Photomerge needs non-edited JPEGS to be saved again...error

Greetings,
Up until yesterday things have been flowing smoothly with Photomerge automation in Photoshop CS6.
I usually import RAW files to stich together, as well as JPEGS. Randomly, it's to the point where I'll import several JPEGs, go to Add Open Files, and it gives me the "Documents must be saved before they can be merged" error. They haven't been edited?? What gives? I've tried restarting Bridege, Photoshop, my computer but the probelm persists.
Someone on a previous post said it was the asterik found after the file name in Photoshop that was the culprit ((ex., [email protected]%(RGB/8) * )). I enabled the script event manager and restarted, but nothing changed, asterik is still there, asks to save.
The only work-around is to go through every JPEG after importing and save them again. Sort of annoying when there's 10 or so images to uselessly save before stiching.
I have a feeling that Bridge is doing something, or Photoshop makes a slight change as I import that gives me the error that they haven't been saved.
Any ideas?
Thanks,
Hunter
UPDATE 08/21/13
I just happened upon some JPEGs that don't have an asterik once imported into Photoshop. With these, Photomerge does Add Open Files with no errors. So now I'm wondering if it's something to do with the camera when it write a JPEG, or if it's still Bridge thats acting up and changing stuff slightly.

Hi,
You should provide persistent as an option.
If you are using XIR2 ( upto SP3):
1. Open report in edit mode --> Edit query --> take a snapshot for reference
2. Remove all the prompt objects
3. Select Run query and then cancel it imeediately
4. A popup window will appear to purge the data. Select yes.
5. Then go back to Edit query and then add all prompt objects.
6. Save the report.
If you are using XI R3.x / XIR2 SP4
1. Purge option is available in Edit query/Edit Report
2. Save the Report.
In boht cases you should select the prompt parameter as Persistent.
Hope this helps!

Similar Messages

Editing JPEG in RAW, Saving Crooked

HELP!! My camera does not shoot in RAW format, however PSE9 states that I can edit my JPEG images in "camera RAW" then save it to print later.(They save in DNG. or dng. only)
PROBLEM: the image is saved an eighth turn crooked and generaly most of the image is lost or out of "frame" so I can't even re-crop or straighten the image back out!!
How do I save this new RAW image straight? Or what am I doing wrong??
Tried to upload an example but its too bigI guess, Sorry.

OK So I looked into y'all's advice and went back to try to discern what I was doing. So here is a break down of what I did.
Opened PS Elements 9 Edit
Chose photo to edit, opened as "Camera Raw"
(Photo opened in RAW Editor)
Edited shot
Saved shot in 2 formats;
Saved as a JPEG: (result; shot saved in reverse and crooked by 1/8 turn left, but I can open anywhere and print)
Saved as a DNG: (result; Shot saved correct, but only opens in RAW Editor and can't print!!)
I prefer the RAW edited shot over the PSE9 Editor shot but I can't figure out how to print it!!
PS: Can someone please translate what ACR is?!?!?!
Sorry still new to the technical lingo!!

Help urgently needed with edit to tape / print to video error

I have tried to edit to tape and print to video a sequence (0my whole project, worked for way too many nights to let go... so frustrated and sad right now because it doesn't work.
The project is saved on an extern harddisk, my harddrive on teh pc is too full (not big enough).
My camera and FCP connects but all the time I get an error that 'the tape may be locked' . AND I HAVE TRIED WITH DIFFERENT TAPES, none of them were locked!
I am not really sure how to set the camera in this VTR mode... I have tried in the settings to set it in webcam mode... and I have tried without... and I dont have a button or setting called VTR, only a *PLAY' option or a 'FILMØ option....
My A/V settings are FireWire PAL and DA PAL 48khz ... however have no ide what that means or if these should be changed...?
I checked from apple but cannot find my DV cam on the list... hmm, does that mean I cannot do edit to tape recordings???
My Dv cams informations:
NV-GS140 by Panasonic, Model 0x80330B, 0x804580114B5DD1
I checked the system settings and was able to the FireWire/NV-GS140 Unit
I have a MacBook1,1 / Intel Core Duo/ 2 GHz
OS 10.4.11
I use the version FCP 2
Please help me out, I am really without any good suggestions how to proceed!

You're going to have to use a dvd authoring program. Burning the seq to a dvd qill just create a qt movie on a dvd data disc. It won't create a dvd video disc that plays in a dvd player.
Export from fcp a QT movie, current settings, self-contained. Use Anamorphicizer (http://mac.softpedia.com/get/Video/Anamorphicizer.shtml) to make imovie recognise it as 16:9. Then import that file to idvd.
Or you can drop your 16:9 sequence into a new 4:3 sequence to letterbox it, then you can do the export as above but skip the anamorphicizer step.
It's better to use compressor on the original 16:9 sequence and then use dvdsp to author, but if you've never used dvdsp it's a big program to get your head round.
The export can be done in two ways;
1. Export from fcp using 'export using compressor'.
2. Export a QT ref/self-contained movie and import that into compressor.
3. Export a QT movie and import it direct into DVDSP.
The second option will take longer initially (if you use the self-contained option) but will then allow compressor to work in the background, the first option will tie up fcp for the duration of the encode.
Once in compressor use one of the 16:9 dvd presets, depending on the duration of the movie and the quality you want. Don't try to adjust the settings. If your movie is 31 mins just use the shortest option (i think it's 60min) and make sure you select the m2v video and ac3 audio options. If you just select the mpeg 2 video you'll only get video, as you've discovered.
Open dvdsp and create your opening menu and a video track, import the movie file, add it to the video track, and then add the audio to the track as well. Then add any chapter submenus you may want.

Make Non-editable Column in Table Control of ME21N and ME22N

Hi Experts,
I was trying to look for a solution to make the columns for field MEPO1320-SLFDT(Stat Deliv. Date), MEPO1320-EEIND (Deliv. Date) and MEPO1211-NETPR (Net Price) from transaction ME21N and ME22N to be non-editable ONLY when Qty Received (MEPO1320-WEMNG) > 0.
I'd found that the modify screen codes were located at Class CL_TABLE_VIEW_MM, Method MODIFY_SCREEN_TC_LINE but there were no enhancement spots available to add my code. Is there any other method i can use to make those fields non-editable?
Thanks in advance!
Cheers,
Cheng
Edited by: Cheng Mei Tan on Jun 4, 2009 9:31 AM

Hi Cheng,
I think you can use this BAdi: ME_PROCESS_PO_CUST - Enhance Processing of Enjoy Purchase Order.
Use the method PROCESS_ITEM to control the fields at the item level.
I think is not possible to make the fields non-editable, however, you can put an error message whenever your condition is verified, and the user won't be able to change the fields.
Cheers,
Pedro

Need to do one field as non editable once a document is moved to 'executed' phase.

Hi All,
I have a field called 'comment' in Contract document. And once the document is moved to Executed phase all the fileds becomes non editable. And since 'Comment' is free text my user wants to do it as editable even when the document is in executed phase.The phases include
1.Draft
2.Budget Owner Approval
3.Financial Approval
4.Procurement Approval
5.Approved
6.Digital Signature
7.Executed
I tried this both in post phase script as well as pre phase script and found it's not working. Please suggest your ideas. Is there any other place I need to add code.
Postphase
if (phase.equals("Executed"))
logMsg.setLogMessage(" Executed START ");
Logger.info(logMsg);
//Changes done by me
comments = doc.getExtensionField("NON_DIGSIG_COMMENT").get();
logMsg.setLogMessage(" Comments are " + comments);
Logger.info(logMsg);
IapiDocumentLockManager.unlockField(session,doc,"NON_DIGSIG_COMMENT");
//Changes ended
parent = doc.getParentIBean();
if (hasValue(parent))
// get associated vlv value for phase
ValueListValueIBeanHomeIfc vlvHome = IBeanHomeLocator.lookup(session, ValueListValueIBeanHomeIfc.sHOME_NAME);
if (classinfo == 1004)
{// parent is Master Agreement
vlvBean = vlvHome.findUniqueByNameType("Executed Agreement",10);
} // end if classinfo == 1004
else
vlvBean = vlvHome.findUniqueByNameType("Executed Agreement",1);
} // end else
if (hasValue(vlvBean))
vlvLocalizedRef = vlvBean.getLocalizedObjectReference();
// set parent status
parObjRef = doc.getParentIBean().getObjectReference();
parentHome = IBeanHomeLocator.lookup(session, parObjRef);
parentHome.upgradeToEdit(doc.getParentIBean());
doc.getParentIBean().setStatusRef(vlvLocalizedRef);
logMsg.setLogMessage(" Parent Status updated to " + vlvLocalizedRef.getDisplayName() + " ");
Logger.info(logMsg);
parentHome.save(doc.getParentIBean());
logMsg.setLogMessage(" Parent saved ");
Logger.info(logMsg);
} // end if hasValue(parent)
logMsg.setLogMessage(" Executive Summary Approval END ");
Logger.info(logMsg);
Prephase
if (hasValue(other_phase) && hasValue(phase) && phase.equals("Approved") && other_phase.equals("Executed"))
        logMsg.setLogMessage("Entering comment block");
        Logger.info(logMsg);
        //Changes by Lakshmi
        comments = doc.getExtensionField("NON_DIGSIG_COMMENT").get();
    logMsg.setLogMessage(" Comments are " + comments);
    Logger.info(logMsg);
    IapiDocumentLockManager.unlockField(session, doc, "NON_DIGSIG_COMMENT");
        if (!bypassCheck)
        ae.chainAtEnd(doc.createApplicationException("NON_DIGSIG", "zclm.contractdocument.advancetoexecutedfromapproved"));
    } // end if (hasValue(other_phase) && hasValue(phase) && phase.equals("Approved") && other_phase.equals("Executed"))
//Block added my me
    if (hasValue(other_phase) && hasValue(phase) && phase.equals("Digital Signature") && other_phase.equals("Executed"))
        logMsg.setLogMessage("Entering comment block");
        Logger.info(logMsg);
        comments = doc.getExtensionField("NON_DIGSIG_COMMENT").get();
    logMsg.setLogMessage(" Comments are " + comments);
    Logger.info(logMsg);
    IapiDocumentLockManager.unlockField(session, doc, "NON_DIGSIG_COMMENT");

I agree with the definition of a position - that it's an occurrence of a job in an Organization. And I also couldn't agree with you more: that defintion shouldn't preclude you from moving the position around the company with re-orgs etc.
Sadly that's a limitation of Oracle HRMS and there is no way to change the Organization of a position. You'll just have to streamline your processes to clone positions instead. Here, Position Copy is your friend:
*HRMS Manager > Work Structures > Position > Position Copy
There are also other tools that may help. Check out:
Need To Change the Organization Associated with a Position [ID 375483.1]
Does that help?

Needed to make baseline date non-editable

Hi Gurus,
My requirement is to make baseline date non editable for miro.Please help how to proceed for this.

Hi,
In txn. SHDO create a screen Variant for the tcode MIRO (prog. SAPLFDCB, Screen 0020).
Then click on Create icon from top
It will open the MIRO screen, then click on payment tab, maintain entries in baseline date then clik enter it will popup one screen, there you need to flag under "output Only" for Baseline date, then save.
this setting will make non editable field.
Regards
GK.
Edited by: Gnana Kumar on Oct 28, 2010 2:34 PM

I need to edit text in a jpeg file. How do I do that?

I need to edit text in a jpeg file. How do I do that?

Unfortunately you can't. A JPEG is a flat raster (pixel-based) image file which has no awareness of "text" inside it. You could try to erase the text and graphic under it and then recreate the text, but it's best to do so using a mastering format such as PSD (Photoshop) or PXM (Pixelmator), so that you can export as JPEG but keep your layered master for later editing.
Matt

I have been sent a .pages document and would like to extract the photos included in the document as jpegs (need to edit on photoshop and put back in), is this possible? can't figure out how to do it.

I have been sent a .pages document and would like to extract the photos included in the document as jpegs (need to edit on photoshop and put back in), is this possible? can't figure out how to do it.

I'm going to answer my own question:
Easy steps
Locate the document in the Finder.
Control/Right-Click on its icon.
Select Show Package Contents
All images and embedded objects appear in ‘Data’ folder
From this blog
http://vernonchan.com/2013/10/how-to-extract-images-from-apple-pages-5-0-documen t/

I need to do a file that can be edited by anyone after saved, there is any Indesign saving format that allow it?

I need to do a file that can be edited by anyone after saved, there is any Indesign saving format that allow it?
There is any way to let one page of the final pdf exported file editable?

Hi there
You haven't seen any replies because you posted this to the Captivate forums. Hang tight and I'll move it over to the InDesign forums where it may gain some traction.
Best of luck in finding a solution! Rick

Table control : Need to change Single field as non editable

Hi Experts,
Plz help me out. In a table control there r 7 fields and only one field is editable. When i change the status of a record as delete in tat table control, only the deleted record (all fields)should become non-editable. Is it possible? Pls suggest.
Regards,
J. Sriram.

Hi,
In PBO of your screen
you should be using a step loop like this :
CONTROLS control1 TYPE TABLEVIEW USING SCREEN 100.
LOOP AT itab WITH CONTROL control1.
ENDLOOP.
Where the control1 is the tableview control defined in your program
and placed on your screen.
Put a second loop on screen inside this loop ant set the related attribute :
LOOP AT itab WITH CONTROL control1.
LOOP AT SCREEN.
IF SCREEN-NAME = 'COLUMN1'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDLOOP.
So you can set cells editable or non-editable
and you can filter it which record & which field..

Help Needed---Opening Attachments/Templates of a BP in non-editable mode

Hi...
I am new to CRM...
How do we open a document/Template attached to a BP in non-editable mode in web UI?
Helpful Answers would be rewarded.
Thanks
Swapna

Hi...
I am new to CRM...
How do we open a document/Template attached to a BP in non-editable mode in web UI?
Helpful Answers would be rewarded.
Thanks
Swapna

Fillable PDF to saved non-editable PDF

I currently have a trial version of Adobe Acrobat 9 Pro and Livecycle Designer ES 8.2. I am looking to create a fillable form PDF and then send it to clients who will use adobe reader to fill the form and then save it as non-editable PDF form for general usage.
How can this be done?
Thanks, Vijay

Hi Michael,
Thanks much for the response, can you help me with instructions on how I can enable extended rights? Sorry, I am not too familiar with the things in Acrobat or Livecycle.
Thanks,
Vijay

While saving a opport page needed in editable mode till errors are present

hi all,
When i save any opport with errors it gets save with errors messages but the page is in non-editable mode but we want it in the editable mode till the errors are not removed fully.
Any pointers will be highly appreciated ,
Thanks in advance,

Hi,
Can you not bring the transaction in editable mode by clicking on the Edit icon.
Regards,
Deepak

How to make some fields of a view non editable

Hi experts,
I need to make some fields like system user, system time and system date of a view non editable and after saving values for all other editable fields, the system should fill the values for the non editable fields as well.
Kindly help in this regard.

I am assuming that you created a maintenance view for your table. Under view fields there is a column called 'Maintenance Attribute for view field' (one character field with 'P' in the column. Set that column value to 'H' for the fields that you want to hide.
You then have to go to SE54, give your maintenance view name, in the menu, 'Environment-->Events' create an event 01 with your own code to fill in those hidden fields. Look with key words 'Table Events' in this forum and you will get a lot of examples.

Making an editable PDF Form non-editable (a shortcut)

How to make a PDF form non-editable or locked.
For those who aren't script-savvy, I believe this may be a little shortcut to editing a PDF form and then saving and sending it as a non-editable or locked PDF.
This is what I have written out for my client, whom I provided an editable PDF Form, so they could edit the PDF and then send it out to their own respective clients as a NON-editable PDF.
Instructions as follows:
How to save your PDF Form into a separate non-editable PDF to send to your client: (Using Adobe Acrobat Professional)
Step 1. Fill out the original PDF Form
Step 2. Once finished, go to “File” menu and click “Save a Copy” - title the file appropriately and save it to the desktop.
Step 3. Close the editable PDF document and do not save it (Saving it will save over the original file). Now open up the PDF you’ve just saved to
                    the desktop (you’ll now take the steps to make this file only non-editable).
Step 4. In the top menu, go to “Advanced” then select in that drop down menu “Security” then “Show Security Properties” - a ‘Document Properties’ window will now appear.
Step 5. From this new window, select the “Security” Menu. Set your ‘Security Method’ to ‘Password Security’.
Step 6. A new window will appear named ‘Password Security Settings’. In this menu, tick the box that says “Restrict Editing & Printing of the document”
            you’ll need to a) set a password for it, and b) In the ‘Printing Allowed’ drop down box, select ‘high resolution’   and if you want to, tick the
            box that says ‘allow the copying of text, images and other content’
Step 7. Click OK and Save the document. Now it’s not editable unless you have the password.
Note: If you happen to want to edit the PDF at a later date, you can open the file and in the ‘Security settings’ menu on the left hand side
(the menu is represented as a little gold lock) click ‘Permission Details’ then ‘Change Settings’ to revert everything back to an editable document
- repeat the above steps to make it a locked document again.

Thanks for your suggestions. You should also consider flattening a form if you want a non-editable copy; because the permissions password is not always respected by third-party PDF applications (for some people the form will remain editable, depending on what software they're using).
Flattening a form can be done in several ways in Acrobat: you can run a script - this.flattenPages() - or print the PDF back to PDF (aka refrying), or use the Sanitize tool in Acrobat X. It also strips out hidden content associated with the form (button actions, field calculation scripts, etc.) so provides additional data protection. Sanitize is the heavy-duty option of the three; it will remove all hidden content, leaving only what you see on the page.
One correction to your workflow - the Save a Copy menu item is not intended for creating a duplicate of a normal form, it's only available if the form has been rights-extended and it serves to remove the extension certificate from the PDF (allowing full editing in Acrobat again). As your client is working in Acrobat they don't need a rights-extended version in the first place, and working with a normal form will make things simpler for them. In Acrobat X Pro you could create them a custom Action which automatically flattens the file and saves a duplicate, so they don't accidentally overwrite the original.

Photomerge needs non-edited JPEGS to be saved again...error

Similar Messages

Maybe you are looking for