Photogallery jQuery plugin doesn't show thumbnails

I have built 2 sites using Adobe Business Catalyst. Both use the built in photogallery which is a jQuery plugin. The first is HTML4. The second is HTML5.
The HTML4 site runs perfectly on all iOS devices. The HTML5 site, doesn't show the thumbnails. Oddly, I noticed if I click on the blank page, it DOES trigger the image in the lightbox, so the link IS hot.
I have tons of experience cross browser/platform checking for desktop, but I don't know where to begin for mobile/tablet. Of course, I need it FAST! Where do I start?
thanks,
mookie

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Similar Messages

Flash plugin doesn't show the content, I wonder why.

when there is a page using text in a Flash part the plugin doesn't show it. For example the Page has some texts in a flash extension but I can't see the text at all.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

[svn:osmf:] 17940: Fix FM-982: MAST plugin doesn' t show preroll for F4M resources.

Revision: 17940
Revision: 17940
Author:   [email protected]
Date:     2010-09-29 14:47:13 -0700 (Wed, 29 Sep 2010)
Log Message:
Fix FM-982: MAST plugin doesn't show preroll for F4M resources.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-982
Modified Paths:
    osmf/trunk/plugins/samples/MASTPlugin/org/osmf/mast/MASTPluginInfo.as
    osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/MASTPluginInfo.as

[svn:osmf:] 17941: Fix FM-981: MAST plugin doesn' t show preroll for SMIL resources.

Revision: 17941
Revision: 17941
Author:   [email protected]
Date:     2010-09-29 15:04:11 -0700 (Wed, 29 Sep 2010)
Log Message:
Fix FM-981: MAST plugin doesn't show preroll for SMIL resources.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-981
Modified Paths:
    osmf/trunk/plugins/samples/MASTPlugin/org/osmf/mast/MASTPluginInfo.as
    osmf/trunk/plugins/samples/MASTPluginNew/org/osmf/mast/MASTPluginInfo.as

I am modifying the correct httpd.conf file on the server, it just doesn't seem to work. - If I put the rewrite rules in the <Directory /> the rewrite works but it adds /Library/WebServer/Documents to the URL.
I also tried putting the rewrite rules in <IfModule mod_rewrite.c> but that did not work either.
mod_rewrite is enabled and running on the server.
I will post the rewrite rules again in the code brackets. Sorry for the long post. - If some one can try them out on their Leopard Server to see if they can get them to work, it would be much appreciated. Again, these work on my Leopard Client but I can't get them to work on Server.
-- The httpd.conf file posted above is just the default conf file found in /private/etc/apache2/
<code>
RewriteEngine On
Options +FollowSymLinks
RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
RewriteRule (.+)\.php(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
RewriteRule (.+)\..(.)$ $1$2 [R, L]]
<code>

Acrobat X plugin doesn't show up in Chrome

On mij PC (Windows 7 Pro) I have installed Acrobat X Standard 10.1.7.
Today (20130608) I installed Chrome, besides Chrome I use Internet Explorer 10.
The Acrobat Toolbar appears in IE, as it always did. However the Acrobat Toolbar does not appear in Chrome.
The toolbar also is not present in the list of plugins of Chrome, in the list there is a Adobe Reader plugin version 10.1.7.27.
In the list of extensions the Acrobat plugin doesn't appear either.
I tried a repair installation of Acrobat, without success.
Thank you in advance for your help.
Wilty van Rees

Hi race2000,
Acrobat X plugin is not compatible with Chrome. Acrobat XI is.
You might want to refer the Doc : http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html

Play plugin doesn't show up 64bit

Anyone been able to fix the play plugin so it shows up in 64bit ?
any suggestions?
Thanks,
Paul

This has been well documented here and on EastWest's forum as well, there is nothing to fix for the PLAY plug-in.
I can't say RTFM because it's not in the manuals, but I do own PLAY and it's been on ongoing post over at EastWest forum and they'll just close those threads because it's the same answer over and over again until EastWest makes it official that the 64bit version is available on the MAC.

IPhoto doesn't show thumbnails anymore

I actually figured this out- I am posting this as a solution, not a problem. It frustrated me but I figured it out.
THE PROBLEM:
You click on an "event" and it brings up a picture from that event, however you can only see one picture. Clicking left-right on either the buttons or the keyboard move you to different events, not to different pictures. You have tried to go to "View -> Thumbnails -> Show" but it's all gray, meaning theoretically you ARE in thumbnail view, even though you can only see the one picture.
THE REASON & SOLUTION:
The possible reason you are having this problem is the magnification slider in iPhoto on the bottom right. While in thumbnail view, apparently, you can zoom all your thumbnails in to a point where it's only showing one picture- but you cannot browse the rest of the album or event this way. If you are having the problem above, then your magnification slider should be all the way to the right. Move it to the left, and other thumbnails should start to appear. Eventually you see all your thumbnails again. You can still scroll through all the photos using the full-screen thumbnail view by clicking/scrolling up and down, not left to right. There should be a scroll bar visible on the right. Its not obvious like on these discussion boards, but its there.
Hope that helps. I would like to have Apple change this behavior- it will deffinetly frustrate a lot of people.

this is a known bug (or maybe a "feature" - who knows)
Please provide feedback to Apple re this to be sure they understand users view of it - iphoto menu ==> provide iPhoto feedback
LN

Bridge 5.4 doesn't show thumbnails of .CR2 files from Canon 50D

I downloaded bridge5.4 now my CR2 files taken from my Canon50D are not loaded as thumbnails in Bridge, the drop down menu displayed when clicking on them does not show the "Open in Camera Raw fundction". What should I do?

If after purging the cache and rebuilding it and camera raw still does not work it either means the current version does not support the camera (if new camera), you have the ACR file in the wrong folder, or there is more than one version in the folder.
Open up PS and click on help/about plug-in/camera raw. It will tell you what is there.

XFCE4 systemload plugin doesn't show graphs.

Hello,
I just installed the xfce4-systemload-plugin, which is supposed to show me a nice little bar/graph showing me how much RAM / CPU I'm using at the time. The plugin does show, but I don't see anything in the graphs/bar. When I hover my mouse over it, I do get the correct output; it's just the graphs that show nothing.
Anyone on a possible fix?

I know this thread is old, but could you please post the solution for this issue?
Having installed:
yaourt -Qs hddtemp
extra/hddtemp 0.3.beta15.45-2
yaourt -Qs xfce4-sensors-plugin
extra/xfce4-sensors-plugin 0.10.99.6-2 (xfce4-goodies)
ps aux | grep hddtemp
root 9355 0.0 0.0 5968 952 ? S 16:04 0:00 hddtemp -d /dev/sda
cat /etc/conf.d/hddtemp
PARAMS="-q -l 127.0.0.1"
DRIVES="/dev/sda"
Also hddtemp can read my temperatures:
hddtemp /dev/sda
/dev/sda: WDC WD3200AAKS-00L9A0: 32°C
Suid-Bit is set
ls -l /usr/sbin/hddtemp
-rwsr-xr-x 1 root root 29272 5. Mär 19:10 /usr/sbin/hddtemp
Regards

Ipod photo section doesn't show thumbnail images

Once I have downloaded my photos onto the ipod, only the first 7 images or so show up. The rest are there, and appear as blank boxes, even when I scroll through them. I am later able to see them on my computer once they've been downloaded but why can't I see them on the ipod?

Update:
I called a friend who came over with an iPod Mini and an iBook.
Connecting the iPod Photo to the iBook was no problem and it mounted within seconds...
Connecting the iPod Mini to the iBook wasn't a problem either.
But... none of the iPods connected to the iMac...
neither after several resets and reboots nor after exchanging fw cables.
I also ran the hardware test which didn't show any problems.
Can anyone help me, pleeeease :-[

IPhoto doesn't show thumbnails of videos.

When I connect my Sony Handycam HDD, iPhoto opens and a series of video clips are shown in the Device. However these frames are blank and have no image so I can't see which video is which for selective importing. Photos taken on the Handicap appear OK.

A note on AVCHD: This format was developed for people who are shooting to edit the material afterwards. If you're shooting to edit, then iMovie or Final Cut are the correct home for this material. If you're not shooting to edit consider using one of the other video formats on your Camera.
So, in this case the workflow would be to import to iMovie, edit as required. Output the finished movie and import that to iPhoto.
As I say, if that's not what you want to do, don't shoot to edit.

TWAIN.plugin OS X doesn't show

I read the Help http://kb2.adobe.com/cps/405/kb405072.html
This part I don't understand:
Quit Photoshop CS4.
Copy the TWAIN plug-in from the /<language>/Goodies/Optional plug-ins/Import-Export folder on your installation media into the /Adobe Photoshop CS4/Plug-ins/Import-Export folder on your hard disk.
Restart Photoshop to enable the plug-in.
Part 2 is what I don't understand. I have CS4 Collection and don't see any <language>/Goodies/Optional plug-ins/Import-Export
but I did find this:
http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-790aa.html
The TWAIN plug-in is optional only for Mac OS (and available for download here).
I downloaded the file and put the TWAIN.plugin (Universal) in the Import-Export folder in CS4 but the the TWAIN.plugin doesn't show in Import.
I also have GraphicConverter and can TWAIN from that.
Prior to CS4 I was using CS and the scanner worked fine.
(ps. GraphicConverter uses the BrotherTWAIN.ds in Library/Image Capture/TWAIN Data Sources... when the BrotherTWAIN.ds is in the Data Sources folder CS4 sees it (Import/BrotherTWAIN) but I get error "No scanner can be found"... assuming plugin is incompatible with CS4)

When you click File>>Import you should see your Brother scanner listed (it may or may not show TWAIN with the scanner name) if the plug-in is properly installed.
If CS4 lists the scanner but says it can't find it, that's an indication that the TWAIN plug-in is working (because it recognizes a TWAIN scanner on the system BUS) but the Brother drivers are not present, out of date or not recognized by PS. Try downloading and installing the latest driver package for your scanner and see if PS recongizes and scans from it.
And Chris is an Adobe employee so he knows more and better about PS scanning than I do, but I haven't had single PS crash in CS4 with Snow Leopard using either of two TWAIN scanners (one HP and the other Canon).

My java applet doesn't show up in Firefox

We have a new Mac running OSX 10.8.4 and installed with Firefox 21.0 and Java 7 update 25. The web applet/plugin doesn't show up in Firefox, if we go to java.com and do the tests it just comes back 'We are unable to verify if Java is currently installed and enabled in your browser'
The same test in Safari comes back fine and shows Java 7 Update 25 installed and working.
The plugin does not show at all in Firefox add-ons. Browser functionality is enabled in the main Java control panel.
We have completely removed and reinstalled both Firefox and Java.
Thanks

Hi iNerd
Thanks for the link but neither of the two options that are discussed are presented to the user. Instead the user just gets the message 'We are unable to verify if Java is currently installed and enabled in your browser'. I know it is installed and enabled for general browser use as it all works fine in Safari. We would obviously just use Safari except the key site the user needs to link to works better with Firefox.

How can I get photo of callers to vshow full page since I just did the update it doesn't show but a thumbnail pic

How can I get photo of callers to vshow full page since I just did the update it doesn't show but a thumbnail pic

That is the design in iOS 7.1 and there isn't any way to change it. You can provide feedback to Apple if you want: http://www.apple.com/feedback/

I am using Firefox 7.When I tried to open a player the install instructions from the website says, download the widevine plugin from the automatic download pop-up,but my Firefox browser doesn't show me the automatic download pop up to download the plugin.

The automatic download pop up for downloading the plugin was not showing in my firefox 7 browser.

Hi and thanks to not leaving the firefox user alone.
Cor-el your answer is right as the madperson is and I already knew all these
answer and I said that before I don’t use any antivirus and I always turn off my firewall from the moment I installed my Windows.
I even turn off any automatic update for any of my software and I never let any unknown plugins or any thing like that be install without informing me. And if you know some things like Offline Storage and cookies must be to much more than usual and you have to clear them and delete them and I know so much more
And if you want to know it fixed now. But I don’t know how?
For understanding my problem read and research about Ixplorer.exe virus it is the same problem about the speed but the different is it doesn’t show any process in task manager like Ixplorer.exe virus
Bt I have done some things but still I don’t know that’s why it is fixed or not
First: I searched my system and removed any files have been crated on my system from two days ago since the problem happened.
And then I used to go about the article in this page and did like this:
http://answers.yahoo.com/question/index?qid=20080910101846AAazxN5
but still I don’t know any thing about the problem.
I can do so many things to fix but I am just curios if that is a virus why it just cut the speed when I am using the browser.
Please if any one found the reason send me your information I like to know it will improve my knowledge however my problem is solved fro now.

Photogallery jQuery plugin doesn't show thumbnails

Similar Messages

Maybe you are looking for