Photomerging two layers?

Hello,
Is there a way to photomerge two layers instead of two files in photoshop?
Thanks.

You need to put the targets over the mouth and eyes in both pictures and click Align. However, if there is a big difference in angle in the originals, it's just going to look weird. Group shot is meant for situations where everything in both photos is the same except maybe someone has their eyes closed in one photo and not in another, not for taking two completely different photos and combining them.

Similar Messages

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler

Synchronizing movement of two layers

I have a feeling I'm using the hard way to accomplish something simple, so I hope someone here can straighten me out.
What I'm doing is drawing an "indiana jones" type line over a moving 'map' layer (approx. 18" x 36") — moving generally left to right, but also some ups & downs. So, the line, as it's being drawn, and after it's drawn, has to move precisely in sync with the layer below.
I have no problem creating the line. Been there, done that before. But, never tried syncing a line with another layer that's in motion. As I'm currently doing it, it's very time consuming.
I tried a copy & paste of the keyframes from the 'map' layer to the line layer but that didn't work out too well. What I'm currently doing is manually keyframing the line about every 30 frames, but I'm thinking there has to be a faster/easier way to do this. So far I've keyframed about 1 minute, and have about 8 minutes & 12,000 more keyframes to go.

Problem solved.
I decided to trash the project file that I've been struggling with, sending a lot of hours down the drain, but it felt like the right thing to do. Then:
First, I opened a new project.
Second, I imported the large image file.
Third, I opened a new layer.
Fourth, I grouped the two layers.
Fifth, I drew my line on the grouped layer
Sixth, I keyframed the group with the desired motion.
Now the movement of both layers are in sync. It was quick & easy.
Where I went wrong, which lead to starting this thread, is that after I imported the large layer, I keyframed the motion I wanted.
Next I opened line layer, drew the line, and keyframed it.
Then I grouped the two layers. So, even tho the layers were grouped, each was separately keyed, which caused the undesired result.
So, Kyriakos, I did in fact have a grouping problem. Not that I didn't group as you supposed, but that I grouped too late in the process -- which in turn lead to my keying the two layers individually, rather than as a group. Anyway, that's close enough for me. I'll give you credit for the solution.

Two layers with "dissolve"

I'm on CS3 with OS10.4.11
I have a photoshop document where I had two layers each with a shape of solid colour. In the top layer I had blend mode "Dissolve" and then reduced its opacity to get the speckled/distressed look.
If I merge the two layers or flatten the document the end result is softer and blurry; it loses the sharpness which is visible in the original format.
Is there any way I can flatten it and keep the sharpness?

View at 100% (View>Actual Pixels) to see how the Dissolve Blend Mode will look when flattened.

Is it possible to perform Clone Stamping on two layers simultaneously?

Hi,
I have two layers, one is a colour stone texture, another is a black and white heightmap of the same image.
I want to repair a few areas, but it's essential that the two layers stay in sync, i.e. whatever cloning is done to the colour layer must be the same on the heightmap layer.
Neither layer contains any transparency.
If not is there any other way I can achieve the same end result?
Thanks
Steve

I don’t think this is easily achieved as Clone Stamping does not record as an Action.
One rather clumsy work-around would be to work with Smart Objects –
• convert one Layer to a SO
• copy, move and mask that to cover a blemish
• repeat as necessary
Then
• duplicate the file and
• replace the SO’s content with the other Layer and update
This would be reasonable only with a very small number of corrections and/or smallish files, though.

To move an image behind a part of our "first picture", as if two layers are overlapped !

Hello,
I'm french, and I already posted a question a few times ago, on this forum and I was very satisfied with your quick answers, so I come ask again a little question...
It's about Photoshop CS6 and I would like to know if it's possible to move an image behind a part of our "first picture", as if two layers are overlapped (the first picture and the picture that I add !) and one layer was partially hidden by the first !
It's quite complicated to understand and explain... I know ... and I'm very sorry ...
Example: If I want to move a book behind furniture (which is located in the center of my "background" or "first picture", surrounded by a nonuniform setting !), so to see only part of the book and the other part is hidden by the furniture ! Like the picture below (where we see that the "Coraya" is behind the desk !!) :
I thank you in advance for all your quick responses and I congratulate you in advance to your understanding and your professionalism about Photoshop !
Makarsh

Makarsh,
One easy way to accomplish that look is to add a Layer Mask to the "book" Layer, in the shape of the furniture, that you wish to hide part of the book behind.
That would probably be easier by creating a Selection for that part of the furniture, with the Selection Tool of your choice. I personally like to do such work with the Pen Tool (creates a Path), as it is very exact. However, if one is not comfortable with the Pen Tool and Paths, then the Lasso (perhaps constraining it for straight lines) might be easier. If you do use the Pen Tool, when complete, go to the Paths Panel, and from the little arrow in the top-right, choose Make Selection.
Then, with that Selection still active, go to the book Layer, and click on the Create Layer Mask icon, at the bottom of the Layers Panel.
If necessary, you can do touchup to that Layer Mask, after it has been created.
Good luck, and hope that helps.
Hunt

Dynamically parent two layers together with expressions

In AECS6, I have an Image Layer that is using the layer directly above as a Alpha Matte. I want both layers to scale at the same time, unless a certain condition is setup where I only want the matte to scale - leaving the image at original size. Normally I'd just make a new pair of layers and only scale that, but ALL my layers are dynamically linked to eachother for another more complex effect.
I wrote a simple expression to get the current scale of the matte layer (index-1), and then calculate what this particular layer's scale should be. But the scales don't match up just right because we are dealing with percentages... not absolute values. However, if I simply parent the two layers together, it of course works.
So, I either need to find a way to turn the parenting on/off with code, like if THIS, then ParentTo(index-1), or I need to write my scaling script correctly.
Fwiw- here's that script:
if (index != 15)) {
// get the original and current scale value of the layer just above, and calculate an offset
          sOrig = thisComp.layer(index-1).transform.scale.valueAtTime(0)[0];
          sNow = thisComp.layer(index-1).transform.scale[0];
          sOffset = value[0] + (sNow - sOrig);
          [sOffset,sOffset]
} else {
// this is layer index 15, don't do anything with it
          value;
Appreciate the help!

Not sure what you are getting at, but the actual value ranges do not really matter in an expression. It's more likely you are eitehr having an anchor point issue or your keyframes are simply not linear. in the latter case of course a simple subtraction would not give the correct result because values would be exponential/logarithmic/whatever. You'd have to use much more complex code then to accumulate all values over time such as the great Dan Ebberts explains on his website:
http://www.motionscript.com/articles/speed-control.html
Anyway, I suppose you could always use effects rather than native transforms to scale your matte while still leaving it parented. Y' know, there is a Transform effect... That would be much simpler and also avoid the expression evaluation bogging down your system...
Mylenium

Synchronizing motion for two layers

Ok. I'm more than a little frustrated trying to get this to work. Any help would be most appreciated.
I've got two clips. One is a still image serving as my background. the other is an illustration of a man standing stationary in the foreground. The layer of the man is on top of the background layer.
My problem occurs when I zoom in on the standing man. It is extremely difficult to get the scale and key frames for both layers to sync up. That is it is proving difficult to make both the man and background appear to be inhabiting the same "space" rather than independent layers.
Is there a way to lock the two layers together so that changes made to the motion tabs in the scale and center of one layer are the same for both? I'm sure there is but just can't seen to figure it out on my own.
Thanks,
Greg

Hi -
On the bottom left corner of the timeline, press Toggle Clip Keyframes or type Option-T.
This will display the keyframes for a clip on the timeline. The blue line is the motion keyframes, the green is any keyframes you have applied to filters.
With those keyframes now displaying on the timeline, the Playhead will snap to them if you have snapping turned on (type "n") and it should make it easy for you to place you keyframes to match keyframes you have placed on other clips.
MtD

Speed up intersection of two layers

Hi,
I'm trying to make an intersection of two layers work faster. First I create an empty table:
create table shptmp as
select sdo_geom.sdo_intersection(t1.geom, t2.geom, 0.005) intersect_geom,
t1.id, t2.id from SHPTABLE1 t1, SHPTABLE t2
where rownum < 1;
Then I fill this table with intersection-polygons:
insert into shptmp2
select c.intersect_geom, id1, id2 FROM
(SELECT /*+ ORDERED */ sdo_geom.sdo_intersection(t1.geom, t2.geom, 0.005) intersect_geom, t1.id id1, t2.id id2 from SHPTABLE1 t1, SHPTABLE2 t2
where SDO_RELATE(t2.geom, t1.geom, 'mask=ANYINTERACT querytype=JOIN') = 'TRUE') c
WHERE SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT(c.intersect_geom, 0.005) = 'TRUE';
SHPTABLE1 and SHPTABLE2 both contain about 2000 polygons and multipolygons, and they have R-tree indexes. My resulting table shptmp contains about 9000 records when the query has finished. Anyway, it takes more than an hour to run the intersect-query. Is this a normal response-time for a spatial overlay of two layers? When I do something like a Union in ESRI ArcMap it only takes seconds or maybe minutes. Any ideas how to speed up this query? By the way my Oracle version is 9.2.0.1.0.
Thanks,
Anja

Anja,
An hour seems too long. Is there a spatial index defined on the temp table?
Could you share your dataset so we can try to recreate the issue?
I tried the following on a Linux server running Oracle 10.1.0.4
SQL> select count(1) from map_airports_us ;
COUNT(1)
2346
Elapsed: 00:00:00.01
SQL> select count(1) from MAP_ADMIN_AREA4_US ;
COUNT(1)
28835
Elapsed: 00:00:00.02
SQL> select distinct t.geometry.sdo_gtype from map_airports_us t ;
GEOMETRY.SDO_GTYPE
2003
2007
SQL>
1 select count(1) from
2 (
3 select /*+ ORDERED */ sdo_geom.sdo_intersection(a.geometry, b.geometry, 0.05) from
4 table (sdo_join('MAP_AIRPORTS_US', 'GEOMETRY', 'MAP_ADMIN_AREA4_US',
5 'GEOMETRY', 'mask=ANYINTERACT')) c, map_airports_us b, MAP_ADMIN_AREA4_US a
6 where b.rowid = c.rowid1 and a.rowid = c.rowid2
7* )
SQL> /
COUNT(1)
2097
Elapsed: 00:01:33.17
SQL>
1 select count(1) from
2 (
3 select /*+ ORDERED */ sdo_geom.sdo_intersection(a.geometry, b.geometry, 0.05) from
4 map_airports_us b, MAP_ADMIN_AREA4_US a
5 where sdo_relate(a.geometry, b.geometry, 'mask=anyinteract querytype=window')='TRUE'
6* )
SQL>
SQL> /
COUNT(1)
2097
Elapsed: 00:02:00.64
SQL> SQL> create table tempint (id1 number, id2 number,
2 geometry sdo_geometry);
Table created.
Elapsed: 00:00:01.01
SQL>
SQL> insert into tempint
2 select /*+ ORDERED */ b.polygon_id, a.polygon_id,
3 sdo_geom.sdo_intersection(a.geometry, b.geometry, 0.05) geometry
4 from table (sdo_join('MAP_AIRPORTS_US', 'GEOMETRY', 'MAP_ADMIN_AREA4_US',
5 'GEOMETRY', 'mask=ANYINTERACT')) c, map_airports_us b, MAP_ADMIN_AREA4_US a
6 where b.rowid = c.rowid1 and a.rowid = c.rowid2 ;
2097 rows created.
Elapsed: 00:02:22.63
SQL>
So 2 minutes seems more like the right figure.
Jayant

Button photoshop, only two layers?

Hey.
I'm iMac21".
Putting a photoshop button only allows me to use two layers, but I want to use three, one for stationary button, one for and one for active rollover. But do not let me.

Hi Pablo,
I'm not sure what the behavior is in your case but normally the layers should be filled in this order if not all states are selected: http://screencasteu.worldsecuresystems.com/Cristi/2012-06-16_1052.swf
From left to right I set all four states and the last one has one state selected, the other states are selected automatically, because they need to be filled.
Use PM and send me a link where I can download you file to test it locally if needed.
Cheers,
Cristian

Mask the difference between two layers

Hello everyone. I have a problem that I feel should be solvable, but I just can't figure it out.
I have three elements:
Static image of the background of a gym
Full-body video of a person doing an exercise (they take up the center 1/5th of the frame) with the same background
Title text
The effect I'd like is so that the title text (large, bold font that spans the width of the window) is masked out by the person, in a manner similar to how magazines' titles will be masked (examples here, here, and here).
When I put the two layers on top of each other and set the top's blend mode to Difference, I do indeed only see the person (albeit in psychedelic colors). I just can't figure out how to use that as a mask to hide those parts of the title.
Exercising person:
Background:

The image is a combination of a few slight movements
When there is movement, the two images can't easily be used with a difference matte. I suppose if you could match them up perfectly, you could crop out the edges.
I'm not sure what you mean by different format - surely a still image and video are going to be different formats?
One is a JPG and one is a PNG. It looks like the tripod moved.
In any case, if it works OK for you, then great.
If you set it up right, then you could probably use levels to crush the blacks and lighten up anything else, turning it in to a matte. But since his hair looks black, it complicates things a bit.

Scaling two layers up without losing position

Greetings,
I've got two video layers, one a standard clip and the other a motion-tracked layer with a mask, parented to a null object. (I've made a girl's body red, and her face black and white)
I've got key frames set on the masked layer for layer position and mask shape.
Both layers are at 70%. I would like to scale them up, but whenever I do I lose the position of the face, it ends up moving to the right. Is it a problem with scaling something after it has position keyframes?
Any way to fix this?
The closest thing I found to a answer was to parent everything to a null layer, then scale the null layer. But since I've already got the face parented to a null layer, I'm not sure where to go. This is a noob question I know and I searched for a answer, honest! But I'm not even sure how to phrase my search terminology for this.

A simple answer as I suspected! Thank you so much. I've had casual experience with AE for many years, but am now really trying to take it to the next level with motion tracking and compositing. So I will have many more questions I'm sure. I appreciate everyone's patience with me. Cheers!

Is there two layers of audio on imovie or idvd

I just finished A 300 picture presentation on Vietnam for a friend using keynote(excellent program). Each picture has a different show time(10 - 20 seconds) because of amount of text on it and info in the picture. We want to include back ground music for the presentation but also do a voice over on some to explain whats going on in some of the pictures. Does either Imovie or Idvd have two audio layers or do I have to use final cut which I can but then I have to go back through all the stills and reset the play time. Thanks karl

You are mindless!!! Just kidding.
You are forgetting the Database is an operating system. The operating system (database) has Data, Users, and Account, Methods.
There is an association between a User and an Account. When a user logs onto any operating system there is data/properies that is owned by the user. The properties are obtained by the operating system from the Account when you log.
The OOP objects in a database are tables. Normally OOPs refers to class object, but a database table can be considered a class type object. The association in a database is where two or more tables share a common field. You can use a SQL
Join statement to combine database tables by there common fields.
jdweng

Copying two layers through same selection mask produces different dimensions on new file

Hi all,
This is driving me insane!
I'm creating an animation in AE eventually but initially have two hand drawn images of the same object that I've scanned into PS.
I have a single mask created that I turn into a selection to copy the two images to output as new single files to then import as 2 frame png sequence into AE.
Normally, and this is critical, the dimension of the new files would/should be exactly the same.
But they're not!
How is this possible, the selection is the same for both layers.
Any suggestions, help, assistance, very much appreciated.
thanks
Yan

yancowles wrote:
Still annoying though, I'm creating the double drawn animation effect and it would help if I could make the new files to exactly the same dimensions quickly and easily somehow.
Menu file>Save As to create a new file Photoshop is not a file editor. For a new document the same size menu File>New or Ctrl+N then use the preset pull down menu and select the open document that has the size you want.
You can also script a new document from selection.
/* ==========================================================
// 2009 John J. McAssey (JJMack)
// ======================================================= */
// This script is supplied as is. It is provided as freeware.
// The author accepts no liability for any problems arising from its use.
// Download from the web and fixed to work better
<javascriptresource>
<about>$$$/JavaScripts/NewDocumentFromSelection/About=JJMack's New Document From Selection.^r^rCopyright 2009 Mouseprints.^r^rJJMack's Script.^rNOTE:New Document From Selection!</about>
<category>JJMack's Script</category>
</javascriptresource>
// enable double-clicking from Mac Finder or Windows Explorer
#target photoshop // this command only works in Photoshop CS2 and higher
// bring application forward for double-click events
app.bringToFront();
// ensure at least one document open
if (!documents.length) alert('There are no documents open.', 'No Document');
else main(); // at least one document exists proceed
//                            main function                                  //
function main() {
          try {
                    // Set the ruler units to PIXELS
                    var orig_ruler_units = app.preferences.rulerUnits;
                    app.preferences.rulerUnits = Units.PIXELS;
                if(hasSelection()) newDocFromSelection();
                    // Reset units to original settings
                    app.preferences.rulerUnits = orig_ruler_units;
          // display error message if something goes wrong
          catch(e) { alert(e + ': on line ' + e.line, 'Script Error', true); }
//                           main function end                               //
function hasSelection(doc) {
          if (doc == undefined) doc = activeDocument;
          var res = false;
          var activeLayer = activeDocument.activeLayer;          // remember active layer
          var as = doc.activeHistoryState;                    // get current history state #
          doc.selection.deselect();
          if (as != doc.activeHistoryState) {                    // did the deselect get recorded
                    res = true;
                    doc.activeHistoryState = as;                    // backup and reselect
          activeDocument.activeLayer = activeLayer;          // insure active layer didn't change
          return res;                                                   // return true or false
function newDocFromSelection() {
          var AD = app.activeDocument.name;      // remember current document name
        /* the following code seems to be from the script listener what it
            does is to add a layer via copy selection ( Ctrl+J) which will fail
            if the select area of the active layer is empty then code then creates
          a new documents with a normal layer cotaining the contents of that layer */
          executeAction( charIDToTypeID('CpTL'), undefined, DialogModes.NO );//
                    var desc5 = new ActionDescriptor();
                              var ref2 = new ActionReference();
                              ref2.putClass( charIDToTypeID('Dcmn') );
                    desc5.putReference( charIDToTypeID('null'), ref2 );
                    desc5.putString( charIDToTypeID('Nm '), "NewDoc"+documents.length.toString());
                              var ref3 = new ActionReference();
                              ref3.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
                    desc5.putReference( charIDToTypeID('Usng'), ref3 );
                    desc5.putString( charIDToTypeID('LyrN'), "From Selection" );
                    executeAction( charIDToTypeID('Mk '), desc5, DialogModes.NO );
                    app.activeDocument.trim(TrimType.TRANSPARENT);          // trim new document transparency
                    activeDocument = documents.getByName(AD);          // retun to the old document
                    activeDocument.activeLayer.remove();                    // delete layer added via Ctrl+J

Resizing images on two layers to the same size?

OK, it's kind of difficult to explain but what I am trying to do is create posters in pages and I am pasting photographs in there from different layers of the same photo and then resizing them. But the trouble is getting both to the same size, is there an autosnap feature for this or something?
I find it kind of irksome when I create an image and resize it to a specific dimension in preview then copy+paste it into a Pages document of the same dimensions and it resizes it smaller.
How do I get it to the same size without manually dragging the corners with my mouse?
Does that question make sense? Can anyone help?

Actually I just found a neat way to do it in GIMP (great peice of software BTW) the question remains of how to resize it in Pages...

Photomerging two layers?

Similar Messages

Maybe you are looking for