.XXRS_RAXINV_SEL_T.nl.NL?getSource=true location, the bursting errors saying that could not find the template. (The template xdo://XXRS.XXRS_RAXINV_SEL_T.nl.NL?getSource=true can't be fetched)
Thanks!

Hi,
Can you post your control file here...
I am working on similar thing but not getting it working..getting error like
[070110_022931827][][EXCEPTION] The URL ( xdo://XXX.XXXPOXPRPOL.fr.CA/?getSource=true ) is invalid.
My translation file name is "XXXPOXPRPOL_fr_CA.xlf"
in my control file i have tried following codes but it didnt work
<xapi:template type="xsl-fo" location="xdo://XXX.XXXPOXPRPOL_fr_CA.fr.CA/?getSource=true" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !='' and POH_ORG_ID = 161]"></xapi:template>
<xapi:template type="xsl-fo" location="xdo://XXX.XXXPOXPRPOL.fr.CA/?getSource=true" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !='' and POH_ORG_ID = 161]"></xapi:template>
<xapi:template type="xsl-fo" location="xdo://XXX.XXXPOXPRPOL_fr_CA.xlf.fr.CA/?getSource=true" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !='' and POH_ORG_ID = 161]"></xapi:template>
Please let me know where problem is.
Thks & Rgds
Rajesh

I have 2 itunes accounts - one work a/c and one home a/c, but when i sign in at home only my home songs appear even if I sign in my work a/c. I have authorised both computers to show both a/cs. How can I get my work a/c songs to appear at home?

I have 2 itunes a/cs one at work and one at home. Both computers are authorised for the 2 a/cs, but I can;t get my work a/c songs to show on my home computer, even though I sign in my work a/c, and I can't get my home songs to show up on the work computer even though I sign in my home a/c. V. frustrating!

Hi,
You will have to manually copy your music. Get a pen-drive big enough to accommodate all your music. And follow these steps:
1. Create a new folder on the pen-drive.
2. Copy the music from your work computer to the folder you just created. It's in (yourhomefolder)>Music>iTunes>iTunes Media>Music if you're using a Mac, or in C:\Users\(yourusername)\Music\iTunes\iTunes Media\Music if you're using Windows.
3. Now on your home computer quit iTunes, and copy your music from work to the "Automatically Add to iTunes" folder in (yourhomefolder)>Music>iTunes>iTunes Media.
4. Start iTunes. It will automatically start to process the files and move them to the appropriate place.
Repeat these steps with your music from home on your work computer. Also I suggest to use only one iTunes account if possible.
Hope it helps
Regards,
Gábor

How can we get ADFSecurity work when used in OC4J, OID and OAM?

I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?

Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal

I had to reset my iPad to get it working and I lost all of my stored notes on the Notes app. I had Notes backed up in iCloud, but I do not know how to retrieve the backed up notes in iCloud to get them to be stored on my iPad again. What do I do?

I need help retreiving my notes from the Notes app in the iCLoud because I had to reset my iPad to get it working after i uploaded the latest version of IOS7. Can someone help me?

Hey ebe301,
Sorry to hear about your troubles with your PC. If you are not seeing your iPhone on your computer, then take a look at the link below to walk you through getting that working again. It will have you verify that drivers are installed and working as well as any third party software that may be causing conflicts.
iPhone, iPad, or iPod not recognized in iTunes for Windows
https://support.apple.com/en-us/HT204095
Take care,
-Norm G.

My iPhone will not work in landscape mode anymore, how do i get to work again

my iPhone will not work in landscape mode anymore, how do i get to work again??

Double click round home button then slide icon on the bottom of screen to so you go all the way to left. There you will see a square icon with a circle arrow . That is the screen rotation control button. Tap on that to lock/unlock screen rotatio

Since updating to 4.2, can no longer get my work email

Updated the iOS today and now my work email from the exchange server will not download. I get no notification. My AOL mail is still coming thru but I cannot get the work mails, which are the more important. Any ideas?

I strongly believe it must be something with iOS 4.2, since the people at my office that has not upgraded still can do it. That is both people with 3GS and iPhone4.
We are writing the exact same information when setting up the phones. Theirs just work and with iOS 4.2.1 its displays that "unable to verify account information".
I have tried both on 3G, Wifi at home and Wifi at the office.

PhotoCasting...a hint to get it working perhaps

Similar Messages

Maybe you are looking for