Photocasting - Limitations and a problem
First of all, I am hoping that someone would confirm for me my suspicions regarding photocasting with iPhoto 6 (since I can't seem to find any information published by Apple to this effect).
1. Photocasting stores photos on your .mac iDisk
2. Smart albums cannot be photocast.
3. The album cannot be bigger than the remaining capacity of your iDisk
In addition to these questions, I have an additional issue. I am trying to publish an iPhoto album containing 379 MB of photos. The computer in question is an iMac G5 20" running 10.4.4 and iPhoto 6. My iDisk has 430 MB of space left. If I am correct in my above assumptions, then it shouldn't be a problem. However, every single time I have tried to publish this photocast, I get the following error message:
"An error occurred while publishing the album. Request to .mac server failed after trying for 30 seconds."
I'm confused. The internet connection is good (cable connection running at least 4 Megs), and I can easily connect to my iDisk to see what's on it.
Can anyone help me troubleshoot?
First of all, I am hoping that someone would confirm
for me my suspicions regarding photocasting with
iPhoto 6 (since I can't seem to find any information
published by Apple to this effect).
1. Photocasting stores photos on your .mac iDisk
2. Smart albums cannot be photocast.
3. The album cannot be bigger than the remaining
capacity of your iDisk
In addition to these questions, I have an additional
issue. I am trying to publish an iPhoto album
containing 379 MB of photos. The computer in
question is an iMac G5 20" running 10.4.4 and iPhoto
6. My iDisk has 430 MB of space left. If I am
correct in my above assumptions, then it shouldn't be
a problem. However, every single time I have tried
to publish this photocast, I get the following error
message:
"An error occurred while publishing the album.
Request to .mac server failed after trying for 30
seconds."
I'm confused. The internet connection is good (cable
connection running at least 4 Megs), and I can easily
connect to my iDisk to see what's on it.
Can anyone help me troubleshoot?
I see there has been no activity on this since March 6th. I have the thirty second problem every time. I do not use energy saver or screensavers when I am working on-line. I have plenty of space in iDisk AND am trying to load a twenty picture album. Does anyone have a suggestion?
Similar Messages
-
Having read what I could from the related questions, the answers still elude me. This issue apparently is specific to Windows 8.1.
First, a little background.
1: The server is not on a domain, The system runs Server 2008-R2 standard with all folders shared across a standard "Workgroup" type network. They would prefer to
leave this layout intact.
2: The shared folders are nothing but Data files. There are no active system folders or anything used in an "active" environment. They are mostly Word doc, excel
files, pdf, txt, etc. However, due to the requirements of the software that needs to access these files, they Must
reside on a mapped network drive letter. Nothing else works due to the way the SQL database program stores the reference points back to the data.
I have had some success using what amounts to a “simulated” mapping using WebDAV to access the server. But access speed is a lot slower ad file size is limited.
3: The system has been configured as-is for the past 3 years with Users all on Windows 7 x64 (mixed OS, some Home Premium, some Professional) and the only problems that come up are when
access is through an ISP that blocks port 445. This was the original reason for finding a WebDAV/Cloud method just for those Users since they were unable to Map drives to anything on the Office Servers from their Home Internet even when using a VPN.
When Windows 8.0 became the only version available, I added a few users whose new laptops came with 8.0 from the vendors. While there were a very few minor problems, for all practical
purposes, I was still able to provide access to the mapped folders.
As the Windows 8.1 roll-out progressed, some users were successfully upgraded while others are still stuck in Windows 8.0. The issues with this seem to be hardware related and vary
depending on the Make and model of the laptop. I have been assured that eventually all of these will be able to advance to 8.1. But this delay has given me an excellent mixed OS environment for testing.
On the users who have not yet purchased new equipment and who are still using Windows 7. There has been no change. Their drive mapping is stable and they can always connect as usual.
Those blocked from lack of port 445 or still blocked. Systems inside the Office and those with ISP's who allow port 445 can use all mapped drives as normal.
Users who had Windows 8.0 and who have not yet been able to upgrade to 8.1 also have been unaffected. Same results as Windows 7.
Users who got the Windows 8.1 upgrade as well as those that came factory loaded with Windows 8.1 seem to be a never-ending list of problems. The ones that came native with 8.1 are worst
of all. The list of error codes runs through everything that has to do with “communication with the server”. As far as I have seen, this appears to be the issue.
Whether they are in the office on a wired network connection or at home on a Wi-Fi connection, the issues have the same results but the actual error codes may vary slightly. All of
them refer back to an inability to communicate with the server.
Nothing on the server has changed in any way. Users with Windows 7 continue to have zero problems, Users with Windows 8.0 seem to be doing fine as well. Only those with Windows
8.1 are affected and their problems are dramatic with everything from a total loss of drive mapping to misdirected data when the maps are active.
I have tried to make the drives automatically remap on reboot. I have tried registry modifications. I have done everything I can think of to make a difference but the results are the same
for every system using 8.1. The mapped drive letters invariably disappear. Sometimes while the system is in use ( I think I have been able to trace this to times when the system enters Sleep or Hibernate) but always when the system reboots.
One detail that might point to somewhere is that the "time to connect" when mapping the drive is so long that I believe some of the original failures were due to not waiting for a
minimum of 3 or 4 minutes to give time for the Shares to show-up in order to map them. Once the mapping is successful, the file access speed seems normal. But invariably, the drive becomes "unmapped" repeatedly each day.
I know this was a long question but I have tried to provide every possible detail for anyone who has experienced events like this who may already have a solution. I would even be glad
to purchase a 3rd party application if that is what it takes to get this to work. My next planned effort is to try using Server 2013 but I am afraid that might open another can of worms for those who still use Windows 7.
I have also been told that this is in some way related to the push to "Cloud" support in Windows 8.1 OS but I do not see where this would come in. I can say that this was the
one place where things continued to work as before. People who had Windows 8.1 and who had to use the CLOUD copies of our data are still able to connect to it with no problems.
Any suggestions appreciated. Preferably those that would not need extensive changes to the basic network structure. This "workgroup" consists of less than 25 users and any
extreme measures would be hard to justifyHi，
I sugget you try to ping server so that we can verify the connectivity.
Can windows 8.1 access Windows Server 2008R2?
Also,please check the event viewer to see if some error log appeared when the issue occurred.
Regards,
Kelvin Xu
TechNet Community Support -
Java Audio Metronome | Timing and Speed Problems
Hi all,
I’m starting to work on a music/metronome application in Java and I’m running into some problems with the timing and speed.
For testing purposes I’m trying to play two sine wave tones at the same time at regular intervals, but instead they play in sync for a few beats and then slightly out of sync for a few beats and then back in sync again for a few beats.
From researching good metronome programming, I found that Thread.sleep() is horrible for timing, so I completely avoided that and went with checking System.nanoTime() to determine when the sounds should play.
I’m using AudioSystem’s SourceDataLine for my audio player and I’m using a thread for each tone that constantly polls System.nanoTime() in order to determine when the sound should play. I create a new SourceDataLine and delete the previous one each time a sound plays, because the volume fluctuates if I leave the line open and keep playing sounds on the same line. I create the player before polling nanoTime() so that the player is already created and all it has to do is play the sound when it is time.
In theory this seemed like a good method for getting each sound to play on time, but it’s not working correctly.
At the moment this is just a simple test in Java, but my goal is to create my app on mobile devices (Android, iOS, Windows Phone, etc)...however my current method isn’t even keeping perfect time on a PC, so I’m worried that certain mobile devices with limited resources will have even more timing problems. I will also be adding more sounds to it to create more complex rhythms, so it needs to be able to handle multiple sounds going simultaneously without sounds lagging.
Another problem I’m having is that the max tempo is controlled by the length of the tone since the tones don’t overlap each other. I tried adding additional threads so that every tone that played would get its own thread...but that really screwed up the timing, so I took it out. I would like to have a way to overlap the previous sound to allow for much higher tempos.
I posted this question on StackOverflow where I got one reply and my response back explains why I went this direction instead of preloading a larger buffer (which is what they recommended). In short, I did try the buffer method first, but I want to also update a “beat counter” visual display and there was no way to know when the hardware was actually playing the sounds from the buffer. I mentioned that on StackOverflow and I also asked a couple more questions regarding the buffer method, but I haven’t received any more responses.
http://stackoverflow.com/questions/24110247/java-audio-metronome-timing-and-speed-problems
Any help getting these timing and speed issues straightened out would be greatly appreciated! Thanks.
Here is my code...
SoundTest.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
import java.io.*;
import javax.sound.sampled.*;
public class SoundTest implements ActionListener {
static SoundTest soundTest;
// ENABLE/DISABLE SOUNDS
boolean playSound1 = true;
boolean playSound2 = true;
JFrame mainFrame;
JPanel mainContent;
JPanel center;
JButton buttonPlay;
int sampleRate = 44100;
long startTime;
SourceDataLine line = null;
int tickLength;
boolean playing = false;
SoundElement sound01;
SoundElement sound02;
public static void main (String[] args) {
soundTest = new SoundTest();
SwingUtilities.invokeLater(new Runnable() { public void run() {
soundTest.gui_CreateAndShow();
public void gui_CreateAndShow() {
gui_FrameAndContentPanel();
gui_AddContent();
public void gui_FrameAndContentPanel() {
mainContent = new JPanel();
mainContent.setLayout(new BorderLayout());
mainContent.setPreferredSize(new Dimension(500,500));
mainContent.setOpaque(true);
mainFrame = new JFrame("Sound Test");
mainFrame.setContentPane(mainContent);
mainFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
mainFrame.pack();
mainFrame.setVisible(true);
public void gui_AddContent() {
JPanel center = new JPanel();
center.setOpaque(true);
buttonPlay = new JButton("PLAY / STOP");
buttonPlay.setActionCommand("play");
buttonPlay.addActionListener(this);
buttonPlay.setPreferredSize(new Dimension(200, 50));
center.add(buttonPlay);
mainContent.add(center, BorderLayout.CENTER);
public void actionPerformed(ActionEvent e) {
if (!playing) {
playing = true;
if (playSound1)
sound01 = new SoundElement(this, "Sound1", 800, 1);
if (playSound2)
sound02 = new SoundElement(this, "Sound2", 1200, 1);
startTime = System.nanoTime();
if (playSound1)
new Thread(sound01).start();
if (playSound2)
new Thread(sound02).start();
else {
playing = false;
SoundElement.java
import java.io.*;
import javax.sound.sampled.*;
public class SoundElement implements Runnable {
SoundTest soundTest;
// TEMPO CHANGE
// 750000000=80bpm | 300000000=200bpm | 200000000=300bpm
long nsDelay = 750000000;
long before;
long after;
long diff;
String name="";
int clickLength = 4100;
byte[] audioFile;
double clickFrequency;
double subdivision;
SourceDataLine line = null;
long audioFilePlay;
public SoundElement(SoundTest soundTestIn, String nameIn, double clickFrequencyIn, double subdivisionIn){
soundTest = soundTestIn;
name = nameIn;
clickFrequency = clickFrequencyIn;
subdivision = subdivisionIn;
generateAudioFile();
public void generateAudioFile(){
audioFile = new byte[clickLength * 2];
double temp;
short maxSample;
int p=0;
for (int i = 0; i < audioFile.length;){
temp = Math.sin(2 * Math.PI * p++ / (soundTest.sampleRate/clickFrequency));
maxSample = (short) (temp * Short.MAX_VALUE);
audioFile[i++] = (byte) (maxSample & 0x00ff);
audioFile[i++] = (byte) ((maxSample & 0xff00) >>> 8);
public void run() {
createPlayer();
audioFilePlay = soundTest.startTime + nsDelay;
while (soundTest.playing){
if (System.nanoTime() >= audioFilePlay){
play();
destroyPlayer();
createPlayer();
audioFilePlay += nsDelay;
try { destroyPlayer(); } catch (Exception e) { }
public void createPlayer(){
AudioFormat af = new AudioFormat(soundTest.sampleRate, 16, 1, true, false);
try {
line = AudioSystem.getSourceDataLine(af);
line.open(af);
line.start();
catch (Exception ex) { ex.printStackTrace(); }
public void play(){
line.write(audioFile, 0, audioFile.length);
public void destroyPlayer(){
line.drain();
line.close();Thanks but you have never posted reply s0lutions before ?? And F 4 is definitely not 10 times faster as stated before I upgraded !!
-
Caveman with club defeats ALL .mac and idisk problems!
Well, I'm pretty proud of myself. Like many others after upgrading to Leopard, had myriad .mac and idisk problems including, but not limited to: couldn't mount idisk on desktop, can't enable syncing of .mac on various computers, couldn't register a computer. I tried the log out, log in option in .mac. Also tried removing the syncservices folder from Home>Library>Application Support folder. I also tried reinstalling the system from a download of 10.5.1 udpate, repairing permissions, and every other trick I read about on the discussion forum. The ultimate solution for me? Open Keychain Access application in the Application>Utilities folder, show all the items and delete every item with '.mac' in it! Restarted computer, now idisk mounts fine, login to .mac works fine, and syncing works perfectly and I can register the previously unregisterable computer. While I have no logical explanation for this, because I don't understand enough about the Keychains to say why it worked, it clearly fixed the problem. Syncing has happened fine, using idisk is fine and all is well! Oh yes, I had a backup of my computer to an external drive before proceeding with my various interventions. Best of luck and don't be afraid to swing your caveman club wildly in the dark... you just might hit something worthwhile
I'm having exactly ONE of the problems Joshua lists here ... my iDisk will not mount to my desktop. All else works fine with my iDisk.
I don't see any responses to the original post. Help anyone? -
Audio (and other) problems noted with Keynote version 4.0.1
Since installing Keynote 4 and the 4.0.1 update, I have noted the following situations and/or problems:
1) When doing a "save-as" the filename is appended with the suffix ".key" but when I subsequently "save" this file, the suffix disappears. The file seems to open and operate OK nonetheless, but this puzzles and somewhat concerns me that someday Keynote may not recognize the file. This happens whenever I "save" a slideshow after I have made any changes to it.
2) When playing back a "soundtrack," the audio "glitches" frequently at slide transitions: this occurs repeatedly on my G5 desktop system but not on my MacBook Pro-17. The "glitches" always seem to occur at the same places in the track - which, of course, is also at the same slide transitions. (This problem has spawned several similar questions and threads in this forum.)
3) Related to #2 above, the "glitches" also interrupt or corrupt the "recording" of that soundtrack, so that the synchronization is off when the slideshow is played back.
4) If I want to have an audio track play under a series of slides, the only way I have found to accomplish this is to create a separate slideshow with the audio track running as a "soundtrack" and "record" the Builds and Transitions in sync with the audio. If I want to incorporate several of these shows together, I can create a "master" slideshow and Hyperlink each segment to the next. HOWEVER...
5) When I "record" a "soundtrack" and "synchronize" the Builds and Transitions within the slideshow, everything plays back properly in sync ONLY when the slideshow is played as a stand-alone presentation (i.e. a cold start from the desktop). If I initiate playback of the slideshow via a Hyperlink from another presentation, the soundtrack plays but NONE of the synchronization works at all.
6) The only way I have found to have an audio track "fade-in" or "fade-out" is to use off-line editing software to record these fades prior to importing the tracks into Keynote. The "Start Audio" Build function is simply a hard "cut" in, and the end of the track is a hard "cut" out.
These problems are consistent and repeatable facts. Whether they are "bugs" in the software or "design shortcomings" is uncertain. Nonethtless ...
At the risk of offending the moderators of this forum, I feel compelled to comment that these problems render the audio operations of Keynote less than satisfactory and should be addressed as soon as possible with another update to this visually stunning but audio-challenged application.Well Ron S, I re-confirmed why I prefer not to look to tech support for support.
It seems to me that support's main function is to deflect any critical comments and push the blame back to the user.
Frankly, I have better things to do with my time and money than try to help a multi-billion dollar enterprise learn about itself.
So, for the benefit of you and the nearly 400 who have followed this thread, I offer you my latest and probably last attempt to have Apple acknowledge in some small way that "Houston, we have a problem".
I expect this reply will result in this thread being yanked as well, since I'm expressing negative thoughts about Apple's product and wishing they would do better, which is a non-technical gasp of utter frustration and disappointment. Note that "product" is singular, defining Keynote. My other Apple products serve me loyally and superbly, which is why my huge disappointment with Keynote.
So here is my correspondence with Tech Support. I've removed names except mine.
I think it speaks for itself. They have notes from my conversations with them that I have current Apple computers, including a MacBookPro, not an old PowerBook, nevertheless, they have told me that the problem is mine because the fabulous hyper-performing Keynote software is choking my poor old machine (paraphrased muchly).:
Hi (support),
That's disappointing news, especially since this test was done on 3 machines: an old G4 400, a 2.0G Dual G5 and an Intel core duo MacBookPro which yielded identical results.
It is not a hardware issue.
I do not accept a brush-off that it is my hardware that is causing Keynote to be problematic.
I will assume that Apple is not interested in addressing these issues in public and that Keynote is substandard software that is in need of re-authoring.
Sorry to be so blunt, but Apple has set this tone with Keynote, and used its considerable reputation as a leading a/v technology innovator to imply that Keynote will deliver the excellence we Mac users have come to expect.
I have been a loyal mac user since the SE series and have enjoyed success with the machines and software offered by Apple, and depend on them for my livelihood. I'm currently using FC Studio6 and know that Apple is capable of maintaining its high standards.
However, Keynote fails to do that, instead behaving like a product that was invented in a teenager's basement and is in beta. I realize that it's not designed as a FCP level product, but it fails at the basic tasks that you advertise it will complete.
A version 4 product should work as advertised. Keynote certainly does not.
I'm deeply saddened that Apple seems to have become an iPod entertainment company, interested mainly in profits from entertainment rather than serious useful technology.
On 2007-Oct-19, at 10:14 AM, (tech support) wrote:
Hello Sir,
Unfortunately, this does look like it's mostly a case of some of the new Keynote features slowing down the performance on the PowerBook.
At this point, there isn't much else we can do in the way of troubleshooting.
If you are not satisfied with the performance on the PowerBook, using the previous version of Keynote is probably his best option at this point.
We will continue to research this issue, but at this point it's unlikely I'll be able to find additional suggestions for improving performance, as it looks like it is is reproducible and limited to older models.
On Oct 16, 2007, at 11:27 PM, Ron Tucker wrote:
Hi (support),
Thanks for your recent followup calls. I'm directing a video shoot so am a bit preoccupied.
Here are the tests I mentioned.
These are as simple as it gets, and I think highlights the synchronization problem with Keynote.
Test 1 is straightforward, and demonstrates that a single unedited recorded audio track will maintain mouse click synchronization.
Test 2 is the same file, but with audio modifications applied to each slide in succession.
This demonstrates a dramatic synchronization slippage.
The visuals occur before the click (and audio) markers. Keynote seems to be create delay in audio at each "record and replace" point. This accumulates as the audio is revised in successive slides.
These tests demonstrate that there is a fundamental flaw in how Keynote handles audio in its most basic application.
This does not address the slim toolset available, such as lack of insert capability and other basic audio tools, which is a separate design issue, and I suppose subject to "request for enhancement" feedback.
I've reluctantly abandoned Keynote for my project work at present until these basic issues are addressed and it can be demonstrated that Keynote can successfully execute its feature set.
<TuckerKeynoteTest.zip>
Message was edited by: Ron Tucker1 -
Help, please - Combined Limits and Expressions for Insurance Plans
I seem to be configuring something incorrectly using the Combined Limits and Expression in the IMG. I was wondering if somebody has used this successfully and can give me some pointers? I've used it successfully when I've limited a plan to coverage of not more than 50% of the coverage for another plan, but I can't seem to get it to work for my current requirement. Here is my current requirement:
I have 2 life insurance plans, one basic and one supplemental. The supplemental can only be elected if the basic plan is elected, so the basic plan would be the priority plan. The individual maximum allowable coverage amount for each plan is $3,000,000, which is configured under the coverage rules. However, the combined limit between the 2 plans is also 3,000,000. A person can have the basic plan only and have the full 3 mil, or they can have both plans and must not go over the 3 mil between the 2 plans. The basic plan is 1x but the supp plan can be 1x - 8x so it is very possible that the basic will not hit the limit, but the supp will.
I tried to set the combined limit of 3,000,000 for the 2 plans using the 2 pieces of the combined limits config, but I've tried everything, and it does not cut them back.
Can anyone tell me step by step how to configure this, or do I need to enable and develop a user exit?
Thanks!
LisaHi, Lisa
This should not be a problem.
Firstly, have you set the Basic plan as a corequisite for your optional plan?
Benefits--> Flexible Administration -->Prerequisites and Corequisites --> Define Corequisite Plans;
Choose your secondary plan from the drop-down; then define your primary plan as the corequisite. In most instances, selecting the 'Any plan required' radio button should to the trick.
Now for the combined limits:
This is a 2-step process.
1: Define Combined Coverage Limits.
Choose your Optional life plan, and enter the following: Limit Amount -- 3,000,000; Rel. Operator : >=
REPEAT FOR BASIC PLAN AS WELL!!!!
When you save this, your resulting screen should read something like this : OPTL Optional Life Limit 3,000,000 0.000 >=
2:Define Combined Coverage Limit Expressions
Select your Optional life plan.
Enter the following in the table:
1.00 | Basic Life Plan
1.00 | Optional Life Plan
Again, do the same for the Basic plan.
the combination of these two steps creates the following equation:
3,000,000 >= 1* Basic Life + 1* Optional Life.
Feel free to ping me if you have questions. Contact details are on my business card.
Rob
Select your Optional life plan -
K9A2 CF cold boot and RAID problem
Hi,
I am struggling with my mobo regarding recent cold boot issues and the problem to set up RAID on the SB600 chipset.
Here's my rig's description:
MSI K9A2 CF rev 2 (I believe because of the red heatsink) with the latest available bios flashed using the forum's tool.
Phenom 9850 BE (stock, never OCed) cooled down with Asetek closed-circuit watercooling.
2x Radeon 4850 1 Gb crossfire
4 Gigs of RAM (Nandya Technology)
HDD WD velociraptor 150 go, WD black caviar 640 go, 2x WD 1 To green caviar all drives are SATA-2
1 PCI SiI 3512 sata controller for the sata ODD drives (DVD + DVD burner)
PSU is advent 750 W
OS: Vista 64 bits home premium working with AHCI drivers
So here is the deal: the system has been running fine for about a year.
I recently bought two 1 To HDD to set up a RAID 1 for backup purpose. The goal is to run the velociraptor as system disk (which it is currently) in raid 0+1 jobd (say standalone), the WD 640 go as data disk raid 0+1 jobd (say standalone) and the two 1To as raid one array from the SB600 onboard controller.
So I flashed the bios to make sure I would have the latest raid rom. The flash was performed with the forum's flasher without a problem, followed by a load defaults and a clear CMOS to be on the safe side.
Since then, I have random cold boot problems. I fire it up, all leds and drives are on, but no post and nothing on screen, not to mention no beeps whatsoever. I already checked the connections, mobo condensators... everything looks ok. The system was bought pre-built and was working flawlessly beforehand. I need to power it off manually and restart it once to a few times and then it post and boots to the OS without a problem.
Is there any specific option I should look for in the bios to change that? I assume I might have made a wrong configuration at some point.
Concerning the RAID problem I cannot access the SB600 onboard Fastbuild utility as long as the PCI sata controller is plugged in --> I get the "Not enough space to load PCI rom" error message. Without the PCI card I can access Fastbuild and define arrays without a glitch. But if I disconnect the card, I no longer have optical drives
Does anyone have a clue how to use the SB600 in raid mode along with a PCI sata controller?
Also, when RAID is setup, arrays defined and all HDDs recognized by the bios, is there a way to make Vista load the raid driver without reinstalling from scratch? For now I can use SATA drives in AHCI mode but get a BSOD whenever I try booting from RAID.
I know that's a lot of questions but I could really use some help. I have been roaming the web and could not find anything.
Thanks in advance for your insight.
CheersQuote
Concerning the RAID problem I cannot access the SB600 onboard Fastbuild utility as long as the PCI sata controller is plugged in --> I get the "Not enough space to load PCI rom" error message. Without the PCI card I can access Fastbuild and define arrays without a glitch.
This is common problem with boot-roms, the BIOS can't handle multiple of them, only 1 if you use raid.
So disable the PCI-Sata bootrom or disable the RAID.
This is a BIOS limitation, nothing you can do about it.
AHCI is a type of RAID also.
What you see is normal, the BIOS doesn't have enough hooks to put a Boot-rom in, and exspecially the RAID MUST need one to function.
Other solution is to use Windows software raid and put the RAID controller in normal-mode.
You won't notice the speed difference anyway as the onboard is a soft-raid as well, but then done in the BIOS, however in both cases it's the CPU that must handle them. -
EQ, compressor, limiter and so on
So I guess GB for iOS does not support EQ, compressor, limiter and so on. But is there another app that will solve this using audiobus or Inter-App Audio?
The problems started before I did any removal.
I used a script by ShowStopper which pulled every part of compressor and DVDSP out except the compressor presets.
After the removal the original problem still existed. So I reinstalled as mentioned above.
However, today, I had an under an hour production and it finished without a hitch. I am encoding an hour and a half production and have gotten 28% of the way through.
Thanks for the heads up
Jim -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
BOSD, Battery issues and Heating problem after iOS 8 upgrade
i have upgraded my iPad mini to iOS 8. Ever since I upgraded to iOS 8 am facing blue screen issues and heating problem as well. This is really frustrating even the patch iOS 8.0.2 dint solve the problem. Are you guys listening our complaints. When will you fixing it.
The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV -
I am making code to try to make a game and my problem is that my code......
I am making code to try to make a game and my problem is that my code
will not let it change the hit everytime so im getting the first guy to hit 1 then next hits 8 and so on and always repeats.
Another problem is that I would like it to attack with out me telling it how much times to attack. I am using Object oriented programming.
Here is the code for my objects:
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class rockCrab {
//Wounding formula
double sL = 70; // my Strength Level
double bP = 1; // bonus for prayer (is 1 times prayer bonus)
double aB = 0; // equipment stats
double eS = (sL * bP) + 3; // effective strength
double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640)); // my base damage
//Attack formula
double aL = 50; // my Attack Level
double eD = 1; // enemy's Defence
double eA = aL / eD; // effective Attack
double eB = 0; // equipment bonus'
double bA = ((eA/10) * (eB/10)); // base attack
//The hit formula
double fA = random() * bA;
double fH = random() * bD;
double done = rint(fH - fA);
//health formula
double health = floor(10 + sL/10 * aL/10);
rockCrab() {
void attack() {
health = floor(10 + sL/10 * aL/10);
double done = rint(fH - fA);
fA = random() * bA;
fH = random() * bD;
done = rint(fH - fA);
System.out.println("Rockcrab hit" +done);
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class self {
//Wounding formula
double sL = 1; // my Strength Level
double bP = 1; // bonus for prayer (is 1 times prayer bonus)
double aB = 0; // equipment stats
double eS = (sL * bP) + 3; // effective strength
double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640)); // my base damage
//Attack formula
double aL = 1; // my Attack Level
double eD = 1; // enemy's Defence
double eA = aL / eD; // effective Attack
double eB = 0; // equipment bonus'
double bA = ((eA/10) * (eB/10)); // base attack
//The hit formula
double fA = random() * bA;
double fH = random() * bD;
double done = rint(fH - fA);
//health formula
double health = floor(10 + sL/10 * aL/10);
self() {
void attack() {
health = floor(10 + sL/10 * aL/10);
fA = random() * bA;
fH = random() * bD;
done = rint(fH - fA);
System.out.println("You hit" +done);
}Here is the main code that writes what the objects do:
class fight {
public static void main(String[] args) {
self instance1 = new self();
rockCrab instance2 = new rockCrab();
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
instance2.health = instance2.health - instance1.done;
System.out.println("You hit: " +instance1.done);
System.out.println("rockCrabs health: " + instance2.health);
instance1.health = instance1.health - instance2.done;
System.out.println("RockCrab hit: " +instance2.done);
System.out.println("rockCrabs health: " + instance1.health);
}when the code is run it says something like this:
you hit 1
RockCrabs health is 9
RockCrab hit 7
your health is 38
you hit 1
RockCrabs health is 8
RockCrab hit 7
your health is 31
you hit 1
RockCrabs health is 7
RockCrab hit 7
your health is 24
you hit 1
RockCrabs health is 6
RockCrab hit 7
your health is 17
my point is whatever some one hits it always repeats that
my expected output would have to be something like
you hit 1
RockCrabs health is 9
RockCrab hit 9
your health is 37
you hit 3
RockCrabs health is 6
RockCrab hit 4
your health is 33
you hit 2
RockCrabs health is 4
RockCrab hit 7
your health is 26
you hit 3
RockCrabs health is 1
RockCrab hit 6
your health is 20
Edited by: rade134 on Jun 4, 2009 10:58 AM[_Crosspost_|http://forums.sun.com/thread.jspa?threadID=5390217] I'm locking.
-
A rather odd and annoying problem has recently been occuring on my MBP. A couple days ago my remote (after working without fail for over a year now) suddenly stopped working. Yesterday night and this morning it started working again but after a while it stopped again. I've read dozens of support articles which haven't really helped because there seems to be another problem.
Most articles have stated that there is an option to disable the IR receiver in the "security" window under system preferences. When the IR and remote are not working this option disappears but when they are working the option is present. I have also tried replacing the battery without any result.
I am now thinking that it might have something to do with heat buildup because it is mainly occuring after the laptop has been on for about a half hour, so I am going to try to borrow someone's fan.
If anyone has any suggestions to solve this I would appreciate it if you could help. Thanks!
MacBook Pro 1.83 GHz Mac OS X (10.4.9)check out this thread. Seems to be the same problem.
http://discussions.apple.com/thread.jspa?messageID=4701905� -
LG Ally text message and gps problems
hello. ive been with verizon for about 10 years maybe. ive been overall happy with the service and customer service. but the prices should be alot lower.lol. i started out with the motorolas then switched to the lg phones. only problem with the motorola was the speakers. not loud enough. could never hear the phone ring. the lgs usually suffer from the same problem.
i had a few phone problems but nothing like this lg ally. im on my second one and about to be my 3rd one in about 3 months. 1st phone i had every problem under the sun. this phone i am suffering from text message problems and gps problems. i suffer from what everyone else has problems with. the messages wont send. they will eventually lock up. it will show the envelope with the red explanation point ( i think thats the graphic). then usually everytime when i sent a text the texts will close. it will send then bounce back and show up as a draft and i have to resend it and wait for it to go thru. finally the last problem with the texts. when i send a text a phone number from my contacts shows up and freezes on the screen. its in white text with a black background. its the same number every time. it stays on the screen until i restart or pull my battery out.
gps. when i open up google gps that comes with the phone i make sure the gps is on... when the directions are found and the map pops up 9 out of 10 times it just keeps saying searching for gps. the turn by turn never is found. the 1 time it does it takes a good 10 minutes to be found. atleast on my first one ally the gps did work 8 out of 10 times. it just took a good 5-10 minutes for gps to be found and show turn by turn.
anyone else have these problems? where you able to fix them or did you need to get a new phone? the 2.1 update was supposed to fix problems. i think they just made it worse. the ally is supposed to have 2.2 froyo. where is it. is it ever going to get it. i got this phone because i like the lgs and the keyboard. also the sales representative on the phone was giving the lg ally rave reviews. why couldnt he say dont buy this go with a motorola droid. this phone is the biggest junk ever madeI do apologize you are having trouble with your device I looked in our information system on the LG Ally in reguards to issues you are having it states if you have the Free Droid Security anti virus protection application down loaded it will cause the phone to lock up or freeze. Check and make sure you do not have the application on your device. Check you GPS settings and make sure correct. Go to Settings; Location & Security; make sure GPS is on wireless network. If this does not fix issue you can try doing a Master Reset on your device. Make sure your contacts are saved in your G-mail account or through Back Up Assistance.
Master Reset/Soft Reset:
Factory Reset option 1
From the main screen, touch menu tab
Touch Settings
Touch Privacy
Touch Factory Data reset
Touch Reset Phone
Warning: This will erase all data from your phone, including:
Your Google account
System and application data and settings
Downloaded Applications
It will not erase: Current System software and bundled applications; SD Card files, such as music or Photos
Factory Reset option 2 - Warning this will reset device back to original factory settings.
Turn off the phone
Press and hold "home" + "end" + "volume up or down" keys together for a few seconds when the device is power off
Once device displays boot information, release keys.
Soft Reset
Press the Power key.
Touch Power off.
Touch OK.
Press the Power key to power on the device.
or
Remove battery cover, remove battery and reinstall.Also there is a new update for LG Ally it will be the Froyo 2.2 but there is not release date available at this time it will post on your device when available. Hope this Helps. Leslie -
i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!Hi b,
Have you restarted yet? -
I have an Ipod video 30g that says Please wait very low battery. I charged it for about a day and the problem persists. I've tried using some solutions on the internet and none of them worked including: holding the menu and select, holding select and play to put it in disk mode with no avail. Is there anyone who can help me!!!
Have you read this post written by another forum member?
The Sad iPod icon.
However, as your iPod was purchased on Boxing Day, why not get it serviced under the warranty?
You can arrange online service here.
Service request.
Or if an Apple store is near you, take it there and have them check your iPod.
You can make an appointment by using this link.
Genius Bar Appointments.
Maybe you are looking for
-
How To Write A Sql Query to Show 0's
I never can remember this :-/ What do I have to do to get a SQL Query to return 0 if the Count of a condition is 0? For example lets say Joe, Jay, Jim could log on, but only Joe & Jim logged in Jay would not be returned in the query below. What wou
-
Null Pointer exception in AsyncPortalComponentResponse
I am getting a Null Pointer exception in AsyncPortalComponentResponse class. The exception is as below. The exception message does not explain much. Does any one know about the AsyncPortalComponentResponse class or have the its code ? I am getting th
-
IPhone not showing up in my computer (PC Question)
Hey guys I have a PC and as I was plugging in my 4s the phone usually shows up in my computer as an iPhone but now it is not showing up but is showing up in iTunes. Can anyone help??
-
Hi, were moving from forms 9.0.4 to 10.1.2. Besides re-compiling all the modules (*.fmb, *.mmb & *.pll), is there anything else? Does anything have to happen with form object libraries? The form template that we used under 9.0.4 to create the object
-
10.4.11 Kernel Panics & Auto-Rebooting
I'm having problems with my servers (a G5 Xserve running 10.4.11 OSX Server & a Power Mac G5 running 10.4.11 OSX Server) and I can't seem to pinpoint the causes. The only reason the Power Mac G5 is running server is in case the Xserve poops out on me