Photomerge with 125 RAW photos, 16 megapixel images, Help Needed

I have 125 raw photos that are 4912*3264 pixels I am trying to photomerge all them using the Cylindrical setting. And it is not working. I have let it go for like 12 hours and nothing is happing. Windows task manager flashes "photoshop not resonding" then it goes away and back and repeats... Processor peaks out only at like 15% after all images load and it starts to process.
I tried going into Preferences and messed with ram allocation etc and other settings.
Using latest PS version
I am using CS6
Windows 8 x64
Intel Core i7 920
18 Gig of Ram
main drive for windows
raid for casch
disk for images
Nvidia GTX 560 HD
Any suggestions?

It might be, that depending how the pano is arranged, that your actually exceeding the 300,000 x300,000 pixel limit in photoshop
if indeed that is still the limit in photoshop cs6.
Or you just don't have enough system resources for a pano (image) of that size.
It's possible you could try to do the pano in sections and then assemble the finished result by hand in photoshop.

Similar Messages

Need help with cannon RAW photos

Please help- let my employee go and nearly 100 photos of my products were left on my hard drive, but I can not get them to open. They are somehow jacked up (show a different icon than they did). They have no previous version, and absolutely NOTHING I have tried to open them will work. Would someone be willing to test one to see if they can figgure it out? Or, has anyone fixed this problem before?

You are a genius! Now that I understand that those are support
files, and know what I am looking (at) and for- I found all the photos.
She left us in quite a mess- both with the photos and our web page so
thank you again for helping. Feel free to let me know if you need
anything in the future. I won't forget your help!
Cristi
910 10th Street, Greeley, CO 80631
P: 970-351-6398
F:
1-970-352-1085
[email protected]
facebook.com/AwardAlliance
www.awardalliance.com
Award Alliance is always doing cool
things on our facebook! Come like us, and maybe see your awards featured
there! (facebook.com/AwardAlliance)
On 2013-09-26 19:35, ssprengel
wrote:
RE: NEED HELP WITH CANNON RAW PHOTOS
created by
ssprengel in Photoshop Lightroom - View the full discussion

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

Help with managing RAW and jpeg images and installing iphoto 9

Greetings: Fist, let me make the neophyte apology and plea - I'm sorry, I should have come here first; I didn't and now I need your help.
I have just purchased a macbook pro (still in its box) with updated software for my older imac os x. I have a number of Canon related photo editing programs (that came with my 40D digital SLR) and Adobe photo elements 6 for mac on the imac. Following some erroneous advice I have made a complete mess of the pictures folder's content by trying to delete images directly from that folder (there are now 6000+ images in the folder, many of which are duplicates(?). Most of the images are not tagged or labeled and some have been organized in/by iphoto (I corrupted the iphoto's library structure very early on by disrupting and editing its images - which might explain why iphoto had a difficult time 'finding' and displaying some of my photos). The picture folder now holds jpegs, smallRAW images (a Canon 40D photo format) and various duplicates of the orignal images - (some of the duplicates don't display as images, but as jpeg logos, which, when opened contain duplicate image or are completely black) The first time I downloaded RAW images into iphoto 6 the RAW data displayed as a black image. When shooting in smallRAW on the Canon 40D, the camera produces a jpeg image for 'easy viewing and editing in the camera' but it looks as though iphoto 6 made duplicates of the jpeg and the RAW data and stored them in different locals in the picture file. In an attempt to get the number of images down, I have been trying to delete them from the picture folder. (My daughters both download images rather indiscriminately in hopes of 'editing them on the computer' which inevitably does not happen) and there is a lot of experimental bracketing of images - shooting raw and different Camera formats etc., all of which need to be cleaned up before I proceed.
Sometime in the not-too-distant future I would like to have iphoto 9 running on my imac with a clean library of images and a seamless way of downloading, editing and storing images (including the RAW data).
The macbook pro is for my highschool-aged daughter, who will run iphoto 9 but not have any RAW image data on her system. She would like to copy some of the old iMac's images to put into her own iPhoto 9 library (probably using a disk, email or on-line photo service - ideally, I would like to be able to copy and remove a number of those images from my HD and give them to her for the macbook)
A few questions and queries: Can I 'dis-able' iphoto 6, while I delete images (RAW and jpeg) from the picture file? (and is this even a good idea).
Once I have edited the # of images down to a reasonable size, should I re-launch iphoto 6, rebuild the iphoto library and then update to iphoto 9 or skip v6 and rebuild with v9?
And now for the 'how stupid is this guy question' - I really had planned to purchase an external backup; but between new the macbook, car repairs and braces it has never come to fruition. So, I have never properly backed up my images. What is the bare-bones, least expensive method for me to do this? I'd even consider burning everything to disks if that works. I can't afford the $ to purchase a new external hard drive right now (really). Budget is set aside mid-November for one though.
I've been looking through some other discussion boards and it looks like I'm not the only one having RAW image issues. I know that shooting smallRAW with the companion jpeg is probably not helping things but I take my camera equipment on extended canoe trips - and we like the ease of on-the-spot editing with this format.
Thanks in advance for your help - Mark

Terence, Is the picture folder the primary source for the images or does that data reside somewhere else?
If you gathered them there, then yes.
I really don't want to have to go through 14,000 images looking for the pictures that I want to keep (or is that my only option?).
Only you can decide what you want to keep.
Why does the computer keep making copies of the images and filing them under date and events?
That's how iPhoto works. It's not a problem usually, only you did go in there and make a problem, and now we are trying to fix it.
You advise not to muck around in the picture file via preview,
No I don't. I advise not to much around in the iPhoto Library Folder.
but if I download images through a program other than iPhotos - image capture or adobe aren't I doing that anyway?
Adobe what? Adobe is a software manufacturer who make many excellent applications, you need to be more precise. And no, if you import photos with Image Capture or “adobe” no you are not interfering with the iPhoto Library Folder.
Can you edit a base image file somewhere and remove it from the HD without iphoto making a copy of it and storing it somewhere else?
This is stunningly easy. Don't use iPhoto. Use an image editor.
I want to look the negatives, decide which ones I want and throw the rest away. Can that be done or am I way off course?
Yes, and iPhoto (or similar apps) make this really easy.
Hook up your camera. Import the pics to iPhoto. Go through the imported pics. Trash the ones you don't want. Then process the ones you do. But you must learn how to use iPhoto to do this successfully
To trash: put the pic in the iPhoto trash and empty it. This removes the file from iPhoto and the Hard Disk.
Process it: If you want to use another editor: You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Regards
TD

IPhone 4 reset itself, photos lost -URGENT HELP NEEDED

Hi there,
Urgent help needed!!
Tonight I was taking extremely important photos throughout an event on my iPhone 4, however, my iPhone 4 ran out of battery once I was near a charger I plugged it in and for some reason my iPhone had reset itself. Back up icloud options were from yesterday, but the photos that I was taking at the event are needed urgently. Is there any way possible I can recover the photos that were taken?
Thanks in advance!!!!

Slymm71 wrote:
just had similar problem got email from find my phone saying initiating full phone wipe this cannot be stopped ***? i own the phone from new and registerred in m name but wiped whilst i was using it !!!
See your other post...
https://discussions.apple.com/message/18876037#18876037

Quicktime help needed - I have an Imac 800Mhz PPC G4 with OSX 4.11 installed , Quicktime help needed? - I have an Imac 800Mhz PPC G4 with OSX 4.11 installed?

I have an Imac 800Mhz PPC G4 with OSX 4.11 installed, THANKS! Quicktime help needed?

Thanks for your kind reply Quicktime Kirk! Thanks in advance to anyone who replies to this as well. I have heard that what I need is an older Quicktime Version that allows for saving files, etc. But apple does not support it & I should look elsewhere - hence my appeal on this forum. Also, for some reason, when I try to upgrade to Quicktime Pro my browser (both Safari & Firefox) quits as I am about to complete my purchase. In any event, the real question is this: would the Quicktime Pro upgrade be compatible with my current system?

People analyzer not working in photoshop 11 with D800 RAW photos

I have photoshop elements 11. People analyzer will not reconize people or allow me to tag people in my photos. It works with my older camera photos such as from my Nikon D300 but will not work with photos from my D800 (RAW).

As follows:
Elements Organizer 11.0.0.0
Core Version: 11.0 (20120830.r.32025)
Language Version: 11.0 (20120830.r.32025)
Current Catalog:
Catalog Name: Master Catalog2011
Catalog Location: D:\Master Catalog2011\
Catalog Size: 77.3MB
Catalog Cache Size: 741.5MB
System:
Operating System Name: Windows 7
Operating System Version: 6.1 Service Pack 1
System Architecture: Intel CPU Family:6 Model:10 Stepping:7 with MMX, SSE Integer, SSE FP
Built-in Memory: 16GB
Free Memory: 13.5GB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: Not installed
Adobe Reader Version: 9.4
Adobe Acrobat Version: Not installed
CD and DVD drives:
E: (TSSTcorp CDDVDW BUS: 1 ID: 1 Firmware: SH-216AB)

Find text and replace with image - Help needed

Hi, We need to place the images as inline in the appropriate places. texttexttext<<test1.eps>>texttexttexttexttexttext<<test2.eps>>texttexttexttexttexttext< <test3.eps>>texttexttexttexttexttext<<test4.eps>>texttexttexttexttexttext<<test5.eps>>text texttext This code is helpful for placing a single image at a time, we are unable to place all the images in one shot, can anyone help me out. I am not a programmer. ----------- var myDoc = app.activeDocument; app.findPreferences = app.changePreferences = null; var math=document.search("test.eps"); for (i=math.length-1; i >=0; i--) { myDir = Folder.selectDialog(); AllGraphics = Folder(myDir).getFiles('test.eps') for (i=0; i<math.length; i++) { app.select(anil1[i]); myDoc.place(AllGraphics[i],false); } } ----------- Note: I have taken this code from forum and we have made some changes on this. Kavya

Jongware, I try running it but gives errors: Error Number: 55 Error String: Object does not support the property or method 'changePreferences' Line: 24 Source: app.findPreferences = app.changePreferences = null; This is the code I used // Find text and replace with image for InDesign CS3 // http://www.adobeforums.com/webx?128@@.3bbf275d.59b6f012 var heyItsAnArray = new Array ( "it contains this line!", "as well as this one", "or even more!", "test.eps" ); for (arrayCount=0; arrayCount<heyItsAnArray.length; arrayCount++) { replaceImg (heyItsAnArray[arrayCount]); } function replaceImg (name) { var myDoc = app.activeDocument; app.findPreferences = app.changePreferences = null; var math=document.search(name); for (i=math.length-1; i >=0; i--) { myDir = Folder.selectDialog(); AllGraphics = Folder(myDir).getFiles(name) for (i=0; i<math.length; i++) { app.select(anil1[i]); myDoc.place(AllGraphics[i],false); } } } Michael

Problem with Isight or Photo Booth PLEASE HELP

When ever i take a picture with teapot or spotlights or an other dark picture for the matter It comes out all white and pink kind of. It just looks weird and discollored but only pink and white. Please help me ( ps its only the new ichat effects it has problems with and idk how to delete them their the ones on this website from Ismiley)

Camille2345678 wrote:
http://www.apple.com/downloads/macosx/email_chat/moreichateffects.html
the link above is where i downloaded the effects but im not sure how to uninstall them and it doesnt say on the website. When go find it in Finder it says More Ichat Effects Uninstaller and i pressed it but it brings up like Terminal ( i think its some application) and i dont know where to go from there and most of the other effects work but the dark ones dont. Also i tried turning flash off and it doesnt help.
http://i45.tinypic.com/28twfns.jpg
According to the developer's website:
http://ismileys.free.fr/moreichateffects/support/
".... you can launch iChat and Photobooth in 32 bits only..."
If that does not help you, try uninstalling MoreIchatEffects. I do not use MoreIchatEffects, but, again, according to the developer's website,
http://ismileys.free.fr/moreichateffects/
"If you want to remove all effects, run the installer or remove files in /Library/Compositions"
(1) In addition to the extra effects, it appears that the MoreIchatEffects installer adds an uninstaller application that you say looks like Terminal. You should be able to run the MoreIchatEffects Uninstaller application by merely double-clicking its iCon and following any on-screen instructions.
If you need more help with how to run the Uninstaller than you can find from MoreIchatEffects> Help, you can contact the developer for assistance using the information from this page:
http://ismileys.free.fr/contact.html
Based on the "... check the number of your effects. If it isn't a multiple of 8, it will crash always." comment on that page, you may also want to count the number of effects in your Mac's Library/Compositions folder to be sure that is not your problem. If you need help finding the effects files you are to count, see the next paragraph of this post.
(2) If you cannot make the uninstaller work, note that the "Library/Compositions folder" that contains the effects files you can manually delete is the one in your Mac's startup drive Library/Preferences folder. Look in the "Compositions" folder there.
Do NOT remove any files from either the Library folder in your Mac's System folder
or from the Library folder in your ~ (Home) folder.
(3) If you cannot make either method above work for you, you can use your Time Machine backup from a date prior to the time you installed MoreIchatEffects. For help, see:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15638.html
(4) If all else fails, your Apple-Authorized Service Provider can help.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Large image help needed please

Hey all,
I hope you can help - at this point I am nearing tears of frustration.. I have been working with CS4 for a month or so and just got a colour scanner. Installation of the scanner etc. went fine and I can now scan my artwork in to the pc.
I knew there was a problem with scanning stuff in directly through photoshop so I used the software that came with my scanner to get my images. Here's where my problems start!
I can use every graphics program you can possibly care to think of to open the image be it gimp, fireworks or illustrator but I can't get photoshop to open the file - it just hangs and stops responding. I have tried opening it in other software and saving it in various different formats including BMP, TIF, PNG and PSD but nothing I do will get photoshop to open them. I know its not the files themselves because every other program can open, edit and save them.
please help me solve this problem because I know photoshop very well and don't want to have to learn a new program to edit my files in

hobbes09
I thought (hoped) this would have been figured out by now. I'm aware that you cannot scan directly into Photoshop from Photoshop using the Vista 64 version No twain available for 64 bit I believe. However, since you are using the Vista 32 bit is it possible to use your scanner directly in Photoshop?
FILE>IMPORT>TWAIN>CANON SCANNER
Is Photoshop working normally otherwise?

Creating Symbol Instances containing a dynamically set image - Help Needed

I'm working on a site prototype that has many rollover images in the navigation. Each image is unique, but the rollover and rollout code is identical. I'm trying to create a single symbol that can be used for all of the rollovers, but need some help figuring this out, as it will significantly speed up my work.
I think the pseudocode would work like this:
Create a symbol that contains a default rollover image.
In the symbol, add the rollover and rollout code. This adjusts transparency from 0 -> 100 and back.
Create instances of the symbol over each item in the nav.
For each instance, set a variable containing the name of the rollover image to be used.
In that symbol instance, get the variable value.
In that symbol instance, use the image name in the variable to replace the default image.
Question: How do I make step 4-6 work? I have 1-3 working smoothly.P.S. My last dev work was waaaaay back with Director, PHP and ColdFusion. I still get basic principles such as using functions, objects, instances, inheritance etc, but the language has changed. And I have very very little experience with the DOM.
Appendix: How I'm Doing This Manually
There's a background image of the nav showing all of the unselected states
Each item in the nav has a corresponding rollover image, in a series of elements layered on top of nav element. Each rollover has opacity initially set to 0%.
Each image element has rollover, rollout and click triggers. Rollover and rollout triggers are identical for each. There's also a little more code with rollout that provides a quick fade. This means lots of copying identical code. I hate to think about having to change any part of that code.
Thanks! Chassy

Hi there,
Perhaps a more simple solution would be to set up 1 global function that handles over/out states for all your buttons. On mouseenter/mouseleave of each button you would call this function to fade in/out your rollover graphic.
Example:
http://www.timjaramillo.com/code/edge/rollover4_multiple_btns
Source:
http://www.timjaramillo.com/code/edge/_source/rollover4_multiple_btns.zip
Code on Stage.compositionReady (note there are btn symbols called btn_1, btn_2, btn_3, and all have an over state called "over" in them):
var array_btns = ["btn_1", "btn_2", "btn_3"];// array to hold all your btns
function setup_btns()
 // iterate through array_btns, add "mouseenter" and "mouseleave" for all
 for (var i=0; i<array_btns.length; i++){
 // hide "over" state initially
 sym.getSymbol( array_btns[i] ).$("over").hide();
 sym.$( array_btns[i] ).mouseenter({obj:array_btns[i]}, function(e){
 var btn = e.data.obj;
 sym.getSymbol(btn).$("over").fadeIn(500);// show "over" graphic
 sym.$( array_btns[i] ).mouseleave({obj:array_btns[i]}, function(e){
 var btn = e.data.obj;
 sym.getSymbol(btn).$("over").fadeOut(200);// hide "over" graphic
setup_btns();

Watermarking Images - help needed

I need to watermark some images and am really struggling to understand how to do it with Photoshop. I'm a complete novice so please forgive my ignorance.
Please could someone help me out here by explaining in plain language how to do it, if it is at all possible.
Many thanks in advance,

http://movielibrary.lynda.com/html/modpage.asp?id=233
Section 6: actions. Russell Brown's watermarking an image.
J

Lion won't mount image - Help Needed

When I try to mount any disk images to install software from the internet. the image mounts but is then automatically unmounted before I can do anything with it.
Tried, Disk Utility repair, tried mounting from Disk Utility directly, tried reinstalling Lion, still doesn't work. Tried downloading different dmg files from different sources, still the same.
Can someone help with a work around.
MacBook Pro 13", Mid 2010, Lion 10.7.2
Many thanks.
Eric

LiquidCD DOES HAVE mount feature, do not know whether uses its independent mount engine or uses sys engine, as attached. Click on its last icon on upper right, then choose image, then mount. Combined with your testing new user, which does not solve the issue, and still waiting with your testing LiquidCD feature, my guess is that you have a corrupt system or ImageMounter was erased or corrupt.
You may test this by an interim solution: install a new system unto an external disk, if available, or unto a 16 GB flash drive (8 GB is not sufficient), and test there. I think you will do that sooner or later anyway, but is a simple test.

Issue with Multithreading and vertical scroll bar - help needed to debug!!!

I have been working on a desktop Visual Studio 2010 application for quite a few years. It is written in C++ and MFC. This code is a combination of code I have written and code I inherited. It worked great for years on Windows XP, but when I ported
it to Windows 7, a tricky problem has come up that I am having the darnest time trying to figure out
In summary, it is a single .exe desktop application. There is the main thread (thread A), which launches another thread (thread B). Both threads share a pointer to a single window object which displays events. This window also implements a vertical and horizontal
scroll bar.
The interaction and message processing between the threads seems a little sticky to me. Both threads A and B call the same member function of the CWnd object. BUT, Thread B ALSO posts messages to thread A's queue.
So, in thread B, you will see code like this, which makes a direct call to the output window object, AND THEN it also posts a message to Thread A's mainframe window like this...
if( m_pEventLog )
pOutputWindow->AddLine("Some test...");
if( m_phNotifyWnd[RECEIVE] && m_puiEventWMsg[RECEIVE] ) {
::PostMessage( m_phNotifyWnd[RECEIVE], m_puiEventWMsg[RECEIVE], 0, (LPARAM) pPkt );
WHEN thread A receives the message that thread B posted above, it only does the following:
LRESULT CMainFrame::OnSocketReceive( WPARAM, LPARAM lParam )
CSPkt* pPkt;
CRWPkt* pRWPkt;
CSPktSocket* pSocket;
ULONG ulType;
CString csTemp;
CBSWords bsWords;
CSSSWords sssWords;
CRWPkt* pLoopBackRWMsg; // used if we have to send a loopback msg back to sender
CLMsg lmsg;
m_wndTextWindow.AddLine("Test message");
return 0;
So both threads are writing to the output window via the .AddLine() member function.
void COutputWnd::AddLine( CString& strLine, COLORREF crColor )
UpdateVScroll();
return;
And this function then makes a call to :UpdateVScroll(). The problem seems to arise because thread B does a
post to thread A, where thread A in turn writes to the output window. Eventually, the program
HANGS in the call to
SetScrollInfo() below...
void COutputWnd::UpdateVScroll()
CSingleLock lock( &m_CSVertScrollLock ); // lock things up while we are in here
BOOL bok = lock.Lock();
if (lock.IsLocked() == TRUE)
int iMax = m_FifoIndices.GetHighestIndex();
if( iMax < ( m_iMaxViewableLines - 1 ) )
iMax = 0;
//SetScrollRange( SB_VERT, 0, iMax, FALSE );
//SetScrollRange( SB_VERT, 0, 9, FALSE );
SCROLLINFO scrollinfo;
scrollinfo.cbSize = sizeof(SCROLLINFO);
scrollinfo.fMask = SIF_RANGE;
scrollinfo.nMin=0;
scrollinfo.nMax= iMax;
SetScrollInfo(SB_VERT, &scrollinfo, FALSE);
lock.Unlock();
It doesn't take long for the program to hang...maybe about 10 seconds.
When I hit DEBUG->BREAK ALL, I get the output below in the CALL STACK WINDOW.
ntdll.dll!770070f4()
[Frames below may be incorrect and/or missing, no symbols loaded for ntdll.dll]
user32.dll!76c0cde0()
user32.dll!76c018d9()
>
mfc100d.dll!AfxInternalPumpMessage() Line 153 + 0x13 bytes
C++
mfc100d.dll!CWinThread::PumpMessage() Line 900
C++
mfc100d.dll!CWinThread::Run() Line 629 + 0xd bytes
C++
mfc100d.dll!_AfxThreadEntry(void * pParam=0x0022f6a4) Line 122 + 0x13 bytes
C++
msvcr100d.dll!_callthreadstartex() Line 314 + 0xf bytes
C
msvcr100d.dll!_threadstartex(void * ptd=0x004f97c0) Line 297
C
kernel32.dll!762cee1c()
ntdll.dll!770237eb()
ntdll.dll!770237be()
NOTE: If I never make the call to SetScrollInfo(), the program never HANGS.
Sooo....I am trying to determine if there is a fundamental issue with the way the threads are communicating that is causing the issue, or if maybe I have a memory overwrite. It always hangs in ::SetScrollInfo(), no matter what I comment and uncomment. This
makes me think that scroll bat behavior is different in Windows 7 than on XP, but I have not been able to find any documentation about it.
Can anyone provide any insight as to what may be the cause of the program hanging>

It might look like working but it will crash eventually. The windows are thread affine and other thread must never touch other threads windows. Sometimes you might get along but usually it just crashes.
Thread B must use PostMessage ( or SendMessage if suncronous action is require) to thread A's windows to achieve correct updating. Some very basic calls are implemented directly with SendMessage so they are safe to use but then you must individually check
which ones are safe.
Also having multiple SendMessage calls from B to A require rendezvous which might cause other problems ( thread B stalls or program deadlocks, depending on other program structure).
So PostMessage is the way to do it ( or create yourself another inter-thread mechanism, possible but usually too much troble)

Storing photos in iCloud, help needed.

Using my iPad I moved photos from photostream into iCloud, I created albums. Yet when I go into iCloud using my iPhone there's no sign of the albums.....anyone know why? I thought once yous tired photos in albums in iCloud you could view them from any of your iCloud devices.....am I wrong thinking this??

How come albums in iCloud created on my iPhone are now on my iPad though........ Could it be because of when I hook it up yo my PC???? I might hook iPad up to PC to see if albums in iCloud also end up on iPhone......

Photomerge with 125 RAW photos, 16 megapixel images, Help Needed

Similar Messages

Maybe you are looking for